Maintained! A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. The exterior has scratches and line scratches. Serial 2436 (Fujisawa Yukishi)
Maintenance information: 2023.10.8 Maintained (20 capacitors and 6 resistors replaced. Solder partially corrected. Other inspections and adjustments. The input terminals have been replaced with RCA)
Accessories: power cable, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
Set of 4 It simultaneously reduces vibration and impact noise, improves overall resolution, and is particularly excellent at improving low frequency resolution, and has the effect of tightening soft low frequencies. There are threads and dirt. (FUJISAWA KOSHI)
Accessories: none
Main specifications: recommended load mass 10 to 80 kg (4 point fulcrum) usage environment 0 to 40 ℃ size 55 mm x 55 mm
Set of 4 It simultaneously reduces vibration and impact noise, improves overall resolution, and is particularly excellent at improving low frequency resolution, and has the effect of tightening soft low frequencies. There are threads and dirt. (FUJISAWA KOSHI)
Accessories: none
Main specifications: recommended load mass 10 to 80 kg (4 point fulcrum) usage environment 0 to 40 ℃ size 55 mm x 55 mm
*Lead wire is missing. An NR (Non Resonance) head shell with the shell body and plug part integrally molded. It has a structure where the main body is tightened from the top and bottom with a finger plate and cartridge, there is no need for a stop nut, and it comes with an overhang adjustment memory, making it easy to set up. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 10 g (actual measurement)
Includes horseshoe ring A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. On the outside, oxidation can be seen on the horn part. Serial 104837 104761 (Tomonori Asae)
Maintenance information: 2023.12.24 sound output confirmed
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms (measured 14/14 ohms), crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/book
Case included. Y-lug exclusive banana plug set of 4 has a monocoque structure, so there is no deterioration in sound quality inside the plug. The entire body from the tip to the cable clamp is pink gold plated, so each contact part does not deteriorate even during long-term use (Oikawa Tetsuji)
Accessories: case
Main specifications: Compatible with Y-lugs of approx. 6 mm to approx. 8 mm
Genuine Harman Mark Levinson's masterpiece amplifier. The large diameter unit is moved lightly with an order of magnitude of driving force. The tight, deep low-range texture is wonderful, and it clearly depicts slight differences in pitch and differences in the timbre and nuance of the instrument. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.6.10 Operation confirmed
2023.4.13 Maintained (replacement of deteriorated parts such as capacitors, resistors, etc., part of the board was corroded due to condenser fluid leakage, and was cleaned and repaired.
Other inspections and adjustments have been made)
Accessories: power cord (non-genuine), copy of instruction manual, remo pin, short pin
Main specifications: Dual monaural configuration, stereo amplifier, rated output 200W+200W (8Ω), frequency characteristics, 4 to 140000 Hz, SNR, 104 dB, input impedance, 50 kΩ, dimensions W483 x H210 x D450 mm, weight 40 kg
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.10 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
*The stylus is a SHURE VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Maintained! This time, not only does it have 1 S-shaped one, but it also comes with 2 straight pipes! EXCLUSIVE's super popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. There are small scratches, but it is a good category even when viewed from the model year (Oikawa Tetsuji)
Maintenance Information: 2024.6.9 Maintained (Replaced due to semi-fixed volume disconnection. The transistor was replaced due to rotational instability. The electrolytic capacitor has been replaced. The arm bearing was cleaned, operated, and audio-checked. Each rotation lock has been adjusted and the voltage has been adjusted. (Silicone grease attached)
Accessories: transport screws, subweights, 2 straight pipes, silicone oil
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
Maintained! Comes with original box. Levinson's long-selling prime amplifier. A dual monaural configuration that is thoroughly packed into one chassis while keeping the design concept of separation intact. You can be satisfied with all music genres with quality that easily surpasses separate amplifiers. You can see a feeling of use such as exterior, dullness, abrasions, scratches, etc. (Sasaki Shota.)
Maintenance information: 2024.3.3 Maintained (replace deteriorated parts. DC voltage/DC offset voltage/idling current/other inspection adjustments)
Accessories: original box, remote control, manual, power cable (non-genuine)
Main specifications: 100W+100W (8Ω) XLR input x 2 system RCA input x 3 system gain adjustable (preamp section 0/6/12 dB) W445 x H162 x D483 mm 29.5 kg
Maintained! Comes with a remote control. A CD player developed to commemorate the 100th anniversary of Philips's founding. The sound is soft and relaxed, and the thickness of the analog-like mid-low range is particularly irresistible. A swing-arm CDM-4 mechanism is used for the mechanism part, and TDA1547 (DAC7) is used for the D/A conversion part to achieve advanced S/N improvements. As for the exterior, there are bald spots and stains on the SW area. MZ019204080075 (Tamura Eiji)
Maintenance information: 2024.6.9 Maintained (both tray slide belt and CD standby motor belt replaced. Other CD mechanisms, drive circuit check, reading check OK, remote control check OK)
Accessories: remote control, lock pin
Main specifications: CDM-4 mechanical DAC7 equipped analog output 2 systems (XLR/RCA) 2 digital output systems (optical/coaxial) W457 x H140 x D359 mm 16.7 kg
2023 Maintained! One of the best masterpieces of pre-main amplifiers in SANSUI history. It's powerful, with a sense of extrusion, and makes you hear a stretchy and expansive sound. The deep sinking low frequencies and the good tone unique to MOS are some of the best finished premains in SANSUI history. As for the exterior, there are scuffs and line scratches on the top plate. Serial 606068517 (Yonejima Satoshi)
Maintenance information: 2023.6.23 maintained (power supply circuit part rectifier diode replacement, transistor, resistor exchange, indicator lamp replacement, protector part transistor replacement, output relay, headphone relay replacement, power amplifier part solder repair, rec selector, power amplifier direct switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, SP terminal correction, adjustment, operation confirmation. (*There is some hardness on the SP terminal)
Accessories: instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W450 × H176 × D486mm 32.1 kg
Special equalizer for photoelectric cartridges. Since there is no resistance to the movement of the vibration system, more delicate playback sound can be expected than conventional cartridges. Since it is a special circuit that supplies power to LEDs, it can only be used with a dedicated equalizer. Cut off the front corner. There is a scratch on the lower part of the rear (Daiki Goto)
Maintenance information: 2024.6.8 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W325 x H96 x D21 mm 5.5 kg
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki)
Maintenance information: 2024.6.8 confirmed
Accessories: none
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. It is a beautiful item with little feeling of use (Mizusaki Ryo)
Maintenance information: 2024.6.8 sound output confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
The price has been reduced! 2024/6/8 sales price 298,000 yen Maintained! A player equipped with a genuine SME 3010R black model for the 100th anniversary Centennial. This is a famous machine that perfectly matches the high sense of resolution unique to SMEs and the individuality of the supple TD126. The quietness of the floating suspension and belt drive and the analog sound with a low center of gravity are excellent words. The relatively compact housing, ease of use, and good balance in terms of sound quality are also attractive. The exterior has dullness and scratches. Serial 66529 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (replaced due to poor contact with the display lamp. Servo circuit electrolytic capacitor replacement. Cleaning between armweights and shafts. Clean the arm clamp area. Loosen and re-tighten the upper arm screws. Strobe mirror cleaning. Elevation belt and turntable belt replacement The PU cord ground wire has been repaired. (Arm operation, voice check OK)
Accessories: instruction manual, phono cable
Main specifications: belt drive, 33/45/78 rotation compatible, W505 x H170 x D395 mm, 14 kg, arm part: static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), adjustable needle pressure range 0 to 5 g
The price has been reduced! 2024/6/8 sales price 598,000 yen Maintained by Yukim! A special version of Delphi Mark 5, which was planned to commemorate the 15th anniversary of Oracle's founding, debuted at Hi-Fi Hall! A belt drive record player with an SME SERIES V mounted on the arm. In addition to the thickness of the belt drive, SERIES V cuts and high freshness are added, making you feel an overwhelming amount of information. The exterior has marble scratches and dullness. Also, the 33/45 display lamp is displayed as if it were slightly missing, but this is the current state. Serial 10351 (Yonejima Satoshi)
Maintenance information: 2024.6.8 Maintained (parts replacement (various suspension dampers, suspension pillars, suspension caps), suspension adjustments, operation confirmation, LED lamp replacement. (Arm mechanism partial dismantling and cleaning)
Accessories: power supply unit, connection cable
Main specifications: belt drive record player 33/45 arm part: tapered magnesium arm, dynamic balance type, effective length 233.2 mm, needle pressure range 0 to 3 g, overall part: W483 x H165 x D368 mm weight 26.9 kg
