original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.10 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: No accessories
Main specifications: aluminum alloy with a dead weight of about 8 g
Set of 2 Hybrid audio board with wooden structure plus iron ball sand. The low frequencies, which are well-balanced and have a sense of volume, are tones that cannot be produced with a board such as granite. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: No accessories
Main specifications: load capacity 100 kg W300 x H44 x D 400 mm 5.5 kg/1 sheet
The price has been reduced! 2024/6/10 sales price 79,800 yen with horseshoe ring. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. On the outside, oxidation can be seen on the horn part. Serial 104837 104761 (Tomonori Asae)
Maintenance information: 2023.12.24 sound output confirmed
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms (measured 8.9/9.1 ohms), crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/book
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Set of 2 Hybrid audio board with wooden structure plus iron ball sand. The low frequencies, which are well-balanced and have a sense of volume, are tones that cannot be produced with a board such as granite. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: No accessories
Main specifications: load capacity 100 kg W300 x H44 x D 400 mm 5.5 kg/1 sheet
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Accessories: none
Main specifications: W600 x H1200 x D230 mm 16.5 kg
This is a QRD sound diffusion panel. By placing it behind the speaker, exquisite absorption and diffusion are possible, which is useful for improving sound image localization. There are spots and small scratches on the exterior (Tomonori Asae)
Main specifications: W600 x H1200 x D230 mm 16.5 kg
The price has been reduced! 2024/6/11 sales price 69,800 yen ※Currently sold. Aiwa's DSD DAC. A/D converter and D/A converter set. It is possible to reproduce DSD 1-bit 64fs signals in SACD format. Even with analog input from compressed sound sources such as MP3s, the sense of localization, sound field, and luster of sound are improved. Serial D101211111 WD01210911 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: power adapter, HMDI connection cable, instruction manual
Main specifications: AX-D1: DSD1 bit/64 fs playback frequency band 20 Hz to 100 kHz (+0/-3 dB) dynamic range 102 dB or more, SNR ratio 102 dB or more at 1 kHz, 107 dB or more at 20 kHz channel separation 100 dB or more size W250 x D170 x H50 mm weight 1.5 kg AX-WD: LPCM192 kHz/24 bit/128 fs DSD1 bit/ 64fs (DSD64 mode, 2.8224MHz) size W250 x D170 x H50 mm weight 1.6 kg
The price has been reduced! 2024/6/11 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good, although there are very few minor scratches on the top plate. Serial AUY15230905053 (Takahashi Nobuyuki)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, remote control, power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The price has been drastically reduced! 2024/6/11 sales price 35,000 yen with dedicated stand LS-500! Spirit is one of the most popular in the SX-500 series. Like Victor, who continues to preserve the natural sound, it makes acoustic instruments and vocals sound lustrous. There is a feeling of use on the exterior such as scratches and fading (Tamai Jun)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: dedicated stand jumper cable
Main specifications: Sealed bookshelf type Alnico unit, body size dimensions W270 x H455 x D255 mm, 12.5 kg, stand size W294 x H440 x D330 mm, stand weight 6 kg
Harmonic resolution stabilizer. By placing an analog disc on the turntable shaft, resonance of the LP record itself, vibration due to air propagation, and noise caused by vibration of the record player itself are suppressed. The synergy effect with the isolation bass is remarkable, and you can expect rich sound quality and consistent low-level performances (Tamai Jun)
Accessories: original box instruction manual
Main specifications: size φ82.5 mm x H34.3 mm weight 315 g
The price has been reduced! 2024/6/13 sales price 898,000 yen This is the second self-confident work by Franco Serbrin, who worked on famous Sonas Faber machines. The afterglow of the sound is beautiful, and you can hear a sound rich in scale for its size. You can feel the warmth of the sound from the enclosure, which is made of solid walnut wood using the technique of marquetry. A network is mounted on a dedicated speaker stand, making it a virtually integrated structure. This is a high quality pair that I can recommend for both design and sound quality. On the exterior, in addition to peeling on the front baffle, there are places where there is slight stickiness. The string net is in excellent condition. Serial 127 127 (Yamato Yuki)
Maintenance information: 2024.6.13 operation confirmed
Accessories: Spike Spike Pickup and Handling Instructions
Main specifications: 2-way, 2-speaker equipped unit: tweeter/29mm silk dome type (Ragnar Lian design) woofer/150mm custom-made sliced paper cone type 4Ω efficiency 87dB frequency band 40Hz to 33kHz body/W190 x H360 x D360 mm 8 kg stand/H740 mm 8 kg
An improved model of the S-77TWIN that adopted the vertical twin system. With a large sound field and clear sound image localization, there are few differences in sound, and it sounds smoothly and in a well-balanced manner, so you can enjoy it regardless of genre. The exterior has a feeling of use such as dullness, scratches, and cracks in the saran net. Serial JK0424 JK0425 (Hiroki Aso)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way 3 speakers, 18 cm cone type for low frequencies x 2, 2.5 cm dome type, vertical twin, bi-wiring compatible for high frequencies, 6 ohms, 35 Hz to 40000 Hz, 91 dB/w/m, W268 x H960 x D376 mm, 29 kg
The price has been reduced! 2024/6/13 sales price 49,800 yen This high CP model was released in the 49th year Diaton was founded. It has a very well-balanced, rounded, and gentle tone. You can do everything from jazz and rock to classical and pop music as an all-rounder. In addition to dullness and small scratches on the exterior, there is a feeling of use such as dents on the grill. Serial 18671 18688 (Hiroki Aso)
Maintenance information: 2024.6.13 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, 6.3 ohms, sound pressure level, 90 dB, W380 x H680 x D295 mm, weight 25 kg
An acoustic panel for floors that mainly diffuses rather than absorbs sound. It is designed so that an overwhelming effect can be obtained in a limited space. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
Key Specifications: Hybrid Diffusion Floor Panel W680 ✕ H36 ✕ D680mm 4kg
An acoustic panel for floors that mainly diffuses rather than absorbs sound. It is designed so that an overwhelming effect can be obtained in a limited space. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
Key Specifications: Hybrid Diffusion Floor Panel W680 ✕ H36 ✕ D680mm 4kg
An upper and lower pin structure is used to make the pressure at the contact point uniform. Contact surface stabilization is achieved with a spherical washer. High rigidity is maintained by completely machined super duralumin and manufactured in an integrated manner up to the finger holder (Asae Satoshi Method)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Main specifications: Super duralumin fully integrated machined body, black nickel plating, weight 10.5 g (lead wire not included), 11.0 g (lead wire included)
optical cartridges. The cantilever has become boron, and I feel that the overall density, especially in the low range, has increased. The quietness and sense of speed that makes you forget you're listening in analog for a moment have been particularly improved, and it's a convincing degree of perfection that it can be positioned as a new reference (Asaine Tomoho)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: original box screw hex wrench
Main Specifications: Power Generation Method Photoelectric Cantilever Boron Body Material Machined Aluminum Needle Pressure 1.85g-2.05g (Recommended 1.95g) Weight 7.9g
The balance cable uses an 8-core multi-hybrid conductor with 2 pairs of 4 types of copper wires arranged in each of the 4 types of 1.0 m pair, 7N ultra-thick high-purity copper wire AgA silver-plated annealed copper wire, PCOCC single crystal oxygen-free copper wire, and OFC oxygen-free copper wire. This cable has an excellent balance between sound thickness and stretchability (Tomoho Asaine)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. The condition is generally good. Serial M20700210A (Yamato Yuki)
Maintenance information: 2024.6.13 operation confirmed
Accessories: instruction manual power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, so it's fun to drive the sound quality to your own liking (Tomoho Asaine)
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 1.2 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable 2.0m pair genuine molded plug, the honest, thick, and powerful sound with medium and low sounds that are unimaginable from the way they look is addictive (Tomoho Asaine)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Maintained in 2023/12! A stereo power amplifier that takes into account ease of use in multi-channel systems, a must-see for multi-channel systems! Contrary to its cute size, it has quite a bit of driving power. The sound is energetic and fresh, just like Sony of this era. There is a feeling of use on the exterior such as line damage or dullness. Serial 205245 (Tomoho Asaine)
Maintenance information: 2023.12.5 maintained (power supply micro SW deterioration replacement, semi-fixed VR replacement for bias adjustment, input RCA terminal L/R poor contact exchange transistors with noise at 2 locations, other DC bias adjustment connection sound confirmation)
Accessories: none
Main specifications: 40W+40W (8Ω) W200×H149×D320 mm 6.5 kg
Maintained in 2023/5! A 2-way and 3-way channel divider that can be switched in a variety of ways. It is compatible with various crossovers, can be adjusted at a detailed level, and is extremely easy to use. The exterior has a feeling of use such as dullness. Serial 200213 (Tomoho Asaine)
Maintenance information: 2023.5.11 Maintained (power supply fuse replacement, other sound output during confirmation, transistor and capacitor replaced to confirm Chilean noise, current output test after parts replacement)
Accessories: copy of instruction manual
Main specifications: 3-way/2 way Low150/250/400/600/800/1kHz High1.5k/2.5k/3.5k/4.5k/6k/8kHz W200×H149×D316mm 3.8 kg
Case included. Higher-OFC is coated with high-purity silver for the 1.5m conductor of the power cable, and rhodium plating is used for the plug. The center of gravity changes to a thicker sound quality with a lower center of gravity. The exterior is a beautiful item with no feeling of use. (Yamato Yuki)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: case
Set of 3 An insulator with the same direction of sound based on the company's PB-REX. It is designed to be aligned not only vertically but also horizontally, so precision and a high signal-to-noise ratio can be expected. There are dullness and small scratches on the exterior (Yamato Yuki)
Accessories: none
Main specifications: spike diameter 35 mm x height 15 mm weight 79 g spike receiving diameter 35 mm x height 10 mm weight 76 g (actual measurement)
Case included. Higher-OFC is coated with high-purity silver for the 1.5m conductor of the power cable, and rhodium plating is used for the plug. The center of gravity changes to a thicker sound quality with a lower center of gravity. The exterior is a beautiful item with no feeling of use. (Yamato Yuki)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: case
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. The exterior is damaged and dull, and there is a feeling of use due to aging (Tamai Jun)
Maintenance information: 2024.6.15 sound output confirmation maintenance completed (32009 side rotary switch disassembly cleaning exterior/terminal cleaning internal parts fixed row correction waveform confirmation)
Accessories: none
Main specifications: crossover frequency/500 Hz level control/3 position switch 8 ohm size W159 x H153 x D120 mm 2.3 kg
※6 month warranty. DENON's pre main amplifier with excellent cost performance. It is also suitable for entry machines and second systems. There are threads and dullness on the exterior (Tomonori Asae)
Maintenance information: 2024.6.14 Operation confirmed
Accessories: ※ remote control missing power cord (general purpose product)
Main specifications: 70W+70W (8Ω) 140W+140W (4Ω) PHONO/MM/MC switching compatible W434 x H134 x D407 mm 14.6 kg
*Currently sold. BOSE's high cost performance model for a wide variety of applications. It reproduces sounds unique to BOSE that are powerful and sharp, such as jazz, rock, etc. You can feel the spread of the sound by swapping the position of the tweeter left and right and listening. Overall, there is dirt and a feeling of use. Serial 0179589830119A 017958983030119B (Tomoho Asaine)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, 8 ohms, maximum input 60 W, W380 x H240 x D170 mm, 3.9 kg
1 sheet only The TAOC Sycamore Sound Creation Board is now in stock. How about it under the feet of tall boy speakers with spikes, which are common these days, and I recommend it to those who want to keep the bass sharp. There is a slight feeling of use on the exterior, but it is relatively good with no conspicuous scratches etc. (Asaine Tomoho)
Accessories: none
Main specifications: melamine veneer, cast iron powder, high-density wood board x 2, 5-layer structure of phenolic laminated board, external dimensions W350 x D450 x H40 mm, weight 5.0 kg