The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
Tigron's 3-disc tuning spacer suppresses complex resonance that occurs in the installation environment of audio equipment, musical instrument amplifiers, etc., and brings out the original performance of the device. There are footprints and a sense of use (Oikawa Tetsuji)
Accessories: original box
Main specifications: size, diameter: 70 mm, thickness: 3 mm, material: special heat-resistant synthetic rubber, magnesium alloy, load capacity: 30 kg/1 piece
This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed)
Accessories: power cable
Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/28 sales price 29,800 yen*Currently sold! The CD player and auto reverse cassette deck are integrated. This is a space-saving model compatible with 3 media that can also be recorded and played back using a USB memory. The exterior has a feeling of use such as dullness. ※The sound shakes slightly when recording and playing back the cassette. Serial 0040112 (Tomoho Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: remote control instruction manual
Main specifications: external dimensions 435 mm x 145 mm x 288 mm, mass 5.1 kg
※Because it smells like tobacco, it's cheap. 2IN/2OUT USB audio interface in the most compact body in the series. In addition to simultaneous microphone and guitar input, it is also compatible with audio applications with RCA line input/output. Serial 1890186 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 simple operation confirmed
Accessories: AC adapter
Main specifications: power consumption 2.5 W 146 x H55 x D120 mm 623 g
Maintained! Single stereo power amplifier using 2A3 output tubes. You can enjoy the aftertaste of sound and air unique to vacuum tubes. It expresses vocals and string music in a sweet and glamorous manner. This is a well-built car at an affordable price. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 maintenance completed (power supply capacitor replacement, RCA jack replacement, cord clamp added to keep unused wire away from heat source, fixed solder defects, vacuum tube pin cleaning, bias check ham balance adjustment, output approx. 4.5 W (current load set to 8 Ω), interior and exterior cleaning)
Accessories: power cable
Main specifications: rated output 3.5W+3.5W vacuum tube 2A3 x 2 6H8C x 2 5U4G x 1 W360 x D210 x H190 mm 16 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/5/30 sales price 12,000 yen. Simple conduction has been confirmed, but the details have not been checked. Sony electret condenser microphone Can be used with AA batteries (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple conduction confirmed
Accessories: instruction manual, case, windscreen x 2, holder clip
Main specifications: frequency characteristics 40 to 15,000 Hz omnidirectional 250 ohms maximum input sound pressure level 122 dB
The price has been reduced. 2024/5/2 sales price 99,800 yen SACD multi playback player. HDMI compatible A player with a core that looks like it was made by Sony and makes you feel that the range is wide. The high quality that can be relied upon as a playback device in everything is attractive. Equipped with a super audio D/A converter with a DSD filter+multi-level D/A converter system. There are line marks and dents on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: remote control, power cable, copy of instruction manual
Main specifications: [during SACD playback] Playback frequency range 2 Hz to 100 kHz, frequency characteristics 2 Hz to 50 kHz (-3 dB), dynamic range 110 dB or more, total harmonic distortion ratio 0.0012% or less [during CD playback] frequency characteristics 2 Hz to 20 kHz, dynamical clean 100 dB or more, total harmonic distortion ratio 0.0017% or less L [digital output] HDMI x 1, optical x 1 (CD only) [analog output] XLR x 1 ・RCA x 1 W430 x H124 x D390 mm approx. 10.2 kg
Maintained! A hit model during the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 212487 (Hiroki Aso)
Maintenance information: 2024.4.26 maintained (MUT switch, push slide, SW exchange, volume VR, sound replacement, speaker relay due to deterioration, 14 parts replacement, other input selector, cartridge selector, each SW disassembly contact, polishing grease application, etc., DC bias balance adjustment, each input/output sound output check)
Accessories: copy of instruction manual
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
※The remote control is out of stock, and it is currently sold because it is cheap. Sansui's 14-band split equalizer. It's a playful product with a detachable remote control that fits on the front panel. The band is divided into 14 bands, and left and right adjustments can be made independently or simultaneously (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual
Main specifications: W430 × H111 × D303mm 4.1 kg
It is a preamplifier that can obtain more satisfaction than directly connected to a power amplifier in terms of sound image positioning, bass volume, and resolution. The cost performance is tremendous, and it is the best amplifier for serious audio projects in the future. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.4 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: line input RCA x 5 · TAPE x 2 · PHONO x 1 (MM/MC) line output RCA x 2 · TAPE out RCA x 2 size W431 x H99 x D337 mm weight 7.7 kg
The price has been reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
※1 bottle only. Currently sold. A full range of 8cm high grade glass cloth cones. It has a light, unobtrusive sound and is recommended for pop music and female vocals. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.2.17 sweep test good
Accessories: No accessories
Main specifications: 6Ω 84dB 20W 0.54 kg
PSE certified product. Matsushita's classic power plug opened up the world of audio power plugs. It is a long-time hospital-grade seller that can be used by beginners to advanced users (Tomoho Asae)
Accessories: original box
The price has been reduced. 2024/5/3 sales price 99,800 yen Hi-Res compatible USB-DAC, DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg
Pre-main amplifier with USB-DAC. A jitter-free design that blocks input system jitter for all digital inputs, not just USB. All USB, optical digital, coaxial digital, and analog inputs are upsampled to 192 kHz/24 bit to perform excellent signal processing with high sound quality. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: remote control, power cord
Main specifications: audio format USB: DSD 2.8 MHz/5.6 MHz (DOP method) to 192 kHz/24 bit (linear PCM), OPTICAL/COAXIAL: ~ 192 kHz/24 bit (linear PCM) output 13W+13W (8Ω) digital input USB (Type B), optical, coaxial, LINE (3.5mm stereo mini plug) USB connection environment [Mac] OS9.1/OS X10.1 or later [ Windows] XP/Vista/7/8 W149×D149×H33mm 890g
It is a 3-way center speaker tuned to best match the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
Maintained. with cabinet! A power amplifier representing the McKinn Golden Age. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Exterior features include chips and bumps on the cabinet. Serial JCT 4858 (Murakoshi Yoichi)
Maintenance information: 2024.4.3 Maintained (electrolytic capacitors (large capacity capacitors use used products of the same type)), resistors, lamps, etc. have been replaced. Missing screws and rings added. panel paint. Solder correction. Pattern correction. Clean VR and SW connectors. Loosen the screws and tighten them. Bias and offset checks. Output audio check)
Accessories: instruction manual (copy)
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/28 sales price 458,000 yen An integrated SACD/CD player for audio files that focuses on disc media playback. Equipped with a 32-bit/192 kHz DAC chip, it accurately reproduces all the music signals engraved on the disc. In addition to conspicuous scuffs scattered on the exterior and top plate, a feeling of use can be seen, such as partial peeling of the front panel and overall dullness (Kobayashi Hitoshi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: remote control, power cable
Main specifications: Disc format CD, SACD, CD-R/CD-RW (MP3 WMA) analog output RCA, XLR x 1 system each digital output coaxial, 1 optical system each W445 x H152 x D416 mm 12.7 kg
Comes with original box! This is an 8cm full range unit from MarkAudio's ALPair series. It is a self-made unit that is attracting attention because of its technical ability, which has been produced with high accuracy, and has advanced playback capabilities, such as precise and delicate high frequencies. (FUJISAWA KOSHI)
Maintenance information: 2024.5.2 operation confirmed
Accessories: original box
Main Specifications: 8cm full range speaker 4Ω 95-30,000 Hz 85.45dB 10W
The price has been reduced! 2024/5/3 sales price 49,800 yen with box! Current network receiver amplifier compatible with high-resolution sound sources such as network DSD playback. It is compatible with streaming services using HEOS technology recommended by D&M, voice control with Amazon Alexa, etc., and is perfect for ease of use. It is also equipped with a CD player, and can also receive wide FM/AM tuners, which have been a hot topic recently. You can see the appearance, dullness, and feeling of use. Serial BGY36210211253 (Tomoho Asaine)
Maintenance information: 2024.5.3 operation confirmed
Accessories: instruction manual, remote control, power cord, original box
