Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 manufacturer maintained (arm disassembly repair, arm position detection CDS replacement, lead-in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained by the manufacturer (due to disconnection of the motor coil of the monitor inside the arm, the arm's UP/DOWN operation is fast and the operation fails → remove the arm and replace it. Arm position detection CDS replacement. Lead in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 manufacturer maintained (arm disassembly repair, arm position detection CDS replacement, lead-in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
This is a speaker system mounted on Altec's coaxial 8-inch unit 409-8E. The compatibility between Yonematsu, which has a good sound, and the bright and light 409-8E is excellent, and drinking drops to the medium to high range, which has a nice texture. The light, mid-range tone goes great with old sauces. There is dullness and small scratches (Sasaki Shota)
Maintenance information: 2024.5.23 Sound output test is good
Accessories: none
Main specifications: Unit used: 409-8E playback frequency band 85 to 18,000 Hz efficiency 97 dB W377 x H432 x D189 (top surface) 238 (bottom) mm 6.4 kg (actual measurement)
Pair tube direct heat triode tube American square getter measurement value 64/60 (rejection value 38) The number of getters has decreased for both tube*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The pair tube is thought to be made by TESLA due to its 6CA7 compatible ball brown base double ring getter structure. Measured value 52/52 (rejected value 30) with white box ※Pairs are judged based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Set of 4 large insulators. The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
Tannoy Mercury series small bookshelf. It uses network technology that follows the technology of the company's Prestige “SE” series. Silver-coated copper wire manufactured by Vandenhall is used for internal wiring to enhance sound quality. There are dust stains on the tweeter dome, small scratches such as peeling veneer on the upper front corner, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2 way 8Ω 86dB W140 × H210 × D160 mm 2.2 kg
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. There are repair marks on the edge (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained (voice coil, grommet, tinsel, and connection terminal parts were polished, connected with aluminum solder, and improved contact. Edge crack repair)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
1 bottle sold in England Xf1 6CA7 compatible ball tea base double ring getter date code: Xf1 B1I4 measured value 46 (rejected value 30) with white box (written on the box), there is getter burn, and it has decreased slightly (Kojima Yosuke)
Accessories: white box
*This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve deterioration replacement. AC cord deterioration, replacement. Main bearing disassembly, bearing thrust wear, replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing or added; nuts, metal washers, and rubber washers added. Running test → OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: none
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
MC step-up transformer. It features a body structure that thoroughly eliminates magnetic noise. The sound is fresh and smooth. The range is also wide, and the sound quality is relaxed and elegant. There are a few small scratches. Serial T30905032 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: instruction manual
Main specifications: Compatible cartridge impedance 1.5 to 40 ohms load impedance 47 kΩ boost ratio 26 dB W133 x H85 x 129 mm 1 kg
Chinese SMSL D/A converter. ESS's ES9068AS is used as the DAC. Although it is inexpensive, it supports a wide range of inputs such as AES/EBU and I2S. The exterior is dull. Serial 4600010200207 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: input USB, optical, coaxial, I2S, 1 AES/EBU system each, W210 x H40 x D170 mm 1.2 kg
One owner item with original box! Mono cartridge for SP boards. This is a reprint of the CG65D. You can enjoy the SP board with a firm core and a bold tone. There is little feeling of use and the condition is good. Serial 721447 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: instruction manual, original box
Main specifications: MC type needle pressure 4.5 g output voltage 1.5 mV frequency characteristics 20 to 18,000 Hz impedance 6 ohms dead weight 35 g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. There are no needle bends. Serial 4623 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Tokyo soundproof turntable seat using vibration-absorbing rubber. The vibration convergence time is overwhelmingly fast, and it effectively absorbs unwanted vibrations in the frequency band that is important for music playback. (FUJISAWA KOSHI)
Accessories: case
Main specifications: size 4 mm thick x 291 mm diameter weight 330 g
Comes with original box! Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images. (FUJISAWA KOSHI)
Accessories: original box
This is a turntable sheet using TEAC Japanese paper. In order to solve the problem of dust adsorbing on vinyl records, Japanese paper that is less likely to charge electricity is used. We use stone paper with an appropriate amount of mass. (FUJISAWA KOSHI)
Accessories: case
Main specifications: W300 x H300 x D1 mm, weight approx. 44 g
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place a needle. The LCD screen is backlit and equipped with an auto off function. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: original box, case
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
RCA cable 0.7 m pair reverse twist structure, brass machined plugs, etc. are RCA cables that have introduced a considerable amount of materials in this price range. It is a sharp cable with medium to high frequencies. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
RCA cable 0.7 m pair reverse twist structure, brass machined plugs, etc. are RCA cables that have introduced a considerable amount of materials in this price range. It is a sharp cable with medium to high frequencies. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 6 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 4. An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. There are some small scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
Refresh yourself with internal and external maintenance! This is an attractive mid-size model with the large 38cm HPD385 unit pressed into a compact enclosure. It has good phase characteristics, and its highly textured, and moist tone makes classical music and vocals sound pleasant. The exterior has been beautifully finished due to maintenance. Serial 509925 509926 (Hiroki Aso)
Maintenance information: 2024.5.23 Maintained (exterior cleaning/repair/touch-up front baffle coating unit maintenance (edge damping agent coating high range side magnetic circuit rust removal/gap cleaning/center adjustment) ATT cleaning unit detached)
Accessories: saran net
Main specifications: coaxial 2-way speaker, front bass reflex system, 8Ω, 91 dB, W540 x H840 x D310 mm, 32 kg
A typical woofer attached to first-class products such as the Exclusive2402 and Westlake Audio. It is a highly stable model that can withstand professional use. The response speed is fast and the sound that makes it stand up well is attractive. The exterior is generally beautiful (Tomonori Asae)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: none
Main specifications: 40cm cone woofer frequency characteristics 28 Hz to 1000 Hz 8 ohms (measured 7.9 ohms) output sound pressure level 97 dB dimensions diameter 400 mm x depth 167 mm 11 kg/1
Celestion bookshelf speakers Using a felt fiber cone for the woofer diaphragm and a titanium diaphragm for the tweeter, the mid-range is slightly glittering. It creates what is called a British sound. The exterior has dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2-way 2-speaker sealed unit, 15 cm cone type, 2.5 cm dome type for low range, frequency characteristics, 75 Hz to 20 kHz, impedance 8 ohms, size W 185 mm x H310 mm x D 215 mm, weight 4 kg
Maintained! A masterpiece power amplifier with an all-FET circuit configuration. The size of the sound stage and the quick attack and the way the penetrating sound disappears are excellent. The hairline finish on the front panel and the LED switch with an impressive orange light are also attractive. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 02545 (Hiroki Aso)
Maintenance information: 2024.5.23 Maintained (defective parts replacement in the main amplifier power supply circuit, bad output relay contact replacement, input volume contact correction)
Accessories: copy of instruction manual
Main specifications: 350W+350W (4Ω) 240W+240W (8Ω) W435 × H182.7 × D361.5 mm 20.9 kg
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Exclusive audio rack made of wood fiber plywood and metal posts, with casters. The sturdy construction typical of TAOC is attractive. It is a rack where you can aim for stable sound quality without coloring. The effective height is 180 mm for the upper and middle steps and 230 mm for the lower tier. There are wounds, stains, abrasions, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: load capacity 1 stage 100 kg W600 x H835 x D550 mm 27 kg
※Whether it is a genuine product is unknown. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
A full-range speaker with a high BOSE interior. 1 bottle only. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Maintenance was carried out, including the replacement of internal deteriorated capacitors! This is Marantz's masterpiece power amplifier model 5, which has not arrived in a long time. Not only is the range unbelievably wide when viewed from the year it was released, but the excellent driving power and glossy tone are truly a masterpiece with a high reputation. There are scratches and paint peeling on the exterior. Serial 1017/1024 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 Maintained (AC cord film deterioration → rewiring procedure. ◎ Common · 1 x 2 inch nuts added for bottom legs (please be careful when opening the back side) · 20 μF or other deterioration replacement and additional 4 x 2 · selenium deterioration → diode addition, BIAS and AC BAL readjustment, vacuum tube socket and RCA jack caulking repair. *Other operation checks have been performed (measured at 30 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: No accessories
Main specifications: mono tube power amplifier output 30W (UL connection) EL34 push pull W152 x H186 x D378 mm 13.4 kg
Maintained! It is the 5th generation of the 907, the top model in the D series that continues to be popular. Brush-ups have been made, such as strengthening the power supply section from the previous game, and the ability to reproduce the low frequency range has been improved. Precision is also added to the wild Sansui sound that feels torque, making it fun to listen to classical music. The exterior has line scratches, threads, and chips in the corners. Serial 605104895 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, subsonic, CD direct, muting, input selector (all), reck-out, phono selector switch disassembly polishing grease application, output relay replacement, protector transistor replacement, power supply unit, constant current diode, resistor exchange, selector lamp replacement, adjustment volume replacement, solder repair, SP selector fixed, master volume, other VR Cleaning, internal inspection cleaning, adjustment inspection, operation confirmation. (*Relay operation takes 15 to 20 seconds)
Accessories: No accessories
Main specifications: 160W+160W (8Ω) PHONO (MM/MC) compatible W466 x H161 x D431 mm 26 kg
Maintained! Best buy model from the late 90s. It inherits the traditional diamond actuation circuit, and is characterized by a well-balanced sound with a refined circuit configuration, such as a sense of SN in the mid-high range, and the certainty of the outline in the low range. The exterior has scratches, etc. Serial 608024137 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (input selector, power amplifier direct, reck-out, processor, MM/ MC changeover switch disassembly, polishing grease application, speaker 1/2 tone, ride ness, subsonic switch replacement, output relay replacement, solder repair, protector capacitor replacement, adjustment inspection, operation confirmation)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) phono (MM/MC) switching dimensions W432 x H165 x D450 mm weight 18 kg
Maintained! The mid-range α series uses an α-X balance circuit that blocks the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, the sound separation is good, and it is a classic premain that will keep you entertained regardless of genre. There are line marks and threads on the exterior. Serial 437100950 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, source switch, MM/MC switch disassembly, polishing grease application, power amplifier circuit transistor, adjustment volume replacement, output relay replacement, power supply part solder repair and other main parts solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation)
Accessories: No accessories
Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
Maintained! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 maintenance completed (tone and other switch disassembly polishing grease application (loudness, turnover, subsonic, muting, processor, input selector, power amplifier direct, source direct, tape, reckout switch), output relay, headphone relay replacement, power supply transistor replacement, power amplifier circuit transistor replacement, resistor, adjustment volume replacement, solder repair , interior and exterior inspection and cleaning, bias, DC adjustment, confirmation of each input/output, operation inspection)
Accessories: copy of instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
A long-selling Technica model that includes a shell and cartridge. The sound quality is clear and bright, and it makes popular music in general bouncy. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.5.21 sound output confirmed
Accessories: original box
Main specifications: VM type playback frequency band 20 to 20,000 Hz output voltage 5 mV needle pressure 1.5 to 2.5 g H26 x W36 x D67.5 mm dead weight 19.5 g (including shell)
The price has been drastically reduced. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
Maintained in December 2020! DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. There is discoloration and dullness on both channel bottom plates (Sasaki Shota)
Maintenance information: 2020.12.25 maintenance (6AN8 replacement on one side. Common block capacitor 30/20/20 μF replacement. Replace 1 x 2 film capacitors with 0.1 μF or other oil capacitors. Replace 3 x 2 Mylar capacitors with 390pF. 1 x 2 Vacuum Tube Socket and RCA Jack Caulking Repair (Other rated output: 36 to 55 W at AC 100 to 117 V, measured at SP: 8 Ω, operation check)
Accessories: none
Main specifications: tubular mono power amplifier using vacuum tube 6550/5AR4/6AN8A output 60W/140W W229 x H190 x D229 mm 11.5 kg/unit
1.3 m power cable with clear and wide range sound at an affordable price. If you want to replace the power cable, how about starting with this model? (SASAKI Shota)
Accessories: none
Woofer edge softening treatment! A mid-size dia-tone speaker. The sound image expressed from precise sound construction is carefully created with diamond tones, making classical music elegant and magnificent. Female vocals etc. are also recommended. There are small scratches, scuffs, and broken corners on the net. Serial 19119, 19433 (Fujisawa Yukishi)
Maintenance Information: 2024.5.20 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed frequency band, 35 Hz to 40 kHz, 6 ohms, sound pressure level, 90 dB, W360 x H808 x D325 mm, 29 kg/book
Digital cable 1.0 m RCA plug This 75 ohm digital cable is ideal for generating clocks such as clock generators, word clock connections for receiving devices, S/PDIF connections to DACs, audio interfaces, DJ devices, etc., and video equipment. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original bag
A fully balanced discrete, non-feedback D/A converter using an independent mono mode that is also equipped with a NOS mode. Equipped with 2 ESS ES9038PRO In addition to being compatible with the latest high-resolution sound sources in various PCM and DSD formats via USB input, it also supports coaxial digital input (2 systems) AES/EBU input. You can enjoy more realistic and natural sounds in NOS mode. There are several dot-shaped dents on the front panel. Serial 190730008 (Fujisawa Yukishi)
Maintenance information: 2024.5.20 Operation confirmed (the mounting solder was fixed because the RCA terminal ground cap came off.)
Accessories: instruction manual, power cord, spike
Main specifications: input format (USB) PCM, DSD (DoP v1.1, ASIO) input format (coaxial/AES/EBU) PCM, DSD (DoP v1.1) compatible sampling frequency (USB) maximum 768 kHz (PCM) /maximum 22.6 MHz (DSD) compatible sampling frequency (coaxial/AES/EBU) maximum 192 kHz (PCM) /2.8 MHz (DSD64 DoP v1.1) PCM quantization Number of bits (USB) 24 bit 32 bit PCM number of quantized bits (coaxial/AES/EBU) 16 bit 24 bit USB profile USB 2.0, USB Audio 2.0 digital input USB (Type B) 2 coaxial (SPDIF) AES/EBU analog output XLR1 system RCA1 system analog output level (XLR) 5.6 Vrms analog output level (RCA) 2.8 Vrms frequency characteristics 2 Hz to 120 kHz (+0/-1 dB) S/N ratio 110 dB total harmonic distortion ratio 0.003% analog filter secondary passive power supply voltage AC 100V 50/60 Hz power consumption 40W size W430 x H109 x D379 mm weight 10 kg