This is an audio-technica top model that uses ebony wood for the housing, which has not arrived in a long time. A clear, three-dimensional sound world without stuttering appears in the brain. It's lightweight and comfortable to wear so you won't feel tired. The exterior has a room smell like air freshener (Tamura Eiji)
Maintenance information: 2024.6.12 sweep check OK
Accessories: case, instruction manual
Main specifications: sealed dynamic output sound pressure level 102 dB playback frequency band 5 to 45,000 Hz
*Currently sold. microphone amplifier It is possible to pick up and amplify sound with an AV device without a microphone terminal. There are no noticeable scratches on the exterior (Sasaki Shota)
Maintenance Information: 2023.8.11 Operation confirmed
Accessories: original box, power adapter, manual
Main specifications: W70 x H30 x D92 mm 160 g
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: needle cover, original box
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustment are possible (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 10g
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
※There is no problem with operation, but it is currently sold because it is cheap. Compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input. Perfect as an introductory machine (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: power cable, original box
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
*Currently sold. DENON's MC type cartridge boost transformer. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type) with a single arm. Also, since it uses a transformer designed for the DL-103 and DL-103S, it fully demonstrates the capabilities of the models described above. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz dimensions W51 x H53 x D181 mm weight 0.65 kg
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
2023 Maintained! One of the best masterpieces of pre-main amplifiers in SANSUI history. It's powerful, with a sense of extrusion, and makes you hear a stretchy and expansive sound. The deep sinking low frequencies and the good tone unique to MOS are some of the best finished premains in SANSUI history. As for the exterior, there are scuffs and line scratches on the top plate. Serial 606068517 (Yonejima Satoshi)
Maintenance information: 2023.6.23 maintained (power supply circuit part rectifier diode replacement, transistor, resistor exchange, indicator lamp replacement, protector part transistor replacement, output relay, headphone relay replacement, power amplifier part solder repair, rec selector, power amplifier direct switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, SP terminal correction, adjustment, operation confirmation. (*There is some hardness on the SP terminal)
Accessories: instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W450 × H176 × D486mm 32.1 kg
※The manufacturer logo on the front is missing, so it's cheap. Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. There are scratches, bumps, dirt marks, etc. on the exterior. Serial 613082601 (Tamura Eiji)
Maintenance information: 2024.6.13 maintained (input selector, etc., switch dismantling and polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor), output relay replacement, protector part capacitor replacement, power amplifier part resistor replacement, interior and exterior inspection and cleaning, operation confirmation)
Accessories: none
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. There are threads and small scratches (Daiki Goto)
Maintenance information: 2024.6.2 maintained (maintenance contents/TONE and other subsonic, loudness, processor, muting, source direct, power amplifier direct, input selector, tape switch disassembly, polishing grease application, output relay replacement, protector capacitor replacement, each volume, switch cleaning, pin jack polishing, internal inspection and cleaning, running test.)
Accessories: copy of the manual
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (protector circuit capacitor replacement, output relay replacement, phono and pin jack polishing, input selector, etc., switch disassembly polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor switch), each volume, switch cleaning, internal inspection and cleaning, adjustment inspection, operation confirmation, running test)
Accessories: instruction manual (copy)
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
Maintained in March 2024! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. As for the exterior, there is a scratch on the top plate. Serial 611088582 (Tomonori Asane)
Maintenance information: 2024.3.21 maintained (tone and other switches dismantled and polished with grease applied (turnover, subsonic, muting, loudness, processor, input selector, reck-out, power supply direct, source direct, tape, MM/MC changeover switch), power amplifier, power circuit transistor, resistor, adjustment volume, diode replacement, solder repair, each volume, switch Cleaning, output relay, headphone relay replacement, DC, bias adjustment, interior and exterior inspection cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
The price has been drastically reduced. 2024/6/2 sales price 278,000 yen Maintained! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (power amplifier direct, etc.) switch disassembly polishing grease application (loudness, subsonic, muting, processor, reckout, MM/MC switch, input selector, source direct, tape), output relay replacement, power amplifier section, power supply transistor, adjustment volume replacement, solder repair, volume, switch cleaning, DC, bias adjustment , running test)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
The price has been reduced. 2024/6/9 sales price 10,000 yen ※Since the video has not been checked, it is currently on sale. Multi-function AV amplifier equipped with high sound quality surround circuit D.D.S.C. Digital, uses high sound quality technology AL24 Processing Plus for all channels, and is equipped with a high image quality 1080p compatible digital video interface HDMI. The exterior is dull and there are line marks on the front panel. Serial 7041502162 (Tomonori Asaine)
Maintenance information: 2024.6.8 Operation confirmed ※The video has not been checked.