Main specifications: rated output 50W+50W (6Ω) DSD (2.8/5.6MHz) FLAC/WAV/Apple Lossless (192kHz/24bit) 2.4/5GHz dual-band Wi-Fi equipped voice input terminal analog x 1, optical digital x 2 USB-A x 1 W280 x H111 x D303 mm 3.4 kg
Very good product with lots of accessories! Current network receiver amplifier compatible with high-resolution sound sources such as network DSD playback. It is compatible with streaming services using HEOS technology recommended by D&M, voice control with Amazon Alexa, etc., and is perfect for ease of use. It is also equipped with a CD player, and a wide FM/AM tuner can also be received. Serial BGX27230273546 (Murakoshi Yoichi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: remote control, instruction manual, power cord, antenna, original box
Main specifications: rated output 50W+50W (6Ω) DSD (2.8/5.6MHz) FLAC/WAV/Apple Lossless (192kHz/24bit) 2.4/5GHz dual-band Wi-Fi equipped voice input terminal analog x 1, optical digital x 2 USB-A x 1 W280 x H111 x D303 mm 3.4 kg
*Due to its low cost, it is currently sold. The solid design has an outstanding sense of luxury. At Marantz, the traditional gyro tuning dial felt the same as the Model 2600, the highest-end receiver in the past. It's a stunning tuner that combines a modern design with an analog taste. The exterior has dullness and line scratches. Serial MZMZ019842140048 (Yonejima Satoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: No accessories
Main specifications: AM stereo compatible digital synthesizer tuner HDAM configuration audio circuit gyro touch tuning W458 x H86 x D315 mm 6.8 kg
A low price pre-main amplifier that allows you to enjoy Marantz-like sound. How about it as an introduction to audio or as a subsystem, etc. There is a feeling of use such as scratches and dullness
Maintenance information: 2024.4.1 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: W440×H124×D340 mm 7.5 kg
The price has been drastically reduced. 2024/4/16 Sales price 118,000 yen Manufacturer maintained! Marantz pre-main made as an amplifier compatible with super audio. The sound, which makes you feel more relaxed and warm than recent models from the company, which have sharp looks, is attractive. The phono is also MM/MC compatible, so there are no omissions. Dullness, there is a small scratch on the top plate (Sasaki Shota)
Maintenance information: 2024.4.16 manufacturer maintained (SP relay defect replacement, front VR main relay nuclear circuit Iida defect correction implementation, other operation inspections)
Accessories: manual, power cable, remote control
Main specifications: 100W+100W (8Ω) Playback frequency band: 5Hz to 100kHz Analog input: 7 systems Analog output: 2 systems Dimensions W458 x H166 x D464 mm Weight 23.0 kg
※It smells like air freshener, so it's cheap. Marantz pre-main amplifier with excellent cost performance. The sturdy, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are unique to that time (Yasuhito Koshihama)
Maintenance Information: 2020.4.4 Maintained (Confirmation Symptom: The power does not turn on. Action: Power supply board repair correction. Fixed due to soldering deterioration in the main amplifier circuit and other circuit boards. Remote wire switch disassembly contact polishing. Bad output relay contact replacement. (I/O pin jack polish)
Accessories: none
Main specifications: 20W+20W (when grade A) 100W+100W (when AB grade) W454 x H165 x D380 mm 17.5 kg
Vacuum tube graphic equalizer in the ONTOMO MOOK appendix. 5 bands (55, 220, 880, 3.5 k, 14 kHz) can be adjusted by ±8 dB. Comes with an ON/OFF switch for the GEQ function, making it easy to play. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: power cord
Main Specifications: Input Impedance: 500 kΩ Output Impedance: 330 Ω Frequency Characteristics: 20 to 100 kHz S/N Ratio: 100 dB Crosstalk: 80 dB or less W183 x H120 x D88 mm (including knobs and terminals)
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/25 sales price 118,000 yen LINN network player with built-in amplifier. It is equipped with an Ethernet terminal that completes the system simply by connecting a speaker, and supports WAV, FLAC, AIFF, Apple Lossless, AAC, and MP3 playback via LAN. In addition, it is equipped with 1 optical digital and 1 coaxial digital audio input and 1 RCA analog audio input. It can also be connected to devices other than the built-in player and used as a digital premain amplifier. *The volume will be adjusted on the computer. The exterior has a feeling of use such as dullness and small scratches. Serial 1298721 (Hiroki Aso)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: power cable
