Compatible with SHARP OPTONICA STY-101 This is a replacement needle for CART-101. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply unit
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
The disposal price has been reduced (member prices are not applicable). 2024/5/15 sales price 298,000 yen Orthophone Japan has been maintained! One owner item! It is a system equipped with the company's WTB-211 tonearm. The sound quality created by the wooden base and heavyweight metal turntable is a player that achieves well-balanced sound quality from low to high frequencies. It is a system that can be used stably without the need for frequency conversion (pulley), and allows you to fully sense not only the MM needle, but also the delicate nuances of the MC needle (Oikawa Tetsuji)
Maintenance information: Maintained by 2024.5.11 Orthophone (bearing replacement, correction process, operation confirmed)
Accessories: power cable, strobe, instruction manual
Main specifications: thread drive speed 45/33 W 470 x H250 x D370 mm 35.5 kg tone arm execution length 229 mm effective length 214 mm overhang 15 mm compatible cartridge weight 18 g to 26 g (shell cartridge included)
SONY ND-ST21 replacement needle Since there is no main unit, it has not been checked, and it is the current situation (Kobayashi Hitoshi)
Accessories: original box
Replacement needle for Sony VX-50G Since there is no main unit, it has not been checked, and it is the current situation (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony XL-250G This is an ND-250G compatible product. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SONY ND-220G compatible replacement needle. Since there is no main unit, it has not been checked (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony XL-20G ND-200G compatible Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VL-14GS (2) ND-14G compatible Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VL-43G (S). This is an ND-143G compatible product. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SONY ND-136G compatible replacement needle Since there is no main unit, it has not been checked (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VM-32G This is an ND-134G compatible needle. Operation has not been confirmed since there is no main unit (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Sony VM-8GS replacement needle ND+-108G compatible Since there is no main unit, it has not been checked, and it is the current situation (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
The dust cover is out of stock, so it's cheap. The mk4 model is a classic Technics analog player. It is a 78-rotation compatible and cable detachable model, which is rare in the 1200 series, and has strong consumer elements. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: copy of instruction manual
Main specifications: Direct drive, quartz control, rotation speed 33, 45, 78 rpm, tone arm, universal S-shaped static balance gimbal suspension system, needle pressure adjustment range 0 g to 4.0 g, W453 x H162 x D360 mm, 12.5 kg
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
Limited edition model commemorating the 50th anniversary of the release of the SL-1200 series. Beige color type. It is a 50th anniversary design that keeps the basic performance of the SL-1200MK7, has a gold tone arm in 7 color variations, and a plate with the “50th Anniversary” inscription and serial number engraved on it. With the main unit switch, 78 rotations and reverse rotation playback are also possible. The dust cover hinges are not original. Serial GM2JA001051 (Tomonori Asaine)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: manual, power cord, phono cable+earth wire, original box, slip mat, dust cover
Main specifications: 33/45 rotations (78 rotations are set with a changeover switch) universal S-shaped tone arm static balance type applicable cartridge mass 5.6 g to 12.0 g/14.3 g to 20.7 g (including headshell) W453 x H169 x D353 mm approx. 9.6 kg
A new standard model for the SL-1200 series, inheriting the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 Operation confirmed.
