*Currently sold. Although it is small and compact, the sound quality can truly be called a celebration. The sound quality is smooth and warm, so you won't get tired even if you listen to it for a long time. Feel free to enjoy classical music and vocals. The exterior has line marks and dullness. Serial 656558/656560 (Takasaki Atsushi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: saran net
Main specifications: 2-way sealed 2.5cm titanium dome tweeter 15cm woofer impedance 8Ω efficiency 88dB W206 x H350 x D250 mm weight 4.7 kg
Digital cable 1.0 m is a high-performance cable for transmitting high-bandwidth, low-loss digital signals using high-purity silver-plated copper wire as the center conductor of the BNC terminal (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 6N copper conductor, and a luxurious specification using 6N material for the shield. It is a cable with resolution and natural sound quality perfect for high-resolution playback (Yoichi Murakoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 6N copper, 2-core conductor, aluminum shield. It is a cable suitable for vocals with just the right balance between sound loss and mid-range thickness (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable 0.7 m pair 6N copper+OFC hybrid collet chuck plug has no prominent characters, and it is a cable that allows you to enjoy music naturally. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable 1.2m pair 6N copper collet chuck plug with straightforward sound quality that honestly brings out the individuality of a system without dramatization typical of the 6N. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 3-core blade structure, uses high-purity copper. Although it is a model positioned as an introductory grade, you can enjoy the sense of dynamism and stretch of sound typical of Kimber (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
※Inexpensive because it is in poor condition. YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. In addition to the exterior and logo plate being misaligned, there is a lot of feeling of use, such as dullness, conspicuous abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
Maintained! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is dull over time, and there is a lot of feeling of use. Serial MZ02821280143 (Murakoshi Yoichi)
Maintenance information: 2024.6.14 maintenance (tray slide motor belt and CD standby motor belt, C replacement in CD servo)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
Marantz pre-main amplifier. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good. Serial AWY15201102862 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: remote control, power cord
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
Maintained by the manufacturer! Refined model of the PM-17SA. Further refinement has been applied to the highly transparent tone, which is clear and has good visibility. The thin and stylish design and the delicate expressiveness of modern SN are attractive. The subdued power draws more precise and expressive depictions. Serial MZ010248520101 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 manufacturer maintenance (speaker output relay replacement, amplifier board soldering correction, source direct SW disassembly and cleaning, inspection of each part, operation test implementation)
Accessories: remote control, instruction manual, power cable
Main specifications: equipped with pre-out power-in terminals 60W+60W (8Ω) W458 x H110 x D429 mm 16 kg
Maintained by the manufacturer! Accuphase mid-size model equipped with phono (MM/MC). Stable sound quality with high S/N, high resolution and high transparency. Also, just like this age, the bass has elasticity and energy, so you can enjoy it regardless of the music genre. On the exterior, there is a feeling of use such as small scratches and dirt on the front, and dullness of the terminals. Serial E5Y882 (Kanai Hidetsugu)
Maintenance information: 2024.6.13 manufacturer maintenance (main volume, balance volume cleaning, meter, input switch replacement, inspection, adjustment, safety check, pressure resistance check)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: output 100W+100W (8Ω) power consumption 290W 8Ω load rated output 390W phono input 1 system (MM/MC switching) line input 7 systems (balanced x 2 systems, unbalanced x 5 systems) tape system 1 system dimensions W475 x H170 x D418 mm weight 20.2 kg
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 maintenance completed (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
Western Sound Ink boost transformer with Langevin's 408B input transformer casing. It has excellent reproducibility and is suitable for both jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: 198 x 103 x 60 mm 1.1 kg
Fully maintained! The 38 series is the most popular 38FD. It has a warm tone with a warm tone that has a strong warmth in the bass and mids, and you can enjoy the true essence of lackstone where you can enjoy the afterglow of the tone. There is slight rust on the back. There is a slight distortion in the lever. Serial 1611070 (Kanai Hidetsugu)
Maintenance information: 2024.6.11 maintenance (replacement of some parts and vacuum tubes, confirmation of input/output waveforms, load test (1 kHz sine wave, at 8 ohm load: 28 W+28 W, OK), sound output test.)