Accessories: Remote control*LCD is dim, power cable
Main specifications: Equipped with a 192 kHz/24 bit compatible digital interface receiver, A/D converter, and D/A converter; Rated output: 8 ohms; 120 W x 7; size: W434 x H171 x D429 mm; weight: 18 kg
※It is inexpensive because it is sticky. RCA cable, 1.0 m pair, 6N copper+silver hybrid conductor, Teflon insulator connector with correction chuck mechanism, is a high-performance model that adds a sense of dynamism of sound to the lower model's bass resolution and high transparency in the mid to high range. It rubs against the filter box, the paint is peeled off, and the sheath is sticky over time (Yonejima Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
The price has been reduced! 2024/6/11 sales price 69,800 yen ※Currently sold. Aiwa's DSD DAC. A/D converter and D/A converter set. It is possible to reproduce DSD 1-bit 64fs signals in SACD format. Even with analog input from compressed sound sources such as MP3s, the sense of localization, sound field, and luster of sound are improved. Serial D101211111 WD01210911 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: power adapter, HMDI connection cable, instruction manual
Main specifications: AX-D1: DSD1 bit/64 fs playback frequency band 20 Hz to 100 kHz (+0/-3 dB) dynamic range 102 dB or more, SNR ratio 102 dB or more at 1 kHz, 107 dB or more at 20 kHz channel separation 100 dB or more size W250 x D170 x H50 mm weight 1.5 kg AX-WD: LPCM192 kHz/24 bit/128 fs DSD1 bit/ 64fs (DSD64 mode, 2.8224MHz) size W250 x D170 x H50 mm weight 1.6 kg
Power cable 1.2m Power cable using the original precision conductor “102SSC”. A cable with a strong monitor color that clearly reproduces music. Recommended for connecting to professional audio devices. (FUJISAWA KOSHI)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
It is the base for Yamamoto's acoustical crafts, which are highly regarded for their horns and enclosures. The plate-shaped base is made of laminated Asada cherry wood, and can be used not only as an amplifier, but also as a speaker stand. Stability has been improved, and you can enjoy tight sound quality (Hiroki Aso)
Main specifications: thickness: 25 mm; dimensions: 600 x 480 mm; weight: 4.5 kg
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
Bessatsu Stereo Sound/Fun Relationship between Rock and Audio/Which one came close to the sounds of Les Paul and Stratocaster? /Testing 30 model speakers under 300,000 yen/DJ audio research ~ Mixer as preamplifier/appeal of CDJ players/21st century masterpieces/remastered masterpieces/multi-channel masterpieces/"Pink Floyd/Madness” SACD multi research/ 2003.7.31 publication. The photograph is a sample, so the actual product may be broken, written, etc.
Comes with original box First arrival at Hi-Fi Hall. Headphones with a focus on sound and design. You can enjoy it regardless of genre with clear lines of sound. It is characterized by being comfortable to wear without the impression that it is being compressed. It is in good condition (Sasaki Shota)
Maintenance information: 2024.6.2 operation confirmed
Accessories: manual, original box, connection cable
Main specifications: diamic sealed 40mm driver frequency characteristics 20 to 22 kHz impedance 30 ohms cord length 1.2 m 230 g
This rack is similar to a GT rack. It is sturdy and has a rugged construction. It's also heavy and well-built, so you can set up a heavyweight amplifier. The upper half is a type that is connected with a dowel so it can be removed. The exterior has peeled off the veneer and is scratched ※A separate shipping fee will be charged, please contact us when shipping (Sasaki Shota)
Accessories: none
Main specifications: W660 x H745 (445+300) x D560 mm 66.8 kg
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
The price has been drastically reduced! 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
Maintained! Inheriting the technology of the C-2302Vintage, it is a control amplifier with excellent cost performance. It uses a Teflon board, a phono input compatible with 3 positions, and WBT for input/output terminals, etc., making it a structure unique to SANSUI with no gaps in specification materials or circuit configurations. It has a sharp, clear, and powerful sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (INPUT switch, CARTRIDGE switch, MODE switch, other selector switches x 4 disassembly contact polishing. Master volume cleaning. Reinforced power board solder. (General adjustment)
Accessories: copy of the manual
Main specifications: Phonoico built-in control amplifier, MC/MM compatible, 7 input systems, 3 output systems, W460 x H137 x D383 mm, 16.5 kg
The disposal price has been reduced! Member prices are not applicable. 2024/5/25 sales price 128,000 yen Maintained! The successor to the C-220, which was particular about the phono equalizer. Models from the heyday of analog are notable models that focus on records. The deep, authentic sound quality of PHONO with good sharpness is attractive. The exterior is dull and has small scratches. Serial C4X515 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (main volume, balance volume contact cleaning. Compensation center switch disassembly contact polishing contact grease application in the sealing door. Electrolytic capacitor replacement near the heating unit. (Check the operation of each input/output)
Accessories: power cord, copy of instruction manual
Main specifications: PHONO (MM/MC) line input 5 systems W466 x H153 x D385 mm 9.7 kg
Maintained! This is a regular imported model from Yamagiwa. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays vintage speakers particularly well (Murakoshi Yoichi)
Maintenance information: 2024.5.28 maintenance (each SW/VOL cleaning, pin jack cleaning, lamp replacement, operation check)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
The price has been drastically reduced. 2024/6/3 sales price 248,000 yen with wood cabinet. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays particularly well with vintage speakers. As for the exterior, small scratches are scattered on the cabinet (Kanai Hidetsugu)
Maintenance information: 2024.3.16 maintained (each SW/VOL cleaning, pin jack cleaning, lamp deterioration replacement, bridge diode deterioration replacement, auto onboard capacitor deterioration replacement, direct connector soldering, pattern re-soldering, operation check (not completely removed)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
The price has been reduced. 2024/6/6 sales price 258,000 yen Maintained! The top Macintosh model in the golden age. You can enjoy the thick and bold Macintosh sound. Comes with an easy to handle 5-band equalizer. An easy-to-use preamp that can be combined with speakers and power amplifiers of a wide range of ages. There is a slight feeling of use such as scratches on the top plate. Serial AY3749 (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 maintenance (TR in the EX Pander board, Tr replacement in the headphone board, operation check, connector caulking cleaning, solder processing) maintained (flat cable replacement, each SW and 2023.3.30 and VOL cleaning, RCA cleaning ※ internal capacitor, lamp, cable replacement (made by another company) IC replacement operation check gap cannot be completely removed) 2022.9.29 Maintained (switch, volume contact cleaning, flat cable replacement, electrolytic capacitor replacement, panel lamp replacement, power circuit tap change, 100V specification change, each input/output operation check)
Accessories: instruction manual (copy)
Main specifications: input terminals Phono 1, 2, AUX, tuner, tape 1, 2, 3 output terminals PRE OUT1, 2, TAPE OUT1, 2, W406 x H138 x D330 mm 11.8 kg
Maintained! Comes with a wood case. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and 7 source input selectors, is also attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.13 maintenance completed (each SW/VOL cleaning, pin jack cleaning, panel peeling correction (characters not allowed), lamp deterioration replacement, push button dismantling and cleaning, resistance burning replacement due to film C short in balance loudness board, .regulator IC defect replacement, operation check ※ balance gap cannot be completely removed)
Accessories: instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
Genuine Electri While being clear and precise, this is a powerful machine that also has the thickness and intensity of sound of successive Macintosh control amplifiers. It is a famous machine with a deep sense of nostalgia that is compatible with both vintage and modern models. Using the familiar 5-band equalizer, it is also possible to change the desired tone depending on the song. The exterior has blows, line scratches, and repair marks. Serial JHD3514 (Fujisawa Yukishi)
Maintenance information: 2018.8.30 Maintained (main volume, balance volume, etc. Contact cleaning. Switch contact cleaning. Head amplifier section and EQ volume circuit capacitor replacement. Power cord replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: built-in monitor amplifier with 5-band equalizer (20W x 2/8Ω), compatible with balanced input/output, PHONO (MM) compatible, W468 x H183 x D432 mm, 12 kg
The disposal price has been reduced. Member prices are not applicable. 2024/6/7 sales price 268,000 yen ※It is cheap because it has scratches. Genuine Oba Shoji product. The uncompromising construction is excellent, with an aircraft-grade machined aluminum block chassis. I am amazed at its compactness and beauty. I'm only particular about the expressive power of the silent part, and the way the faint sound disappears is as clear as if you take your breath away. It's true that it makes me lament the warmth of human skin. There are scratches on the front and back of the top plate on the exterior (Ryo Mizusaki)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control, instruction manual, power cord
Main Specifications: Input Terminal Unbalance (RCA) 2 Systems/Balance (XLR) 2 Systems/Bypass, Unbalanced (RCA) 1 System Output Terminal Unbalance (RCA) 1 System/Balance (XLR) 1 System Input Impedance/Unbalance 48kΩ/Balance 48kΩ Dimensions W348 x H75xD191 mm (maximum dimensions) Weight 4.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/8/26 sales price 5,000 yen. Mini jack to mini jack cable 2.0m This is a power control connection cable that can simultaneously control the power on and off of Macintosh components and the on/off of meter lights. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2023.8.25 continuity confirmed
Accessories: none
The price has been drastically reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency, 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input, 160 W, W650 x H204 x D314 mm, weight: 14 kg
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
Maintained! One of Sansui's few 2 to 4 way NF type channel dividers. It is a channel divider that pursues basic characteristics and multiple functions, and features a highly saturated tone that is close to JBL speakers. After adjustment, the ceiling panel is clean and the design is excellent. There are scratches and scratches on the exterior. Serial 238070032 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (mode selector disassembly contact polishing. Frequency selector x 6 disassembly cleaning Other volume cleaning. (Replace diodes and transistors to enhance power supply)
Accessories: front panel
Main specifications: 2/3/4 way NF filter channel divider with SNR 90dB or higher cutoff frequency (± 10%) [F1] 60/75/95/120/150/190/240/300/380/480/600/750/950/1.2k/1.5k/1.9k/2.4k/3kHz [F3] 1.5k/1.9k/2.4k/3k/3.8k/4.8k/6k/ 7.5K/9.5K/12K/15kHz low star function installed (turnover 60 Hz/100 Hz) W482 x H88 x D305 mm 6.4 kg
This model is limited to 200 units equipped with the highly acclaimed Philips 1-beam swingarm mechanism CDM9PRO. While inheriting the soft and thick sound of CD-23, the straightforward, flat, and well-balanced sound quality is attractive. As for the exterior, there is paint peeling around the legs. Serial MZ009644080005 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: Philips 1 beam swing arm mechanism with CDM9PRO, 1 input/output terminal/digital coaxial output system, 1 digital optical output system, 1 analog unbalanced output system, 1 digital coaxial input system, 1 digital optical input system, dimensions W250 x H124 x D281 mm, weight 6.3 kg
An attractive CD player with a smart design and stable playback ability while being inexpensive. You can enjoy music without getting tired with a smooth, bright tone. The exterior is generally dull and has small scratches. Serial C72PJ1136 (Yonejima Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: power cable
Main specifications: digital output/coaxial 1, optical 1 analog output/1 system W430 × H85 × D290 mm 4.4 kg
※The remote control is out of stock, so it's cheap. Marantz CD player with excellent value for money. The smooth sound quality spans from mid to high frequencies, so you won't get tired of listening even when you listen for a long time. This is a bargain machine with a sense of SN that is more than the price. There is dullness and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual
Main specifications: CD player, CD-R/RW/MP3 file playback compatible, HDAM circuit adopted, size W440 x H89 x D317 mm, weight 5.7 kg
Maintained! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is dull over time, and there is a lot of feeling of use. Serial MZ02821280143 (Murakoshi Yoichi)
Maintenance information: 2024.6.14 maintenance (tray slide motor belt and CD standby motor belt, C replacement in CD servo)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg