*Currently sold. BOSE headphones High sound quality around-ear type with high cost performance. If you've been looking for one, go ahead. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Maintained by the manufacturer! Comes with an alternative remote control. Denon's mid-level premain. It is attractive for its ease of use and high cost performance regardless of genre. This model is particularly attractive for its heavy build and low center of gravity noise in the same price range. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 manufacturer maintenance completed (main VR disassembly repair, input switching SW/speaker relay replacement, amplifier board solder correction, various parts inspected, operation confirmed)
Accessories: copy of instruction manual, replacement remote control, power cable
Main specifications: 80W+80W (8Ω) bi-wiring compatible UHC-MOS single push pull W434 x H180 x D478 mm 22.2 kg
A popular headphone system that allows you to enjoy fine, grainy sound. Combined with a tubular condenser headphone driver that firmly brings out the headphone's performance. There is no doubt that you will be completely immersed in the music. There is slight deterioration in the head pad (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: instruction manual, power cord
Main Specifications: SRM-T1S: Frequency Characteristics DC to 44kHz Input RCA x 2 XLR x 1 W195 x H103 x D375 mm Lambda NovaSignature: Electrostatic Type Diaphragm Film Thickness 1.5 Micron Playback Frequency Band 7-41,000 Hz Sensitivity 100dB/100VR.M.S Cord 2.5 m Parallel Wide PC-OCC Weight 472 g (cord included)
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. The exterior is frayed on the cable, and in addition to the black sheath being wrapped around it, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The price has been reduced. 2024/6/17 sales price 128,000 yen It is a transformer that has improved the instantaneous power and power of the reproduced sound by adding improvements to the HI-PC core material with excellent magnetization characteristics, drastically improving internal loss and special impregnation treatment. The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: instruction manual, original box
Main specifications: impedance 1-10Ω load impedance 47kΩ boost ratio 20dB (3Ω/47kΩ/1 kHz) W160 × H73 × D128 mm
The definitive edition of the Orthophone MC transformer. Comes with an MC/MM switcher SW, so you can switch easily. The rounded, warm sound quality is attractive. There is a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: boost ratio 27dB (3Ω, 47kΩ, 1kHz) input impedance 2Ω to 6Ω load impedance > 47KΩ channel balance <0.5dB frequency characteristics 10 to 100 kHz W153 × H95 × D110 mm 1.36 kg
Manufacturer maintained, including pickup replacement! A CD player with a simple design, good cost performance, and easy for beginners. It is equipped with 10 keys that are convenient for station selection. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.13 manufacturer maintenance (loading belt/tray opening/closing SW exchange, laser pickup replacement, inspection of other parts, sound test)
Accessories: none ※remote control missing
Main specifications: 2 analog outputs (variable, fixed), 2 digital outputs (OPTICAL, COAXIAL) W433 x H115 x D288 mm 6.3 kg
It inherits the power supply technology that achieves high speed responsiveness and high signal-to-noise ratio developed with the Technics premium Primain SU-R1000. It's a tuning that you can listen to with peace of mind regardless of genre with responsive low frequency playback with strong speaker driving power. There is also a PHONO input compatible with MM/MC cartridges, and the fact that it is compatible with various sound sources and peripherals from analog to digital is attractive because it has excellent cost performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) phono MM/ MC compatible PC input: back USB B type connector x 1 digital input: optical square terminal x 2, coaxial digital input W430 x H148 x D428 mm 12.7 kg
