These are PHILIPS cartridges that are rarely in stock. While the sound quality has unique softness, it also has a sense of glamor that takes advantage of the wide range (Murakoshi Yoichi)
Maintenance information: 2026.2.27 sound output confirmed
Accessories: none
Main specifications: mm type output 4.3 mV needle pressure 1.5 to 3 g (optimal 2 g) playback frequency 20 to 50,000 Hz load resistance 47 kΩ dead weight 6 g
*Lead wires and screws are missing. The current headshell, which uses special stainless steel and specializes in sound quality, is now in stock. You can see how each one was carefully crafted. Another point is that the useless meat has been scraped off and made of stainless steel, yet the weight is comparable to that made of ordinary aluminum. (FUJISAWA KOSHI)
Maintenance information: 2026.3.2 continuity confirmed
Accessories: No accessories
Main specifications: Material: stainless steel; Weight: 12 g
The top model from WiiM, which is recommended for getting started with network audio, is now in stock for the first time at Hi-Fi. It is also possible to play on a streaming service or network from a NAS, use it as a media server for WiIM devices or DLNA devices by connecting to external storage via a USB terminal or network, and connect to Bluetooth headphones or earphones. It is an ultra-multifunctional model equipped with a wide range of inputs and outputs such as line, phono, and digital. (FUJISAWA KOSHI)
Maintenance information: 2026.2.28 Operation confirmed
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: Main streaming sources: Spotify/Tidal/Google Chromecast Audio/Qobuz/ iHeartRadio/DLNA/Squeezelite/Roon Ready/QobuzAlexa/built-in etc. W211 x H72 x D200 mm 1.42 kg
The price has been drastically reduced. 2026/2/25 sales price 148,000 yen Maintained! Saran net is out of stock. Harves's masterpiece speaker system developed by Alan Shaw. A popular model with instrumental expressiveness due to the good sound of the enclosure. The supple and vivid reproducibility of classical and vocal sources is a speaker that is supported by audio designers and the like. On the exterior, small repair marks, dullness, and a feeling of use can be seen on the woofer edge on one side (Kobayashi Hitoshi)
Maintenance information: 2025.6.19 Exterior maintenance completed (exterior cleaning/repair/stain coloring, edge cleaning/hole repair, rear baffle detachment, jumper terminal cleaning)
Accessories: jumper (general purpose) saran net missing
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type usage unit, 20 cm cone type/2.5 cm dome type for high frequency, playback frequency band 60 Hz to 20 kHz output sound pressure level 87 dB impedance 8 ohms dimensions W273 x H525 x D287 mm weight 13 kg
ROYD speaker stand. This stand has a smart design yet is sturdy and has a sense of stability. Spike is out of stock (Oikawa Tetsuji)
Accessories: none
Main specifications: Top plate: W200 x D185 mm Pedestal: W410 (maximum) x D280 x H565 mm (excluding spikes) 6.5 kg (actual measurement)
The disposal price has been reduced! Member prices are not applicable. 2025/11/26 sales price 8,000 yen This is a STAX condenser type (CP-X) arm pipe. There aren't many single items in stock, so don't miss it (Tamura Eiji)
Maintenance information: 2025.11.26 continuity confirmed
Accessories: none
The disposal price has been reduced! Member prices are not applicable. 2025/12/15 sales price 5,000 yen*The disc stabilizer and suction unit are out of stock and only the plate is cheap. Please use it as a heavy turntable. There is deterioration in the sealing rubber. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: diameter 305 mm height 10 mm weight 1 kg
※Saran net is out of stock. Internal and external maintenance has been applied and brushed up! This is a model equipped with an LE14C coaxial 2-way unit. Not to mention the localization of the sound, the sound is finished with a good balance between sense of volume and sound quality. For those who like jazz, there is a sense of unity with the sound of the instrument, and it plays a wonderful sound with a sense of realism. The exterior is beautifully finished. Serial 61864/61895 (Tamura Eiji)
Maintenance Information: 2026.2.18 Maintained (enclosure polishing, oil/wax painting. baffle paint. Unit maintenance: edge softening treatment, corn paper coating, terminal cleaning/screw replacement, frame polishing. Network maintenance: frequency characteristics check, ATT cleaning, terminal cleaning/screw replacement. (Detachable unit)
Accessories: ※Saran net missing
Main specifications: 2 way 2 speakers LE14C/LX2-1 W360 x H600 x D300 mm weight 20 kg
The disposal price has been reduced. Member discounts are not applicable. 2026/2/9 sales price 118,000 yen with dedicated stand! The compact 2-way BS Series 243 is now in stock. This series is popular for its wide range, large sound field, and detailed tone. As a practical all-purpose machine, it sounds all genres in high quality. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.2.6 operation confirmed
Accessories: saran net, jumper, stand
Main specifications: type 2-way bass reflex (anti-magnetic) frequency characteristics 41 to 50,000 Hz efficiency 87 dB impedance 4 ohms size H285 x W170 x D232 mm 5.2 kg stand: W240 x H700 x D290 mm 7.5 kg top plate (top plate) W160 x D210 mm
The price has been reduced. 2026/2/12 sales price 89,800 yen*Inexpensive because the remote control is out of stock. An impressive pre-main amplifier with Yamaha's traditional retro design. It is an amplifier that inherits the characteristics of the delicate and elegant old-fashioned YAMAHA sound. It has a PHONO input and features a balanced ease of use in all aspects. There are small scratches and dirt on the exterior of the serial Y028877XZ (Hiura Katsuji)
Maintenance information: 2026.2.9 sound output confirmed
Accessories: instruction manual power cable
Main specifications: full stage balance amplification output 90W+90W (8Ω) Phono (MM/MC) W435 x H137 x D465 mm 22.7 kg
*Currently sold, the remote control is out of stock. Standard model in the ES series. Using a current pulse D/A conversion system, you can listen to dynamic sounds unique to the heyday of sharp CDs. There are 2 systems with fixed and variable analog outputs, and direct connection to a power amplifier is also possible. The exterior has dullness and small scratches. Serial 200631 (Yonejima Satoshi)
Maintenance information: 2026.2.12 Operation confirmed
Accessories: No accessories
Main specifications: current pulse D/A converter, full feed type, digital filter, 2 analog outputs, 1 optical digital output system, W430 x H125 x D345 mm, 6.6 kg
The disposal price has been reduced. Member prices are not applicable. 2025.6.6 Selling price 2,000 yen Silver shell with unknown details. Lead wire is out of stock (Oikawa Tetsuji)
The price has been reduced. 2025/11/7 sales price 448,000 yen 2019 restored model! The original model 8 is now in stock! This is a famous gem that has both thickness and sex appeal while making a quick sound. There is no boomy sound, which is a drawback of vacuum tube amplifiers, and it is a vintage sound that is still popular today due to its good tone and good balance. The exterior is in a state where there is a feeling of use such as dullness and friction over time. ※The hood is out of stock. Serial 2494 (Yamato Yuki)
Maintenance information: 2019.9.21 Maintained (replaced due to defective block capacitors. Electrolytic capacitors were replaced with SPRAGUE ones. SP terminal deterioration replacement. Foot leg damage and deterioration replacement. BIAS reconditioned vacuum tube socket and RCA jack caulk repair. Other operations have been checked)
Accessories: none
Main specifications: 117V specification vacuum tube EL34 (TELEFUNKEN x 4), 6CG7 x 2, 6BH6 x 2 output 35W+35W W346 x H192 x D250 mm 21.9 kg
Orthophone CA25D headshell It is rare that only shells are in stock. If you are looking for one, by all means (Daiki Goto)
Accessories: none
Main specifications: dead weight 22g (actual measurement)
*Remote control is out of stock. Currently sold. A slim, space-saving FM/AM synthesizer tuner. It is an orthodox standard machine with ease of use and functionality, such as being thin yet equipped with a 40-station memory function. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.1.24 Operation confirmed
Accessories: power cord
Main specifications: FM/AM tuner W434 x H75 x D242 mm weight 2.5 kg
※The lead wire is out of stock. It is a highly rigid shell just like Audio-Technica. It appears to be an accessory to the AT-1007. The 2-piece structure makes it easy to adjust the overhang. (FUJISAWA KOSHI)
Maintenance information: 2026.1.19 continuity confirmed
Accessories: No accessories
Main specifications: aluminum press dead weight 6g
The price has been drastically reduced. 2025/8/14 sales price 69,800 yen ※The remote control lid is out of stock, so it's cheap. Maintained in 2014. A preamplifier that can be operated by full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function), high pass, low pass filter (2 levels each), etc., making it convenient. The exterior has line scratches on the top plate and other scratches overall (Mizusaki Ryo)
Maintenance information: 2025.8.14 operation confirmed
2014.12.13 Maintained (disconnected due to AC fuse deterioration → replaced. Check internal capacitors, relays and transistors → OK. Since the remote control switch cannot be dismantled, it cannot be cleaned. Operation check OK)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input (mm) W321 x H80 x D255 mm 3.3 kg
The price has been reduced. 2025/12/8 sales price 89,800 yen. *Remote control is out of stock. Manufacturer maintenance was completed in 2024. A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. Serial 20216 (Hiura Katsuji)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: none
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/4/23 sales price 69,800 yen*Inexpensive because the rubber cover on the outer circumference is out of stock. Maintained! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.4.23 maintenance completed (pad dampener replacement, speaker terminal screws and insulation bushing replacement)
Accessories: original box (2447H)
Main specifications: Throat diameter 3.8 cm, 16 ohms, frequency characteristics, 500 Hz to 20 kHz, 15.5 kg (actual measurement)
※Inexpensive because the remote control is out of stock. A dedicated player for Rotel's high-end CDs. Equipped with the Wolfson WM8740 DAC chip with 192 kHz/24 bit resolution, you can enjoy clear, natural, and high-resolution sounds (Murakoshi Yoichi)
Maintenance information: 2025.11.28 sound output confirmed
Accessories: power cord
Main specifications: W431 x H104 x D320 mm 7.4 kg
※Some weights are out of stock, so it's cheap. Comes with original box! Nagaoka balance type needle pressure gauge. Place a weight on one side of the balance and adjust the needle pressure to your liking. The weight is 0.25g 1 piece, 1g is 1, and 2g is 2 pieces (Oikawa Tetsuji)
Accessories: original box, instruction manual, brush, tweezers
This is a pulley whose manufacturer, model number, and frequency are unknown. The head is painted red. If you have come to this shape, how about stock (Murakoshi Yoichi)
Accessories: none
Main specifications: length 30 mm, shaft hole diameter 5 mm, maximum part width approx. 9.5 mm (actual measurement)
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg