Refresh yourself with internal and external maintenance! This is an attractive mid-size model with the large 38cm HPD385 unit pressed into a compact enclosure. It has good phase characteristics, and its highly textured, and moist tone makes classical music and vocals sound pleasant. The exterior has been beautifully finished due to maintenance. Serial 509925 509926 (Hiroki Aso)
Maintenance information: 2024.5.23 Maintained (exterior cleaning/repair/touch-up front baffle coating unit maintenance (edge damping agent coating high range side magnetic circuit rust removal/gap cleaning/center adjustment) ATT cleaning unit detached)
Accessories: saran net
Main specifications: coaxial 2-way speaker front bass reflex system 8Ω 91 dB W540 x H840 x D310 mm 32 kg
Taok's popular 4-tier audio rack. Strong construction typical of TAOC. It tightens the tone of the audio system. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
Main specifications: load capacity 100 kg (per tier) W600 x 720 x D520 mm weight 21 kg
A typical woofer attached to first-class products such as the Exclusive2402 and Westlake Audio. It is a highly stable model that can withstand professional use. The response speed is fast and the sound that makes it stand up well is attractive. The exterior is generally beautiful (Tomonori Asae)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: none
Main specifications: 40cm cone woofer frequency characteristics 28 Hz to 1000 Hz 8 ohms (measured 7.9 ohms) output sound pressure level 97 dB dimensions diameter 400 mm x depth 167 mm 11 kg/1
The price has been reduced! 2024/5/23 sale price 19,800 yen Celestion bookshelf speaker. Using a felt fiber cone for the woofer diaphragm and a titanium diaphragm for the tweeter, the mid-range is slightly glittering. It creates what is called a British sound. The exterior has dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2024.5.23 sound output confirmed
Accessories: saran net
Main specifications: 2-way 2-speaker sealed unit, 15 cm cone type, 2.5 cm dome type for low range, frequency characteristics, 75 Hz to 20 kHz, impedance 8 ohms, size W 185 mm x H310 mm x D 215 mm, weight 4 kg
Fully maintained! The 38 series is the most popular 38FD. It has a warm tone with a warm tone, and there is plenty of warmth in the bass and mids, so you can enjoy the true essence of lackstone where you can enjoy the afterglow of the tone. There is slight rust on the back, but there are no major scratches other than that (Oikawa Tetsuji)
Maintenance information: 2024.5.22 maintained (solder correction, input/output waveform confirmation, load test (1kHz sine wave, at 8Ω load: 27W+27W), sound output test)
2023.12.17 Maintained (oil capacitor, block capacitor, electrolytic capacitor, film capacitor, fixed resistor, rectifier diode, DIN terminal, power supply SW, monitor SW, master VR, balance VR, rear panel VR, VR, rear panel VR replacement, RCA terminal polishing, lever SW disassembly and cleaning and application of grease to prevent oxidation and sulfation, replacement of 2 vacuum tube main parts, 50CA10 replacement, cabinet exterior repair/polishing/oil finish, input/output waveform Check, check for residual noise,
Load test (1 kHz sine wave, 27W+27W at 8 ohm load), sound output test)
Accessories: power cable, instruction manual
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Exclusive audio rack made of wood fiber plywood and metal posts, with casters. The sturdy construction typical of TAOC is attractive. It is a rack where you can aim for stable sound quality without coloring. The effective height is 180 mm for the upper and middle steps and 230 mm for the lower tier. There are wounds, stains, abrasions, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: load capacity 1 stage 100 kg W600 x H835 x D550 mm 27 kg
Set of 4 Quadraspires VENT black poles How about for an addition or replacement? There is some paint peeling on the exterior (Tamura Eiji)
Accessories: none
*The 2-tier rack decoupler spike holder is not included. You can see the attention to design and sound quality at a high level, such as slits that have been carefully thought out for heat dissipation effects and resonance, and solid aluminum pillars. There are some threads and bumps on the exterior (Tamura Eiji)
Accessories: none
Main specifications: W597 x H455 x D475 mm between shelves 326 mm
Luxpremain entry model. You can enjoy solid LUXMAN sound at an affordable price. We recommend combining it with European speakers that are glossy, soft, and have a good tone. The exterior is dull and there are abrasions and small scratches on the top plate. Serial M90410348A (Yonejima Satoshi)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) line input 4 systems (RCA x 4, XLR x 1), 1 phono system (MM), 2 tape systems W467 x H151 x D439 mm 13 kg
This is a double arm cabinet DK-2300 ideal for DP-80 and DP-75. The arm board can be easily removed with screws. One side of the armhole appears to be for the SME3012. Compatible models are unknown on the other side, and there is a 30mm diameter hole. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: insulated 70mm laminated plywood twin arm specification W600 x H101 x D 500 mm weight approx. 15 kg
Unspecified record player cabinet. Unprocessed The double arm is also mountable, and the construction is solid. If you've been looking for one, please take this opportunity. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W602 x H145 x D535 mm 13 kg (actual measurement)
A full-range speaker with a high BOSE interior. 1 bottle only An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Network attenuator pair sale inductance 0-2.7-3.4-3.6-3.9-4.7mH allowable input 400W W105 x H92 x 76 mm 1.9 kg/piece with original box (Kojima Yosuke)
Accessories: original box
Maintenance was carried out, including the replacement of internal deteriorated capacitors! This is Marantz's masterpiece power amplifier model 5, which has not arrived in a long time. Not only is the range unbelievably wide when viewed from the year it was released, but the excellent driving power and glossy tone are truly a masterpiece with a high reputation. There are scratches and paint peeling on the exterior. Serial 1017/1024 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 Maintained (AC cord film deterioration → rewiring procedure. ◎ Common · 1 x 2 inch nuts added for bottom legs (please be careful when opening the back side) · 20 μF or other deterioration replacement and additional 4 x 2 · selenium deterioration → diode addition, BIAS and AC BAL readjustment, vacuum tube socket and RCA jack caulking repair. *Other operation checks have been performed (measured at 30 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: No accessories
Main specifications: mono tube power amplifier output 30W (UL connection) EL34 push pull W152 x H186 x D378 mm 13.4 kg
Maintained! It is the 5th generation of the 907, the top model in the D series that continues to be popular. Brush-ups have been made, such as strengthening the power supply section from the previous game, and the ability to reproduce the low frequency range has been improved. Precision is also added to the wild Sansui sound that feels torque, making it fun to listen to classical music. The exterior has line scratches, threads, and chips in the corners. Serial 605104895 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, subsonic, CD direct, muting, input selector (all), reck-out, phono selector switch disassembly polishing grease application, output relay replacement, protector transistor replacement, power supply unit, constant current diode, resistor exchange, selector lamp replacement, adjustment volume replacement, solder repair, SP selector fixed, master volume, other VR Cleaning, internal inspection cleaning, adjustment inspection, operation confirmation. (*It takes about 15 to 20 seconds for the relay to operate)
Accessories: No accessories
Main specifications: 160W+160W (8Ω) PHONO (MM/MC) compatible W466 x H161 x D431 mm 26 kg
Maintained! Best buy model from the late 90s. It inherits the traditional diamond actuation circuit, and is characterized by a well-balanced sound with a refined circuit configuration, such as a sense of SN in the mid to high range, and the certainty of the outline in the low range. Externally, there are bumps, etc. Serial 608024137 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (input selector, power amplifier direct, reck-out, processor, MM/MC changeover switch disassembly, polishing grease application, speaker 1/2 tone, ride ness, subsonic switch replacement, output relay replacement, solder repair, protector capacitor replacement, adjustment inspection, operation confirmation)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) phono (MM/MC) switching dimensions W432 x H165 x D450 mm weight 18 kg
Maintained! The mid-size α series uses an α-X balance circuit that prevents the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, the sound separation is good, and it is a classic premain that will keep you entertained regardless of genre. There are line marks and threads on the exterior. Serial 437100950 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, source switch, MM/MC switch disassembly, polishing grease application, power amplifier circuit transistor, adjustment volume replacement, output relay replacement, power supply part solder repair. Solder repair for other main parts, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation)
Accessories: No accessories
Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
Maintained. 300B single amplifier using all Tamura transformers. It is a configuration that firmly holds the basics of a single amplifier using a rectifier tube. Furthermore, you can use it safely with 300B DC ignition with a regulator (Oikawa Tetsuji)
Maintenance information: 2024.5.21 maintained (2 main volume gang error replacements, CV378/GZ37 deterioration replacement, RCA jack and vacuum tube socket caulking repair*Other operation checked with AC100V (rated output measured at 8W SP: 8Ω))
Accessories: none
Main specifications: used vacuum tube 300B 6SL7/GZ37/5U4G/5X4G output 7W x 2 W430 x D215 x H210 mm 19 kg
Maintained! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 maintenance completed (tone and other switch disassembly polishing grease application (loudness, turnover, subsonic, muting, processor, input selector, power amplifier direct, source direct, tape, reckout switch), output relay, headphone relay replacement, power supply transistor replacement, power amplifier circuit transistor replacement, resistor, adjustment volume replacement, solder repair , interior and exterior inspection and cleaning, bias, DC adjustment, confirmation of each input/output, operation inspection)
Accessories: copy of instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
A long-selling Technica model that includes a shell and cartridge. The sound quality is clear and bright, and it makes popular music in general bouncy. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.5.21 sound output confirmed
Accessories: original box
Main specifications: VM type playback frequency band 20 to 20,000 Hz output voltage 5 mV needle pressure 1.5 to 2.5 g H26 x W36 x D67.5 mm dead weight 19.5 g (including shell)
A popular model that won the Good Design Award. Equipped with Onkyo's unique digital amplifier technology “VL Digital” circuit. The thin yet high power, and the smooth sound is attractive even though it is a digital amplifier. The slim housing allows you to enjoy it anywhere. Dullness over time, there are small scars (Sasaki Shota)
Maintenance information: 2024.5.20 Maintained (main volume contact correction. (I/O board signal line correction repair)
Accessories: remote control, manual, power cable
Main specifications: 100W+100W phono MM pre-out/power-in terminals W435 x H82 x D390 mm 11.3 kg
Maintained in December 2020! DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. There is discoloration and dullness on both channel bottom plates (Sasaki Shota)
Maintenance information: 2020.12.25 maintenance (6AN8 replacement on one side. Common block capacitor 30/20/20 μF replacement. Replace 1 x 2 film capacitors with 0.1 μF or other oil capacitors. Replace 3 x 2 Mylar capacitors with 390pF. 1 x 2 Vacuum Tube Socket and RCA Jack Caulking Repair (Other rated output: 36 to 55 W at AC 100 to 117 V, measured at SP: 8 Ω, operation check)
Accessories: none
Main specifications: tubular mono power amplifier using vacuum tube 6550/5AR4/6AN8A output 60W/140W W229 x H190 x D229 mm 11.5 kg/unit
Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
Brand new and unused item (opened for photography) A slide base that allows you to use an orthophone's RMG/RMA etc. arm by using it in a hole for the SME 3009 or 3012. The shaft diameter is 20mm (Oikawa Tetsuji)
Accessories: screws, tools
Speaker cable 1.9 m pair end unprocessed double 4-core spiral hyperlitz speaker cable conductor is a blend of PSC plus & LGC. It is an excellent model that combines realism with thickness not found in recent audio quests (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Speaker cable is a basic cable composed of 4 single-wire conductors with 2.6 m pairs of untreated ends. It has a straight, extruded, and pleasant sound. There is dirt on the sheath on the exterior (Ryo Mizusaki)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
※Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.7 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product that can transmit pure signals. The balance is an indescribable cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
1.3 m power cable with clear and wide range sound at an affordable price. If you want to replace the power cable, how about starting with this model? (SASAKI Shota)
Accessories: none
The 1.0 m XLR terminal of the digital cable uses 7N copper for both 110Ω AES/EBU core wire and shielded braided wire. Connectors are manufactured by Neutrik (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
The 1.0 m XLR terminal of the digital cable uses 7N copper for both 110Ω AES/EBU core wire and shielded braided wire. Connectors are manufactured by Neutrik (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, LC-OFC class 1 conductor, is a long-selling product capable of pure signal transmission that has been produced for over 10 years. The balance is a flat, tight bass, and an indescribable cable with a smooth high-frequency luster. There is friction on the sheath, dirt, and deterioration on the plug (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, LC-OFC class 1 conductor, is a long-selling product capable of pure signal transmission that has been produced for over 10 years. The balance is a flat, tight bass, and an indescribable cable with a smooth high-frequency luster. There is friction on the sheath, dirt, and deterioration on the plug (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
※Since only 1 bottle is on the R side, it is inexpensive. The 1.0m RCA cable has a calming sound and a unique thick air feel. WBT plug with WBT-0144 As for the exterior, the LR coloring on the plug has deteriorated and there are cracks (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Phono cable, 1.25m, RCA-RCA type, record a wild and powerful sound! The sense of scale is conveyed in classical music, and the heat of the sound field is conveyed in jazz. The exterior is dull on the plug,
There is dirt on the sheath (Kojima Yosuke)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Woofer edge softening treatment! A mid-size dia-tone speaker. The sound image expressed from precise sound construction is carefully created with diamond tones, making classical music elegant and magnificent. Female vocals etc. are also recommended. There are small scratches, scuffs, and broken corners on the net. Serial 19119, 19433 (Fujisawa Yukishi)
Maintenance Information: 2024.5.20 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed frequency band, 35 Hz to 40 kHz, 6 ohms, sound pressure level, 90 dB, W360 x H808 x D325 mm, 29 kg/book
It is a 75 ohm coaxial cable with 0.7 m RCA terminals and a double shielded “cordel structure” that minimizes dielectric loss. The exterior is dull, part 1 characters are missing, etc. (Fujisawa Yukishi)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original bag
Digital cable 1.0 m RCA plug This 75 ohm digital cable is ideal for generating clocks such as clock generators, word clock connections for receiving devices, S/PDIF connections to DACs, audio interfaces, DJ devices, etc., and video equipment. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original bag
A fully balanced discrete, non-feedback D/A converter using an independent mono mode that is also equipped with a NOS mode. Equipped with 2 ESS ES9038PRO In addition to being compatible with the latest high-resolution sound sources in various PCM and DSD formats via USB input, it also supports coaxial digital input (2 systems) AES/EBU input. You can enjoy more realistic and natural sounds in NOS mode. There are several dot-shaped dents on the front panel. Serial 190730008 (Fujisawa Yukishi)
Maintenance information: 2024.5.20 Operation confirmed (the mounting solder was fixed because the RCA terminal ground cap came off.)
Accessories: instruction manual, power cord, spike
Main specifications: input format (USB) PCM, DSD (DoP v1.1, ASIO) input format (coaxial/AES/EBU) PCM, DSD (DoP v1.1) compatible sampling frequency (USB) maximum 768 kHz (PCM) /maximum 22.6 MHz (DSD) compatible sampling frequency (coaxial/AES/EBU) maximum 192 kHz (PCM) /2.8 MHz (DSD64 DoP v1.1) PCM quantization Number of bits (USB) 24 bit 32 bit PCM number of quantized bits (coaxial/AES/EBU) 16 bit 24 bit USB profile USB 2.0, USB Audio 2.0 digital input USB (Type B) 2 coaxial (SPDIF) AES/EBU analog output XLR1 system RCA1 system analog output level (XLR) 5.6 Vrms analog output level (RCA) 2.8 Vrms frequency characteristics 2 Hz to 120 kHz (+0/-1 dB) S/N ratio 110 dB total harmonic distortion ratio 0.003% analog filter secondary passive power supply voltage AC 100V 50/60 Hz power consumption 40W size W430 x H109 x D379 mm weight 10 kg
The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, transport lock pin
Main specifications: analog output, RCA1 system, digital output, 2 coaxial systems, W458 x H110 x D369 mm, 11 kg
Accuphase F-5/F-15 crossover frequency 12500 Hz board. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: crossover frequency 12500 Hz attenuation characteristics 12 dB/oct・-18 dB/oct switchable
Frequency board for Accuphase channel divider F-5/F-15 The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching
Uses a 0.5 m pair PCOCC RCA cable. You can see a feeling of use on the exterior, dullness, dirt, threads, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Continuity confirmed
Accessories: none
Phono cable is a 1.2m RCA-RCA terminal line cable with a phono ground pin. There is a feeling of use on the exterior, threads on the shield, dullness of the plug, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Continuity confirmed
Accessories: none
500Hz/2 way board included. Accuphase 2-way/3-way channel divider. You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cable, CB500, CB-2WAY
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. An easy-to-use tuner equipped with 20-station random memory and an auto tuning function. The sound is clear and easy to hear. *TV broadcasting is compatible, but TV reception is not possible because it is a model prior to digital terrestrial broadcasting. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440×H78×D331 mm 4.1 kg
*Currently sold. There is poor contact with the balance, and there is a sound leak in the shaken part, which is the current situation. First generation of the best-selling 390 series. The compact body is equipped with a large toroidal transformer, and the sound quality is well-balanced and has a firm core at an affordable price. Recommended for those starting out with audio or those looking for a sub unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmation (input/output possible, BAL contact is faulty)
Accessories: instruction manual
Main specifications: 60W+60W speaker output 2 systems line input 5 systems with PHONO (MM/MC) W434 x H120 x D279 mm 5.8 kg