*Currently sold. Taket's super tweeter with a playback capacity of 150 kHz or more. The slide switch for switching the crossover was removed from the original BATPRO, fixed to the A position, and the terminals were changed. Efficiency can be switched between 5 levels with the rotary switch, and natural harmonics are produced (Yamato Yuki)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: original box instruction manual
Main specifications: maximum rated 35 V impedance 8 ohms playback frequency band 18 kHz to 150 kHz W125 x H90 x D100 mm approx. 260 g
An improved version of the BC-1 standard monitor broadcast by the British BBC, a model that plays British sound attractively. The brilliance and elegant expression of the classical sound source strings and vocal music are workmanship that can be said to be the prototype of the beautiful sound of European models. The internet has changed, and the emblem is out of stock. The exterior is serial 6353 and 635 (Fujisawa Yukishi)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: Saran net (non-genuine)
Main specifications: 3-way bass reflex type 8Ω 50W W305 x H635 x D298 mm 14 kg
Maintained! A famous and famous first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. There are line scratches and scuff marks on the exterior. Serial J3Y212 (Tamura Eiji)
Maintenance information: 2024.9.20 Maintained (the DISC1 signal line has an input volume, impedance changeover switch, and input selector switch, and input selector switch have different signal paths from DISC2, so the input volume was exchanged. Impedance switching, input selector cleaned again) 2024.7.27 Maintained (since the HIGH FILTER/LOW FILTER switch cannot be removed, the mounting part was remodeled and replaced. The gap is gone, but there is some switching noise when switching (both HIGE and LOW). (Overall switches are re-cleaned and comprehensively adjusted)
2022.12.25 Maintained (28 film capacitors and 60 transistors in each board were replaced. DISC LEVEL CONTROL CLEANING Other switch and volume cleaning.)
Accessories: copy of instruction manual, power cable
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
Maintained! A high performance power amplifier that uses Orex's specialty lambda capacitors. Pure Class A operation and Class AB operation can be selected by switching the switch. The strong construction is directly linked to sound quality, making the sound quality fresh and sharp. There are scratches and scratches on the exterior. ※The power cable has been changed to a 3P inlet. (FUJISAWA KOSHI)
Maintenance information: 2024.9.19 Maintained (The bias changeover relay was replaced due to poor contact. The protection relay was replaced, and 4 electrolytic capacitors were replaced. The operation switch disassembly contacts have been cleaned. Adring current and offset voltage were checked. The interior has been cleaned. I checked the input/output.)
Accessories: power cord
Main specifications: Rated output: A grade 50W+50W (8Ω) AB grade 200W+200W (8Ω) playback frequency band 5Hz to 100kHz speaker impedance 4Ω to 16Ω external dimensions W450 x H172 x D473 mm weight 30 kg
Speaker cable, 2.0m pair, EQS3++, single wire specification, spade terminals on both ends, Glen optimized silver conductor+polymer coating, 2 cores, perfectly symmetrical, coaxial structure, and features a three-dimensional, high-contrast expression. The plug changes color, rubs against the bifurcated tube part, and there is dirt (Kojima Yosuke)
Accessories: none
John Carl's slim-design “flat preamp” is the first control amplifier equipped with an original module developed in-house. Thorough simplification and a straight, coined tone with carefully selected high quality parts are the model that became the basis for later Mark Levinson preamps. The exterior has threads, dullness, etc. Serial 1306 (Yonejima Satoshi)
Maintenance information: 2013.11.28 Maintained (the left and right internal transistors of the line module will be replaced, adjusted and re-encapsulated. Since the internal module of the power supply unit is defective, the power supply was manufactured with the case as it is. Inspection of each operation, re-encapsulation of semiconductor exchange adjustments inside the LCH phono module. Since the filter module is flat, the internal capacitor was replaced and resealed. (Gain changeover switch replacement due to poor contact, contact cleaning of other switches, inspection of specifications, inspection of each operation)
Accessories: power cord connection cord
Main specifications: 5 module phono (MM) compatible RCA input/output body size W482 x H60 x D195 mm (actual measurement) 4.2 kg (actual measurement)
Set of 4 Wood cube setting base made of the hardest African ebony in the world. You can expect significant sound quality improvements. When in use, the sound differs depending on the direction of the wood grain, and when setting, the direction of the wood grain is changed and adjusted so that the sound is the best before use. You can see a feeling of use on the exterior, tape marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: African ebony wood load capacity 50 kg (4 pieces) W34 x D34 x H34 mm approx. 48 g/piece
Set of 4 Wood cube setting base made of the hardest African ebony in the world. You can expect significant sound quality improvements. When in use, the sound differs depending on the direction of the wood grain, and when setting, the direction of the wood grain is changed and adjusted so that the sound is the best before use. In addition to the exterior, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: African ebony wood load capacity 50 kg (4 pieces) W34 x D34 x H34 mm approx. 48 g/piece
Good stylus and cantilever! A masterpiece cartridge from Bach's 250th anniversary series. B model with the Contrapunkt A changed to ruby cantilever specifications. Some of the lettering on the side has disappeared. (FUJISAWA KOSHI)
Maintenance information: 2024.9.16 Operation confirmed
Accessories: needle cover ※ mounting screws not included
Main specifications: MC type cantilever material solid ruby oval needle power generation coil 6N pure silver wire output voltage 0.47mV internal resistance 5Ω diamond needle suitable needle pressure 2.5 g dead weight 10 g
Comes with original box! This is an optical cartridge entry-model DS-E1+ exclusive equalizer set. The mechanism captures the movement of the needle as a change in light and outputs it, and reproduces sound quality with excellent separation and high resolution. Serial 263, 002142 (Fujisawa Yukishi)
Maintenance information: 2024.9.16 Operation confirmed
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: DS-E1: aluminum cantilever machined aluminum body output voltage 500 mV or more needle pressure 1.6 g to 1.8 g weight 8.1 g DS-E1 EQ: rated output voltage 500 mV output impedance 120 ohms W200 x D160 x H70 mm weight 1.4 kg
The price has been reduced! 2024/9/13 sales price 258,000 yen Maintained! The top Macintosh model in the golden age. You can enjoy the thick and bold Macintosh sound. Comes with an easy to handle 5-band equalizer It is an easy-to-use preamp that can be combined with speakers and power amplifiers of a wide range of ages. There is a slight feeling of use such as scratches on the top plate. Serial AY3749 (Fujisawa Yukishi)
Maintenance information: 2024.6.5 maintenance (TR in EX Pander board, Tr replacement in headphone board, operation check, connector caulking cleaning, solder processing) 2022.9.29 maintained (contacts cleaned due to poor switch and volume contact. The flat cable was replaced due to poor deterioration. The electrolytic capacitor has been replaced. The panel lamp has been replaced. (The power supply circuit tap has been changed to 100V specification.)
