*Heavy weights are being ordered. The classic model of the belt drive and long arm system, with the SME3012R mounted on the TD-521RW. A very silky sound that resonates loudly and unrelated to vibrations, which strikes the heart of the sound quality of a record player. You can enjoy it with a variety of cartridges regardless of whether they are heavy or lightweight. *Since it is TD-521, there is no ESOS (semi-auto stop) mechanism. In addition to fading on the exterior and overall appearance, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: transport lock, instruction manual power cord
Main specifications: [TD521] belt drive type floating suspension mechanism compatible with 33/45/78 rotations [3012R] long arm static balance universal type effective length 307 mm compatible cartridge dead weight 1.5 to 26 g (excluding shell)
Comes with a headphone stand! A popular headphone system that allows you to enjoy fine, grainy tones. Combined with a tubular condenser headphone driver that firmly brings out the headphone's performance. There is no doubt that you will be completely immersed in the music. There is slight deterioration in the head pad (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: instruction manual, power cord
Main Specifications: SRM-T1S: Frequency Characteristics DC to 44kHz Input RCA x 2 XLR x 1 W195 x H103 x D375 mm Lambda NovaSignature: Electrostatic Type Diaphragm Film Thickness 1.5 Micron Playback Frequency Band 7-41,000 Hz Sensitivity 100dB/100VR.M.S Cord 2.5 m Parallel Wide PC-OCC Weight 472 g (cord included)
Audio-technica/W series headphones made of beautiful wood. The housing is made of shaved solid wood from “Hokkaido Asada Sakura,” so you can enjoy a very delicate and warm sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: Sealed dynamic type new wing support, frequency characteristics, 5 Hz to 30 kHz sensitivity, 100 dB/mW, allowable input: 2,000 mW, impedance: 48 ohms, input plug, φ6.3 mm, cable length: 3 m, weight (without cable): 350 g
Comes with original box! late model. By dumping the center of the record board, warping and fine vibrations are suppressed. The main body and 8 sub-weights have a structure where they are held down by rubber that acts as a damper, preventing inherent resonance.
Accessories: original box
Main specifications: brass/chrome finish, external dimensions 68 x 128 mm, 550 g
It is a transformer that has improved the instantaneous power and power of the reproduced sound by adding improvements to the HI-PC core material, which has excellent initial magnetization characteristics, and drastically improved internal loss and special impregnation treatment. The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: instruction manual, original box
Main specifications: impedance 1-10Ω load impedance 47kΩ boost ratio 20dB (3Ω/47kΩ/1 kHz) W160 × H73 × D128 mm
※The current situation is that there is a slight sound leak even when ATT is squeezed out. Audio pro subwoofer If you're thinking about using a subwoofer for the first time, I recommend it! On the exterior, the SP terminal has faded due to sunburn, there is a floating veneer sticker in the lower right corner, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed (sound output OK. (The current situation is that there is a slight sound leak even when ATT is squeezed out)
Accessories: saran net, instruction manual
Main specifications: ACE-bass amplifier built-in bass reflex amplifier output 100W RMS 20cm woofer playback frequency band 27 to 100 Hz W329 x H360 x D365 mm 12.7 kg
It is placed in the corner of the room and plays a role in adjusting the sound field, such as absorbing and diffusing excess bass. The sense of scale has been improved, and it also creates a three-dimensional effect. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: H1520 x radius 250 mm weight 12.50 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
Unspecified speaker stand. It's heavy and well-built. If you're looking for this size, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate W240 x D242 mm W280 x H630 x D340 mm 15 kg (actual measurement)
*Currently sold. Audio-Technica's MM/MC compatible phono equalizer. Although it is affordable, it is well-built and MM/MC compatible. Recommended for modern systems without phono input. In addition to the exterior and cigarette smell, dullness and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: AC power
Main specifications: input impedance mm47kΩ/mc100Ω W44 x H105 x D135 mm approx. 460 g
※ There is no problem with operation, but it is sold as is because it is cheap. Headphone amplifier using vacuum tubes. You can enjoy a clean sound (Oikawa Tetsuji)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: power cable
Main specifications: Vacuum tube used 6N16B W210 x H70 x D330 mm 3.1 kg (actual measurement)
A 3-way speaker system with 075 mounted on our 4320, which was fully restored in 2021. The 4502 original enclosure is serial numbered! The sense of energy that comes close in front of you, and the dynamic, and dynamic sound quality is truly JBL. You can enjoy lots of dynamic sounds. Since 075 is included, the sharpness in the high range is much higher than the 2-way 4320. There is rust on the tweeter, and there are small scratches and dullness on the speaker cabinet (Sasaki Shota)
Maintenance information: 2021.4.20 Maintained (exterior repair/all paint (new other hakama creation/new mechra board created) saran net replacement/frame repair, woofer maintenance (edge replacement/cone paper coating)
Driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, screw replacement, terminal contact cleaning) network maintenance (full panel washing. Terminal rust removal, pickling treatment, cleaning, insulation bush & mounting screw replacement. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: Mechra plate
Main specifications: 3-way unit configuration woofer 2215B driver 2420 horn 2307 tweeter 075 network 3110 3105 frequency characteristics 40 Hz to 15,000 Hz crossover frequency 800 Hz/7,000 Hz W610 x H760 x D510 mm
Tall tower audio rack Made of powder-coated scratch-resistant metal and tempered safety glass made in Italy. It has rounded glass front shelves for a custom made look. It includes a management system to hide power cords and interconnect cables. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: shelf glass plate thickness 6 mm load capacity 23 kg size 635 x 610 x 1,550 mm weight 46 kg
The RCA cable uses a 2.0m pair of 8N conductors, double shielded, and denser insulating materials and compression twists, and the sense of attack creates a realistic weight of sound. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
RCA-XLR conversion cable 5.0 m pair OFC copper wire/OFC copper wire horizontal shield is used for the masterpiece “Negrex 2497” 1-core shield wire/core wire recommended by Mr. Kaneda. The sound quality is flat and well-balanced. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
XLR cable with 1.0m peer-notric terminal, 3-core specification for the popular line cable “8412.” There is a sense of power throughout the entire range, and the warm sound quality with thick mid to low ranges is attractive. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
※The amount of cleaning solution left is very small. stylus cleaner Using an ultrasonic cleaning method, the surface of the stylus is cleaned using a special cleaning liquid “FLUX FLUID” and the vibration of the brush pad. (ASAINE Tomonori)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: instruction manual, rubber foot cleaning solution, original box ※ torn
Main specifications: Power supply/use of 2 x AAA batteries, continuous use time approx. 5 hours, weight: 48 g
Although it has been cleaned, the cigarette smell remains, so it is cheap. Maintained! Marantz's mid-level premain. It is characterized by a sense of transparency and delicate tone typical of Marantz. It is supported by a thin yet sturdy power supply unit, and you can enjoy sound with a sense of stability. The main switch was damaged, and other dirt cannot be removed (Daiki Goto)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: 90W+90W (8Ω) 140W+140W (4Ω) frequency characteristics 5Hz to 100kHz W440 × H123 × D444 mm 18 kg
It has a strong tobacco smell and is inexpensive because it has many scratches and veneer peeling. The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. ※The trolley is not included (Sasaki Shota)
Accessories: nothing
Main specifications: front load horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
Speaker cable is a 2.2 m pair cable with untreated ends from the German manufacturer Einstein. Multi-core 4N copper wire construction. It is a well-balanced sound quality that achieves both thickness and resolution. There are abrasions on the sheath (Kojima Yosuke)
Accessories: none
Yamaha's top CD/SACD player at the time. The D/A section is equipped with ESS Technology's new-generation 32-bit converter, SABRE (Sabre) 32 Reference DAC (ES9018). High quality design with fully balanced transmission at all stages, thorough low impedance, and high rigidity and low resonance construction. It is a model aimed at natural reproduction that reaches straight to the heart of the listener like an instrument. The lettering on the open/close button has become thinner. Serial Y022203WX (Fujisawa Yukishi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: power cord (non-genuine), remote control, spike base
Main specifications: CD/SACD player playable disc CD/SACD/CD-R/CD-RW frequency characteristics 2 Hz to 20 kHz (CD) 2 Hz to 50 kHz (SACD) W435 x H142 x D440 mm 19.2 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance Information: 2024.6.17 Maintained (Transistors and resistors have been replaced. Other adjustments have been made)
2024.4.15 Maintained (1 deteriorated transistor replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. (Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, 2 Remo pins, balance short pins
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
※The power cable is being arranged. I cleaned it, but there is a slight tobacco smell, so it's cheap. A replica model of the famous MC275 released in 2009! It has a wide range and is compatible with recent recording sources. The soft, thick, and natural tone is full of appeal unique to 275. This traditional look is heavy and full of vintage feel. It is also easy to use, such as being equipped with a power switch. On the exterior, some lettering is missing and there are letter misalignment (Sasaki Shota)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: manual, power cable, original box
Main specifications: 75W x 2 (4, 8, 16 ohms) W406 x H178 x D305 mm weight 34 kg
※The power cable is being arranged. I cleaned it, but there is a slight tobacco smell, so it's cheap. A replica model of the famous MC275 released in 2009! It has a wide range and is compatible with recent recording sources. The soft, thick, and natural tone is full of appeal unique to 275. This traditional look is heavy and full of vintage feel. It is also easy to use, such as being equipped with a power switch. On the exterior, some lettering is missing and there are letter misalignment (Sasaki Shota)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: manual, power cable, original box
Main specifications: 75W x 2 (4, 8, 16 ohms) W406 x H178 x D305 mm weight 34 kg
The price has been reduced. 2024/6/17 sales price 198,000 yen It is built in a form that satisfies modern recording requirements, such as a DSD 11.2 MHz USB-DAC, a phono amplifier compatible with MC cartridges, and balanced input. It is a playful preamp with warm sound by NuTube, which was jointly developed by KORG and Ise Electronics, and an audio driver equipped with “S.O.N.I.C. Remastering Technology” produced by Mr. Ono Seigen. There are no major noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: original box, power cable
Main specifications: 2CH compatible format (USB) DSD 2.8224 MHz, 5.6448 MHz, 11.2896 MHz, 1 bit DSD3.072 MHz, 6.144 MHz, 12.288 MHz, 1 bit (only when using S.O.N.I.C. remastering technology) PCM44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz 352.8 kHz 384 kHz , 16 bit, 24 bit audio driver ASIO2.1, WDM, Core Audio (*no guarantee of operation of Windows other than Intel chips) external dimensions W432 x H93 x D282 mm 5.9 kg
Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed.
Accessories: copy of the manual
Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg
※Inexpensive because it has a cigarette smell and dirt. Comes with a self-made stand. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is corroded and dull, and although it has been cleaned, tobacco smell and dirt cannot be removed (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: self-made stand
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
192 kHz 24 bit D/A converter. The sound image has a clear tone, and it is a high performance model that can also be used as a headphone amplifier. There is a dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: power cable only
Main specifications: 2 channel 24-bit 192 kHz compatible D/A conversion input 3 systems (coaxial, XLR, optical) W205 ✕ H45 ✕ D240mm 1.6 kg
*The stylus is made by JICO. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The cantilever is slightly leaning to the left (Sasaki Shota)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: nothing
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
It is inexpensive because it leaves a cigarette smell. A turntable seat with high vibration resistance made of porous ceramic. It is a porous ceramic with 45 micron pores in an alumina crystal, and can be expected to have high vibration resistance (Sasaki Shota)
Accessories: none
Main specifications: 303 mm in diameter, 7 mm in thickness, 1.2 kg in weight
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The price has been reduced. 2024/6/16 sales price 178,000 yen speaker cable 2.5 m pair by wiring terminal Y lug (using WBT0680CU) An extra thick cable using 12 high-frequency high-purity copper conductors with a VaristrandTM structure, 24 for low frequencies. As if the output of a power amplifier has been raised, the momentum of the sound's rise is amazing, and it always makes you feel a sense of power. It is suitable for speakers that are difficult to drive bass, such as the B&W 802 series. There is a crack in the plug shell, part of the polarity ring is missing, and there is a hole (mark like a stab wound) on the sheath (Kojima Yosuke)
Accessories: none
The high-quality textured design of KOJO TECHNOLOGY's “Virtual Earth” top cover with a satin white anodized finish is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in surface area, partial material changes, and S/N improvements, but also improvements in fineness (Sasaki Shota)
Accessories: original box, manual, connection cable
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
115V specification Professional power amplifier made in Germany. Although it is thin, 1U in size, it features crisp, sharp sound quality unique to professional use. It is a character that pushes forward and makes jazz and rock sounds in a stylish way (Sasaki Shota)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: manual
Main specifications: 115V/230V switching type 100W+100W (4Ω) 65W+65W (8Ω) size W483 x H44 x D250 mm weight 7.5 kg
The price has been reduced! 2024/6/16 sales price 698,000 yen piano black color Equipped with a diamond tweeter common to the 800 series, network parts, and an FST mid-range similar to the higher-level models. Although it is the same size as the 804S, the specs have been greatly improved, and it can be said that it is a completely new model. It is a speaker that is delicate, has high resolution, and extremely high sound quality with a sense of SN, has a large enough space to cover everything from high volume to low volume, and can accept all kinds of music. There is a slight feeling of use, and corrosion can be seen on the spikes. Also, there is stickiness due to deterioration of the bass reflex port paint. Serial 0007167/0007168 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: instruction manual, saran net, jumper cable, rubber feet, spikes
Main specifications: 3-way, 4-speaker bass reflex system, 8 ohms, W238 x H1020 x D351 mm, 27 kg
Maintained! Accuphase first generation power amplifier. Unlike today's company's tone, the wild sound with a strong punch is attractive. It goes well with jazz and rock. The exterior has line marks and dullness. Serial L6T748 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (input volume, output relay, semi-fixed VR, etc. replaced due to foot rattling, etc., replacement, etc., switch cleaning card, edge contact cleaning, solder correction, wiring restyling. Bias and offset check output voice check internal cleaning. Note: The MAIN&REMOTE1 speakers are connected in series. (There is no sound unless both speakers are connected)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 150 W/ch frequency characteristics 20 Hz to 20,000 Hz W445 × H152 × D355 mm 25 kg
Cabinet replaced with aurora sound, manufacturer maintained! MM/MC phono equalizer from a handmade amplifier workshop. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J13104 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 manufacturer maintained (LED left and right replacement. Replace it with a new pink color. DC offset readjustment for amplifier section, voltage check for each part. (MUTE SW readjustment, measurement and overhaul of each part.)
