Maintained in 2023/5! A 2-way and 3-way channel divider that can be switched in a variety of ways. It is compatible with various crossovers, can be adjusted at a detailed level, and is extremely easy to use. The exterior has a feeling of use such as dullness. Serial 200213 (Tomoho Asaine)
Maintenance information: 2023.5.11 Maintained (power supply fuse replacement, other sound output during confirmation, transistor and capacitor replaced to confirm Chilean noise, current output test after parts replacement)
Accessories: copy of instruction manual
Main specifications: 3-way/2 way Low150/250/400/600/800/1kHz High1.5k/2.5k/3.5k/4.5k/6k/8kHz W200×H149×D316mm 3.8 kg
1.5m digital XLR cable with no liquid leaks, plasma shielding The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. On the exterior, there is dullness on the terminals. Serial 10007514 (Yonejima Satoshi)
Maintenance information: 2024.6.14 Operation confirmed
Accessories: none
RCA line cable 2.0m pair model using plasma (metal compound powder) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
*Model using 1.0 m pair plasma (powder of metallic compounds) shielded with the No. 2 HOT XLR cable. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 303872 (Yonejima Satoshi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
This is a 2.0m pair of XLR cables from Yoshidaen with the idea that you can easily enjoy music with good sound. Please try it (Tamura Eiji)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: case
Maintained by the manufacturer! Luxman CD player with a soft sound. It's easy to hear even when you listen for a long time, and you won't feel tired from listening. It is also recommended to use it in total with L-505s and L-507s of the same age. The exterior is slightly scratched and slightly torn. Serial M90110760B (Fujisawa Yukishi)
Maintenance information: 2024.6.14 manufacturer maintained (replaced due to loading belt deterioration. Tray rail, grease up. Pickup lenses, cleaning. Remote control, internal cleaning, general adjustment.)
Accessories: remote control, power cable
Main specifications: HDCD playback compatible analog output, 1 RCA unbalanced system, 1 XLR balance system, 1 digital output, 1 coaxial system, W467 x H144 x D396 mm, 9.5 kg
Marantz pre-main amplifier. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good. Serial AWY15201102862 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: remote control, power cord
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
Maintained by the manufacturer! Refined model of the PM-17SA. Further refinement has been applied to the highly transparent tone, which is clear and has good visibility. The thin and stylish design and the delicate expressiveness of modern SN are attractive. The subdued power draws more precise and expressive depictions. Serial MZ010248520101 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 manufacturer maintenance (speaker output relay replacement, amplifier board soldering correction, source direct SW disassembly and cleaning, inspection of each part, operation test implementation)
Accessories: remote control, instruction manual, power cable
Main specifications: equipped with pre-out power-in terminals 60W+60W (8Ω) W458 x H110 x D429 mm 16 kg
Maintained in 2023/12! A stereo power amplifier that takes into account ease of use in multi-channel systems, a must-see for multi-channel systems! Contrary to its cute size, it has quite a bit of driving power. The sound is energetic and fresh, just like Sony of this era. There is a feeling of use on the exterior such as line damage or dullness. Serial 205245 (Tomoho Asaine)
Maintenance information: 2023.12.5 maintained (power supply micro SW deterioration replacement, semi-fixed VR replacement for bias adjustment, input RCA terminal L/R poor contact exchange transistors with noise at 2 locations, other DC bias adjustment connection sound confirmation)
Accessories: none
Main specifications: 40W+40W (8Ω) W200×H149×D320 mm 6.5 kg
Sonas Faber's current speaker, Lumina 1, is here! Not to mention the high level of design typical of Italian products, the sound structure and high sense are truly a word. Please try it by reproducing a compact yet rich sound field and a smooth high frequency with a high sense of transparency. The condition is generally good. Serial 2870 2870 (Yamato Yuki)
Maintenance information: 2024.6.14 sweep test good
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, crossover frequency, 2 kHz, frequency characteristics, 65 Hz to 24,000 Hz, output sound pressure level, 84 dB, impedance, 4 ohms, W148 x H280 x D220 mm, weight 4.5 kg/book
Maintained by the manufacturer! Accuphase mid-size model equipped with phono (MM/MC). Stable sound quality with high S/N, high resolution and high transparency. Also, just like this age, the bass has elasticity and energy, so you can enjoy it regardless of the music genre. On the exterior, there is a feeling of use such as small scratches and dirt on the front, and dullness of the terminals. Serial E5Y882 (Kanai Hidetsugu)
Maintenance information: 2024.6.13 manufacturer maintenance (main volume, balance volume cleaning, meter, input switch replacement, inspection, adjustment, safety check, pressure resistance check)
Accessories: remote control, instruction manual, power cable, original box
Main specifications: output 100W+100W (8Ω) power consumption 290W 8Ω load rated output 390W phono input 1 system (MM/MC switching) line input 7 systems (balanced x 2 systems, unbalanced x 5 systems) tape system 1 system dimensions W475 x H170 x D418 mm weight 20.2 kg
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 maintenance completed (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
Western Sound Ink boost transformer with Langevin's 408B input transformer casing. It has excellent reproducibility and is suitable for both jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: 198 x 103 x 60 mm 1.1 kg
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 305572 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10002357, 10002357 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Fully maintained! The 38 series is the most popular 38FD. It has a warm tone with a warm tone that has a strong warmth in the bass and mids, and you can enjoy the true essence of lackstone where you can enjoy the afterglow of the tone. There is slight rust on the back. Serial 1611070 (Kanai Hidetsugu)
Maintenance information: 2024.6.11 maintenance (replacement of some parts and vacuum tubes, confirmation of input/output waveforms, load test (1 kHz sine wave, at 8 ohm load: 28 W+28 W, OK), sound output test.)
Accessories: power cord, instruction manual (copy)
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Choke transformer 5h/250mA DC resistance 67Ω (measured 66.6Ω), outlet wire length approx. 60 mm (measured) W78 x H94 x D74 mm 1.8 kg, dull and dirty (Kojima Yosuke)
Accessories: none
Power transformer Orient core primary: 100V secondary: 2.5-6.3V/3A x 3, 5V/3A, 350-320-290-70-290-320-350V/DC170mA W103 x H94 x D86 mm 3.7 kg (actual measurement, not including protrusions) There are minor injuries and line wounds (Kojima Yosuke)
Accessories: none
Choke transformer inductance 15H/0.1A DC resistance 247.3 Ω (actual measurement 245.9 Ω) W63 × H100 × D50 mm 1.2 kg (actual measurement, not including protrusions) Surfaces other than the terminal side are painted gray, and the name plate part is also painted (Kojima Yosuke)
Accessories: none
Choke transformer inductance 10H/200mA DC resistance 101.3 Ω (actual measurement) W90 × H105 × D90 mm 3.4 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Choke transformer 30h/100mA DC resistance 285Ω (actual measurement) W81 x H102 x D69 mm approx. 2.0 kg (actual measurement, not including protrusions) There are some hook scratches (Kojima Yosuke)
Accessories: none
Since it is a custom-made product sold as an input transformer pair, the specifications are unknown, but they are described by hand. Primary: 600 Ω Secondary: 20 kΩ CT The resistance value has been measured with a tester (1-3:20.7 Ω, 2-4:20.7 Ω, 5-7:198.3 Ω, 6-8:198.8 Ω) W78 x H110 x D66 mm approximately 1.6 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Maintained by Luxman! This model is a return to Luckstone, which is reminiscent of the tube ball era. By changing from pure A grade up until then to grade AB, the sense of extrusion is prioritized, and the corners of the high range are rounded up to give the mid to low frequencies a sense of volume. It has excellent sharpness, and I would recommend this amplifier to almighty music fans. On the exterior, there are dirt scratches, threads, and peeling on the veneer sheet. Serial W90712062H (Tamura Eiji)
Maintenance information: 2024.6.14 Maintained by the manufacturer (power supply part, fuse broken replacement. Install the volume and fix it. Output relay contact fault replacement. Meter lamp replacement. Power supply unit, diode replacement. Replace the amplifier section and semi-fixed volume for adjustment. Board solder correction. volume, switch contact cleaning. Remote control replacement (Internal cleaning, general cleaning)
Accessories: remote control, power cable
Main specifications: 70W+70W W467 x H179 x D440 mm 19 kg
RCA cable 0.75m pair REAN plug Neumann RCA cable familiar from the prestigious German family. Recommended for those who listen to classical music on records. Since it is slender and soft, it is useful in a variety of situations. There is dullness on the plug. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2016 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 100003931 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Digital cable 1.0 m (RCA-BNC terminal) revision B type. A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. On the exterior, oxidation and darkening of the terminals can be seen. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Maintained! A popular preamp sold during the heyday of analog. The mid-range is more glossy and has a sexier vibe than those after C29. That rich sound can truly be said to be a preamp representing the golden age of Mackins'. There are scratches, small scratches, and partial peeling on the exterior. Serial AK1482 (Tamura Eiji)
