Unspecified speaker stand. It's heavy and well-built. If you're looking for this size, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate W240 x D242 mm W280 x H630 x D340 mm 15 kg (actual measurement)
*Currently sold. Audio-Technica's MM/MC compatible phono equalizer. Although it is affordable, it is well-built and MM/MC compatible. Recommended for modern systems without phono input. In addition to the exterior and cigarette smell, dullness and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: AC power
Main specifications: input impedance mm47kΩ/mc100Ω W44 x H105 x D135 mm approx. 460 g
※ There is no problem with operation, but it is sold as is because it is cheap. Headphone amplifier using vacuum tubes. You can enjoy a clean sound (Oikawa Tetsuji)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: power cable
Main specifications: Vacuum tube used 6N16B W210 x H70 x D330 mm 3.1 kg (actual measurement)
XLR cable with 1.0m peer-notric terminal, 3-core specification for the popular line cable “8412.” There is a sense of power throughout the entire range, and the warm sound quality with thick mid to low ranges is attractive. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
Although it has been cleaned, the cigarette smell remains, so it is cheap. Maintained! Marantz's mid-level premain. It is characterized by a sense of transparency and delicate tone typical of Marantz. It is supported by a thin yet sturdy power supply unit, and you can enjoy sound with a sense of stability. The main switch was damaged, and other dirt cannot be removed (Daiki Goto)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: 90W+90W (8Ω) 140W+140W (4Ω) frequency characteristics 5Hz to 100kHz W440 × H123 × D444 mm 18 kg
It has a strong tobacco smell and is inexpensive because it has many scratches and veneer peeling. The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. ※The trolley is not included (Sasaki Shota)
Accessories: nothing
Main specifications: front load horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
It smells like tobacco, so it's cheap. LP record static removal brush Upgraded model of the best-selling SK-2. It is rhodium plated to remove static electricity more quickly and reliably. Can also be used on CDs and DVDs
Accessories: nothing
Main specifications: brush specifications/tip = natural hair (black goat's beard) root = synthetic hair (acrylic fiber), thickness 46 denier, conductive fiber (copper sulfide chemically bonded to acrylic fiber) W60 x H170 x D30 mm 36 g
Since it is a custom-made product sold as an input transformer pair, the specifications are unknown, but they are described by hand. Primary: 600 Ω Secondary: 20 kΩ CT The resistance value has been measured with a tester (1-3:20.7 Ω, 2-4:20.7 Ω, 5-7:198.3 Ω, 6-8:198.8 Ω) W78 x H110 x D66 mm approximately 1.6 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
*The stylus is made by JICO. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The cantilever is slightly leaning to the left (Sasaki Shota)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: nothing
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Maintained! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is dull over time, and there is a lot of feeling of use. Serial MZ02821280143 (Murakoshi Yoichi)
Maintenance information: 2024.6.14 maintenance (tray slide motor belt and CD standby motor belt, C replacement in CD servo)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
Built-in phono equalizer unit. Equipped with a high performance high gain equalizer. The internal dip switch allows switching between MM and MC, and the MC input impedance and subsonic filter can be set to ON and OFF.