Accessories: instruction manual, power cord, connection cord
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Maintained! Trilogue series subwoofers are now in stock! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. The exterior has wrinkles like wrap marks. Serial 30-07-01 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Maintained (power amplifier output elements, etc. replaced. Power board pattern break correction. Auto ON OFF doesn't work → the wiring is different, so it was fixed. Installing protective fuses. Input VR exchange. Operation check. There is no power switch, but when there is an audio signal input, the power is turned on automatically. Also, if there is no sound signal, the power will be turned off within a few minutes. When using only input ① or ②, be sure to stick the short plug into an empty terminal. (Because auto ON/OFF does not work properly), there will be some noise when the power is turned off by unplugging the outlet, so please reduce the input volume on the back. (There is no such noise when the power is turned off automatically)
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Maintained by the manufacturer! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. The exterior is dull and small scratches can be seen. Serial 25633 (Yonejima Satoshi)
Maintenance information: 2024.6.16 manufacturer maintained (16 transistors replaced. Rotation switch/power switch micro SW replacement. Leaf spring SW cleaning, speed adjustment. (Other inspection of each part, operation test)
Accessories: No accessories
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
Maintained! Adjustable 3-way channel divider Crossover frequencies for LOW/MID 4 and MID/HIGH 4 stages can be selected. Furthermore, it is equipped with a FLAT position. It is possible to switch between 200/400/570/800 Hz and 2500/3500/5000/7000 Hz. There are small scratches and corrosion on the exterior. Serial 141628 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (replacement of deteriorated capacitors in the circuit. Power circuit transistor replacement. Switch and volume contacts corrected. I/O pin jack polish (This is a specification because each switch only makes a low sound when FLAT)
Accessories: No accessories
Main specifications: W408 x H134 x D280 mm weight 5.4 kg
Please note that since the CSE power cable is a 2.0m power control terminal for outlet taps, it cannot be used with normal devices. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.16 continuity confirmed
Accessories: original box
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: mounting screws
Main specifications: aluminum stamping dead weight 8g
The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
It inherits the power supply technology that achieves high speed responsiveness and high signal-to-noise ratio developed with the Technics premium Primain SU-R1000. It's a tuning that you can listen to with peace of mind regardless of genre with responsive low frequency playback with strong speaker driving power. There is also a PHONO input compatible with MM/MC cartridges, and the fact that it is compatible with various sound sources and peripherals from analog to digital is attractive because it has excellent cost performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) phono MM/ MC compatible PC input: back USB B type connector x 1 digital input: optical square terminal x 2, coaxial digital input W430 x H148 x D428 mm 12.7 kg
The price has been reduced. 2024/6/16 sales price 378,000 yen A new-generation premain amplifier that integrates the performance of a reference separate amplifier into one housing. All stages are balanced from input to output. The smooth tone in the mid to high range is impressive, and it beautifully reproduces vocals, strings, etc. The bass also has a sufficient sense of volume, and the sense of scale is perfect. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) playback frequency band 5Hz to 50kHz input: PHONO (MM, MC) 1 system, 4 analog systems W440 x H168 x D453 mm 21.5 kg
Comes with original box. Good needle tip! An original needle! The final model in Shure's pinnacle V15 series. With the amount of information close to the MC produced by the microridge needle tip, the sound cuts through with the goodness of the grain. Please enjoy jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: original box, instruction manual
Main specifications: mm type output voltage 3.0 mV playback frequency range 10 to 25,000 Hz, proper needle pressure 1.5 to 1.75 g (optimal 1.5 g) dead weight 6.6 g
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Significant sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Tomoho Asaine)
Accessories: none
Main specifications: size 350 x 450 mm height 58 (± 2) mm weight 6.0 kg
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Great sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Jun Tamai)
Accessories: none
Main specifications: size W440 x D490 mm x H58 mm weight 7.0 kg