The price has been reduced. 2024/6/16 sales price 298,000 yen The sound is enveloping, and there is sex appeal in the glossy mid-high range. It also excels at reproducing acoustic instruments, so you can enjoy vivid playback sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: saran net, spikes, original box
Main specifications: rear bass reflex type frequency characteristics 28 Hz-22 kHz 91 dB 4 Ω crossover 110 Hz, 2,500 Hz W190 x H1085 x D400 mm 32.5 kg
※Inexpensive because it has a cigarette smell and dirt. Comes with a self-made stand. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is corroded and dull, and although it has been cleaned, tobacco smell and dirt cannot be removed (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: self-made stand
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
192 kHz 24 bit D/A converter. The sound image has a clear tone, and it is a high performance model that can also be used as a headphone amplifier. There is a dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: power cable only
Main specifications: 2 channel 24-bit 192 kHz compatible D/A conversion input 3 systems (coaxial, XLR, optical) W205 ✕ H45 ✕ D240mm 1.6 kg
The high-quality textured design of KOJO TECHNOLOGY's “Virtual Earth” top cover with a satin white anodized finish is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in surface area, partial material changes, and S/N improvements, but also improvements in fineness (Sasaki Shota)
Accessories: original box, manual, connection cable
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
Maintained by the manufacturer! Luxman CD player with a soft sound. It's easy to hear even when you listen for a long time, and you won't feel tired from listening. It is also recommended to use it in total with L-505s and L-507s of the same age. The exterior is slightly scratched and slightly torn. Serial M90110760B (Fujisawa Yukishi)
Maintenance information: 2024.6.14 manufacturer maintained (replaced due to loading belt deterioration. Tray rail, grease up. Pickup lenses, cleaning. remote control, internal cleaning, general adjustment)
Accessories: remote control, power cable
Main specifications: HDCD playback compatible analog output, 1 RCA unbalanced system, 1 XLR balance system, 1 digital output, 1 coaxial system, W467 x H144 x D396 mm, 9.5 kg
The dust cover is missing. ROTEL record player. It is also recommended for those starting out with semi-automatic audio. Also, the design that blew through is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 maintenance (belt replacement, arm operation, voice check)
Accessories: cartridge
Main specifications: W436 x H130 x D350 mm 4.8 kg (actual measurement)
The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
Manufacturer maintained, including pickup replacement! A CD player with a simple design, good cost performance, and easy for beginners. It is equipped with 10 keys that are convenient for station selection. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.13 manufacturer maintenance (loading belt/tray opening/closing SW exchange, laser pickup replacement, inspection of other parts, sound test)
Accessories: none ※remote control missing
Main specifications: 2 analog outputs (variable, fixed), 2 digital outputs (OPTICAL, COAXIAL) W433 x H115 x D288 mm 6.3 kg
It inherits the power supply technology that achieves high speed responsiveness and high signal-to-noise ratio developed with the Technics premium Primain SU-R1000. It's a tuning that you can listen to with peace of mind regardless of genre with responsive low frequency playback with strong speaker driving power. There is also a PHONO input compatible with MM/MC cartridges, and the fact that it is compatible with various sound sources and peripherals from analog to digital is attractive because it has excellent cost performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) phono MM/ MC compatible PC input: back USB B type connector x 1 digital input: optical square terminal x 2, coaxial digital input W430 x H148 x D428 mm 12.7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 298,000 yen A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
Genuine Electri While being clear and precise, this is a powerful machine that also has the thickness and intensity of sound of successive Macintosh control amplifiers. It is a famous machine with a deep sense of nostalgia that is compatible with both vintage and modern models. Using the familiar 5-band equalizer, it is also possible to change the desired tone depending on the song. The exterior has blows, line scratches, and repair marks. Serial JHD3514 (Fujisawa Yukishi)
Maintenance information: 2018.8.30 Maintained (main volume, balance volume, etc. Contact cleaning. Switch contact cleaning. Head amplifier section and EQ volume circuit capacitor replacement. Power cord replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: built-in monitor amplifier with 5-band equalizer (20W x 2/8Ω), compatible with balanced input/output, PHONO (MM) compatible, W468 x H183 x D432 mm, 12 kg
The price has been drastically reduced! 2024/6/5 sales price 328,000 yen Maintained! Macintosh's first power amplifier with a balanced circuit configuration. Resolution and transparency have been added to the traditional rich, extruded tone. The blue meter, which can be said to be synonymous, is alive and well, and has plenty of presence, pleasing not only the ears but also the eyes. The exterior is dull and has small scratches. Serial JGC1730 (Yonejima Satoshi)
Maintenance information: 2024.6.5 Maintained (volume exchange (both channels) due to left channel volume shaft bending and poor contact points) lamp, electrolytic capacitor, etc. due to deterioration, acrylic removal cleaning, solder correction, connector cleaning, panel peeling correction (character area, etc. are not allowed) switch cleaning. Bias and offset check output audio check)
Accessories: copy of instruction manual
Main specifications: 300W+300W (2/4/8Ω), 600W during MONO (2/4/8Ω) W445 x H196 x D420 mm 35 kg
The deteriorated capacitors have been replaced with DAYTON film capacitors! The grain of the sound is clear and the smoothness of the connection has also been improved. crossover 1200 Hz. This network is ideal for the combination of a 38cm woofer and a 1-inch driver. The exterior has stains, paint peeling, etc. (Wang Zhan)
Maintenance information: 2015.10.22 Maintained (terminal polishing, cleaning, insulation bush, mounting screw replacement. ATT cleaning. Exterior cleaning. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check. (*2013.1.28 capacitors have been replaced)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control 1.8 kg
※The manufacturer logo on the front is missing, so it's cheap. Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. There are scratches, bumps, dirt marks, etc. on the exterior. Serial 613082601 (Tamura Eiji)
Maintenance information: 2024.6.13 maintained (input selector, etc., switch dismantling and polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor), output relay replacement, protector part capacitor replacement, power amplifier part resistor replacement, interior and exterior inspection and cleaning, operation confirmation)
Accessories: No accessories
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/7 sales price 998,000 yen Maintained! A 4-way floor speaker made as a custom-made product for the previous owner who was involved in Coral. It has an all-Alnico unit configuration, and the mysterious carbon-like diaphragm used in the driver, the 38cm carbon cone woofer, and giant magnet are unique things not seen in other corals. It has a strong and powerful sound typical of the company (Murakoshi Yoichi)
Maintenance information: 2024.6.6 maintenance (exterior repair/polishing/painting, rear baffle repair/painting. Driver maintenance: magnetic circuit gap cleaning center adjustment, sound absorbing material replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal installation, new wiring between units, rear terminal board mounting processing)
Accessories: none
Main specifications: 3 way 3 speakers 8 ohm crossover 300 Hz/4 kHz/13 kHz W620 x H1050 x D560 mm (main unit)
The price has been reduced. 2024/6/15 Sales Price 168,000 yen This is the best model in the Concerto series. A floor-type speaker system using a passive radiator system. In addition to the smooth, high-quality sound unique to Sonas, the tone is bright and highly transparent. There is a repair mark on the bottom of one side of the saran net. There is damage near the terminal, and the jumper plate is missing (Daiki Goto)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: spikes
Main specifications: 2 way, 2 speakers, passive radiator, playback frequency band 40 Hz to 20,000 Hz, 87 dB impedance, 8 ohms, W240 x H1000 x D290 mm, 22 kg
*Currently sold. IFI-Audio phono equalizer. It is a compact yet high-spec model equipped with 6 stereo equalizer curves, a load transfer switch for MC cartridges, an ultra-low noise MC stage, a load transfer switch for MM cartridges, and a gain adjustment switch. The exterior is dull, there is a feeling of use, and there are places where the letters on the back have disappeared (Sasaki Shota)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: copy of manual, power cable
Main specifications: frequency characteristics 10 Hz to 100 kHz output impedance 110 ohms W68 x H28 x D158 mm weight 198 g
Maintained! It uses a CDM-1 swing arm mechanism and is representative of analog sound CD players. The high level of expressiveness that can bring out nuance, such as singing gently and playing strongly, is still popular today. Combinations such as tube amplifiers are standard. As for the exterior, the area near the VOL knob on the left side of the front is flat. Serial 5363 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Maintained (CD mechanical pickup repair. Lens dirt, turntable motor height correction. D/A converter IC replacement. (Exchange and check coupling C in other substrates)
Accessories: power cord
Main specifications: Philips CDM-1 swing arm mechanism with 100dB signal-to-noise ratio, attached functions/program memory, TNO/INDEX search auto pause display function/track & index number song progress/time remaining before elapsed W446 x H109 x D332 mm 9 kg
※Inexpensive because it is in poor condition. YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. In addition to the exterior and logo plate being misaligned, there is a lot of feeling of use, such as dullness, conspicuous abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
DENON analog player. The model is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 Operation confirmed
Accessories: connecting cable, adapter, dust cover
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Headphone amplifier for electrostatic ear speakers. Sound quality has been improved and wide range has been achieved, such as an all-stage direct connection A class DC amplifier configuration that does not use coupling capacitors, a custom-made 2-axis quadruple volume, and an XLR input terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: power cable
Main specifications: input XLR, RCA with RCA through out frequency characteristics DC to 90kHz rated input level 100mV/100V output W150 x H100 x D360 mm 3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 598,000 yen Manufacturer maintained! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that lets you hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
Accessories: none
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
Line noise filters. An accessory that thoroughly eliminates transient distortion generated within line cables and improves overall signal-to-noise ratio. Sounds that could not be heard until now appear clearly, and it becomes a dynamic playback sound that stretches and stretches from low to high frequencies (Tamura Eiji)
Maintenance information: 2024.6.9 operation confirmed
Accessories: No accessories
Main specifications: Input side: RCA jack Output side: RCA pin plug
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/2 sales price 79,800 yen A dedicated arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/8 sales price 20,000 yen Hamilex (Hayami Industries) glass AV rack with casters. It is also ideal for installing a flat screen LCD TV. Clear glass 12mm thick, silver pole The exterior has a feeling of use such as dullness (Yamato Yuki)
Accessories: none
Main specifications: W1050 x H538 x D45 mm 40.2 kg (actual measurement) 220 mm under 160 between shelves, total load capacity approx. 120 kg
Maintained by the manufacturer! Refined model of the PM-17SA. Further refinement has been applied to the highly transparent tone, which is clear and has good visibility. The thin and stylish design and the delicate expressiveness of modern SN are attractive. The subdued power draws more precise and expressive depictions. Serial MZ010248520101 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 manufacturer maintenance (speaker output relay replacement, amplifier board soldering correction, source direct SW disassembly and cleaning, inspection of each part, operation test implementation)
Accessories: remote control, instruction manual, power cable
Main specifications: equipped with pre-out power-in terminals 60W+60W (8Ω) W458 x H110 x D429 mm 16 kg
The balance cable is a 1.0m pair XLR female (2nd hot) to XLR male (3rd hot). The silver-plated OFC conductor is bright and clear, and you can enjoy the transparency of a PAD. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Maintained in 2017/7. Accuphase FM dedicated tuner. As a synthesizer tuner, it has satisfactory sound quality far surpassing tuners in the same price range. Not only does it have clear sound quality, but it also has a strong mid-range tone, and it is a high quality model that achieves both good sound quality and good reception performance. There are scratches, scratches, etc. on the exterior. Serial C9W680 (Takasaki Atsushi)
Maintenance information: 2021.7.15 maintained (glass exterior fog cleaning, FL tube fog stain cleaning, MPX separation characteristics readjusted, MUT level readjusted, meter display reset, and other adjustments are not possible)
Accessories: manual
Main specifications: FM dedicated tuner, quartz synthesizer system, 12 stations, random memory tuning, W465 x H135 x D340 mm, 6.0 kg
A stabilizer that appears to be made of brass. Details are unknown, but it is a sturdy construction with a profound feeling. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: diameter approx. 79 mm, height approx. 24 mm, weight: 934 g (all actual measurements)
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 1,600,000 yen ※This is a 50 Hz specification. Maintained! A new Studio Technik Dusch suspension on a glass turntable! Phonoiko is also a nice setting at 155th in the Franz era. The sharpness, precision of contouring, and a very thick sound are just words. A world-class player who still grabs the hearts of many analog fans and never lets go. Enjoy sounds that can only be experienced with EMT. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Maintained (930ST: motor detached/lubricated, adjusted. Replace deteriorated forward phase capacitors with new ones. Speed adjustment brake felt replacement Main bearing housing detachment, gasket replacement, bearing ball damage replacement, etc., sealant attachment assembly. Replace the motor bush with a new one that has deteriorated. Replace the deteriorated turntable anti-noise rubber belt with a new one. Replace the idler with a new one that has deteriorated. 155ST: Balance adjustment trimmer resistor defective replacement. NF gain adjustment trimmer resistor noise exchange. Foundation solder deterioration correction. audio measurements. SW/VR cleaning, coat processing. Left and right output adjustment (Running test OK)
Accessories: power cord, manual (copy), oil, connection cable (1 pair each of XLR and RCA)
Main specifications: idler drive system aluminum die-cast turntable rotation speed 33 1/3, 45, 78 rpm W490 x H234 x D410 mm [tone arm EMT929] dynamic balance type needle pressure range 0 to 5 g [equalizer amplifier 155 st] frequency characteristics 40 Hz to 20,000 Hz input impedance 140 to 200 ohms output impedance 200 to 600 ohms [cartridge TSD-15 ] MC type output voltage 0.15 mV suitable needle pressure 2.5 g impedance 24 ohms
The price has been reduced! 2024/6/10 sales price 79,800 yen with horseshoe ring. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. On the outside, oxidation can be seen on the horn part. Serial 104837 104761 (Tomonori Asae)
Maintenance information: 2023.12.24 sound output confirmed
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms (measured 8.9/9.1 ohms), crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/book
Set of 4 Kyocera ceramic insulators The top is made of metal and the bottom is made of cork material. It is clear and you can expect the unique sound of ceramics. The exterior has scratches and stains from use over time. (FUJISAWA KOSHI)
Accessories: none
Main specifications: diameter 30mm height approx. 15mm weight approx. 25g/piece
The disposal price has been reduced. Member discounts are not applicable. 2024/4/25 sales price 448,000 yen Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has good grease in the mid-range, and the pleasant tonal feel is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration replacement, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration replacement, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
A floor-type speaker with an authentic 3-way configuration with all-round appeal, from pure audio to theaters. The wide range playback has a sense of volume, and there is an exhilarating feeling that you can drop out the mids and highs that are particularly calm and easy to hear. There is a crack in part of the plastic that covers the magnet on the saran net (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: jumper plate
Main specifications: 3-way bass reflex type (non-magnetic) playback frequency band 45 Hz to 50 kHz impedance 6 ohms sound pressure level 89 dB W354 x H1,012 x D374 mm weight 25.0 kg
※There is no problem with operation, but the phono cable and original box manual are missing, so it's cheap. There is also only 1 weight. This is a masterpiece arm with one-point support, static balance, and oil dump system. The light arm movement and the sense of balance between the delicate high range and the power of the mid to low range are excellent (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: none
Main specifications: static balance type, total length 333 mm, effective length: 237 mm, overhang: 15 mm, needle pressure range: 0 to 3 g (0.25 g steps), compatible cartridge, dead weight: 3 to 17 g
MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. Familiar sound with a wide range. It has a supple sound and is comfortable to listen to. The needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.13 Sound output operation confirmed
Accessories: needle cover
Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
Maintained! More than 50 years have passed since the release of Sony's vintage pre-main. The innocent tone doesn't make you feel stressed is good, and the balance from treble to bass is good, and the tone control response is good. The retro-futuristic design is also impressive. *This unit does not use a speaker protection relay, so it may make an abnormal noise when the power is turned on and off, but this is a specification. There is a scratch on the cabinet on the exterior (Sasaki Shota)
Maintenance information: 2024.6.13 maintained (board repair due to poor contact within the TONE board, 4 transistors with PHONO noise were replaced, adjusted semi-fixed VR due to unstable idling voltage, contact repair due to poor contact with each push SW contact, and volume slide VR disassembly and cleaning were performed.)