Accessories: copy of instruction manual
Main specifications: input terminals Phono 1, 2, AUX, tuner, tape 1, 2, 3 output terminals PRE OUT1, 2, TAPE OUT1, 2, W406 x H138 x D330 mm 11.8 kg
The price has been drastically reduced! 2024/9/12 sales price 298,000 yen This is a special version with the new material changed to a cyanide ester printed circuit board and the main internal parts have been renewed. The deep sound, which has both transparency and suppleness while having a sense of sharpness and speed, makes the music fully enjoyable is attractive. The range and sound field are wide, and you can enjoy classical music with sufficient quality. On the exterior, there is rust on the metal fittings. Serial 4524 (Fujisawa Yukishi)
Maintenance Information: 2024.9.12 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: input imbalance (RCA) 4 system balance (XLR) 2 system output balance (XLR) 1 system unbalance (RCA) 1 system W400 x H98 x D364 mm 16 kg
The price has been drastically reduced! 2024/9/11 sales price 178,000 yen New power supply unit created! All deteriorated capacitors, etc. have been replaced. MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive. The exterior is dull. Serial 0585 (Yonejima Satoshi)
Maintenance information: 2024.9.11 Maintained (new power supply manufactured, all deteriorated electrolytic capacitors and tantalum capacitors replaced, gain changeover switch replaced due to poor contact, replacement due to poor pin jack contact, readjusted each gain, specification inspection, sound output inspection (there are no current problems with the module))
Accessories: No accessories
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
Maintained. This is Altech's 2-way, 800Hz crossover network. Equipped with an attenuator. Please use this when you want to change A5 or A7 to 800Hz. The exterior has small scratches, dullness, etc. and a feeling of use (Satoshi Yonejima)
Maintenance information: 2024.9.10 Maintained (attenuator VR disassembly contact cleaning. (Crossover check OK)
Accessories: No accessories
Main specifications: allowable input 100W input impedance 8Ω attenuator 1dB to 10dB crossover frequency 800Hz dimensions W122 x H140 x D143 mm weight 1.6 kg
Maintained. This is Altech's 2-way, 800Hz crossover network. Equipped with an attenuator. Please use this when you want to change A5 or A7 to 800Hz. Dullness over time and small scars (Oikawa Tetsuji)
Maintenance Information: 2024.9.10 Maintained
Accessories: none
Main specifications: allowable input 100W input impedance 8Ω attenuator 1dB to 10dB crossover frequency 800Hz dimensions W122 x H140 x D143 mm weight 1.6 kg
The disposal price has been reduced. Member prices are not applicable. 2024/9/10 sales price 128,000 yen ※60 Hz specification. SME 3009S2IMP tonearm set! A floating turntable with a surprisingly simple structure. The characteristic sound of a belt drive and the sharp, clear tone with a knife edge are attractive. The entire cabinet is scratched and dull. (SASAKI Shota)
Maintenance information: 2024.8.16 Operation confirmed
Accessories: belt
Main specifications: 60 Hz specification belt drive 33/45 rotation (changed by changing belts) 3009S2imp: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g W460 x H179 x D387 mm weight 8.2 kg
Maintained by the manufacturer! New dust cover created, cartridge (SHURE M44G) included. DENON record player DP-57L equipped with auto lift up and stop function. It looks elegant, and the arm can be operated up and down with the touch of a button, so I recommend this one to those who are thinking about starting a record. Straight arms only. Cabinet veneer peeling repair marks, slight swelling (Sasaki Shota)
Maintenance information: 2024.9.8 manufacturer maintained (arm dismantling and cleaning. Motor drive board repair. Arm position sensor replacement. Sound output, operation test)
Accessories: copy of the manual
Main specifications: Direct drive 33/45 rotation compatible tone arm part (static balance, electronic control) arm pipe interchangeable type W485 x H185 x D410 mm approx. 11.5 kg
Maintained by the manufacturer! Marantz's premain amplifier with an attractive, thin, and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers are also a good match, so you can choose any music genre. There is dullness and small scratches (Goto
Daiki)
Maintenance information: 2024.9.7 Marantz maintained (MM/MC changeover SW disassembly cleaning. Each push SW disassembly and cleaning. SP relay replacement. idling adjustment. Soldering fixes for each board. Each part was inspected and operation tested.)
Accessories: remote control, power cable
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/9/7 sales price 128,000 yen, 38 transistors, volume exchange, etc. Maintenance has been carried out with attention to detail! The crisp, dry, and powerful sound, which also has a sense of dynamism, is amazing. The crispness is excellent. It is recommended for listening to jazz, rock, etc., and is also suitable for playing records. You can see a feeling of use, such as external abrasions, marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.7 maintenance completed (master volume replacement, balance volume replacement, switch disassembly and polishing grease application (tone, subsonic, loudness, input selector, copy, tape, coupler), power amplifier, tone circuit transistor replacement, internal inspection and cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 70W+70W, 2 line inputs, 2 phono inputs (MM/MC), 2 tape systems, pre/power separable, W430 x H168 x D390 mm, 15.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/9/2 sales price 798,000 yen Maintained! Original Model 7 You can enjoy a glossy mid to high range sound with a high sense of transparency and a thick, exquisite balance. It's a model that has been over half a century since it went on sale for analog fans, but it's still one they admire. Please enjoy the glossy and indescribable atmosphere. In addition to scuffs scattered on the exterior and cabinet, a feeling of use can be seen, such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.2.27 maintenance (wiring repair) 2023.3.8 maintenance (lamp replacement) 2022.12.27 maintained (each switch and selector poor contact repair. Balance disassembly cleaning repair. Low pressure selenium deterioration countermeasures → 4 additional diodes. 4 1W resistors replaced 2 short pin replacements Vacuum tube socket and RCA jack re-caulking repair*Operation has also been checked with AC 100 to 117 V (please do not change the order of the vacuum tubes as much as possible (noise level etc. are optimized))
Accessories: none
Main specifications: tubular control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, 7.5 kg
Maintained by Denon Service! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient. The exterior is dull and has threads. Serial 1534039 (Yonejima Satoshi)
Maintenance information: 2024.8.25 manufacturer maintained (arm replaced. Arm horizontal mounting screw cover installation CDS exchange. (Inspection of each part, operation, sound test)
Accessories: copy of instruction manual
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Everything from exterior painting to driver gap cleaning has been refreshed and maintained with attention to detail! ※There is a tear repair mark on the mid-bass cone on one side. The original 4343 by All Alnico, the original 4343 of 4343! An unbearable gray finish model with crisp low frequencies and punchy high frequencies. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-mic recordings regardless of age or genre. Serial 16513 16199 (Murakoshi Yoichi)
Maintenance information: 2024.8.24 maintenance (one-sided mid-cone tear repair) 2019.4.14 maintained (terminal cleaning, insulation bushing and mounting screw replacement. ATT exchange. INT/EXT switch-over SW cleaning A frequency characteristic measurement check (~ 42 kHz) was performed, the 10 ohm resistor for the tweeter on one side was replaced, and the original capacitor was continued to be used. Check the input/output waveform and balance, and check the sound output. Woofer maintenance (edge replacement). Midmaintenance (edge replacement). Driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, screw replacement, terminal contact cleaning). Tweeter maintenance (magnetic circuit gap cleaning/center adjustment, screw replacement, terminal contact cleaning) exterior repair/gray paint. Front and rear baffle paint. Saran net replacement. Saran frame repair. Woofer midcone paper coating. Unit detaching/diffuser cleaning)
Accessories: saran net, diffuser
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2024/8/10 sales price 128,000 yen Input volume, RCA terminal processing, installation, etc. have been maintained! Although the Quad power amplifier has a compact body, the core is thick, and you can enjoy smooth sound. It really goes well with speakers made in England, and lets you listen to 70s analog sound with a sense of dynamism. There are exterior, feel of use depending on age, paint peeling, sticking marks, scuffs, and small scratches. Serial 2 2022 (Hiura Katsuji)
Maintenance information: 2024.8.9 maintained (SP terminal replacement (original), other internal all checks, characteristic failure due to Rch power stage Tr temperature change → replacement, in-board gain setting C NG, SP limiter circuit C NG → replacement ~ operation check)
2015.8.25 Maintained (RCA terminals installed. IC, capacitor, resistor, input VR, fuse replacement)
Accessories: power cable, instruction manual (copy)
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The price has been reduced. 2024/8/6 sales price 18,000 yen crossover 10,000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: none
Main specifications: Compatible models F-5/F-15/F-15L attenuation characteristics -12, -18 dB/oct 10,000 Hz
The price has been reduced. 2024/8/6 sales price 15,000 yen Crossover board crossover frequency 1000 Hz for F-5/F-15. The damping slope can be changed with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: original box
Key Specifications: Crossover 1200Hz Chandeber Board
Maintained in 2015. A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1569/14189 (Murakoshi Yoichi)
Maintenance information: 2015.10.29 maintenance (terminal polishing, cleaning, insulation bushing & mounting screw replacement. ATT exchange. Fixed a wiring mistake. Capacitor replacement. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz)
Accessories: none
Main specifications: crossover frequency 7 kHz, allowable input (continuous program), 50 W impedance, bass range: 12 to 16 ohms, treble range: 12 to 16 ohms, treble attenuation/variable volume, mounting hole W140 x 108 mm 0.7 kg
The price has been reduced! 2024/8/2 sales price 49,800 yen ※Since the volume has already been replaced, operation with a remote control is not possible. Maintained. A mid-range model in the ES series, a masterpiece amplifier from the heyday of audio. While the sound is crisp and well-contoured, the balance that doesn't feel tight is attractive. There are scratches and line marks on the exterior. Serial 204886 (Fujisawa Yukishi)
Maintenance information: 2024.8.2 maintained (power supply 8A fuse broken replacement, output circuit resistance deterioration replaced at 4 locations, other speaker relay deterioration replaced, VR replacement for other attenuators to confirm the ignition sound at 9 o'clock position, other INPUT selectors, speaker selectors, direct selectors, RECOUT selectors, Cartrich selectors disassembly/contact carbon polishing and cleaning grease, other DC bias DC balance adjustments (Since the attenuator is replaced with a custom-made replacement, the volume cannot be changed when using the remote control.)
Accessories: No accessories
Main specifications: 105W+105W (8Ω) W470 × H165 × D435 mm 21.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/7/28 sales price 69,800 yen Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. The exterior is dull and there are small scratches. Serial 42932 43349 (Tomonori Asaine)
Maintenance information: 2024.7.28 maintained (vibration diaphragm installation adjustment, pad dampener and screw rust exchange terminal ultrasonic cleaning, insulation bushing replacement diaphragm dirt cleaning)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, serial 37658/38816, W145 x D97 mm, 5.1 kg/bottle
The disposal price has been reduced! (Member discounts are not applicable) 2024/7/18 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. The exterior has a feeling of use such as dullness. Serial 41000 (Takahashi Nobuyuki)
Maintenance information: 2024.7.18 Operation confirmed 2024.3.22 Maintained! (Internal check DC cut C, gain setting C, etc., exchange Tr, etc. check operation check, DIN4P-RCA female cable creation)
Accessories: power cable connection cable
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The price has been reduced! 2024/7/14 sales price 49,800 yen Maintained! A hit model during the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. Although it is an entry class, the spacious sound quality unique to the 80s is attractive. The exterior has line scratches and dullness. Serial 207331 (Yonejima Satoshi)
Maintenance information: 2024.7.14 maintained (replaced with a main VR custom-made product, balance VR exchange, speaker relay replacement, mute push SW exchange, 12 locations replaced due to deterioration in board resistance, source direct, INPUT selector, cartridge LOAD, REC OUT selector, polishing, cleaning grease application for each disassembly contact, DC balance, bias adjustment, sound confirmation for each input/output connection)
Accessories: copy of instruction manual
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/7/7 sales price 59,800 yen ※ The specifications of the baffle around the unit have been changed to urethane, and it has deteriorated, so it is cheap, and it is currently sold. AR tall boy speaker By adopting a build-in mirror image subwoofer, you can enjoy a slim yet spectacular sense of scale. In addition to the exterior, as described above, a feeling of use can be seen on the unit, such as bond marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.5 operation confirmed
Accessories: saran net, general purpose jumper
Main specifications: 3 way 4 speakers, 97 dB, 8 ohms, frequency characteristics, 30 Hz to 20 kHz, crossover frequency 120 Hz, 2.5 kHz, W265 x H1,093 x D478 mm, 33.3 kg
The price has been reduced. 2024/6/24 sales price 59,800 yen It has been maintained at the manufacturer, including a genuine brand new pip-up exchange! Mid-level model compatible with SACD. Equipped with a uniquely developed SACD/CD drive mechanism. The low frequency base has a firm sense of stability, and you can enjoy music with relaxed sound quality on both SACD/CDs. Recommended for those who want to enjoy SACD casually. The exterior is dull and has small scratches (Sasaki Shota)
Maintenance information: 2024.6.23 manufacturer maintained (laser pickup, loading belt, CD board capacitor replacement. (Others, inspection of each part, sound test)
Accessories: power cable, remote control
Main specifications: output terminal RCA · OPTICAL · COAXIAL · multi-channel SACD/frequency range 2 Hz to 100 kHz SNR 113 dB dynamic range 107 dB CD/ frequency range 2 Hz to 20 kHz SNR 118 dB dynamic range 100 dB dimensions W434 x H135 x D330 mm weight 7.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/5 sales price 148,000 yen Maintenance completed! Scarce! Mcintosh tubular 2ch mono FM/AM tuner. The band was changed from the US version to domestic use, and the deteriorated vacuum tubes, capacitors, etc. were replaced, and they were restored brilliantly. I take my hat off to the persuasive power of the tuning, and the super rich, sexy sound quality typical of McKinn, even just listening to the narration. In addition to paint peeling on the exterior and metal frame, you can also see a feeling of use over time, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintained (for US use → band change/AC100 → 117V step-up transformer added AC code exchange/block capacitor 50 μF x 4 replacement/3 electrolytic capacitors 20 μF, etc. · 5 ceramic capacitors 15 pF and others added or replaced · 2 vacuum tubes 6Be6 and 6AB4 replacements (both offset with supply 6V4) · AM antenna line 5m added · vacuum tube 6U8 and 6AB4 (2 6AU6 exchanges, IF/RF readjustment ※ operation checked with other AC117V)
Accessories: step-up transformer
Main specifications: Vacuum tubes used EF94/6AUC, 6BN6, 6BJ6 x 2, 6BA6, 6B4, 6B07A, 12AU7A, 6BQ7A, 6AL5, 6BU8, 12AU7R, etc., all 18 others W374 x H120 x D304 mm 7.7 kg
The price has been reduced. 2024/6/4 sales price 5,000 yen. Denon speaker stand The height can be changed, so it's convenient. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W355 x H535 to 950 (adjustable height) x D309 mm 3.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 2,980,000 yen In addition to full maintenance including the exterior in 2020, the ATT has now been cleaned and inspected all parts, and further brushed up. The Georgian 4, which has an attractive elaborate horn configuration and beautiful furniture-like design, has arrived. It has a structure with a built-in crispy horn to create a unique sound with a rich sense of scale. There is a smell in the room (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (ATT cleaning/inspection of various parts) 2020.2.12 maintained ([main body] exterior cleaning/touch repair, resonance/distortion countermeasures, unit detachment [unit] single-sided woofer recorn, both driver disassembly and cleaning, TW one-sided disassembly and cleaning, TW single-side coil manufacturing exchange [network] TW capacitor and resistor replacement. *Some capacitors before replacement are difficult to remove, so they are left inside. Frequency characteristic measurement check (~ 42 kHz). Input/output waveform and balance check, sound output check.)
Accessories: none
Main specifications: 15WK, MT-30 (828HF), T35VHF, X336 (300/3500) approx. W860 x D660 x 1350 mm approx. 90 kg
The price has been drastically reduced. 2024/5/20 sales price 12,000 yen crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
The price has been reduced. 2024/5/19 sales price 49,800 yen Maintained. This is a heavyweight premain amplifier manufactured by PIONEER. Since they are only from the bubble period, large quantities of material were used, and they are highly cost-effective amplifiers. Even the smallest sounds are clearly reproduced, and the sound quality, which is both thick, shows how well crafted it was unique to that time. Overall there are small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (output relay replacement, master volume exchange, muting SW exchange, direct switch, etc., switch disassembly polishing grease application (input selector, recoup, loudness, tape 3, speaker switching SW), each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation. * (Additional note) Since the master volume is a replacement, it can be adjusted in detail when the volume is low to medium volume, but when the volume is raised and auditioned, the VR seems to be raised (12:00). (*When listening to a phono, the sound will not come out unless the EQ switch is turned on)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) 120W+120W (6Ω) 150W+150W (4Ω) power consumption 270W dimensions W420 x H162 x D435 mm weight 19.6 kg
Both the interior and exterior have been fully restored and refreshed! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. It is beautiful due to exterior repairs (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement/frame repair/reinforcement. Unit maintenance: low range/edge exchange, magnetic circuit gap cleaning/center adjustment, high pass/magnetic circuit rust removal/gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
Hamilex (Hayami Kosan) pedestal speaker stand. The direction of the top plate can be changed to vertical/horizontal orientation according to the speaker, and the mounting direction of the struts can also be changed according to the atmosphere of the speaker to be installed. (Fujisawa Yukishi)
Accessories: Instruction manual
Main specifications: Total load capacity 50 kg (1 unit) W350 × D320 × H400 mm Approx. 5.8 kg/unit
The price has been reduced. 2022/7/4 sales price 12,000 yen 2.5mm plug specification for genuine balance cable for IER-Z1R. Shafts have been exchanged with perfect accuracy. If you have an DAP with a 2.5 mm balance terminal such as Astell&Kern, this is for you. (SASAKI Shota)
Maintenance information: 2022.7.4 sound output confirmed
Accessories: none
The A2500 is a tube type power amplifier kit that has been replaced with speaker terminals that are easy to use even for beginners. 6AQ8 for the first stage and 12AU7 for the phase reversal stage both use triodes. Since triodes are used across all stages, the sound is taut and bright, with excellent nude characteristics. The exterior has dullness over time, rust, and small scratches. Serial 560561 (Miura Kimiya)
Maintenance information: 2018.4.28 Maintained (printed circuit board resistor replaced. (Adjustment characteristics check OK) 2014.11.21 maintenance completed (input VR, vacuum tube socket, coupling capacitor, SP terminal, BIAS DC BAL, semi-VR, each deterioration exchange, adjustment, characteristic check OK)
Accessories: instruction manual
Main specifications: 6 RA8 push-pull 6 RA8 x 4/12 AU7 x 2/6AQ8 10W+10W W410 x H145 (with hood) x D190 mm 9.6 kg
The price has dropped drastically. 2018/8/31 sales price 79,800 yen The capacitor has been replaced with a JENTZEN film capacitor! The network used in the L200B. Perfect for 2-way use assuming a JBL 15 inch woofer. It is a rare network with a thick and powerful sound. There are stains and small scratches on the exterior (Wang Zhan)
Maintenance information: Maintained on 2015.7.7 (terminals replaced with banana plug compatible products. The connection part of the input wiring was changed to a gobble. ATT exchange. Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check)
2011.7.21 Maintained (capacitor - replacement, silicon bond application, ATT contact check, rivet repair, characteristic check, sound and waveform check, interior cleaning, etc.)
Accessories: none
Main specifications: 8Ω 800Hz 150W mounting opening W91xH98mm screw pitch left and right 111 mm top and bottom 143 mm
Refresh yourself by replacing the insulated push with a new one! The terminals have also been polished, so you can use it comfortably. A dividing network with a crossover frequency of 1200 Hz. If you cut it a little lower, I think the impression will change quite a bit once you try using it. How about going with making a system? The exterior is smudgy and has a feeling of use. (OYAMA Sachiko)
Maintenance Information: 2015.10.19 Maintained (terminal polishing, cleaning, insulation bushing & mounting screw replacement. ATT (SW) cleaning.
Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz)
Accessories: none
Main specifications: crossover frequency 1.2 kHz impedance low range: 8 to 12 ohms high range: 12 to 16 ohms 1.1 kg