Accessories: power cord, connection cord, EP adapter, weight sold separately, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
Sapphire replacement needle for Columbia desktop players There is no main unit and operation has not been confirmed (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of aluminum die-cast with high rigidity, and brings out the characteristics of the cartridge (Hiroki Aso)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
A semi-permanent contact conductive agent that made krypton a major. Carbon+Diamond Ultrafine Particles It's about half a bottle in it (Murakoshi Yoichi)
Accessories: package
The power cable uses DIP FORMING oxygen-free copper wire with HSE treatment, which is an advanced burn-in treatment, applied to the 1.8 m conductor. The S/N is extremely high, and the strong sound in the low range is also an extremely attractive, high cost performance model. There is a film defect on part of the sheath (Kojima Yosuke)
Accessories: none
※Only 1 network coil attenuator Orient Hi-B cut core attenuation -1 to -20 dB (1 dB interval) maximum input 300 W usage frequency 200 Hz or more, line diameter 1.2 mm, W85 x H72 x D75 mm, approx. 1.1 kg/piece There is distortion in the washer part (Kojima Yosuke)
Accessories: none
Power transformer used in MQ60 vacuum tube amplifiers Primary: 100V Secondary: 360V/280mA 100V/350mA 60V/70mA CT-6.3 V/2A W104 × H97 x D87 mm approx. 4.3 kg (actual measurement, not including protrusions) (Yosuke Kojima)
※Since there is no manufacturer, it will be handed over as is. PSE standard product. Once the AC power source is converted to DC, a new 60 Hz sine wave is created using the built-in transmitter to generate a clean power source. The output power is 100W. Recommended for use with low power devices such as preamps, CD players, analog players, etc. Comes with an earth polarity switching function. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: original box
Main specifications: output power 100W output frequency 60Hz dimensions W221 x H145 x D415 mm weight 12 kg
Pair tube direct thermal triode made in England measured value 54/50 (rejection value 39) with replacement box The plate shape of the spring fixing part on the top of the head is slightly different on the left and right, and there is discoloration on the plate on one side ※ The pair was determined based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Over 300 deteriorated parts, including 133 transistors and 65 capacitors, have been replaced and maintained! Shell (AT-LH15/OCC) with cartridge (AT-F3/2). A supreme record player made by combining the best of Yamaha's engineering. In addition to adopting a linear tracking system, what is surprising is the amount of material that was put in without hesitation. The total weight of the main body alone is 27 kg, and the turntable made of super duralumin cut from solid wood weighs 5.6 kg. The well-structured low range and the delicate, clean sound that spans the entire range are remarkable. The smooth operation feeling of auto play and multifunctionality such as pitch control are also attractive. There are small scratches and dullness, but it is a beautiful category even when viewed from the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.14 Maintained (replacement of deteriorated parts, re-soldering of each board, board cleaning, volume disassembly cleaning, circuit adjustment of each part, operation check, sound test)
Accessories: power supply unit, screw, shell (AT-LH15/OCC), cartridge (AT-F3/2)
Main specifications: Direct drive system motor 20 pole 15 winding slotless DC motor tone arm/dynamic balance linear tracking arm mounting cartridge dead weight range 4 to 13 g rated power consumption 27 W body/W480 x H154 x D416 mm 27 kg power supply/W124 x H90 x D385 mm 5 kg
※1 bottle only. Woofer for the famous Japanese instrument 2S-305. The Alnico magnet makes a pleasant low frequency. How about for repairs or for a new system? The urethane part is defective due to deterioration. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: No accessories
Main specifications: Alnico magnet, 30 cm, 8 ohms, 20 W, 40 Hz to 1500 Hz, diameter: 313 x depth: 168 mm, weight: 8.5 kg
Maintained! A popular DENON control amplifier for its excellent phono equalizer. MC head amplifiers are famous for their quality, and they fully draw out the amount of information in the cartridge. It's a neat sound typical of a domestic amplifier with clear yet solid mid-range sound. In addition to the exterior, noticeable scuffs on the top plate, scratches on the VOL dial, and stains on the back of the front flap, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.2.16 Maintained (main volume, balance volume internal contact cleaning, cleaning. All input terminals are polished and cleaned, electrolytic capacitor replaced, PHONO2 impedance changeover switch disassembly, contact polishing, cleaning, and grease is applied. (Check the operation of each input/output)
Accessories: instruction manual (copy)
Main specifications: CR equalizer with 3 PHONO inputs MC head amplifier W455 x H132 x D357 mm 10.5 kg
This is a replacement needle compatible with Pioneer MM cartridges HXA-175 and PXT968. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Pioneer PC-291 and PXV-963. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Pioneer MM cartridges PC-20. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Pioneer MM cartridges PC-12. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Power transformer 1st order: 100V 2nd order: 220V-200V-180V-180V-220V/DC190ma, 6.3V-2.5V/3A, 6.3V-2.5V/3A, 6.3V-5V/3A, 5V/3A W102 × H77 × D86 mm approx. 3.2 kg (actual measurement, not including protrusions) There are scratches in places on the cover with the original box (Kojima Yosuke)
Accessories: original box
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 350v-320v-290 v-70v-290 v-320v-350V/DC150mA, 6.3V-2.5V/3A x 2, 6.3V-5V/3A with original box (Kojima Yosuke)
Accessories: original box
Maintained by the manufacturer. The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There are abrasions on the exterior and volume, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (1 PSW rework, 12V relay, function SW replacement. (Amplifier board inspection, solder correction, operation confirmation test)
Accessories: instruction manual, power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible W434 x H180 x D478 mm 22 kg