The price has been drastically reduced. 2024/6/8 sales price 198,000 yen A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals. The exterior, the SP terminal metal part is dull, and small scratches are scattered on the spikes, and a feeling of use such as dullness and abrasions can be seen throughout (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: saran net, spikes, cloth cover
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 35Hz-20kHz impedance 4Ω output sound pressure level 90dB W237 x H1080 x D310 mm 25 kg
※The vertical stand is missing, and there are many small scratches, so it is cheap, and it is currently sold. Stand is missing. The company's first standalone USB-DAC and headphone amplifier that is also compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. In addition to the exterior and tape marks, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: AC adapter
Main specifications: DSD signal sampling frequency 2.8224, 5.6448 MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
Maintained! An eye-catching Lax pre-main amplifier with a unique indicator. It is a traditional lackstone, and the soft and warm mid-low range like a vacuum tube is attractive. The speakers, which have a solid sound quality, also play softly. There is a slight gap between the exterior and the BASS dial scale, and a feeling of use can be seen, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.4 maintenance completed (14 deteriorated parts in each circuit replaced, switch and volume contacts corrected, input/output pin jack polished)
Accessories: none
Main specifications: 40W+40W (8Ω) W443 × H153 × D273 mm 9.3 kg
Manufacturer maintained, including traverse mechanism replacement! A long-selling model equipped with a USB-A terminal. Compared to other models in the same class, it is popular for its slightly thicker sound that is pleasant to listen to. Music files can be played directly by connecting to an iPod/iPhone, WMA, MP3, or USB memory with recorded files. There is slight dullness and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.5 manufacturer maintenance (loading motor, loading belt, traverse mechanism replacement. (Inspection of each part, operation, sound test)
Accessories: remote control
Main specifications: audio output terminal/RCA x 1, headphone x 1, digital output/light x 1 W434 x H107 x D273 mm 4.1 kg
The price has been reduced. 2024/6/8 sales price 128,000 yen Sun Valley 6550 push pull The design imitates Macintosh amplifiers of yesteryear. The sound design is bright, energetic, and supple, and has excellent sharpness that is more responsive than a normal transistor amplifier. There is dullness, dirt, small scratches, and dullness on the metal part of the power cord (Murakoshi Yoichi)
Maintenance information: 2024.6.7 sound output confirmed
Accessories: power cord
Main specifications: 6550 push-pull rated output 40W+40W using vacuum tube 6550, EL84 x 4 (SOVTEK), 12AX7EH x 2 (electro-harmonix) 4Ω/8Ω compatible W430 x D270 x H200 mm 18 kg
*Currently sold. A speaker that can be easily used for multiple purposes, such as for subsystems and AV. It has a gentle and elegant European taste that is more textured than the price. The exterior has a feeling of use such as dullness, small scratches, and partial tears in the saran net. Serial 4067104884 4067104884 (Asaine Tomoho)
Maintenance information: 2024.6.8 sound output confirmed
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex bookshelf type output sound pressure level 89dB impedance 6Ω dimensions W190 x H322 x D256 mm weight 5.2 kg
A new standard model for the SL-1200 series, inheriting the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There are small scratches and threads on both the body and dust cover on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.7 operation confirmed
Accessories: instruction manual, power cord, RCA cable, earth cable, original box, subway, shell
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
DS-E1 is the entry model for optical cartridges. The mechanism captures the movement of the needle as a change in light and outputs it, and reproduces sound quality with excellent separation and high resolution. The exterior is slightly dull on the body*A dedicated equalizer is essential for use (Ryo Mizusaki)
Maintenance information: 2024.6.7 operation confirmed
Accessories: original box, catalog, wrench
Main specifications: DS-E1: aluminum cantilever, machined aluminum body, output voltage of 500 mV or more, needle pressure 1.6 g to 1.8 g, weight 8.1 g
※The root of the needle is damaged, so it's cheap! A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Asaine Tomoho)
Maintenance information: 2024.6.7 sound output confirmed
Accessories: needle cover
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. The exterior has scratches on the side, and there is a feeling of use such as a line scratch on the top plate (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
※It is inexpensive because there are many scratches. TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. The exterior has scratches on the side, and there is a feeling of use such as a line scratch on the top plate (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
Pair tube earthquake-resistant military standard product special tube getter large triode tube with white box, measured IP value: 47/47 mA (the best standard IP value for this amplifier is 50 mA) *Sound is checked with a test amplifier, plate current values have been measured, and it has been determined that operation is good (Kojima Yosuke)
Accessories: white box
Maintained in 2017/7. Accuphase FM dedicated tuner. As a synthesizer tuner, it has satisfactory sound quality far surpassing tuners in the same price range. Not only does it have clear sound quality, but it also has a strong mid-range tone, and it is a high quality model that achieves both good sound quality and good reception performance. There are scratches, scratches, etc. on the exterior. Serial C9W680 (Takasaki Atsushi)
Maintenance information: 2021.7.15 maintained (glass exterior fog cleaning, FL tube fog stain cleaning, MPX separation characteristics readjusted, MUT level readjusted, meter display reset, and other adjustments are not possible)
Accessories: manual
Main specifications: FM dedicated tuner, quartz synthesizer system, 12 stations, random memory tuning, W465 x H135 x D340 mm, 6.0 kg
The price has been drastically reduced! 2024/6/7 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
The price has been drastically reduced. 2024/6/7 sales price 268,000 yen ※It is cheap because it has scratches. Genuine Oba Shoji product. The uncompromising construction is excellent, with an aircraft-grade machined aluminum block chassis. I am amazed at its compactness and beauty. I'm only particular about the expressive power of the silent part, and the way the faint sound disappears is as clear as if you take your breath away. It's true that it makes me lament the warmth of human skin. There are scratches on the front and back of the top plate on the exterior (Ryo Mizusaki)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control, instruction manual, power cord
Main Specifications: Input Terminal Unbalance (RCA) 2 Systems/Balance (XLR) 2 Systems/Bypass, Unbalanced (RCA) 1 System Output Terminal Unbalance (RCA) 1 System/Balance (XLR) 1 System Input Impedance/Unbalance 48kΩ/Balance 48kΩ Dimensions W348 x H75xD191 mm (maximum dimensions) Weight 4.2 kg
Maintenance such as mechanical ASSY replacement has been completed at Denon! A SACD player with a full aluminum chassis and aluminum tray. Similar to the regular series, the D/A section is also equipped with AL24 processing. The supple sound is pleasant enough to listen to. He's an authentic player who doesn't make you feel the size (Daiki Goto)
Maintenance information: 2024.6.6 Maintained (loading mechanism part, traverse mechanism replaced. Each part was inspected and operation tested.)
Accessories: remote control, instruction manual, power cable
Main specifications: SACD/CD player MP3/WMA file CD playable 1-bit DSD/16-bit linear PCM line output 1 system (RCA), 2 digital output systems (coaxial x 1, optical x 1) W300 x H80 x D310 mm 7 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
SAEC ceramic shell A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. There is a cloudy part (Daiki Goto)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
*Currently sold, this is a limited edition model commemorating the 15th anniversary of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. The exterior is dull and dirty. The bottom has been replaced with felt from rubber feet (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. There are dirt and stain marks on the exterior (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
MC boost transformer loaded with transformers developed in collaboration with Tamura, for high impedance. Adopts a completely independent structure for the left and right, including the earth system. It matches Denon's DL-103, etc. The exterior has minor paint peeling and bumps. Serial 298 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 10 times W174 x H125 x D121 mm 2.5 kg
It was maintained in 2019. A special edition of the PM-80. A popular Marantz model from the 90s that has both luster and strength. This is a geeky model where you can enjoy the difference in tone by switching between A grade and AB grade. There is a feeling of use, dullness, and small scratches. Serial MZ009046030013 (Murakoshi Yoichi)
Maintenance information: 2019.7.11 maintenance completed (speaker relay replacement, source/TAPE switch push button SW6 wear replacement, other MM/MC switching SW/INPUT selector switch SW disassembly contact polishing cleaning, idling CLASS A · B confirmation adjustment, confirmation of solder cracks on each board, partial repair, confirmation of sound output for each input/output connection)
Accessories: instruction manual (copy)
Main specifications: AB class 100W+100W (8Ω) A grade 20W+20W (8Ω) size W454 x H165 x D380 mm weight 17.5 kg
The price has been drastically reduced. 2024/6/6 sales price 148,000 yen Manufacturer maintained! Accuphase CD player. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. There are many line marks, other small scratches, and a feeling of use on the top surface. Serial D0Y305 (Murakoshi Yoichi)
Maintenance information: 2024.6.4 manufacturer maintenance (tray opening/closing belt set and buffer spacer, operation switch, phase and capacitor replacement. Disassembly and cleaning of the loading mechanism. Operation, characteristic tests, aging tests, readjustment of parts, interior and exterior cleaning, insulation, and safety tests)
Accessories: remote control, instruction manual (copy)