Accessories: none
Main specifications: 35W+35W (8Ω) input sensitivity/impedance Phono 1.2mV/47kΩ Phono 2 system Tuner 1 system AUX 2 system Tape 2 system AC100V, 50 Hz/60 Hz 100 W 400 x H149 x D316mm weight 9.8 kg
※The earpads are not in good condition, so they are cheap. These open-air headphones feature well-balanced, natural sound from high to low frequencies. Try a slightly different sound from low impedance headphones. ※The cable has been replaced. On the exterior, there are dirt and cable marks on the earpads and head pads (Satoshi Yonejima)
Maintenance information: 2021.11.12 sweep test good
Accessories: original box
Main specifications: dynamic open air headphones, 300 ohms, 97 dB, 12 to 40,500 Hz, plug shape, 4.4 mm
6N copper wire with multiple gauge (wire diameter) structure is used to improve performance as a 1.0 m pair conductor of the RCA cable. You can enjoy the clear and fresh MIT sound even with this entry model. The exterior is dull and some characters are missing (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
This is the entry model for NORDOST with a 1.5m pair of RCA cables. The inexpensive yet clear and sharp sound inherits the taste of advanced models. It has creases and a bit of a habit (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: none
The XLR cable uses 1.0 m pair of high-purity silver wires and a multi-shield structure of Gore-Tex, copper foil, and Teflon. The high level of transparency that is clear and has no peculiarities is attractive. Fits a wide range of devices. (YONEJIMA Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: none
RCA cable 1.5m pair with AC adapter Synergistic Research's top-grade reference series entry model. 2-core twist construction The clear, three-dimensional, and realistic sound images unique to Synergistic are appealing. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: AC adapter
Speaker cable 2.0m pair end Y lug specification An old type of speaker cable using carefully selected vintage wires. Each has a different structure on the HOT and GND sides. Clear sound with good separation. The exterior has frayed cloth (Tamura Eiji)
Maintenance information: 2024.6.13 operation confirmed
Accessories: none
Thoroughly review the interior and carry out maintenance on capacitors, transistors, etc.! A vintage model representing JBL. In addition to the extremely powerful and well-extruded sound quality, it also has a dry and tight tone unique to this era. The strong sense of energy in the low frequencies and the characters with clear outlines are excellent matches with old JBL speakers. It is a vintage masterpiece that stands out for its individuality. There is a slight feeling of use on the exterior. Serial 2362 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 maintenance (test switch contact defects, other internal checks. DC leak due to leaks such as C in both ch couplings, poor Tr characteristics in the pre-stage, poor characteristics of the power stage Rch transistor x 1 → replacement. (Each VOL rotary SW is large → all cleaning, ~ operation check)
Accessories: instruction manual (copy), power cord
Main specifications: 40W+40W (8Ω) W412 × H128 × D350 mm 11.8 kg
An improved model of the S-77TWIN that adopted the vertical twin system. With a large sound field and clear sound image localization, there are few differences in sound, and it sounds smoothly and in a well-balanced manner, so you can enjoy it regardless of genre. The exterior has a feeling of use such as dullness, scratches, and cracks in the saran net. Serial JK0424 JK0425 (Hiroki Aso)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way 3 speakers, 18 cm cone type for low frequencies x 2, 2.5 cm dome type, vertical twin, bi-wiring compatible for high frequencies, 6 ohms, 35 Hz to 40000 Hz, 91 dB/w/m, W268 x H960 x D376 mm, 29 kg
Digital RCA cable 1.0m TARA LABS digital cable This cable is popular among enthusiasts for its clear and straight sound. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
SP cable BW (Y lug → banana) 2.0m pair early 90s Synergistic Research
cable You can fully feel the sound unique to SOLID and thick Synergy with this entry cable. The exterior is dull due to aging (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/7 sales price 89,800 yen*Inexpensive because the woofer cone is highly deformed. Maintained in January 2024! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.6.6 exterior repair maintenance (exterior chip repair (conspicuous areas only), front baffle painting) 2024.1.12 maintained (exterior repair stain colored front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
The price has been reduced! 2024/6/10 sales price 45,000 yen with original box! A Fostex subwoofer that was born as a superior model of the CW200A. It makes me feel that the potential is high not only for surround sound, but also for audio. The bass has a core and clear contours, and it firmly supports the foundation. The exterior has small scratches and dullness, and there is a feeling of use such as sunburn on the speaker terminals. Serial 1000852 (Tomoho Asaine)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: instruction manual, saran net power cable, original box
Main specifications: subwoofer with built-in amplifier, 300W, sealed acoustic suspension, simple anti-magnetic type, 4Ω, 90dB, W340 x H360 x D400 mm, 18 kg
Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg