A record cleaner that indirectly imparts moisture to the case by adsorbing liquid onto the sponge inside the case. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
※1 XLR cable 1.5m male phone jack plug is made by Neutrick and is originally a microphone cable, so sound removal is good. There is an appearance, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
Main specifications: Electromagnetic shielded microphone cable, 4 cores, outer diameter: 6.0 mm
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
The 1.2m pair of unprocessed speaker cable has excellent balance from low to high frequencies, and has an energetic and warm tone. There are threads and disappearing characters on the exterior (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: No accessories
Pioneer carbon fiber molded headshell. Simple and easy to use design. It is also attractive that it has a slightly lighter weight and is easy to combine. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber molding dead weight 9.5 g
This is a classic jewel tone (made in Nagoya) shell. There is slight dullness and mounting scratches on the body, but overall it is in good condition. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: machined aluminum block with a dead weight of 12g
Set of 4 Use ICP damping spacers and IDS composites together as tuning goods to counteract speaker vibrations. *Cannot be used as a receiver for metal spikes. There are scratches and threads on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: diameter 35 mm x 3 mm (thickness)
Set of 4 It simultaneously reduces vibration and impact noise, improves overall resolution, and is particularly excellent at improving low frequency resolution, and has the effect of tightening soft low frequencies. There are threads and dirt. (FUJISAWA KOSHI)
Accessories: none
Main specifications: recommended load mass 10 to 80 kg (4 point fulcrum) usage environment 0 to 40 ℃ size 55 mm x 55 mm
Set of 4 It simultaneously reduces vibration and impact noise, improves overall resolution, and is particularly excellent at improving low frequency resolution, and has the effect of tightening soft low frequencies. There are threads and dirt. (FUJISAWA KOSHI)
Accessories: none
Main specifications: recommended load mass 10 to 80 kg (4 point fulcrum) usage environment 0 to 40 ℃ size 55 mm x 55 mm
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Jack (female) to RCA cable 2.0m pair plug are both ends made by Neutrick and are originally microphone cables, so sound loss is good. There is an appearance, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.9.16 Conductivity Confirmed
Accessories: none
Main specifications: Electromagnetic shielded microphone cable, 4 cores, outer diameter: 6.0 mm
Jack (male) to XLR (male) cable 2.0m pair plugs are both ends made by Neutrick and are originally microphone cables, so sound loss is good. There is an appearance, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.9.18 Conductivity Confirmed
Accessories: none
Main specifications: Electromagnetic shielded microphone cable, 4 cores, outer diameter: 6.0 mm
It is a grace shell characterized by a fin shape. Lightweight yet hard, highly rigid shell (Asaine Tomoho)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber dead weight 10.7g
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki)
Maintenance information: 2024.6.8 confirmed
Accessories: none
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
※Only 1 bottle is currently sold because it is cheap. Bookshelf speakers made in England. It features compact, tight low frequencies and stretchy mid-high frequencies. There are scratches, threads, and the smell of oil (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: 89dB 6Ω W210 × H380 × D220 mm 5.4 kg
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustment are possible (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 10g
*Lead wire missing. An NR (Non Resonance) head shell with the shell body and plug part integrally molded. It has a structure where the main body is tightened from the top and bottom with a finger plate and cartridge, there is no need for a stop nut, and it comes with an overhang adjustment memory, making it easy to set up. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 10 g (actual measurement)
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
Comes with original box! DP-1300M heavy headshell counterweights, set of 2 large and small A must-have item for those using heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. It is recommended for those who use a variety of cartridges. There are some scratches on the exterior (Fujisawa Yukishi)
Accessories: original box
Main specifications: Compatible cartridge weight/for 20 to 28 g (small) /26 to 37 g (large)
DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: No accessories
Main specifications: aluminum alloy with a dead weight of about 8 g
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The price has been reduced. 2024/2/24 sales price 6,000 yen ※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep test good
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: No accessories
Main specifications: dead weight approx. 13g
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
The price has been reduced. 2023/11/15 Sales price 8,000 yen Center speaker stand from unknown manufacturer. It is a type that is easy to handle with wooden casters. There are threads on the exterior. (Miura Kimiya)
Accessories: No accessories
Key Specifications: W570 ✕ H225 ✕ D440mm 4kg
This is a specially designed product in which the company's original neighboring bronze machined pin terminals are set on the HS-1A using African ebony wood, and 6N copper wire with excellent sound quality is used as the shell lead. Since lead wires are soldered to the terminals on the arm side, sound quality improvement effects can also be expected due to a reduction in electrical contacts (Murakoshi Yoichi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: mounting screws
Main specifications: African ebony wood (eco-paint buff finish), brass finger tips (non-magnetic gold plated finish), own weight 10.2 g
※Since it is cheap, it will be handed over as is. Comes with a remote control. AM/FM stereo tuner with dual-gate MOS FET on the front end. The tone is bright and natural. There are dirt scratches and threads on the exterior. Serial MZ009520050055 (Tamura Eiji)
Maintenance information: 2024.6.5 operation confirmed
Accessories: remote control, instruction manual, AM antenna
Main specifications: AM/FM stereo synthesizer tuner dimensions W428 x H86 x D295 mm weight 3.2 kg
*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has scratches, threads, and dullness. There is also a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
FR heavyweight headshell In combination with a heavy needle and pressure needle, it exhibits excellent tracing performance, such as digging up from deep inside a groove on a record board (Sasaki Shota)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: none
Main specifications: aluminum press processing actual measurement 19g
FR heavyweight headshell In combination with a heavy needle and pressure needle, it exhibits excellent tracing performance, such as digging up from deep inside a groove on a record board (Sasaki Shota)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: none
Main specifications: aluminum press processing actual measurement 19g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: mounting screws
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
YAMAHA speaker stand The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit
※Since it is cheap, it will be handed over as is. The design is reminiscent of the Technics SL-1200 series, but I recommend this model for those who want to enjoy functionality and a little bit of fun on their own. It can be used by a wide range of people, from beginners to DJs. The exterior is dull and there are small scratches on the dust cover. Serial C410000041 (Kimiya Yonejima)
Maintenance information: 2024.6.5 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: quartz lock brushless servo motor, rotation speed 33, 45, 78 rpm, arm weight 12 g to 17 g (including headshell) size W450 x H157 x D352 mm weight 11.3 kg
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
* There is no remote control, and there is no problem with the current operation, but since it is inexpensive, it is a CD player equipped with a K2 interface circuit, has plenty of functions, and is also attractive in terms of ease of use. It eliminates digital distortion caused by jitter (time difference distortion), ripple (waveform distortion), etc. There are threads and small scratches on the exterior, and deterioration can be seen on the inside of the tray (Kojima Yosuke)
Accessories: copy of the manual
Main specifications: W435 x H115 x D375 mm 9.3 kg
※The earpads are not in good condition, so they are cheap. These open-air headphones feature well-balanced, natural sound from high to low frequencies. Try a slightly different sound from low impedance headphones. ※The cable has been replaced. On the exterior, there are dirt and cable marks on the earpads and head pads (Satoshi Yonejima)
Maintenance information: 2021.11.12 sweep test good
Accessories: original box
Main specifications: dynamic open air headphones, 300 ohms, 97 dB, 12 to 40,500 Hz, plug shape, 4.4 mm