Accessories: power cord, instruction manual (copy)
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Cotter's most popular MARK2 TYPE L MC boost transformer for low impedance such as orthophones. Using a strong, sealed case and silver wire, the strong and fresh tone is attractive. Perfect compatibility with SPU etc. The transformer itself is different from P/PP/S. RF Enterprise regular import model. ※Silver wire breaks easily, so please handle it carefully (Murakoshi Yoichi)
Main specifications: primary impedance 1 to 6 ohm silver wire triaxial output cable, adopted size W76 x H55 x D150 mm, approx. 1.3 kg
This is a specially designed product in which the company's original neighboring bronze machined pin terminals are set on the HS-1A using African ebony wood, and 6N copper wire with excellent sound quality is used as the shell lead. Since lead wires are soldered to the terminals on the arm side, sound quality improvement effects can also be expected due to a reduction in electrical contacts (Murakoshi Yoichi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: mounting screws
Main specifications: African ebony wood (eco-paint buff finish), brass finger tips (non-magnetic gold plated finish), own weight 10.2 g
※The cantilever is slightly to the right. This is the GE successor to the MC cartridge masterpiece SPU. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to the conventional wild tone. The needle cover is missing, rust floats on the G-shell terminal surface, and there is rust on the cantilever (Murakoshi Yoichi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: none
Main specifications: MC type elliptical needle output voltage 0.2 mV playback frequency band 20 to 20,000 Hz load resistance 10 ohms or more impedance 3 ohms needle pressure 3.0 to 4.5 g dead weight 32 g
※The cantilever is slightly tilted to the right. It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
Thoroughly review the interior and carry out maintenance on capacitors, transistors, etc.! A vintage model representing JBL. In addition to the extremely powerful and well-extruded sound quality, it also has a dry and tight tone unique to this era. The strong sense of energy in the low frequencies and the characters with clear outlines are excellent matches with old JBL speakers. It is a vintage masterpiece that stands out for its individuality. There is a slight feeling of use on the exterior. Serial 2362 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 maintenance (test switch contact defects, other internal checks. DC leak due to leaks such as C in both ch couplings, poor Tr characteristics in the pre-stage, poor characteristics of the power stage Rch transistor x 1 → replacement. (Each VOL rotary SW is large → all cleaning, ~ operation check)
Accessories: instruction manual (copy), power cord
Main specifications: 40W+40W (8Ω) W412 × H128 × D350 mm 11.8 kg
Headphone amplifier for electrostatic ear speakers. Sound quality has been improved and wide range has been achieved, such as an all-stage direct connection A class DC amplifier configuration that does not use coupling capacitors, a custom-made 2-axis quadruple volume, and an XLR input terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: power cable
Main specifications: input XLR, RCA with RCA through out frequency characteristics DC to 90kHz rated input level 100mV/100V output W150 x H100 x D360 mm 3 kg
Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. Serial 830693 (Murakoshi Yoichi)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: original box, needle cover, brush
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box, characteristic table
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
Maintained! Comes with a wood case. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and 7 source input selectors, is also attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.13 maintenance completed (each SW/VOL cleaning, pin jack cleaning, panel peeling correction (characters not allowed), lamp deterioration replacement, push button dismantling and cleaning, resistance burning replacement due to film C short in balance loudness board, .regulator IC defect replacement, operation check ※ balance gap cannot be completely removed)
Accessories: instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Comes with original box! It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
Built-In Phono Equalizer Unit Equipped with a high performance high gain equalizer. The internal dip switch allows switching between MM and MC, and the MC input impedance and subsonic filter can be set to ON and OFF.
Maintenance information: 2024.6.10 Operation confirmed
Accessories: none
Main specifications: Compatible models C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, etc. [MM type cartridge] gain 36 dB, input impedance 47 kΩ [MC type cartridge] gain 62 dB, input impedance 10/30/100 Ω switching E-550 E-350 E-450 C-2110
digital line transformer It has a 1:1.3 times boosting effect, and gives an analog-like thickness, good texture, and a sense of depth. It is recommended for those who want to make the CD sound more analog-like. Please use it by sandwiching it between the amplifier and CD player.
