※ Tweeter soft dome has dents on the rim, so it is inexpensive. Compact Excite series speakers. There is a sense of power in the sound unique to unit development manufacturers, and the sense of scale in the low range in particular is so majestic that the compact size is unbelievably large. As the sound progresses, the transparency of the sound increases, so the fact that you can keep listening is also attractive. There is a slight feeling of use such as small scratches. Serial 03573940/03573941 (Takasaki Atsushi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: saran net
Main specifications: 2-way bass reflex type 180mm woofer 27mm tweeter 4Ω 87dB frequency band 40Hz to 23kHz W205 x H350 x D290 mm 9.0 kg
Maintenance is being carried out in 2022. A reprint of Marantz's famous model 7. In addition to the good graininess of the sound and the glossy and rich sound quality, it brilliantly inherits the good quality of the mid-range. You can enjoy a feeling that transcends ages and genres. The exterior has dullness and scratches. Serial F020306 (Murakoshi Yoichi)
Maintenance information: 2022.3.22 maintenance (implementation of measures to prevent the rear input terminal and chassis earth from floating, hot side loosening, contact pressure correction. Clean each vacuum tube pin and socket contact. (Volume VR part ground wire deviation correction, wood case stop screw installation)
Accessories: instruction manual (copy)
Main specifications: used vacuum tube 12AX7×6 W455×H178×D261mm 8kg
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: case, needle cover, instruction manual
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
Classic speaker selector. It is a convenient car that outputs from 1 input system to 4 systems, or conversely, outputs from 4 input systems to 1 system (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
※The tweeter is cheap because it has dents. A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals (Murakoshi Yoichi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: spikes, saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, anti-magnetic design, frequency characteristics, 35 Hz to 20 kHz, impedance, 4 ohms, output, sound pressure level, 90 dB, W237 x H1080 x D310 mm, 25 kg/book
A convenient speaker selector that allows you to connect 3 sets of speakers to 1 amplifier. Also, it is possible to switch between 3 amplifiers for 1 set of speakers. A simultaneous bipolar switching system has been adopted, and low contact resistance has been achieved by silver plating on the switch contacts and gold plating on the terminals. There is dullness and strong discoloration in the terminal (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: W250 x H60 x D150 mm 1.2 kg
This overhang gauge is convenient for positioning cartridges. The A side can be used for the record needle side slip test, and the B side can calibrate the cartridge part (Murakoshi Yoichi)
Accessories: none
Main specifications: acrylic diameter 295mm, thickness 2mm 154g
※It is inexpensive because there is wobble on one side. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant tonal feel is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration exchange, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration exchange, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
An integrated SACD player equipped with the VRDS-NEO VMK-3.5-20S with a refined drive circuit design for the drive. The SN is good, and the sound quality is both high resolution and smoothness, so you can fully experience the power of modern audio. It is an excellent product that can also be used as a standalone DAC compatible with a maximum of 24 bits/192 kHz. There is a slight feeling of use such as scuffs on the exterior, the top angle of the main unit, and the back, and small scratches scattered on the remote control. Serial 220007 (Murakoshi Yoichi)
Maintenance information: 2024.4.24 sound output confirmed
Accessories: remote control, power cord, instruction manual
Main specifications: Playable disc SACD, CD, CD-R, CD-RW analog audio output RCA x 1, XLR x 1 digital audio output coaxial digital audio input coaxial, optical, USB-B word sync input format BNC W445 x H162 x D438 mm 31 kg
*Since the digital input circuit module cannot be repaired, the digital input cannot be used. Maintained! Kenwood pre-main amplifier. It plays clear, transparent mid-high frequencies and low frequencies with a firm sense of power typical of Kenwood in a well-balanced manner. There is an air cap mark on the top of the front panel. (KOBAYASHI Hitoshi)
Maintenance information: 2024.4.24 Maintained (input board connector correction, switch correction, contact correction, operation confirmation) 2023.5.21 Maintained (display lamp replacement. Switch and volume contact correction. (*The digital circuit module is broken, but the digital input cannot be used because it is not available)
Accessories: none
Main specifications: 150W+150W (8Ω) phonomC/mm mounted damping factor 1000 W 476 x H170 x D424 mm 19.7 kg
Maintained! DENON's vintage pre-main. It has a sense of transparency, three-dimensionality, and sound field that you wouldn't think of an amp from the 70s. Also, be sure to try out the deep and tasteful tuning that you can never enjoy with the company's current models. The cost performance is high! You can see a feeling of use such as appearance, dullness, stains, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.24 maintenance completed (switch disassembly contact polishing, contact cleaner application) 2013.2.19 maintained (54 deteriorated transistors and capacitors replaced/use of nichikon MUSE, etc., RCA terminal replacement, speaker terminal replacement, input/output waveform confirmation, sound output test OK)
Accessories: copy of instruction manual
Main specifications: pre, main separable 32W+32W (8Ω) PHONO2 system (mm) W370 x H141 x D310 mm 8 kg
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
A sound field tuning panel with strong stainless steel ribs with a thickness of 3 mm attached to Cirlogic's wooden tuning panel to give it the ability to contain deep bass. The hollow structure of coniferous plywood and pine wood enhances the transparency of sound quality. There are various ways to use it depending on the installation method, and it is versatile, such as expanding the listening point and enjoying sound quality with a comfortable sound field even in the living room, or absorbing boomy sound quality and enjoying fresh sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: Dimensions W910 x H1300 x D61 mm 26.6 kg (actual measurement)
The price has been reduced. The 2024/4/24 sales price 298,000 yen optional phono card is not installed. In North America, CLASSE is a popular brand along with McIntosh and KRELL. Since it has straight expressiveness and driving ability, it reproduces a rich sense of sound field. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: remote control, power cable