Maintenance information: Maintained on 2017.7.8 (main volume contact cleaning (slight gang error may occur because parts are not available). Other switches, volume contact cleaning. Amplifier board electrolytic capacitor replacement. Panel lamp replacement. RCA terminal replacement. Correction of areas where panel peeling can be fixed. Check the operation of each input/output)
Accessories: instruction manual (English)
Main specifications: 4 input terminals, 4 PHONO input systems, 2 pre-out systems, W430 x H140 x D365 mm, 13.8 kg
The balance cable is a 1.0m pair XLR female (2nd hot) to XLR male (3rd hot). The silver-plated OFC conductor is bright and clear, and you can enjoy the transparency of a PAD. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
As an ideal interface between mid-class audio components for a 1.0 m pair of RCA cables, it fully demonstrates its performance for any device and provides the enjoyment of music along with warm temperatures. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
1.0 m digital cable, BNC terminal revision B type on both ends A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Cotter's most popular MARK2 TYPE L MC boost transformer for low impedance such as orthophones. Using a strong, sealed case and silver wire, the strong and fresh tone is attractive. Perfect compatibility with SPU etc. The transformer itself is different from P/PP/S. RF Enterprise regular import model. ※Silver wire breaks easily, so please handle it carefully (Murakoshi Yoichi)
Main specifications: primary impedance 1 to 6 ohm silver wire triaxial output cable, adopted size W76 x H55 x D150 mm, approx. 1.3 kg
This is a specially designed product in which the company's original neighboring bronze machined pin terminals are set on the HS-1A using African ebony wood, and 6N copper wire with excellent sound quality is used as the shell lead. Since lead wires are soldered to the terminals on the arm side, sound quality improvement effects can also be expected due to a reduction in electrical contacts (Murakoshi Yoichi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: mounting screws
Main specifications: African ebony wood (eco-paint buff finish), brass finger tips (non-magnetic gold plated finish), own weight 10.2 g
※The cantilever is slightly to the right. This is the GE successor to the MC cartridge masterpiece SPU. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to the conventional wild tone. The needle cover is missing, rust floats on the G-shell terminal surface, and there is rust on the cantilever (Murakoshi Yoichi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: none
Main specifications: MC type elliptical needle output voltage 0.2 mV playback frequency band 20 to 20,000 Hz load resistance 10 ohms or more impedance 3 ohms needle pressure 3.0 to 4.5 g dead weight 32 g
※The cantilever is slightly tilted to the right. It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
Maintained! Comes with a remote control! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is in a state where there are many signs of use, such as dullness and scratches over time. Serial MZ02722110037 (Yamato Yuki)
Maintenance information: 2024.6.13 maintained (tray slide motor belt, CD standby motor belt replacement, bypass C replacement in other servo boards, operation check)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
RCA cable 2.0m pair genuine molded plug, the honest, thick, and powerful sound with medium and low sounds that are unimaginable from the way they look is addictive (Tomoho Asaine)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.2 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Speaker cable is an abnormally thin cable for an unprocessed speaker cable with a 3.5 m pair end. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, so it's fun to drive the sound quality to your own liking (Tomoho Asaine)
Accessories: none
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, so it's fun to drive the sound quality to your own liking (Tomoho Asaine)
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
The stand is made of magnesium alloy, and the bottom plate has a structure made of aluminum and steel plywood. Ultrafine sand is encapsulated inside the pillar and thorough anti-vibration treatment has been applied (Asae Tomo Law)
Accessories: none
Main specifications: top plate W160 x D210 mm bottom plate W220 x D270 mm height 700 mm weight 8.5 kg