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
Maintained by the manufacturer! This mono power amplifier was developed as the first full-scale high-output power amplifier for consumer use. The sound quality is unique to Accuphase, which has high power and is full of subtlety. Equipped with a digital meter that instantaneously calculates real power. By switching between modes, it is easy to drive even ultra-low impedance speakers. There is a feeling of wear on the exterior such as scratches. E1X029 E1X030 (Jun Tamai)
Maintenance information: 2024.6.6 Accuphase maintained (relay contacts replaced due to deterioration, all switches, volume, reworked due to contact cleaning, parts replaced due to stress deterioration, safety confirmation, pressure resistance test, operation characteristics check, each readjusted cleaning pair, similar treatment for matching characteristics)
Accessories: original box
Main specifications: 800W+800W (8Ω) W481 x H239 x D489 mm 47.2 kg
The price has been reduced! 2024/6/6 sales price 99,800 yen with box! A pre-main amplifier with clear sound without unnecessary dramatization. You can enjoy the company's unique tone, which is clear yet powerful and sharp. Both the exterior has a modern and smart impression. You can use it regardless of genre. There is a small scratch on the top plate on the exterior. Serial 130140015 (Jun Tamai)
Maintenance information: 2024.6.6 sound released and confirmed
Accessories: original box manual, remote control, power cable, spike
Main specifications: 75W+75W (8Ω) 115W+115W (4Ω) W420 × H88 × D214 mm 7.0 kg
Full maintenance was carried out to replace all deteriorated parts such as capacitors and vacuum tubes! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. The exterior has a beautiful finish due to exterior maintenance, but rust etc. on the back remain. Serial 101 20007 (Tomoho Asaine)
Maintenance information: 2024.6.6 maintained (parts replacement, input/output waveform check, load test (1kHz sine wave, 8Ω load: 30W+30W, OK), sound output test) 2020.4.2 maintained (vacuum tube (50CA10), electrolytic capacitor, block electrolytic capacitor, coupling capacitor, vacuum tube socket, headphone jack, micro switch, rectifier diode, semi-fixed resistor, fuse replacement. Complete disassembly of SW/VOL contacts, polish, and apply grease to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 30W+30W), distortion adjustment (maximum output: 0.2%), sound output test)
Accessories: manual copy power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Maintained, with remote control! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. There are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.4 Maintained (Electrolytic capacitors were replaced due to faulty capacitors in the power supply unit and motor unit)
Accessories: power supply unit, remote control, copy of instruction manual
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
Maintained! An FM masterpiece arm made in Japan made with a high level of stainless steel and workmanship accuracy. The clear, thick tone that doesn't make you feel incidental sounds is excellent, and the breadth and ease of settings, and the excellent firm and excellent tracing ability in the dynamic balance type are excellent (Oikawa Tetsuji)
Maintenance information: 2024.6.5 Maintained (We will disassemble the arm needle pressure application mechanism part and clean it. The arm lifter skate rubber was replaced due to deterioration. Operation tests with cartridge mounting were also good)
Accessories: phono cable, instruction manual
Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm
※Since it is cheap, it will be handed over as is. The design is reminiscent of the Technics SL-1200 series, but I recommend this model for those who want to enjoy functionality and a little bit of fun on their own. It can be used by a wide range of people, from beginners to DJs. The exterior is dull and there are small scratches on the dust cover. Serial C410000041 (Kimiya Yonejima)
Maintenance information: 2024.6.5 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: quartz lock brushless servo motor, rotation speed 33, 45, 78 rpm, arm weight 12 g to 17 g (including headshell) size W450 x H157 x D352 mm weight 11.3 kg
*Although it is a 60 Hz specification, the strobe on the platter is 50 Hz. Maintained! It is a setup that successfully combines the stickiness and guts of the classic Grace arm 545 with few quirks, and the delicate expression with fine grain. It's a car that can be enjoyed regardless of genre. The exterior and flash are not compatible with 50 Hz specifications, and a feeling of use can be seen on the back, such as screw holes, dullness, abrasions, scratches, etc. that seem to be numerous hinge installation marks. Cereal 69774 (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 maintenance completed (motor disassembly/check/lubrication/assembly, motor suspension rubber replacement, suppressor → rebuild replacement, main bearing disassembly/oil filling, oil sealant application, assembly, pulley adjustment, idler cleaning, TT mat replacement, mount rubber washer added, running test OK)
Accessories: sub weight, black weight
Main specifications: GRACE G-545: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) needle pressure variable range 0 to 5 g GARRARD 301: idler drive compatible with 33, 45, 78 rotations W500 x H210 x D403 mm