Main specifications: maximum output 100W x 2 (8Ω), 200W x 2 (4Ω) input unbalanced 4 systems, balance 1 system power consumption 260W (rated) W445 x H121 x D419mm 23.0 kg
This is the first DAC model, a masterpiece by CHORD that took the world by storm with its innovative sound. Even if you just check it with the small speakers, you can clearly feel the sound quality. Please enjoy the superb luster of the sound and amount of information. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: Digital input: coaxial (BNC), optical, AES/EBU x 1 system, analog output terminals: unbalanced, balanced x 1 system each, W335 x H65 x D145 mm, actual measurement 4.3 kg
It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 312009 (Kanai Hidetsugu)
Maintenance information: 2024.4.23 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 242699 (Kanai Hidetsugu)
Maintenance information: 2024.4.23 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
MARK LEVINSON JC-2 power supply box produced by Rizaye. Operation has been confirmed. The main unit connection cable is not included. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 Operation confirmed (sound output confirmed on JC-2)
Accessories: power cable
Main specifications: W140 x H83 x D204 mm 1.1 kg
Vacuum tube CD players are rarely in stock. It looks like a product manufactured in Germany and the Netherlands based on the MarantzCD-4000 package, and you can comfortably listen to the mild sound quality unique to tube balls and the gorgeous high frequencies that pop out. This is a great item for those who want an accent to the sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440 x H90 x D270 mm weight 3.82 kg
A dedicated insulator developed for the company's CD player Njoe Tjoeb. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: 50 mm in diameter, 25 mm in height (actual measurement)
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
*Both the main body and ottoman are inexpensive because the leather is torn and leaves a feeling of use. Ottoman with optional swing table Scandinavian design stressless chair. It is the best recliner that reclines naturally by simply putting weight on the backrest, and lifts up the backrest at the same time as the body is raised ※Shipping is estimated separately. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, threads, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W75×H96-106×D75mm ottoman W55×H40×D41mm
This is a rhodium-plated model of the long-selling FI-11 series L-type plug FI-12L series. Adopts a new plating method and a newly developed cable clamp to control stable grip and resonance. Improved sound quality and improved durability have been achieved (Kobayashi Hitoshi)
Accessories: none
Main specifications: L type power plug cable, suitable diameter 9.5 mm to 17.0 mm, dimensions: 42.2 x 55.0 x 66.4 mm
National power plug The exterior, dullness, and feeling of use of the PSE certified medical ground 15A cap can be seen (Kobayashi Hitoshi)
Accessories: none
PSE standard product UL compliant FURUTECH inlet plug is a non-magnetic material design using gold-plated copper screws and stainless steel parts (Kobayashi Hitoshi)
Accessories: none
Unspecified marble board. The top plate and 5 sides have a mirror finish. Use it for amplifiers, CD players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W300 x H30 x D450 mm 10.6 kg (actual measurement)
3P power plug 125V/15A specification. The thickness from the low to medium range is natural, and the unplated brass sound has no habit compared to other plated plugs, so you can use it with peace of mind. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
PSE standard product ACROLINK power plug Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
* Source Direct SW cover is missing and cannot be used, so it is cheap (it is off). Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. Scratches, dullness, stains, and a feeling of use can be seen on the exterior and front edge (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 maintenance completed (select switch disassembly contact polishing grease applied, direct idling adjustment to the side where SD switch tone can be controlled (using repair auxiliary parts) operation tested)
Accessories: copy of instruction manual
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 maintenance (output relay replacement, power amplifier circuit resistance replacement, power supply circuit capacitor replacement, tape selector, etc., switch disassembly, polishing grease application (input selector, power amplifier direct, source direct, reck-out, tone, loudness, muting switch), various volumes, switch cleaning, solder main part repair, pin jack polishing, interior and exterior inspection, cleaning, operation confirm)
Accessories: copy of instruction manual
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
2022/5/18 Maintenance completed. An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2022.5.18 maintenance (1/4 W resistor added, AC cord replacement/side lamp replacement, electrolytic capacitor 100 μF replacement, oil capacitor 0.01 μF replacement, electrolytic capacitor 40 μF replacement, block capacitor 40/20/1000 μF replacement, electrolytic capacitor 1000 μF addition, resistance 1W and 1/2 W replacement, vacuum tube socket and RCA jack caulk repair . Operation has been checked with AC 100 to 117 V.)
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Set of 8 Audio-Technica iron blocks. There is more weight than it looks, and the sound seems to be tight when used under an amplifier or small speaker. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: W30 x H30 x D30 mm weight 136 g
The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Mizushima Itsuro)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, self-weight 10.6 g
Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. The exterior and finger tips are straight, and a feeling of use such as dullness can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 9g
TOWER RECORDS turntable mat set of 3 Usually it comes in a set of 2. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: original bag
USB cable 1.2 m, aiming for a high level of sound quality, the cable structure has a 3-layer shield structure that thoroughly blocks noise and reduces signal loss, uses silver-plated α-OCC as the conductor, and a 24K gold-plated plug for the connector (Mizushima Itsuro)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: none
A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources (Mizushima Itsuro)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Phono cable 0.5m RCA-RCA earth missing The sound quality is thick and powerful, typical of Audiocraft. It has unmistakably neutral properties. You can see the exterior, dullness, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: Continuity confirmed
Accessories: none