1.5m digital XLR cable with no liquid leaks, plasma shielding The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. On the exterior, there is dullness on the terminals. Serial 10007514 (Yonejima Satoshi)
Maintenance information: 2024.6.14 Operation confirmed
Accessories: none
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 1000061118 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 100003931 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/5/26 sales price 348,000 yen The current ELAC speakers have arrived! It firmly follows the merits of ELAC up until now, and shines with a higher degree of perfection than ever before. With an expanse that doesn't make you feel the presence of the speaker, and the sound is delicate and bright, it is a practical speaker regardless of genre. There is a small dent in the lower woofer on one side. Serial 31800E000053/31800E000056 (Takasaki Atsushi)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: instruction manual, jumper, spike holder, original box (cushioning material partially broken)
Main specifications: 2.5-way bass reflex type crossover frequency 450/2400 Hz frequency characteristics 30 to 50,000 Hz efficiency 88 dB recommended amplifier power 40 to 300 W rated input 130 W impedance 4 ohms W229 ✕ H1,000 x D266 mm 19.1 kg
Replacement needle for Victor MD-1050Z, Z5P Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
VICTOR DT-51 and ST-51 compatible needles Unused, unopened Operation has not been confirmed. No warranty, sold as is (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Compatible needle for VICTOR MD-1013Z Unused, operation unconfirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: I think it is 2.5 to 3.5 g.
Victor DT-20 compatible CS-1021 and HMD-1008 compatible replacement needles Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Comes with original box. Good needle tip! An original needle! The final model in Shure's pinnacle V15 series. With the amount of information close to the MC produced by the microridge needle tip, the sound cuts through with the goodness of the grain. Please enjoy jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: original box, instruction manual
Main specifications: mm type output voltage 3.0 mV playback frequency range 10 to 25,000 Hz, proper needle pressure 1.5 to 1.75 g (optimal 1.5 g) dead weight 6.6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.10 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
*The stylus is a SHURE VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
*The stylus is a JICO VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.1 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Yonejima Satoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: No accessories
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
The price has been reduced! 2024/6/7 sales price 39,800 yen For commercial use, it will be sold as is! It is a 2-way, 3-way, and 4-way frequency dividing network with 1 channel switching. The exterior has a feeling of use such as dullness. ※The metal fittings inside the balance terminal are bent. Serial 88L0670 89E2670 (Tomonori Asaine)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: power cable
Main specifications: AC100V 50/60 Hz size 483 x 90 x 378 mm weight 7.4 kg (actual measurement)
Mid-size model of 1.0 m XLO digital XLR cable. A unique cable that is smooth and has a high texture in the mid to high range, yet also has a high sense of sound pressure. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
1.5 m pair of balanced cables ULTRA series OFHC, a unique cable with a natural, smooth tone and a high sense of sound pressure. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
SAEC ceramic shell A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. There is a cloudy part (Daiki Goto)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: No accessories
Main specifications: aluminum alloy with a dead weight of about 8 g
The price has been reduced! 2024/6/1 sales price 118,000 yen A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
A compact A4 size headphone amplifier with built-in D/A converter. The DAC chip is equipped with 2 of the latest Asahi Kasei Electronics' DAC VERITA AK4490, and is compatible with native playback in DSD 11.2 MHz and PCM 384 kHz/32 bit formats! Using a high-precision volume that can be set in 256 steps, it can also be used as a higher quality preamp. The exterior is dull. Serial 1860010 (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: PCM data sampling frequency 32/44.1/48/88.2/96/176.4/192kHz DSD data sampling frequency 2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) USB input sampling frequency 32/44.1/48/88.2/96/176.4/192/352.8/384 KHz W290 × H84.5 × D248.7mm 4.2kg
Line transformer from Uesugi Laboratory. By sandwiching it between the digital device and the amplifier, the characteristic digital noise that causes listening fatigue is removed. You can expect a change in sound quality that is familiar to the ear. It is possible to switch between 3 types of input impedances. There are scratches on the exterior. Serial 057 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: impedance compatible with 3 RCA input systems 200 ohms: 200 ohms 500 ohms: 500 ohms W175 ✕ H150 ✕ D115mm 2.5 kg
MC boost transformer loaded with transformers developed in collaboration with Tamura, for high impedance. Adopts a completely independent structure for the left and right, including the earth system. It matches Denon's DL-103, etc. The exterior has minor paint peeling and bumps. Serial 298 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 10 times W174 x H125 x D121 mm 2.5 kg
The price has been reduced. 2024/6/15 sales price 398,000 yen A parallel push-pull mono power amplifier using EL34. The delicate, clear sound with good visibility is still wesugi! The perfect balance and expressiveness of the warmth and transparency typical of a vacuum tube is attractive. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: none
Main specifications: Parallel push-pull operation rated output 40W (continuous output) output impedance 4Ω, 8Ω, 16Ω playback frequency band 20Hz to 20kHz W435 × H232 × D175 mm 22 kg
Brand new, unopened BOSE TV SPEAKER You can easily improve the sound quality of your TV (Daiki Goto)
Maintenance information: 2024.6.8 operation confirmed
Accessories: original box
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel the changes greatly due to the power cable, and the exterior is dull. ※The wire is hard and the cable is slightly difficult to handle (Satoshi Yonejima)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel the changes greatly due to the power cable, and the exterior is dull. ※The wire is hard and the cable is slightly difficult to handle (Satoshi Yonejima)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
※It is inexpensive because it leaves cracks in the VOL. A headphone amplifier that allows you to enjoy the sound of 2 systems: a vacuum tube and a transistor. It has a built-in USB DAC compatible with 24 bit 96 kHz, and it is a blissful item that allows you to immerse yourself in both digital and analog worlds to your heart's content. Scratches on the transformer area are slightly noticeable. Serial 12060066 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed (sound output OK, gaps remain in VOL)
Accessories: instruction manual, power cord
Main specifications: Vacuum tube using a class single headphone amplifier 6BM8 x 2 vacuum tube output 20Ω to 600Ω (45mW to 135mW) transistor output 12Ω to 300Ω (40mW to 135mW) frequency characteristics 10Hz to 50,000 Hz SNR 89dB power consumption 30W size W190 x H150 x D250 mm mass 4.7 kg
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-39MKIII Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for TRIO and KENWOOD V-36 cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needles for T-30 and V-30 TRIO KENWOOD cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This is a spike specification. There are wrinkles on the exterior like wrap marks. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Balance cable 1.0 m pair XLR cable using a huge network that is synonymous with MIT. The fact that the transparency is clearly increased is a word. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, 3-core blade structure, uses high-purity copper. Although it is a model positioned as an introductory grade, you can enjoy the sense of dynamism and stretch of sound typical of Kimber (Murakoshi Yoichi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Line matching transformer pair sale primary side: 600 Ω CT (150 split) secondary side: 20 kΩ CT (5 k split) W77 x H71 x D43 mm approx. 0.55 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
This is the L-type TH-9708, which is the highest peak step-up transformer along with cotters. The detailed, glossy, and deep sound is the true essence of analog playback. The degree is generally good. Serial 890167 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: primary impedance: LOW 3 ohms size W16.5 x H12 x D10 cm dead weight 2.75 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box