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: W124 x H80 x D170 mm 1.3 kg
Short plug for balanced input terminals. It can be inserted into an empty input terminal such as an amplifier or D/A converter to achieve a noise reduction effect. An item that also reinforces the back plate of the equipment, enhances damping against external vibrations, and greatly improves sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Short plug for balanced input terminals. It can be inserted into an empty input terminal such as an amplifier or D/A converter to achieve a noise reduction effect. An item that also reinforces the back plate of the equipment, enhances damping against external vibrations, and greatly improves sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
1650 series SACD/CD player. It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. In addition to stains on the exterior and front panel, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg
*Ordering decorative plates and power cords is in progress. Accuphase is a popular premain. It is a model that has energy in the mid-range, and also has strength and stickiness. It's sharp, very easy to listen to, and it's nice that it doesn't lose its atmosphere even when the volume is low. Record playback is also possible by adding a phono equalizer option board. There are no visible scratches on the exterior, etc., and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: 170W+170W pre/power separable W475 x H180 x D422 mm 23 kg
Richard Allen's double cone type full range unit. It's a deep, narrow range, and it's a sound that sits on your back. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: none
Main specifications: 8 ohms playback frequency band 45 to 15,000 Hz output sound pressure level 91 dB baffle aperture diameter 178 mm weight 1.8 kg
This is a 150-4H instrument model. It is based on the masterpiece unit 150-4C, and the thick sinking low frequencies and instantaneous power that can be imagined even from thick rims cannot be enjoyed without this woofer. This product is recommended for those looking for an aggressive mid-low range that makes you want to make a loud noise by storing it in a front load enclosure, etc. In addition to discoloration of the exterior and corn paper, mold and dirt on the edges, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: 38 cm ferrite playback frequency band 35 Hz to 2.5 kHz 98 dB impedance 8 ohms rim outer diameter 400 x D157 mm screw pitch 370 mm (diagonal) 13.85 kg
※Inexpensive because there is a lot of dirt and yellowing. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. In addition to the exterior, corrosion, and yellowing, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: Self-made stand
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms (measured 8.9/9.1 ohms), crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/book
DENON analog player. The model is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. It's also a great model for getting started. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: connection cord
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
This is the L-type TH-9708, which is the highest peak step-up transformer along with cotters. The detailed, glossy, and deep sound is the true essence of analog playback. The degree is generally good. Serial 890167 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: primary impedance: LOW 3 ohms size W16.5 x H12 x D10 cm dead weight 2.75 kg
*Set of 2 Acoliba RCA short pins. A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. It is not covered by the warranty even if the sound stops coming out or if it breaks down by any chance (Kobayashi Hitoshi)
Accessories: none
Unspecified set of 4 banana plugs If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Ferrite Core Noise Filters Set of 10 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Ferrite Core Noise Filters Set of 4 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
4560BK type domestic enclosure. The JBL woofer E145-8 was mounted when it arrived. The construction is solid. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch approx. 260 mm, unit mounting aperture diameter approx. 380 mm, measured size W760 x H915 x D608 mm (actual measurement)
Missing due to spikes. Equipped with Reimyo's D/A converter DAP-777 Victor's 20bit/k2processing/IC! It lets you hear beautiful sounds with a beautiful, natural balance. XLR is #3 HOT. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 operation confirmed
Accessories: instruction manual, power cord
Main specifications: sampling rate 32 · 44.1 · 48 kHz input RCA, optical, BNC, AES with phase reversal function W430xH65xD363mm 5.3 kg
※Inexpensive because it is in poor condition. Currently sold. This is a tall boy model of the Reference41MKII. The tuning focuses on the mid-range, so you can enjoy it regardless of genre. You can see a feeling of use on the exterior, holes in the saran net, peeling veneer, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 Operation confirmed
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, 10W to 150W, 20 cm cone type, 10 cm cone type, medium range, 1 cm dome type, W254 x H870 x D307 mm, 16 kg
Full maintenance from internal dismantling and all checks to transistor and capacitor replacement! It's an amplifier similar to the SE400S, but the output has gone up from 40W+40W to 60W+60W, and the sound quality with excellent extrusion and sharpness has revived the sound of the good old days. In addition to the exterior and input terminals being replaced, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (all internal dismantling checks, L/R co-power stage Tr negative side characteristic defect, Lch driver Tr characteristic failure → replacement, in-board bypass C · power supply C broken → replacement, offset VOL contact failure → polishing, check)
Accessories: Power cable (external product)
Main specifications: output bandwidth 3 to 20,000 Hz, 90 dB SNR power supply 100V, 50/60 Hz, power consumption 200W, output 60 W+60 W, W385 x H125 x D93 mm
Maple type. Stand for small speakers made of solid Yonematsu. Compatible with most small speakers. The combination of Corian base and wood block material makes it resonate aggressively and accentuates the sense of spaciousness and depth. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 6 spacers
Main specifications: W280 x H615 x D370 mm 6.6 kg
This is a small bookshelf speaker from the 4th generation “MENUET.” Rosso color type. The glossy, small, yet high-quality sound that is traditional for MENUET is alive and well. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: saran net, instruction manual, original box
Main specifications: 2 way 2 speakers, low range, 115mm, cone type, treble range, 28 mm dome, playback frequency characteristics, 59 Hz to 25 kHz, input sensitivity, 86 dB, impedance, 4 ohms, W150 x H250 x D230 mm, 4.0 kg