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Significant sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Tomoho Asaine)
Accessories: none
Main specifications: size 350 x 450 mm height 58 (± 2) mm weight 6.0 kg
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Great sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Jun Tamai)
Accessories: none
Main specifications: size W440 x D490 mm x H58 mm weight 7.0 kg
Comes with original box! This bookshelf speaker has an attractive sense of scale and volume of bass that cannot be achieved with speakers of the same size. The high range also uses a beryllium tweeter, so there is no cloudy sound and the tone is clear and bright. Overall, a model with excellent cost performance. Also, the design is excellent, and there is no doubt that it will look great as an interior decoration. In addition to dullness and small scratches on the exterior, there is a feeling of use such as dents and cracks. Serial B0871037 B0871037 (Hiroki Aso)
Maintenance information: 2024.6.16 sound output confirmed (good sweep test)
Accessories: Saran net jumper plate original box
Main specifications: 18 cm cone woofer 3.1 cm beryllium tweeter playback frequency band 42 Hz to 35,000 Hz impedance 8 ohms output sound pressure level 87 dB external dimensions W260xH390xD430 mm weight 17.2 kg
Genuine Electri While being clear and precise, this is a powerful machine that also has the thickness and intensity of sound of successive Macintosh control amplifiers. It is a famous machine with a deep sense of nostalgia that is compatible with both vintage and modern models. Using the familiar 5-band equalizer, it is also possible to change the desired tone depending on the song. The exterior has blows, line scratches, and repair marks. Serial JHD3514 (Fujisawa Yukishi)
Maintenance information: 2018.8.30 Maintained (main volume, balance volume, etc. Contact cleaning. Switch contact cleaning. Head amplifier section and EQ volume circuit capacitor replacement. Power cord replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: built-in monitor amplifier with 5-band equalizer (20W x 2/8Ω), compatible with balanced input/output, PHONO (MM) compatible, W468 x H183 x D432 mm, 12 kg
The price has been reduced. 2024/6/15 sales price 148,00 yen ※Currently sold. BOSE's high cost performance model for a wide variety of applications. It reproduces sounds unique to BOSE that are powerful and sharp, such as jazz, rock, etc. You can feel the spread of the sound by swapping the position of the tweeter left and right and listening. Overall, there is dirt and a feeling of use. Serial 0179589830119A 017958983030119B (Tomoho Asaine)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, 8 ohms, maximum input 60 W, W380 x H240 x D170 mm, 3.9 kg
RCA line cable 2.0m pair model using plasma (metal compound powder) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
*Model using 1.0 m pair plasma (powder of metallic compounds) shielded with the No. 2 HOT XLR cable. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 303872 (Yonejima Satoshi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 maintenance completed (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
Western Sound Ink boost transformer with Langevin's 408B input transformer casing. It has excellent reproducibility and is suitable for both jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: 198 x 103 x 60 mm 1.1 kg
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 305572 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10002357, 10002357 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Fully maintained! The 38 series is the most popular 38FD. It has a warm tone with a warm tone that has a strong warmth in the bass and mids, and you can enjoy the true essence of lackstone where you can enjoy the afterglow of the tone. There is slight rust on the back. There is a slight distortion in the lever. Serial 1611070 (Kanai Hidetsugu)
Maintenance information: 2024.6.11 maintenance (replacement of some parts and vacuum tubes, confirmation of input/output waveforms, load test (1 kHz sine wave, at 8 ohm load: 28 W+28 W, OK), sound output test.)
Accessories: power cord, instruction manual (copy)
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Digital cable 1.0 m (RCA-BNC terminal) revision B type. A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. On the exterior, oxidation and darkening of the terminals can be seen. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
1.0 m digital cable, BNC terminal revision B type on both ends A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Cotter's most popular MARK2 TYPE L MC boost transformer for low impedance such as orthophones. Using a strong, sealed case and silver wire, the strong and fresh tone is attractive. Perfect compatibility with SPU etc. The transformer itself is different from P/PP/S. RF Enterprise regular import model. ※Silver wire breaks easily, so please handle it carefully (Murakoshi Yoichi)
Main specifications: primary impedance 1 to 6 ohm silver wire triaxial output cable, adopted size W76 x H55 x D150 mm, approx. 1.3 kg
The price has been drastically reduced. 2024/6/14 sales price 428,000 yen Luxman's current phono equalizer using a non-feedback CR type amplifier circuit using all-stage vacuum tubes has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. The condition is generally good. Serial M20700210A (Yamato Yuki)
Maintenance information: 2024.6.13 operation confirmed
Accessories: instruction manual power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
※6 month warranty. This is the DCD-100 thin CD player that is the best match for the DRA-100 network receiver in the DENON design series. Full digital processing is possible by combining it with the DRA-100. Of course, it's attractive enough as a standalone CD player, and it's a high cost performance machine that allows you to listen to smooth sound without habit (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: slot-in CD mechanism 384 kHz/32 bit compatible D/A converter compatible with MP3 and WMA data disc playback size: W280 ✕ H71 ✕ D305 mm 4.2 kg
This is the entry model for NORDOST with a 1.5m pair of RCA cables. The inexpensive yet clear and sharp sound inherits the taste of advanced models. It has creases and a bit of a habit (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: none
Headphone amplifier for electrostatic ear speakers. Sound quality has been improved and wide range has been achieved, such as an all-stage direct connection A class DC amplifier configuration that does not use coupling capacitors, a custom-made 2-axis quadruple volume, and an XLR input terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: power cable
Main specifications: input XLR, RCA with RCA through out frequency characteristics DC to 90kHz rated input level 100mV/100V output W150 x H100 x D360 mm 3 kg
Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. Serial 830693 (Murakoshi Yoichi)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: original box, needle cover, brush
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
*This model uses 1.0 m pair plasma (powder of metallic compounds) shielded by the No. 3 HOT XLR cable. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10005476 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
digital line transformer It has a 1:1.3 times boosting effect, and gives an analog-like thickness, good texture, and a sense of depth. It is recommended for those who want to make the CD sound more analog-like. Please use it by sandwiching it between the amplifier and CD player.
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: W124 x H80 x D170 mm 1.3 kg
DENON analog player. The model is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. It's also a great model for getting started. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: connection cord
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Maple type. Stand for small speakers made of solid Yonematsu. Compatible with most small speakers. The combination of Corian base and wood block material makes it resonate aggressively and accentuates the sense of spaciousness and depth. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 6 spacers
Main specifications: W280 x H615 x D370 mm 6.6 kg
The price has been drastically reduced! 2024/6/11 sales price 35,000 yen with dedicated stand LS-500! Spirit is one of the most popular in the SX-500 series. Like Victor, who continues to preserve the natural sound, it makes acoustic instruments and vocals sound lustrous. There is a feeling of use on the exterior such as scratches and fading (Tamai Jun)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: dedicated stand jumper cable
Main specifications: Sealed bookshelf type Alnico unit, body size dimensions W270 x H455 x D255 mm, 12.5 kg, stand size W294 x H440 x D330 mm, stand weight 6 kg
The price has been reduced! 2024/6/14 sales price 39,800 yen Maintained in 2019/12! An amplifier with excellent cost performance. It sounds great with a well-contoured sound at an affordable price. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior has scuffs on the sides. Serial 7117300736 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
2019.12.8 Maintained (main board soldered, adjustment relay replaced)
Accessories: Remote control instruction manual copy power cable
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz dimensions W434 x H134 x D407 mm weight 14.6 kg
The price has been reduced! 2024/6/10 sales price 45,000 yen with original box! A Fostex subwoofer that was born as a superior model of the CW200A. It makes me feel that the potential is high not only for surround sound, but also for audio. The bass has a core and clear contours, and it firmly supports the foundation. The exterior has small scratches and dullness, and there is a feeling of use such as sunburn on the speaker terminals. Serial 1000852 (Tomoho Asaine)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: instruction manual, saran net power cable, original box
Main specifications: subwoofer with built-in amplifier, 300W, sealed acoustic suspension, simple anti-magnetic type, 4Ω, 90dB, W340 x H360 x D400 mm, 18 kg
Speaker cable, 2.9 m pair, company Y lag/banana plug specification, 8-core structure, LGC copper conductor, 4 types of different diameter wires, has a sense of energy close to advanced models, and has excellent cost performance. Colored tape is wrapped around some sheaths (Kojima Yosuke)
Accessories: none
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see the exterior, mold, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
Comes with an indicator If you're an audiophile, this is a British “static electricity removal pistol” that you definitely want to have. With a mechanism that neutralizes static electricity with positive and negative ions, incidental sounds disappear, and the sound quality of analog records and CDs is improved to a clean sound with good visibility. Can be used approximately 50,000 times without using batteries (Asaine Tomo)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box, indicator
Key Specifications: Static Electricity Removal Accessory for LP/EP
The price has been reduced! 2024/6/8 sales price 19,800 yen ※Currently sold. Denon's 755 series has excellent cost performance. Even in this price range, the sound quality is as bright and thick as Denon. Furthermore, it is equipped with a USB terminal, so it is possible to play back iPods and USB memory devices. You can see a feeling of use on the exterior, such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.6.8 operation confirmed
Accessories: remote control
Main specifications: frequency characteristics 2 Hz to 20 kHz W434 × H107 × D279 mm 4.2 kg
This is a micro boost transformer whose details are unknown. I think it's probably a test machine. I watched it on the DL-103, and the extrusion is subdued and has a natural, gentle tone. It has no habit and is easy to use. There are some minor scratches on the exterior. Felt is attached to the bottom. (FUJISAWA KOSHI)
Maintenance information: 2024.6.7 operation confirmed (boost tested with DL-103)
Accessories: none
Main specifications: W130 x H60 x D100 mm 2.1 kg (actual measurement)
The price has been drastically reduced! 2024/6/7 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
※It is inexpensive because there are many scratches and there are no second-tier metal fittings at all. The horizontal rack can be used for a wide range of purposes, such as for AV on televisions, etc., and for audio. Compatible with a total load capacity of up to 300 kg. There is a feeling of use such as scratches. ※Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: load capacity: top plate 150 kg or less, shelf board 50 kg or less, bottom plate 50 kg or less W1,165 x H492 x D580 mm weight 62 kg
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. There are dirt and stain marks on the exterior (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
MC boost transformer loaded with transformers developed in collaboration with Tamura, for high impedance. Adopts a completely independent structure for the left and right, including the earth system. It matches Denon's DL-103, etc. The exterior has minor paint peeling and bumps. Serial 298 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 10 times W174 x H125 x D121 mm 2.5 kg
Full maintenance was carried out to replace all deteriorated parts such as capacitors and vacuum tubes! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. The exterior has a beautiful finish due to exterior maintenance, but rust etc. on the back remain. Serial 101 20007 (Tomoho Asaine)
Maintenance information: 2024.6.6 maintained (parts replacement, input/output waveform check, load test (1kHz sine wave, 8Ω load: 30W+30W, OK), sound output test) 2020.4.2 maintained (vacuum tube (50CA10), electrolytic capacitor, block electrolytic capacitor, coupling capacitor, vacuum tube socket, headphone jack, micro switch, rectifier diode, semi-fixed resistor, fuse replacement. Complete disassembly of SW/VOL contacts, polish, and apply grease to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 30W+30W), distortion adjustment (maximum output: 0.2%), sound output test)
Accessories: manual copy power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Maintained! Inheriting the technology of the C-2302Vintage, it is a control amplifier with excellent cost performance. It uses a Teflon board, a phono input compatible with 3 positions, and WBT for input/output terminals, etc., making it a structure unique to SANSUI with no gaps in specification materials or circuit configurations. It has a sharp, clear, and powerful sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (INPUT switch, CARTRIDGE switch, MODE switch, other selector switches x 4 disassembly contact polishing. Master volume cleaning. Reinforced power board solder. (General adjustment)
Accessories: copy of the manual
Main specifications: Phonoico built-in control amplifier, MC/MM compatible, 7 input systems, 3 output systems, W460 x H137 x D383 mm, 16.5 kg