※Shipping service. “Fascinating Vacuum Tube Amplifiers: Their History, Design, Production (Volume 1), Reprint Edition” /Over 40 Production Examples/Complete Famous Ball Data/Wireless and Experimental Edition/Supervised by Isamu Asano/1990.4.2 2nd Print Published. The photograph is a sample, so the actual product may be broken, written, etc.
※Shipping service. Original Speaker Design Technique by Tetsuo Nagaoka 2/Table of Contents = Original Speaker Drawing Collection/"Ark” Measured Speaker Unit Data_2/New Edition: Full List of Original Speakers by Tetsuo Nagaoka Issued 1997.10.1 Since the photograph is a sample, the actual product may be broken, written, etc.
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The price has been reduced. 2023/9/27 sales price 45,000 yen*The volume on the remote control cannot be controlled. Maintained! A small gap appears when switching between source direct SW, but this is the current situation. Maintained! A pre-main amplifier that allows you to enjoy tight low frequencies and extended high frequencies. It lets you listen to a performance that is faithful to the sauce and has no unnecessary flavorings, so it is compatible with any genre. The clean design fits well into the room. Serial 201711 (Murakoshi Yoichi)
Maintenance information: 2023.9.26 maintained (replacement VR, speaker relay, MUTING switch, power supply resistance 120Ω replacement, various board dirt cleaning and solder repair, function electric SW, direct SW disassembly contact cleaning, other DC bias DC balance adjustments.)
Accessories: remote control, instruction manual (copy)
Main specifications: 100W+100W (8Ω) line input, 3 tape systems, PHONO (MM/MC), W470 x H170 x D435 mm, 21.3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/25 sales price 19,800 yen ※There is no problem with operation, but it is cheap because there is a lot of rust. LUXMAN's thin synthesizer tuner. The design matches the Luxman Primaine from the 80s, and has a nostalgic, nostalgic atmosphere. The exterior has dullness, small scratches, and rust, and there is a feeling of use, as the power cable has been changed to an external product. Serial G2701694 (Hiroki Aso)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: FM/AM tuner FM tuner part S/N stereo 80dB selectivity NARROW (±300kHz) 80dB
WIDE (±400kHz) 65dB AM tuner part S/N50dB dimensions W453 x H87 x D344 mm weight 4.8 kg
※This is the successor model to the MK2, which uses a unique design that combines several untreated stranded wires at the 4.9m end to form a single wire with only 1 speaker cable. Another feature is that the cable is flexible and easy to handle. There is stickiness and dirt on the sheath due to aging (Tamai Jun)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
※Shipping service. Special Issue No. 134 = Sound System Design in the Super CD & Multi-channel Audio Era, Immortal Analog/Power Basic Course, Detailed Report by Claire MRS (with test tables for each company's subwoofers) /Revell Audio Visit Diary, published on 2000.7.15. Since the photograph is a sample, the actual item may be broken or have markings etc.
The price has been reduced. 2024/3/12 sales price 49,800 yen Maintained! Sony's highest-grade 5-channel vari-controlled FM stereo tuner at the time. Equipped with a FET, the treble extension is excellent, and it also has the thickness unique to varicones. The retro and simple panel design is also attractive. There are dullness, small scratches, etc. appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.12 Maintained (The inside of the main unit was cleaned and the wall escutcheon cleaned. The dial transmission part has been corrected due to thread entanglement on the dial flywheel part. RF section tracking, meter instructions, and MPX detection have been adjusted. (Reworked and corrected due to poor contact (glare) in the output level volume)
Main specifications: FM stereo tuner, reception frequency 76 MHz to 90 MHz, frequency characteristics, 20 Hz to 15 kHz, antenna terminal, 300 ohm balance, 75 ohm unbalance, W400 x H145 x D310 mm, 9.2 kg
Internal and external maintenance completed in April 2023! The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound. There are line scratches and some chips on the exterior. Serial 58110513, 58110531 (Yonejima Satoshi)
Maintenance Information: 2023.4.1 Maintained (enclosure polishing, oil/wax painting. baffle paint. Lattice repair/polishing/painting, lining replacement. Unit maintenance (edge replacement. (Corn paper coating) Unit detachable)
Accessories: saran net
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
