Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji) Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed. Accessories: copy of the manual Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg
- description
- Rhodium plated The PSE standard cable clamp part was changed from conventional resin clamps to special stainless steel, which is heavy and has excellent damping properties. This effective vibration countermeasure maximizes the potential of the device (Oikawa Tetsuji) Accessories: none
- description
- It is inexpensive because it leaves a cigarette smell. A turntable seat with high vibration resistance made of porous ceramic. It is a porous ceramic with 45 micron pores in an alumina crystal, and can be expected to have high vibration resistance (Sasaki Shota) Accessories: none Main specifications: 303 mm in diameter, 7 mm in thickness, 1.2 kg in weight
- description
- A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke) Accessories: none Main specifications: aluminum stamping dead weight 8g
- description
- A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke) Accessories: none Main specifications: aluminum stamping dead weight 8g
- description
- A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji) Accessories: none Main specifications: aluminum stamping dead weight 8g
- description
- The high-quality textured design of KOJO TECHNOLOGY's “Virtual Earth” top cover with a satin white anodized finish is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in surface area, partial material changes, and S/N improvements, but also improvements in fineness (Sasaki Shota) Accessories: original box, manual, connection cable Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
- description
- A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi) Maintenance information: 2024.6.16 sound output confirmed Accessories: mounting screws Main specifications: aluminum stamping dead weight 8g
Manufacture:ROTEL
Price: JPY 27,091
- description
- The dust cover is missing. ROTEL record player. It is also recommended for those starting out with semi-automatic audio. Also, the design that blew through is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.6.14 maintenance (belt replacement, arm operation, voice check) Accessories: cartridge Main specifications: W436 x H130 x D350 mm 4.8 kg (actual measurement)
- description
- Manufacturer maintained, including pickup replacement! A CD player with a simple design, good cost performance, and easy for beginners. It is equipped with 10 keys that are convenient for station selection. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2024.6.13 manufacturer maintenance (loading belt/tray opening/closing SW exchange, laser pickup replacement, inspection of other parts, sound test) Accessories: none ※remote control missing Main specifications: 2 analog outputs (variable, fixed), 2 digital outputs (OPTICAL, COAXIAL) W433 x H115 x D288 mm 6.3 kg
- description
- By placing this plate between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Hiroki Aso) Accessories: none Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
Manufacture:USHER
Price: JPY 90,727(pair)
- description
- Comes with original box! This bookshelf speaker has an attractive sense of scale and volume of bass that cannot be achieved with speakers of the same size. The high range also uses a beryllium tweeter, so there is no cloudy sound and the tone is clear and bright. Overall, a model with excellent cost performance. Also, the design is excellent, and there is no doubt that it will look great as an interior decoration. In addition to dullness and small scratches on the exterior, there is a feeling of use such as dents and cracks. Serial B0871037 B0871037 (Hiroki Aso) Maintenance information: 2024.6.16 sound output confirmed (good sweep test) Accessories: Saran net jumper plate original box Main specifications: 18 cm cone woofer 3.1 cm beryllium tweeter playback frequency band 42 Hz to 35,000 Hz impedance 8 ohms output sound pressure level 87 dB external dimensions W260xH390xD430 mm weight 17.2 kg
- description
- Genuine Electri While being clear and precise, this is a powerful machine that also has the thickness and intensity of sound of successive Macintosh control amplifiers. It is a famous machine with a deep sense of nostalgia that is compatible with both vintage and modern models. Using the familiar 5-band equalizer, it is also possible to change the desired tone depending on the song. The exterior has blows, line scratches, and repair marks. Serial JHD3514 (Fujisawa Yukishi) Maintenance information: 2018.8.30 Maintained (main volume, balance volume, etc. Contact cleaning. Switch contact cleaning. Head amplifier section and EQ volume circuit capacitor replacement. Power cord replacement. (Check the operation of each input/output) Accessories: No accessories Main specifications: built-in monitor amplifier with 5-band equalizer (20W x 2/8Ω), compatible with balanced input/output, PHONO (MM) compatible, W468 x H183 x D432 mm, 12 kg
- description
- ※There is no problem with the operation, but the AC adapter sticking is sweet. A D/A converter with a unique design. The design concept, which places emphasis on musicality over physical characteristics, is an attractive sound not found in Japan. Please enjoy the warm, thick sound quality. (FUJISAWA KOSHI) Maintenance information: 2024.6.15 Operation confirmed Accessories: AC adapter Main specifications: HDCD compatible, output RCA x 2, digital input optical x 1, coaxial x 1, W107 x H107 x D205 mm, 1.3 kg
- description
- Pioneer carbon fiber molded headshell. Simple and easy to use design. It is also attractive that it has a slightly lighter weight and is easy to combine. The exterior is dull (Fujisawa Yukishi) Maintenance information: 2024.6.15 continuity confirmed Accessories: No accessories Main specifications: carbon fiber molding dead weight 9.5 g
- description
- ※Inexpensive because it is in poor condition. YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. In addition to the exterior and logo plate being misaligned, there is a lot of feeling of use, such as dullness, conspicuous abrasions, etc. (Kobayashi Hitoshi) Accessories: none Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
- description
- Set of 3 An insulator with the same direction of sound based on the company's PB-REX. It is designed to be aligned not only vertically but also horizontally, so precision and a high signal-to-noise ratio can be expected. There are dullness and small scratches on the exterior (Yamato Yuki) Accessories: none Main specifications: spike diameter 35 mm x height 15 mm weight 79 g spike receiving diameter 35 mm x height 10 mm weight 76 g (actual measurement)
- description
- Maintained by the manufacturer! Refined model of the PM-17SA. Further refinement has been applied to the highly transparent tone, which is clear and has good visibility. The thin and stylish design and the delicate expressiveness of modern SN are attractive. The subdued power draws more precise and expressive depictions. Serial MZ010248520101 (Murakoshi Yoichi) Maintenance information: 2024.6.13 manufacturer maintenance (speaker output relay replacement, amplifier board soldering correction, source direct SW disassembly and cleaning, inspection of each part, operation test implementation) Accessories: remote control, instruction manual, power cable Main specifications: equipped with pre-out power-in terminals 60W+60W (8Ω) W458 x H110 x D429 mm 16 kg
- description
- The price has been reduced! 2024/6/14 Sonas Faber's current speaker, Lumina 1, is now available at a sales price of 99,800 yen! Not to mention the high level of design typical of Italian products, the sound structure and high sense are truly a word. Please try it by reproducing a compact yet rich sound field and a smooth high frequency with a high sense of transparency. The condition is generally good. Serial 2870 2870 (Yamato Yuki) Maintenance information: 2024.6.14 sweep test good Accessories: saran net Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, crossover frequency, 2 kHz, frequency characteristics, 65 Hz to 24,000 Hz, output sound pressure level, 84 dB, impedance, 4 ohms, W148 x H280 x D220 mm, weight 4.5 kg/book
- description
- Maintained by the manufacturer! Accuphase mid-size model equipped with phono (MM/MC). Stable sound quality with high S/N, high resolution and high transparency. Also, just like this age, the bass has elasticity and energy, so you can enjoy it regardless of the music genre. On the exterior, there is a feeling of use such as small scratches and dirt on the front, and dullness of the terminals. Serial E5Y882 (Kanai Hidetsugu) Maintenance information: 2024.6.13 manufacturer maintenance (main volume, balance volume cleaning, meter, input switch replacement, inspection, adjustment, safety check, pressure resistance check) Accessories: remote control, instruction manual, power cable, original box Main specifications: output 100W+100W (8Ω) power consumption 290W 8Ω load rated output 390W phono input 1 system (MM/MC switching) line input 7 systems (balanced x 2 systems, unbalanced x 5 systems) tape system 1 system dimensions W475 x H170 x D418 mm weight 20.2 kg
- description
- Choke transformer 5h/250mA DC resistance 67Ω (measured 66.6Ω), outlet wire length approx. 60 mm (measured) W78 x H94 x D74 mm 1.8 kg, dull and dirty (Kojima Yosuke) Accessories: none
- description
- Choke transformer inductance 15H/0.1A DC resistance 247.3 Ω (actual measurement 245.9 Ω) W63 × H100 × D50 mm 1.2 kg (actual measurement, not including protrusions) Surfaces other than the terminal side are painted gray, and the name plate part is also painted (Kojima Yosuke) Accessories: none
- description
- Choke transformer inductance 10H/200mA DC resistance 101.3 Ω (actual measurement) W90 × H105 × D90 mm 3.4 kg (actual measurement, not including protrusions) (Kojima Yosuke)
- description
- Choke transformer inductance 10H/200mA DC resistance 101.3 Ω (actual measurement) W90 × H105 × D90 mm 3.4 kg (actual measurement, not including protrusions) (Kojima Yosuke) Accessories: none
- description
- Choke transformer 30h/100mA DC resistance 285Ω (actual measurement) W81 x H102 x D69 mm approx. 2.0 kg (actual measurement, not including protrusions) There are some hook scratches (Kojima Yosuke) Accessories: none
- description
- Since it is a custom-made product sold as an input transformer pair, the specifications are unknown, but they are described by hand. Primary: 600 Ω Secondary: 20 kΩ CT The resistance value has been measured with a tester (1-3:20.7 Ω, 2-4:20.7 Ω, 5-7:198.3 Ω, 6-8:198.8 Ω) W78 x H110 x D66 mm approximately 1.6 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke) Accessories: none
- description
- This is a specially designed product in which the company's original neighboring bronze machined pin terminals are set on the HS-1A using African ebony wood, and 6N copper wire with excellent sound quality is used as the shell lead. Since lead wires are soldered to the terminals on the arm side, sound quality improvement effects can also be expected due to a reduction in electrical contacts (Murakoshi Yoichi) Maintenance information: 2024.6.11 continuity confirmed Accessories: mounting screws Main specifications: African ebony wood (eco-paint buff finish), brass finger tips (non-magnetic gold plated finish), own weight 10.2 g
- description
- ※The cantilever is slightly to the right. This is the GE successor to the MC cartridge masterpiece SPU. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to the conventional wild tone. The needle cover is missing, rust floats on the G-shell terminal surface, and there is rust on the cantilever (Murakoshi Yoichi) Maintenance information: 2024.6.14 sound output confirmed Accessories: none Main specifications: MC type elliptical needle output voltage 0.2 mV playback frequency band 20 to 20,000 Hz load resistance 10 ohms or more impedance 3 ohms needle pressure 3.0 to 4.5 g dead weight 32 g
- description
- The price has been reduced! 2024/6/14 sales price 26,800 yen The stand is made of magnesium alloy, and the top plate and bottom plate have a structure made of aluminum and steel plywood. Ultrafine sand is encapsulated inside the pillar and thorough anti-vibration treatment has been applied (Asae Tomo Law) Accessories: none Main specifications: top plate W160 x D210 mm bottom plate W220 x D270 mm height 700 mm weight 8.5 kg
- description
- Maintained! More than 50 years have passed since the release of Sony's vintage pre-main. The innocent tone doesn't make you feel stressed is good, and the balance from treble to bass is good, and the tone control response is good. The retro-futuristic design is also impressive. *This unit does not use a speaker protection relay, so it may make an abnormal noise when the power is turned on and off, but this is a specification. There is a scratch on the cabinet on the exterior (Sasaki Shota) Maintenance information: 2024.6.13 maintained (board repair due to poor contact within the TONE board, 4 transistors with PHONO noise were replaced, adjusted semi-fixed VR due to unstable idling voltage, contact repair due to poor contact with each push SW contact, and volume slide VR disassembly and cleaning were performed.) Accessories: none Main specifications: 35W+35W (8Ω) input sensitivity/impedance Phono 1.2mV/47kΩ Phono 2 system Tuner 1 system AUX 2 system Tape 2 system AC100V, 50 Hz/60 Hz 100 W 400 x H149 x D316mm weight 9.8 kg
- description
- ※6 month warranty. This is the DCD-100 thin CD player that is the best match for the DRA-100 network receiver in the DENON design series. Full digital processing is possible by combining it with the DRA-100. Of course, it's attractive enough as a standalone CD player, and it's a high cost performance machine that allows you to listen to smooth sound without habit (Sasaki Shota) Maintenance information: 2024.6.13 operation confirmed Accessories: remote control, manual, power cable Main specifications: slot-in CD mechanism 384 kHz/32 bit compatible D/A converter compatible with MP3 and WMA data disc playback size: W280 ✕ H71 ✕ D305 mm 4.2 kg
- description
- Output transformer sales secondary: 50-100-200Ω x 2 ※ The primary side seems to be 5 kΩ from the model number. The resistance value has been measured by the tester (between P1-P2:141.8 Ω, between P1 (P2) -B: 71.0 Ω, between 0-50 Ω: 8.2 Ω, between 0-100 Ω: 11.5 Ω, between 0-200 ohms: 16.1 Ω) W110 x H150 x D80 mm 3.6 kg/pcs (actual measurement, not including protrusions) There are fine scratches and paint peeling (Kojima Yosuke ) Accessories: none
- description
- ※The manufacturer logo on the front is missing, so it's cheap. Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. There are scratches, bumps, dirt marks, etc. on the exterior. Serial 613082601 (Tamura Eiji) Maintenance information: 2024.6.13 maintained (input selector, etc., switch dismantling and polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor), output relay replacement, protector part capacitor replacement, power amplifier part resistor replacement, interior and exterior inspection and cleaning, operation confirmation) Accessories: No accessories Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
- description
- The XLR cable uses 1.0 m pair of high-purity silver wires and a multi-shield structure of Gore-Tex, copper foil, and Teflon. The high level of transparency that is clear and has no peculiarities is attractive. Fits a wide range of devices. (YONEJIMA Satoshi) Maintenance information: 2024.6.11 continuity confirmed Accessories: none
- description
- Maintained! Comes with a wood case. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and 7 source input selectors, is also attractive (Murakoshi Yoichi) Maintenance information: 2024.6.13 maintenance completed (each SW/VOL cleaning, pin jack cleaning, panel peeling correction (characters not allowed), lamp deterioration replacement, push button dismantling and cleaning, resistance burning replacement due to film C short in balance loudness board, .regulator IC defect replacement, operation check ※ balance gap cannot be completely removed) Accessories: instruction manual Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
- description
- An acoustic panel for floors that mainly diffuses rather than absorbs sound. It is designed so that an overwhelming effect can be obtained in a limited space. The exterior is dull and has a feeling of use (Hiroki Aso) Accessories: none Key Specifications: Hybrid Diffusion Floor Panel W680 ✕ H36 ✕ D680mm 4kg
- description
- An acoustic panel for floors that mainly diffuses rather than absorbs sound. It is designed so that an overwhelming effect can be obtained in a limited space. The exterior is dull and has a feeling of use (Hiroki Aso) Accessories: none Key Specifications: Hybrid Diffusion Floor Panel W680 ✕ H36 ✕ D680mm 4kg
- description
- Set of 4 A beautiful banana plug with a no-waste design. Sound quality without loss is attractive (Daiki Goto) Maintenance information: 2024.6.12 continuity confirmed Accessories: original box Main specifications: insert pin, phosphor bronze body, copper alloy, non-magnetic rhodium-plated cable, suitable diameter ~ 5.5 mm, insert pin length 19.5 x diameter 4.3 mm, outer diameter 10.8 mm, total length 49.6 mm
- description
- Set of 4 A beautiful banana plug with a no-waste design. Sound quality without loss is attractive (Daiki Goto) Maintenance information: 2024.6.12 continuity confirmed Accessories: original box Main specifications: insert pin, phosphor bronze body, copper alloy, non-magnetic rhodium-plated cable, suitable diameter ~ 5.5 mm, insert pin length 19.5 x diameter 4.3 mm, outer diameter 10.8 mm, total length 49.6 mm
- description
- By placing this plate between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Satoshi Yonejima)
- description
- ※ Sub weight is missing. Dust cover hingeless design 5th generation of the SL-1200 series. This is a high-grade model manufactured to commemorate the 30th anniversary. Its accuracy and durability are outstanding among many players, and it features clear sound with clear outlines. There is dullness, small scratches, and threads on the dust cover (Daiki Goto) Maintenance information: 2024.6.11 operation confirmed Accessories: dust cover, EP adapter Main specifications: manual quartz direct drive 33/45 rotation universal S-shaped tone arm static balance type needle pressure adjustment range 0 to 4 g W453 x H162 x D353 mm 11.7 kg
- description
- YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. The logo plate is curved, and there is a large repair mark one step below (Oikawa Tetsuji) Accessories: none Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
Manufacture:ASC
Price: JPY 29,818 Sold Out
- description
- Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae) Accessories: none Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Manufacture:ASC
Price: JPY 29,818 Sold Out
- description
- Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae) Accessories: none Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Manufacture:HAMILEX
Price: JPY 7,273(pair)
- description
- A stand for small speakers with a simple design. With a height of 57 cm, this stand is easy to use. Scratches, dullness, and a feeling of use can be seen on the exterior and top plate (Kobayashi Hitoshi) Accessories: none Main specifications: total load capacity 50 kg, external dimensions W280 x H570 x D295 mm, top plate size W190 x D230 mm, weight approx. 4 kg
- description
- J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI) Main specifications: diameter 35 mm x height 15 mm
- description
- J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI) Accessories: none Main specifications: diameter 35 mm x height 15 mm
- description
- Krypton high carbon steel insulator set of 4 It is a product that greatly improves acoustical and physical properties such as sound propagation speed with a special hard coating. The bottom surface uses silicone rubber material that dampens the natural vibrations of the metal and has an anti-slip effect with the floor, and has an adhesive effect on the floor. (FUJISAWA KOSHI) Accessories: original box Main specifications: flat type, diameter 40 x height 10 mm, 95 g per piece
- description
- Set of 4 An ideal acoustic damping material (sorbosane) is used. It helps improve the sound quality of players, amplifiers, etc. (FUJISAWA KOSHI) Accessories: No accessories Main specifications: load capacity 80 kg; size: diameter: 50/5 mm thick
- description
- J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI) Main specifications: diameter 35 mm x height 15 mm
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
