The price has been reduced. 2014/7/13 sales price 198,000 yen 2014/7/13 spring has been exchanged! Columbia Grahonora is a gramophone with an orthodox design that doesn't take up much space. It feels like it's in the narrow range and sounds almost only in the mid range, but it has a retro vibe that sounds like it's playing in the background of a black and white movie. The brakes are good, and pitch control is also very sensitive. There are age stains, scratches, and rust on the exterior as a whole. Spring type (Hei Kazuyuki)
Maintenance information: 2014.7.13 Maintained (spring repair operation confirmed)
Accessories: no accessories
Main specifications: W425 x H345 x D478 mm 17 kg
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)
Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki)
Accessories: None
Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
4530BK made by Shinkosha. Since there are many chips and scratches throughout, it is inexpensive. The D130 was mounted. Woofer with MA15 fastener! Powerful bass reproduction far exceeding size is possible with the rear loading horn type enclosure (Sasaki Shota)
Accessories: MA15
Main specifications: screw pitch 420 mm hole diameter 360 mm plate thickness 40 mm front baffle plate thickness 22 mm W600 x H1250 x D600 mm 56.3 kg (all measured)
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
Mount adapter compatible with 35mm diameter speaker stands. This adapter is used when mounting speakers that do not have a hole in the bottom (Tetsuji Oikawa)
Main specifications: load capacity approx. 30 kg, stand mount diameter: 35 mm, base thickness: approx. 8 mm
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. It is an attractive amplifier with a maximum output of 100W during 4-channel operation, and the strength unique to commercial use. There is a feeling of use such as scratches and dullness on the exterior as a whole (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W x 4 (8 Ω continuous output) 100 W x 4 (4 Ω continuous output) 200 W (BTL 8 Ω continuous output) W480 x H88 x D417 mm weight 12.5 kg
The price has been reduced. 2024/2/24 sales price 6,000 yen ※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep test good
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
The disposal price has been reduced! Member prices are not applicable. 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and furthermore, when used in combination with a stabilizer, the warpage of the record board is corrected and appropriate traces can be expected. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
※1 bottle only. TOA large metal radial horn. In terms of sound quality, it has a narrower impression than Altec's sectional horn 311, but it has a bright sound with a sense of overhang unique to radial horns. *The diameter of the mounting hole seems to be slightly smaller than ALTEC, so there is a possibility that ALTEC's 1.5-inch drivers will not fit depending on individual differences. Overall, there are wounds, dullness, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: cross 500 Hz or more, horizontal 90 degrees, vertical 40 degrees, throat diameter 35.5 mm, compatible driver HFD-651, width 720 mm, height 220 mm, depth 580 mm, 10.9 kg
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check)
Accessories: none
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
The price has been reduced! 2023/5/5 sales price 29800 yen*Currently sold. Woofer edge softening treatment. A model developed with an eye on the digital age. The natural spread of sound is suitable not only for vocals, but also for classical music, etc. This is a volume-input high CP model unique to the bubble period. The exterior has a saran net hole, and the emblem is missing on one side and the other side is missing. Also, the veneer is torn. Serial 2609/12502 (Yonejima Satoshi)
Maintenance information: 2024.5.5 maintained (woofer edge softening treatment, good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed, 32 cm for the low range, 10 cm, cone type/2.5 cm for the high range, dome type frequency band 35 Hz to 30 kHz crossover 600 Hz/5 kHz sound pressure level 91 dB impedance 6 Ω dimensions W370 x H680 x D330 mm weight 21 kg/book
The price has been reduced. 2024/5/11 sales price 39,800 yen ADK 4-tier rack. Of course, other rack units can be stacked and used. Depending on the size of the device, you can change the rack to your liking. There is a feeling of use due to appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: 4 hole caps
Main specifications: upper stage and middle height 170 mm, lower stage height 250 mm W574 x H730 x D497 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/5/11 sales price 128,000 yen Maintained! Late QUAD44 with CD input terminal. It's not flashy, but the thick, glossy tone is attractive. In particular, it softens female vocals. Serial Q36114 (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (internal power supply switch contact polishing treatment, balance VOL cleaning ~ check OK. Check the other boards and re-solder the holes. (C, R check OK)
2024.5.9 Internal power supply switch contact polishing treatment
Accessories: power cord
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
The price has been drastically reduced! 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
※ Because it is cheap, it is currently sold. JBL 2-way speaker. It is a large, well-balanced model that is easy to use. It is also recommended as a speaker for BGM in stores, etc. On the exterior, there are stains and adhesive marks on the edges. Also, there are some holes on the sides. Serial 121213353121213 (Yonejima Satoshi)
Maintenance information: 2024.5.19 sweep test good
Accessories: grill net
Main specifications: W152 × H232 × D140 mm 2.5 kg
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using JBL 2420/2440 (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (12 terminal terminal mounting screws, 24 insulating bushings, deterioration replacement, terminal cleaning attenuator, replacement crossover check OK for VR Gari)
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
The price has been reduced. 2024/5/20 sales price 30,000 yen A FOSTEX HA21 throat adapter is set on a self-made horn with a size that imitates the FOSTEX H320. If you've been looking for this size, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: throat diameter 100 mm pitch 4 holes 60 mm 3 holes 50 mm overall W635 x H110 x D 455 mm kg (actual measurement)
Maintained! An eye-catching diamond-tone power amplifier with a rugged design. The extrusion of the mid-range is clear and the sound is slightly firm, but the sound is good, so it seems to go well with jazz and rock. There are small scratches and dents on the exterior as a whole (Mizusaki Ryo)
Maintenance information: 2024.6.1 Maintained (replacement of deteriorated transistors and capacitors in each circuit. Input volume and output relay contact correction. Electric circuit adjustment)
Accessories: copy of instruction manual
Main specifications: 2 mono construction system 100W+100W (8Ω) W425×H170×D285mm 16.5 kg
※It is inexpensive because there are many scratches on the whole. Although it is small, it is an attractive car with a low range and medium to high range with a solid core in the middle. Bi-wire compatible It is compatible with a wide range of genres, and is recommended not only for pure audio but also for surround sound (Ryo Mizusaki)
Maintenance information: 2024.6.1 sweep test is good
Accessories: nothing
Main specifications: Bi-wiring compatible anti-magnetic design impedance 6 ohms playback frequency band 33 Hz to 45 kHz output sound pressure level 88 dB dimensions W194 x H326 x D318 mm weight 8.4 kg
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
Garrard 301 turntable seat. This mat alone changes the sound quality. Try it once! In addition to cracks on the exterior and spindle holes, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
*Although it is a 60 Hz specification, the strobe on the platter is 50 Hz. Maintained! It is a setup that successfully combines the stickiness and guts of the classic Grace arm 545 with few quirks, and the delicate expression with fine grain. It's a car that can be enjoyed regardless of genre. The exterior and flash are not compatible with 50 Hz specifications, and a feeling of use can be seen on the back, such as screw holes, dullness, abrasions, scratches, etc. that seem to be numerous hinge installation marks. Cereal 69774 (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 maintenance completed (motor disassembly/check/lubrication/assembly, motor suspension rubber replacement, suppressor → rebuild replacement, main bearing disassembly/oil filling, oil sealant application, assembly, pulley adjustment, idler cleaning, TT mat replacement, mount rubber washer added, running test OK)
Accessories: sub weight, black weight
Main specifications: GRACE G-545: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) needle pressure variable range 0 to 5 g GARRARD 301: idler drive compatible with 33, 45, 78 rotations W500 x H210 x D403 mm
Maintained! An FM masterpiece arm made in Japan made with a high level of stainless steel and workmanship accuracy. The clear, thick tone that doesn't make you feel incidental sounds is excellent, and the breadth and ease of settings, and the excellent firm and excellent tracing ability in the dynamic balance type are excellent (Oikawa Tetsuji)
Maintenance information: 2024.6.5 Maintained (We will disassemble the arm needle pressure application mechanism part and clean it. The arm lifter skate rubber was replaced due to deterioration. Operation tests with cartridge mounting were also good)
Accessories: phono cable, instruction manual
Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm
Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2024.6.7 sound output confirmed
2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, slip stud installation, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/application of dumping agent, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removes aluminum seals that do not require unit detachment Treatment to prevent idling, re-fix the unfixed coils inside the treatment with silicon ATT contact cleaning. An exchange frequency characteristic measurement check (~ 42 kHz) is performed because the wiring is broken at the base of the resistor, and the original capacitor is continuously used to confirm the input/output waveform and balance for good results, check the sound output)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
Maintained! ※It has been changed to an RCA terminal. Marantz's masterpiece CD player equipped with the Philips swing-arm mechanical CDM-1. The sound is rich, analog-like. It has the same feeling of use as time has passed (Daiki Goto)
Maintenance information: 2024.6.8 maintained (slide motor belt NG → replaced. There is poor thru-hole soldering in the decoder board → all re-soldered. Bypass C NG in other servo boards → replace. ~ CD mechanical turntable motor bearing concave → correction ~ reading check)
Accessories: copy of the manual
Main specifications: Philips swing arm mechanism equipped with CDM-1 14 bit DAC W320 x H90 x D300 mm 7 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer system with a built-in amplifier that uses a dual drive system with a 16 cm woofer unit mounted on both the left and right sides. It is equipped with a switch between Music and Movie, and you can select the playback mode according to the Hi-Fi/Theater genre. You can see a feeling of use on the exterior, holes in the saran net, and dullness, abrasions, etc. all over (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: none
Main specifications: 1 way 2 speakers with built-in amplifier, sealed system, anti-magnetic type, 16 cm cone type x 2, playback frequency range 30 Hz to 200 Hz, high cut filter, variable in the 50 Hz to 200 Hz range, W285xH381xD347mm, 11.5 kg
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: case
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: case
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: none