Maintenance information: 2024.6.10 Operation confirmed
Accessories: none
Main specifications: Compatible models C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, etc. [MM type cartridge] gain 36 dB, input impedance 47 kΩ [MC type cartridge] gain 62 dB, input impedance 10/30/100 Ω switching E-550 E-350 E-450 C-2110
*The remote control is out of stock, so it is cheap and is currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. The sound quality is stable in both digital and analog. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) line input 4 phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg
The price has been drastically reduced! 2024/6/7 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Great sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Jun Tamai)
Accessories: none
Main specifications: size W440 x D490 mm x H58 mm weight 7.0 kg
A small but authentic pre-main amplifier with a built-in FM/AM tuner. Comes with PHONO input (MM/MC), so you can enjoy analog well. It's a perfect match for those who can't play very loudly or for second systems. There are no major noticeable scratches on the main body, but there is corrosion on the battery part of the remote control (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: remote control, power cable
Main specifications: 75W+75W (8Ω) 150W+150W (4Ω) MC/MM compatible AM/FM tuner built-in W300 x H80 x D341 mm 5.5 kg
The price has been drastically reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 operation confirmed
Accessories: power cord, connection cord, EP adapter, subway, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
The price has been reduced. 2024/6/17 sales price 198,000 yen It is built in a form that satisfies modern recording requirements, such as a DSD 11.2 MHz USB-DAC, a phono amplifier compatible with MC cartridges, and balanced input. It is a playful preamp with warm sound by NuTube, which was jointly developed by KORG and Ise Electronics, and an audio driver equipped with “S.O.N.I.C. Remastering Technology” produced by Mr. Ono Seigen. There are no major noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: original box, power cable
Main specifications: 2CH compatible format (USB) DSD 2.8224 MHz, 5.6448 MHz, 11.2896 MHz, 1 bit DSD3.072 MHz, 6.144 MHz, 12.288 MHz, 1 bit (only when using S.O.N.I.C. remastering technology) PCM44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz 352.8 kHz 384 kHz , 16 bit, 24 bit audio driver ASIO2.1, WDM, Core Audio (*no guarantee of operation of Windows other than Intel chips) external dimensions W432 x H93 x D282 mm 5.9 kg
The price has been reduced. 2024/6/15 sales price 17,000 yen Krypton thin audio board. The original technology, heavyweight “iron ball sand,” has been adopted, which has a very large specific gravity to prevent electromagnetic noise from the device, and the mass is also heavy, making it possible to absorb external vibrations drastically due to the vibration of the iron ball. There is a feeling of use on the exterior such as dullness and line damage (Asaine Tomoho)
Accessories: none
Main specifications: W450 x H21 x D400 mm 5.2 kg
The price has been reduced. 2024/6/15 sales price 16,800 yen VM520EB model with head shell AT-HS10. Uses a bonded elliptical needle and aluminum pipe cantilever to reduce tracing distortion and extract accurate information. High frequency sensitivity and amount of information shine (Tomoho Asaine)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: original box head shell AT-HS10
Main specifications: VM type playback frequency range 20 to 23,000 Hz output voltage 4.5 mV (1 kHz, 5 cm/sec.) Channel separation 27 dB (1 kHz) output balance 1.5 dB (1 kHz) needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 2.7 kΩ (1 kHz) DC resistance 800 Ω load resistance 47 kΩ mass 16.8 g (6.4 g for VM520eB only)
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
The price has been reduced. 2024/6/16 sales price 378,000 yen A new-generation premain amplifier that integrates the performance of a reference separate amplifier into one housing. All stages are balanced from input to output. The smooth tone in the mid to high range is impressive, and it beautifully reproduces vocals, strings, etc. The bass also has a sufficient sense of volume, and the sense of scale is perfect. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) playback frequency band 5Hz to 50kHz input: PHONO (MM, MC) 1 system, 4 analog systems W440 x H168 x D453 mm 21.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/8 sales price 450,000 yen Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/dumping agent application, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removed aluminum seals that do not require unit detachment Terminal wiring related retreatment idle rotation prevention treatment re-fix unfixed internal coils with silicon ATT contact cleaning. Since the wiring is broken at the root of the resistor, an exchange frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
The price has been reduced. 2024/6/16 sales price 298,000 yen The sound is enveloping, and there is sex appeal in the glossy mid-high range. It also excels at reproducing acoustic instruments, so you can enjoy vivid playback sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: saran net, spikes, original box
Main specifications: rear bass reflex type frequency characteristics 28 Hz-22 kHz 91 dB 4 Ω crossover 110 Hz, 2,500 Hz W190 x H1085 x D400 mm 32.5 kg
Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed.
