MiniHDMI to HDMI converter cable 5.0 m Details are unknown, but it is a thin, lightweight cable that is easy to handle. The sheath smells like tobacco (Takahashi Nobuyuki)
Maintenance information: 2024.5.4 unchecked
Accessories: none
4.5 m TOSLINK cable The details of the square type - square type are unknown, but it is a type that is easy to handle when it comes to long cables. The sheath smells like tobacco (Takahashi Nobuyuki)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
The HDMI cable is a 3.0 m high-grade connector, and a nylon mesh cable is used for the outer shell. It is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
The price has been reduced. 2023/9/6 sales price 1,000 yen. J1 Project hybrid spike base. Only 1 of the 3-piece set is unopened (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: label
Main specifications: hybrid spike base polymer composite FAR561+ stainless steel saucer diameter 35 mm x height 15 mm maximum load weight 174 kg
※Shipping service. This is a brand new item. Mr. Nagase Muneshige called Nazo Otoko, the host of an audio blog popular among high-end audio users around the country. This book is a compilation of records of 15 years of audio exploration that Mr. Nagase has spelled out on his blog. “Double Woofers,” which was formed in the wake of the JBL 4350, is the origin of its activities, and in addition to high-end amplifiers such as Mark Levinson, Claire, and Goldmund and the JBL 4350, high-end devices coveted by enthusiasts, such as Avalon, Apogee, and Full Epilogue, have appeared one after another. A must-read for high-end audiophiles.
Unspecified head shell. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 11g
Sony die-cast aluminum shell. While it is sturdy, it has a smart design and is easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: die-cast aluminum, 10.5g dead weight
Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. There is a slight screw scratch. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Main specifications: aluminum stamping weight 8.2 g
※It is inexpensive because there are many stains. A classic shell made from machined aluminum blocks. I like the sturdy construction and simple design (Murakoshi Yoichi)
Maintenance information: 2024.5.21 continuity confirmed
Accessories: none
Main specifications: machined aluminum block body weight 13g
Audio-Technica headshell of unknown model number. Simple aluminum press processing. There is a feeling of use such as rust on the finger, small scratches on the main body, peeling paint, etc. (Murakoshi Yoichi)
Maintenance information: 2024.5.7 continuity confirmed
Accessories: none
Main specifications: 8 g dead weight
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
A classic Technics headshell. Aluminum die-cast body with excellent vibration damping properties (Oikawa Tetsuji)
Accessories: screws
Main specifications: Weight 9.2 g
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
SANSUI headshell Model number and details are unknown. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 9g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It has a light weight and is compatible with various cartridges and tone arms (Ryo Mizusaki)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
※Only 1 bottle is currently sold because it is cheap. Bookshelf speakers made in England. It features compact, tight low frequencies and stretchy mid-high frequencies. There are scratches, threads, and the smell of oil (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: 89dB 6Ω W210 × H380 × D220 mm 5.4 kg
Comes with original box! DP-1300M heavy headshell counterweights, set of 2 large and small A must-have item for those using heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. It is recommended for those who use a variety of cartridges. There are some scratches on the exterior (Fujisawa Yukishi)
Accessories: original box
Main specifications: Compatible cartridge weight/for 20 to 28 g (small) /26 to 37 g (large)
DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
It is set directly into the shell to achieve a pattern where records are cleaned at the same time as playing them. There is a feeling of use (Hitoshi Kobayashi)
Accessories: original box, instruction manual
Main specifications: http://www.ebay.com/itm/Vintage-Discwasher-DiscTraker-PRINT-AD-from-1977-/161709875921
SAEC headshell. Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. There is a screw scratch. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: aluminum alloy with a dead weight of about 8 g
A long-selling Technica model that includes a shell and cartridge. The sound quality is clear and bright, and it makes popular music in general bouncy. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.5.21 sound output confirmed
Accessories: original box
Main specifications: VM type playback frequency band 20 to 20,000 Hz output voltage 5 mV needle pressure 1.5 to 2.5 g H26 x W36 x D67.5 mm dead weight 19.5 g (including shell)
Pair tube, 6CA7 compatible ball, made in Russia, measured value 44/44 (rejected value 30) with original box ※The pair is determined based on the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: original box