The price has been drastically reduced! 2022/5/1 selling price 79,800 yen It is a masterpiece 505J of domestic enclosure. With enough contents and box noise, it is a highly recommended box for those who use JBL. The excellent design unique to vintage is also attractive as an interior. The appearance has damage such as corner chips and abrasions. * The hakama has been removed, and there are no conversion baffles or mechanical plates. (Satoshi Yonejima)
Accessories: lattice net
Main specifications: W475 × H705 × D395 mm approx. 23 kg/book (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
Good level! Caster specification! ADK 4-tier rack. Natural wood and essential aluminum materials are used, and the design is also high. The main body frame and inner plate are prevented from vibrating with special material spacers. (FUJISAWA KOSHI)
Main specifications: 180mm, 180mm, 230mm from the top of the 4-tier rack post, W600 x H775 x D450 mm, approx. 16 kg
Maintained in August 2022! A record jacket-sized masterpiece player that went on sale to commemorate the 10th anniversary of Direct Drive. The cartridge comes with the company's EPS-24CS replacement needle. Not only does it have a compact design and a repeat function, but it also has a mute function for a while after the needle falls, automatically detects the size of the board, and can also be used at an angle or upside down, making it a very convenient gem. Serial DA1629M222 (Takasaki Atsushi)
Maintenance information: 2022.8.30 Maintained (grease up motor bearings, linear tracking drives, tone arms and arm lifters. Replacing deteriorated electrolytic capacitors. The internal lighting was changed to a light bulb color LED. Various SW disassembly contact polishes. Create a driving rubber belt. Phono cable cable creation. Check the turntable rotation speed. Check arm needle pressure. Check the sound output. Simple exterior cleaning, comprehensive operation confirmation inspection.)
Accessories: copy of manual, phono cable, power cable, EPS-24CS
Main specifications: quartz lock direct drive MC head amplifier built-in linear tracking fully automatic player W315 x H88 x D315 mm 6.5 kg
※This item is currently sold. Onkyo enabled speaker. It is a design that makes it possible to construct a Dolby Atmos sound field using sound reflection from the ceiling. Accessories such as brackets and cables are missing (Sasaki Shota)
Maintenance Information: 2023.12.11 Sweep Test Good
Accessories: none
Main specifications: sealed impedance 6 ohms, playback frequency band 90 Hz to 20 kHz, W120 x H155 x D153 mm, 1.2 kg
It is a 3-way center speaker tuned to best match the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/23 sales price 118,000 yen This is a high sound quality studio preamp with feedback on design and development technology for professional consoles and DC power amplifiers. It has a high-grade design, such as an input level equipped with a large machined aluminum knob, monitor level volume, an R core transformer, and a luxurious power supply unit using a large capacity capacitor. There are hit scratches and line scratches overall (Daiki Goto)
Maintenance information: 2023.9.23 Operation confirmed
Accessories: power cable
Main specifications: Input SOURCE INPUT 4 stereo systems (1 of which is balanced input) DECK INPUT stereo 4 systems output MONITOR OUTPUT stereo 2 systems (1 of which is balanced output 2 hot) DECK OUTPUT stereo x 4 W483 x H181 x D44 mm 3.4 kg
The price has been reduced! 2024/4/27 sales price 29,800 yen Krypton speaker stand. It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W249 x H620 x D325 mm top plate W200 x D260 mm weight 7.2 kg/unit
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
I cut the price. 2021/8/30 selling price 49,800 yen rare! Decka's Gramophone Rally is Hi-fidou's first arrival. The turntable is smaller than the board, and the sound has a sense of scale in the UK with a compact body. The atmospheric design, retractable needle case and spring handle are very attractive. Unknown details (Yoichi Murakoshi)
Maintenance information: 2021.8.30 sound confirmed
Accessories: replacement needle
Main specifications: W155 × H280 (350 with the lid open) × D375mm 5.5kg
The price has been reduced! 2024/4/28 sales price 74,800 yen caster specification! Popular quadraspires 19mm pole 4 tier rack. In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is subtly curved and cut so that vibration components gather at the four corners. There are small scratches on the exterior (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: 180 mm, 326 mm, 326 mm from the top of the 4-tier rack post, W600 x H1,005 x D475 mm, approx. 14 kg
※It smells like air freshener, so it's cheap. Marantz pre-main amplifier with excellent cost performance. The sturdy, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are unique to that time (Yasuhito Koshihama)
Maintenance Information: 2020.4.4 Maintained (Confirmation Symptom: The power does not turn on. Action: Power supply board repair correction. Fixed due to soldering deterioration in the main amplifier circuit and other circuit boards. Remote wire switch disassembly contact polishing. Bad output relay contact replacement. (I/O pin jack polish)
Accessories: none
Main specifications: 20W+20W (when grade A) 100W+100W (when AB grade) W454 x H165 x D380 mm 17.5 kg
* Although it can be operated with a remote control, it is inexpensive because it makes abnormal noise when operating the volume, and is currently sold. Entry machine for Marantz primain amplifiers. You can enjoy good sound in a compact size with a smart design and well-balanced sound quality. There are scratches around the volume (Oikawa Tetsuji)
Maintenance information: 2024.4.1 operation confirmed (can be operated with a remote control, but it makes an abnormal noise when operating the volume)
Accessories: remote control, instruction manual
Main specifications: rated output 40W+40W (8Ω) line input/3 systems (CD, TUNER, AUX/DVD), tape input/output/2 systems (RECORDER 2 systems) dimensions W440 x H117 x D341 mm weight 6.6 kg
The price has been reduced. 2014/7/13 sales price 198,000 yen 2014/7/13 spring has been exchanged! Columbia Grahonora is a gramophone with an orthodox design that doesn't take up much space. It feels like it's in the narrow range and sounds almost only in the mid range, but it has a retro vibe that sounds like it's playing in the background of a black and white movie. The brakes are good, and pitch control is also very sensitive. There are age stains, scratches, and rust on the exterior as a whole. Spring type (Hei Kazuyuki)
Maintenance information: 2014.7.13 Maintained (spring repair operation confirmed)
Accessories: no accessories
Main specifications: W425 x H345 x D478 mm 17 kg
The price has been reduced! 2024/4/29 sales price around 298,000 yen is good! Luxman tube power amplifier. Using KT88 as the output stage, it is a powerful yet highly transparent amplifier. It is a vacuum tube amplifier with excellent modern resolution and a sense of speed while being based on classical designs from the past. Serial M20600470A (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 25W+25W (4.8/16Ω) input direct 1 system variable 1 system output 1 system (4, 8, 16 ohm independent) power consumption 150 W 440 x 184 x D230 mm 16.1 kg
The disposal price has been reduced. Member prices are not applicable. 2024/3/7 sales price 128,000 yen Maintained! A crisp, bright, and sharp sound typical of Marantz from the 1970s. Exactly, it's an American sound on the west coast. The design is also a simple design typical of US Marantz. ※The leg is out of stock. The exterior has dullness and small scratches. Serial 4180 (Yonejima Satoshi)
Maintenance information: 2024.3.7 Maintained (single CH power stage transistor replacement. Screwdriver transistor resistor replacement. Drive Tr Capacitor Replacement Contact polishing, aging test)
Accessories: No accessories
Main specifications: 125W+125W (8Ω) W445 × H170 × D265 mm 14.8 kg
The price has been drastically reduced. 2021.6.23 sales price 49,800 yen ※Conductivity has been confirmed, but since the terminal has not been treated and the ground wire is broken, it is currently sold. Exclusive tone arm for DECCA MARK 1/2/3 cartridges. Simple structure using straight pipes. Since the needle pressure is a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain an optimal state for the head of the company (Murakoshi Yoichi)
Maintenance Information: 2021.6.13 Continuity Confirmed
Accessories: armrest
Main specifications: static balance type, total length 303 mm, execution length 225 mm
The price has been drastically reduced! 2024/4/23 sales price 99,800 yen genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The price has been drastically reduced. 2024/4/28 sales price 378,000 yen Macintosh's first hybrid integrated amplifier. The preamp section consists of 12ax7A x 2 and 12AT7 x 2 vacuum tube circuits, and the output stage has a solid-state design with a direct coupled configuration, which combines strength and softness. Compatible with MM cartridges. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: remote control, power cord, original box
Main specifications: 100W+100W (8Ω) Phono (MM) W305 x H194 x D419 mm weight 12.7 kg
※Operation has been confirmed, but since it is cheap, it will be handed over as is. This is a KENWOOD KA series amplifier. It has a compact and clean design, and can be placed horizontally or vertically. The sound quality is as clean as it looks, and it is recommended for those who want to enjoy music in a small space. Serial 61100061 (Sato Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 3 input lines 12W+12W (8Ω) dimensions W171 x H67 x D207 mm weight 2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/29 sales price 99,800 yen Maintenance completed! The design full of oldies is attractive, and Newcam's mono mixer premain for PA. 6L6 is used as the output tube. Channel 1 is compatible with LINE, PHONO, and MIC, and channels 2 to 4 are compatible with microphones. The volume for each channel is around 12 o'clock, and MASTER is used for volume adjustment. There is a feeling of use such as small scratches and paint deterioration appropriate to the exterior model year (Kobayashi Hitoshi)
Maintenance information: 2023.12.12 maintenance (master volume disassembly, cleaning repair, contact repair for each part such as MIC input transformer, etc., left side front lamp off, 12AX7, 150 μF electrolytic capacitor replacement. Vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 41 to 61 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Main specifications: 6L6 push-pull 60W mono LINE, 1 PHONO system each, MIC4 system W440 x H190 x D350 mm 16.5 kg
An integrated SACD player equipped with the VRDS-NEO VMK-3.5-20S with a refined drive circuit design for the drive. The SN is good, and the sound quality is both high resolution and smoothness, so you can fully experience the power of modern audio. It is an excellent product that can also be used as a standalone DAC compatible with a maximum of 24 bits/192 kHz. There is a slight feeling of use such as scuffs on the exterior, the top angle of the main unit, and the back, and small scratches scattered on the remote control. Serial 220007 (Murakoshi Yoichi)
Maintenance information: 2024.4.24 sound output confirmed
Accessories: remote control, power cord, instruction manual
Main specifications: Playable disc SACD, CD, CD-R, CD-RW analog audio output RCA x 1, XLR x 1 digital audio output coaxial digital audio input coaxial, optical, USB-B word sync input format BNC W445 x H162 x D438 mm 31 kg
The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Mizushima Itsuro)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, self-weight 10.6 g
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/23 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/21 sales price 99,800 yen with casters. This is Hayami's horizontal 5-tier audio rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with KP-4CT casters (set of 2)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
The 2 shelves are missing and the dowels are missing and cannot be set. A horizontal AV rack designed with heat dissipation and wiring work in mind. Large TVs can be installed. Up to 6 amplifiers, devices, etc. can be stored. You can see the exterior, overall dullness, large abrasions, etc. (Kobayashi Hitoshi)
Accessories: 2 shelves (no missing dowels in the set)
Main specifications: W1202 x H732 x D582 mm load capacity/overall/top plate/shelf board/bottom plate 300/150/50/150 kg mass 83 kg
※The tweeter is cheap because it has dents. A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals (Murakoshi Yoichi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: spikes, saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, anti-magnetic design, frequency characteristics, 35 Hz to 20 kHz, impedance, 4 ohms, output, sound pressure level, 90 dB, W237 x H1080 x D310 mm, 25 kg/book
The disposal price has been reduced. Member prices are not applicable. 2023/9/13 sales price 2,980,000 yen Maintained with attention to details such as drivers and wiring! The Georgian 4 is attractive for its elaborate horn configuration and beautiful furniture-like design. It is a model with a built-in crispy horn, a structure that creates a unique sound with a rich sense of scale, and the loud sound is truly an American masterpiece, but you can also feel a somewhat English-like sex appeal. *The attenuator has been maintained, but slight chipping occurs when turning due to deterioration of the original winding resistance (Oikawa Tetsuji)
Maintenance information: 2023.9.13 Maintained (828HF disassembly and maintenance: separation from magnetic circuit and diaphragm, magnetic circuit diaphragm maintenance: cleaning of the magnetic circuit, rustproof vibration system, round out, stop noise, T350 disassembly and maintenance: separation from the magnetic circuit and diaphragm, sound pressure difference adjustment: stop noise due to resonance sound generation, elimination of sound pressure drop due to rear sound leakage. Confirm that there are no modifications inside the housing. Remove rust from screws on screw-type terminals, pickle, and polish and clean the receiving side. ATT (x4) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: none