Accessories: copy of the manual
Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg
The definitive edition of the Orthophone MC transformer. Comes with an MC/MM switcher SW, so you can switch easily. The rounded, warm sound quality is attractive. There is a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: boost ratio 27dB (3Ω, 47kΩ, 1kHz) input impedance 2Ω to 6Ω load impedance > 47KΩ channel balance <0.5dB frequency characteristics 10 to 100 kHz W153 × H95 × D110 mm 1.36 kg
※Inexpensive because it has a cigarette smell and dirt. Comes with a self-made stand. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is corroded and dull, and although it has been cleaned, tobacco smell and dirt cannot be removed (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: self-made stand
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
192 kHz 24 bit D/A converter. The sound image has a clear tone, and it is a high performance model that can also be used as a headphone amplifier. There is a dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: power cable only
Main specifications: 2 channel 24-bit 192 kHz compatible D/A conversion input 3 systems (coaxial, XLR, optical) W205 ✕ H45 ✕ D240mm 1.6 kg
Rhodium plated The PSE standard cable clamp part was changed from conventional resin clamps to special stainless steel, which is heavy and has excellent damping properties. This effective vibration countermeasure maximizes the potential of the device (Oikawa Tetsuji)
Accessories: none
High end outlet plug. The socket blade is a hybrid high-durability plug with palladium 0.3 microns plated on 3 microns of gold.
Accessories: nothing
Main specifications: cable compatible outer diameter up to 15 mm, wire compatible diameter up to 2.0 SQ
It is inexpensive because it leaves a cigarette smell. A turntable seat with high vibration resistance made of porous ceramic. It is a porous ceramic with 45 micron pores in an alumina crystal, and can be expected to have high vibration resistance (Sasaki Shota)
Accessories: none
Main specifications: 303 mm in diameter, 7 mm in thickness, 1.2 kg in weight
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
It is inexpensive because it leaves a cigarette smell. This is a carbon record mat. The fine vibrations transmitted from the turntable are reduced, the sense of silence is increased, and the sense of sound image is improved (Sasaki Shota)
Accessories: none
Main specifications: diameter approx. 295 mm, thickness 4 mm
The high-quality textured design of KOJO TECHNOLOGY's “Virtual Earth” top cover with a satin white anodized finish is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in surface area, partial material changes, and S/N improvements, but also improvements in fineness (Sasaki Shota)
Accessories: original box, manual, connection cable
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
115V specification Professional power amplifier made in Germany. Although it is thin, 1U in size, it features crisp, sharp sound quality unique to professional use. It is a character that pushes forward and makes jazz and rock sounds in a stylish way (Sasaki Shota)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: manual
Main specifications: 115V/230V switching type 100W+100W (4Ω) 65W+65W (8Ω) size W483 x H44 x D250 mm weight 7.5 kg
Maintained by the manufacturer! Luxman CD player with a soft sound. It's easy to hear even when you listen for a long time, and you won't feel tired from listening. It is also recommended to use it in total with L-505s and L-507s of the same age. The exterior is slightly scratched and slightly torn. Serial M90110760B (Fujisawa Yukishi)
Maintenance information: 2024.6.14 manufacturer maintained (replaced due to loading belt deterioration. Tray rail, grease up. Pickup lenses, cleaning. remote control, internal cleaning, general adjustment)
Accessories: remote control, power cable
Main specifications: HDCD playback compatible analog output, 1 RCA unbalanced system, 1 XLR balance system, 1 digital output, 1 coaxial system, W467 x H144 x D396 mm, 9.5 kg
Maintained by the manufacturer! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. The exterior is dull and small scratches can be seen. Serial 25633 (Yonejima Satoshi)
Maintenance information: 2024.6.16 manufacturer maintained (16 transistors replaced. Rotation switch/power switch micro SW replacement. Leaf spring SW cleaning, speed adjustment. (Other inspection of each part, operation test)
Accessories: No accessories
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
Maintained! Adjustable 3-way channel divider Crossover frequencies for LOW/MID 4 and MID/HIGH 4 stages can be selected. Furthermore, it is equipped with a FLAT position. It is possible to switch between 200/400/570/800 Hz and 2500/3500/5000/7000 Hz. There are small scratches and corrosion on the exterior. Serial 141628 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (replacement of deteriorated capacitors in the circuit. Power circuit transistor replacement. Switch and volume contacts corrected. I/O pin jack polish (This is a specification because each switch only makes a low sound when FLAT)
Accessories: No accessories
Main specifications: W408 x H134 x D280 mm weight 5.4 kg
The dust cover is missing. ROTEL record player. It is also recommended for those starting out with semi-automatic audio. Also, the design that blew through is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 maintenance (belt replacement, arm operation, voice check)
Accessories: cartridge
Main specifications: W436 x H130 x D350 mm 4.8 kg (actual measurement)
Equipped with a titanium-coated 7th generation Uni Q driver. Atmospheric sound quality with a wide range. It comfortably plays vocals, chamber music in small groups, etc. Exterior, there are only 3 banana red and black caps on the SP terminal, and in addition to the jumper cable being general-purpose, there is a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: saran net, spikes, jumper cables (general-purpose products)
Main specifications: 3-way 3-speaker frequency characteristics 40Hz to 40kHz W220 x H865 x D372 mm 14.5 kg
The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
It has been replaced with a cloth edge. Currently sold. Onkyo's 3-way bookshelf speaker The stretchiness of the mid-high range, which is typical of Onkyo, makes me feel comfortable listening to vocals. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 sound output confirmed (replaced with cloth edge)
Accessories: saran net
Main specifications: 3-way bass reflex 6Ω 91 dB W380 x H670 x D363 mm 34 kg
Manufacturer maintained, including pickup replacement! A CD player with a simple design, good cost performance, and easy for beginners. It is equipped with 10 keys that are convenient for station selection. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.13 manufacturer maintenance (loading belt/tray opening/closing SW exchange, laser pickup replacement, inspection of other parts, sound test)
Accessories: none ※remote control missing
Main specifications: 2 analog outputs (variable, fixed), 2 digital outputs (OPTICAL, COAXIAL) W433 x H115 x D288 mm 6.3 kg
It inherits the power supply technology that achieves high speed responsiveness and high signal-to-noise ratio developed with the Technics premium Primain SU-R1000. It's a tuning that you can listen to with peace of mind regardless of genre with responsive low frequency playback with strong speaker driving power. There is also a PHONO input compatible with MM/MC cartridges, and the fact that it is compatible with various sound sources and peripherals from analog to digital is attractive because it has excellent cost performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) phono MM/ MC compatible PC input: back USB B type connector x 1 digital input: optical square terminal x 2, coaxial digital input W430 x H148 x D428 mm 12.7 kg
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Significant sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Tomoho Asaine)
Accessories: none
Main specifications: size 350 x 450 mm height 58 (± 2) mm weight 6.0 kg
By placing this plate between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Hiroki Aso)
Accessories: none
Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
※The spikes are out of stock, so it's cheap. It is an audio isolation board that combines soft materials and hard materials to absorb unnecessary vibrations (resonances). The flat full-band characteristics improve the resolution of all bands and faithfully express subtle sound nuances. There is a feeling of use on the exterior, such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W500 x D450 x H20 mm with 5 cone spike mounting holes on the back.
High sound quality floating board with a combination of special springs and wires. A special coating with high friction is used on the board surface. Sound quality improvements can be expected from all devices such as speakers, record players, and amplifiers. There is a feeling of use such as small scratches scattered around (Asae Tomoho)
Accessories: none
Main specifications: size W375 x H60 x D475 mm weight 6.0 kg (actual measurement)
High sound quality floating board with a combination of special springs and wires. A special coating with high friction is used on the board surface. Sound quality improvements can be expected from all devices such as speakers, record players, and amplifiers. There is a feeling of use, such as small scratches scattered around (Asae Tomoho)
Accessories: none
Main specifications: size W210 x H58 x D297 mm weight 2.2 kg (actual measurement)