Main specifications: Compatible audio files: FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequency: 7.35k to 192k Compatible bits: 16 bit, 24 bit Input terminals: Ehernet Analog audio: RCA x 1 (impedance; 10 kΩ) Digital audio: RCA (SPDIF) x 1, TOSLINK (Optical) x 1 SP output: L/R x 1 (compatible with banana, bare wire, Y lug terminals) LINE Output: RCA x 1 SN Ratio: 105 dB Frequency Characteristics: 0 Hz - 30 kHz Output: 70W (4Ω) W191 x H80 x D274 mm Weight 2.65 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The price has been reduced! 2024/4/27 sales price 29,800 yen Krypton speaker stand. It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W249 x H620 x D325 mm top plate W200 x D260 mm weight 7.2 kg/unit
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
KIKUTANI guitar stand Comes with a fall prevention strap. There are some abrasions (Yoichi Murakoshi)
Accessories: none
Main specifications: W510 × H760 (maximum) × D330mm
KIKUTANI guitar stand Comes with a fall prevention strap. There are some abrasions (Yoichi Murakoshi)
Accessories: none
Main specifications: W510 × H760 (maximum) × D330mm
※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
The price has been reduced. 2024/4/29 sales price 110,000 yen The 3 channel 5 units are nicely put together in one package. In addition to the fact that a rich sound field can be simply played back via Bluetooth, etc., it is a product with an emphasis on functionality that can also be enjoyed with analog. Recommended for studio users. Other than the exterior and stains on the top plate, it's fine (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: remote control, power cord
Main specifications: 33mm pure pulp cone woofer x 2, 25mm aluminum dome tweeter x 2, 100mm pure pulp cone center midrange x 1 input HDMI (ARC), 3.5mmAUX, RCA Phono (MM), Ethernet/WiFi Bluetooth playback frequency characteristics 45 Hz to 25 kHz (-6 dB) W790 x H216 x D287 mm 15.9 kg
*9V/2.0A specification. An audio file-standard DC power adapter that uses “active noise cancellation +” using military radar technology (Asaine Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
Main specifications: Approx. 150g (actual measurement)
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/23 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/21 sales price 99,800 yen with casters. This is Hayami's horizontal 5-tier audio rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with KP-4CT casters (set of 2)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2024/4/19 sales price 698,000 yen Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley is 60 Hz, but the strobe platter is for 50 Hz (Murakoshi Yoichi)
Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning. Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test)
Accessories: insulator (audio technica AT616)
Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg
It is a USB-connected bus-powered D/D converter that uses the C-Media “CM6642” as the digital audio control IC and is compatible with high-resolution sound sources (maximum 24 bit/192 kHz) (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, original box
Main specifications: digital input: USB TypeB terminal USB 1.1/2.0 compatible, USBAudioClass 1.0/2.0 compatible digital output: coaxial digital audio output (COAXIAL) optical digital audio input (square) compatible format: PCM maximum 24 bit 192 kHz W40 x H25 x 81 mm 90 g
The price has been reduced! 2024/5/6 sales price 150,000 yen This is a focused overseas model headphone amplifier. Operation has been confirmed in a 100V environment. The neutral sound is simple, uncomplicated, natural, and comfortable to listen to. The interface is also rich and easy to use. Serial 3020886-V1-001308 (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual (English), power cord, original box, headphone stand
Main specifications: 10 Hz to 100 kHz 32 ohm to 1 kΩ 116 dB W200 × H64 × D297 mm 4.65 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm
The price has been reduced. 2024/4/26 sales price 19,800 yen ※There is wobble on one side, so it's cheap. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
Denon's SACD player. It is a standard model equipped with the Advance AL32 Processor, the latest version of Denon's Alpha processing technology, and has generously introduced the latest technology. You can fully enjoy the depth of the sound, and the SN has been further improved compared to the previous model. There are small scratches on the exterior. Serial 3081502128 (Jun Tamai)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: Remote control* instruction manual in preparation, power cable
Main specifications: SACD compatible analog audio output/optical digital output x 1, coaxial digital output x 1 optical digital input x 1 USB (TypeB) x 1 USB (TypeA) x 1 D/A converter compatible sampling frequency 32 to 192 kHz size W434 x H138 x D335 mm weight 13.7 kg