Main specifications: 4-way 15WK, 828HF, T350, X336 (300/3500) approx. W860 x D660 x H1,350 mm approx. 90 kg
Hamilex compact 4-tier rack. The design is simple and you won't get tired of it. The shelves can also be adjusted, making it easy to use. There are bats and scratches on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Top plate load capacity: 100 kg or less Shelf board load capacity 50 kg or less Bottom plate load capacity 100 kg or less Total load capacity 250 kg W591 x H735 x D550 mm Weight 31.5 kg
The price has been reduced. 2024/4/17 sales price 34,800 yen ※Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price. Inside Force Canceller B is out of stock
Maintenance information: 2024.4.13 sound output confirmed
Accessories: phono cable
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
with Ortofon OM-10! Special specification for Pro-ject belt drive player ESSENTIAL 3. A model commemorating the 50th anniversary of the release of The Beatles' masterpiece concept album “Sgt. Pepper's Lonely Hearts Club Band.” The same design as the bass drum on the album jacket can be seen through the acrylic platter. There are many abrasions on the dust cover. Serial 17S059046 (Murakoshi Yoichi)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: power cord, EP adapter
Main Specifications: RPM 33/45 r.p.m. RPM RPM deviation 33 ± 0.70% 45 ± 0.60% WOW Flutter 33 ± 0.21% 45: ± 0.19% S/N Ratio − 66dB Tone Arm Dimensions 8.6 inch (218.5 mm) Overhang 22.0mm Power Consumption 4.5 W Power Adapter 15V/500mA DC Size W (width) 420 mm x H (height) 112 mm x D (depth) ) 330mm weight 5kg
The price has been drastically reduced. 2024/3/31 sales price 29,800 yen ※Currently sold. A model based on the DS-34B with improved sound quality and design. You can listen to a relaxed sound while also having a good cut. The enclosure is very sturdy, and is also equipped with multi-amp connection terminals. There is a feeling of use such as scratches, etc., viscoid sagging under the woofer, and damage to the low negative terminal of the multi. Serial 6676481/6676817 (Takasaki Atsushi)
Maintenance information: 2024.3.30 sound output confirmed
Accessories: saran net
Main specifications: 3 way 3 speaker system, sealed, maximum input, 40 W, playback frequency band, 35 to 20,000 Hz, W420 x H690 x D285 mm, 19 kg
Denon's premium analog player model. The cabinet with a natural wood veneer semi-gloss finish accentuates the beautiful design. It is a stable player that uses a large die-cast aluminum turntable and quartz lock servo. It is also possible to change the cable and aim for an upgrade. Externally, there are bumps and scuffs on the dust cover. Serial 1066302271 (Fujisawa Yukishi)
Maintenance information: 2024.5.2 operation confirmed
Accessories: instruction manual, power cord, connection cord, head shell
Main specifications: Servo-type direct drive system rotation/33/33/45 rpm wow flutter/ 0.1% or less static balance S-shaped pipe arm effective length 244 mm overhang 14 mm needle pressure adjustment range 0 to 4.0 g compatible cartridge 14.0 to 20.0 g (including headshell) W490 x H178 x D400 mm 14.5 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The FOSTEX 20cm double woofer enclosure D-70 is a plywood cutting service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in a stereo magazine at the time by Musico-no-Tomosha, and this is not a genuine assembly kit. There is no difference in dimensions or materials. Wiring, SP terminals, detailed instructions, etc. are not included. If you understand it, if you are a self-made person, how about DIY this summer!? * The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications: Backload enclosure for 20cm double woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight about 93.6 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
*Remote control is out of stock. Maintained! It is a control amplifier that supports digital input in addition to analog input. The simple mechanical design is also good. The sound quality is also attractive, with a relaxed, highly transparent sound typical of Yamaha. There are dullness and dents (Oikawa Tetsuji)
Maintenance information: 2024.4.27 Maintained (disassemble switches such as PHONO selectors, polish contacts and apply contact cleaner. The preamp circuit, power supply circuit, and all other circuit board soldering were corrected. Digital input sound output check OK. (I/O pin jack polish)
Accessories: instruction manual
Main specifications: 8 digital inputs PHONO (MM/MC), 18-bit operation, built-in twin D/A converter, W473 x H130 x D400 mm, 12.2 kg