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is a slight dullness. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 12,800 yen. Ground wire 4.0m American steel vintage ground cable. Sturdy single wire. Depending on the idea, it can also be used for wiring other than ground wires. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
※Set of 2 (not treated as a pair since the internal shape is different between the tubes) KT88 compatible balls, Russian metal brown, base code: 0210/0601 measured value 56/50 (rejection theory 44) with original box ※ measured values indicate GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: original box
An audiocraft headshell that uses a perfect lock pin in addition to its sturdy construction with a hard aluminum molding. It has a degree of perfection that even feels beautiful in form, and the connections are solid, bringing out the full performance of the cartridge. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: Perfect Lock pin, hard aluminum molding, dead weight 13.7 g
The price has been reduced. 2022/7/4 sales price 12,000 yen 2.5mm plug specification for genuine balance cable for IER-Z1R. Shafts have been exchanged with perfect accuracy. If you have an DAP with a 2.5 mm balance terminal such as Astell&Kern, this is for you. (SASAKI Shota)
Maintenance information: 2022.7.4 sound output confirmed
Accessories: none
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
Pair tube KT88 compatible sphere Russian metal brown base measurement value 50/50 (rejection theory 44) there is writing on the base with the blue box ※The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: blue box
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
A popular genuine YAMAHA shell. It is a highly rigid product made of machined aluminum. Recommended for those using the company's GT series (Takahashi Nobuyuki)
Maintenance information: 2024.5.24 continuity confirmed
Accessories: none
Main specifications: machined aluminum, dead weight 13 g (actual measurement)
Pair tube direct heat triode tube made in Russia measured value 72/70 (rejected value 38) with original box (inner cushioning material has deteriorated) *Pairs are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube direct heat triode tube made in Russia measured value 72/72 (rejected value 38) with original box (inner cushioning material has deteriorated) *Pairs are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
LUXMAN MC cartridge demagnetizer is easy to use. Plug in the cartridge shell, press the switch, and the 2 indicators go off, and you're done. *Never use MC cartridges or MM cartridges that use print coils. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box
Main specifications: W120×H44×D56mm 250g
※Since it has a cigarette smell, it is cheap and is sold as is. Elevoy vintage 38cm woofer unit. Although it is for musical instruments, it can also be used for audio without problems. It is energetic and regenerates any sauce with plenty of time (Oikawa Tetsuji)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: none
Main specifications: frequency band 60 to 600 Hz, 8 ohms, diameter 384 x depth, 8.9 kg
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
Popular ceramic shell. A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 continuity confirmed
Accessories: No accessories
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 39,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The dirt, tobacco smell, and feeling of use are conspicuous, so it is currently sold. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
※It smells like air freshener, so it's cheap. Marantz pre-main amplifier with excellent cost performance. The sturdy, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are unique to that time (Yasuhito Koshihama)
Maintenance Information: 2020.4.4 Maintained (Confirmation Symptom: The power does not turn on. Action: Power supply board repair correction. Fixed due to soldering deterioration in the main amplifier circuit and other circuit boards. Remote wire switch disassembly contact polishing. Bad output relay contact replacement. (I/O pin jack polish)
Accessories: none
Main specifications: 20W+20W (when grade A) 100W+100W (when AB grade) W454 x H165 x D380 mm 17.5 kg
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
The price has been reduced! 2024/4/27 sales price 39,800 yen*Inexpensive due to cigarette smell, remote control shortage, etc. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. There are scratches and scratches on the exterior. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)) has been performed. (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data. The condition is generally in good condition. *The included shell cartridge is out of stock. Serial 234198228 (Yamato Yuki)
Maintenance information: 2024.4.8 operation confirmed
Accessories: copy of the instruction manual, EP adapter, USB cable, phono cable (general purpose)
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg