The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
Both the interior and exterior have been fully restored and refreshed! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. It is beautiful due to exterior repairs (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting. Saran net replacement/frame repair/reinforcement. Unit maintenance: low range/edge exchange, magnetic circuit gap cleaning/center adjustment, high pass/magnetic circuit rust removal/gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
This is the 3rd generation model of the 500 series with the familiar clean power supply. It secures and supplies clean power that is free from dirty electricity mixed into the home. Now in the 3rd generation, it is an excellent item where progress can be seen not only in the transparency of the mid to high range, but also in the sense of energy in the low range. As for the exterior, there are line marks on the back. Serial D2Y023 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: rated output capacity 510VA, rated output voltage AC100V±1V output outlet, 3P x 8 meters/input/output voltages, strain rate, etc. Switch between 6 types and display W465 x H181 x D386 mm 23.8 kg
The price has been drastically reduced! 2024/5/26 sales price 298,000 yen Current belt drive type player equipped with Luxman's original tone arm. Dust coverless specification. The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The price has been reduced. 2024/6/2 sales price 278,000 yen Maintained! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (power amplifier direct, etc.) switch disassembly polishing grease application (loudness, subsonic, muting, processor, reckout, MM/MC switch, input selector, source direct, tape), output relay replacement, power amplifier section, power supply transistor, adjustment volume replacement, solder repair, volume, switch cleaning, DC, bias adjustment , running test)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
The price has been drastically reduced. 2024/5/26 sales price 278,000 yen Maintenance and cabinet repair completed! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Maintained! The strength of the extrusion of the entire range and the clear sound are truly sounds unique to the heyday of JBL. The mid-high range with a unique sense of spaciousness and strong linearity makes hard bop and trumpet sounds pleasant. The sense of volume in the mid to low range is also attractive not found in modern speakers. The exterior has been beautifully finished due to maintenance (Mizusaki Ryo)
Maintenance information: 2024.5.11 maintained (exterior repair/polishing/oil finish, front and rear baffle/horn repair/painting, saran net replacement/frame repair, woofer edge replacement, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, unit detachment)
Accessories: saran net
Main specifications: 2-way bass reflex, 30cm woofer, frequency band, 40Hz to 16kHz, impedance, 8Ω, sound pressure level, 91 dB, dimensions W406 x H635 x D311 mm, weight 26 kg/book
Comes with a wood cabinet. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays particularly well with vintage speakers. As for the exterior, small scratches are scattered on the cabinet (Kanai Hidetsugu)
Maintenance information: 2024.3.16 maintained (each SW/VOL cleaning, pin jack cleaning, lamp deterioration replacement, bridge diode deterioration replacement, auto onboard capacitor deterioration replacement, direct connector soldering, pattern re-soldering, operation check (not completely removed)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
YBA's rare power amplifier is in stock for the first time at Hi-Fi! Uses a large double power transformer and an original Motorola power transistor. Engineers who were in charge of design at Goldmund are in charge of production, and the sound field is large. It is an amplifier with a very high degree of perfection, with precise tone, medium and low frequencies with intonation, etc. The exterior has dullness, threads, etc. (YONEJIMA Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: power cord
Main specifications: 85W+85W (8Ω) 170W+170W (4Ω) W430 × D330 × H132 mm,22 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/20 sales price 348,000 yen ※The center cap has many wrinkles, so it's cheap. Woofer edge softening treatment! Comes with a dedicated stand DK-10000 sold separately. Diamond Tone 40th anniversary model DS-10000 klavier. A limited-edition model of 300 sets created by infusing all the sensibility of the company's engineers into a beautiful piano finish reminiscent of crafts. It is a masterpiece that pursues even the smallest sounds one by one. In addition to dullness and scratches on the exterior, there is a feeling of use such as dents on the scoker cover. Serial 13467 13468 (Hiroki Aso)
Maintenance Information: 2024.5.20 Maintained (woofer edge softening treatment)
Accessories: dedicated stand (DK-10000)
Main specifications: 3-way 3-speaker sealed bookshelf type usage unit/27cm aramid honeycomb curved cone type, 5.0 cm boron D.u.d. dome type, 2.3 cm boron D.U.d. dome type, 6Ω 35 Hz to 60000 Hz crossover 600 Hz/5000 Hz dimensions W360 x H625 x D290 mm weight 27 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/26 sales price 348,000 yen The current ELAC speakers have arrived! It firmly follows the merits of ELAC up until now, and shines with a higher degree of perfection than ever before. With an expanse that doesn't make you feel the presence of the speaker, and the sound is delicate and bright, it is a practical speaker regardless of genre. There is a small dent in the lower woofer on one side. Serial 31800E000053/31800E000056 (Takasaki Atsushi)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: instruction manual, jumper, spike holder, original box (cushioning material partially broken)
Main specifications: 2.5-way bass reflex type crossover frequency 450/2400 Hz frequency characteristics 30 to 50,000 Hz efficiency 88 dB recommended amplifier power 40 to 300 W rated input 130 W impedance 4 ohms W229 ✕ H1,000 x D266 mm 19.1 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
This is PLATANUS MC type phono cartridge. The connection from deep bass to high frequencies is good, and the playback ability is delicate and has a sense of density. You can honestly feel the vivid, dynamic sounds, and even the performer's emotions, and the records you've listened to over and over again until now will play richer and more beautiful music. Magnetic circuits are precision machined and integrated from large chunks of pure iron to enhance rigidity so that vibration energy from the needle tip to the power generation coil is not damaged. The printing has disappeared, and there are small scratches on the body, but the needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual
Main specifications: Playback frequency 10 to 50,000 Hz impedance 2.5 ohms dead weight 16 g
Maintained! This is a regular imported model from Yamagiwa. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays vintage speakers particularly well (Murakoshi Yoichi)
Maintenance information: 2024.5.28 maintenance (each SW/VOL cleaning, pin jack cleaning, lamp replacement, operation check)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
MM/MC phono equalizer from the handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J17346 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual, power cord, connection cord, power supply unit
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Maintained! 100V specification genuine Baes product. A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. The exterior has rust spots, paint deterioration, and unevenness on the front. Serial JBZ7419 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (TONE, MODE, INPUT, BAL etc. disassembly contact polishing grease applied. All push switch contacts are coated with abrasive grease. Mode switch, volume, balance volume contact cleaning. Electrolytic capacitor replacement. Panel lamp replacement. Panel peeling correction. ※Since the panel color is burnt, there is color unevenness with the correction part. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Both the interior and exterior have been maintained! Grey version of 4312MK2. A standard monitor that combines responsive, sharp monitor sound with delicate expressive power. You can enjoy the strong, punchy sounds of jazz, rock, soul, etc. The exterior is also completely painted with specially blended JBL gray paint, and the finish is beautiful. Serial J372-010877 J373-011514 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 maintained (exterior cleaning and touch-up saran frame painting and net replacement tweeter maintenance driver maintenance (magnetic circuit rust removal, gap cleaning, center adjustment, internal urethane replacement, grill and screw coating, rubber ring replacement) mid-maintenance (corn paper repair and coating) ATT cleaning unit detached)
Accessories: saran net
Main specifications: Onboard unit 2213H+104H-3+052Ti 3-way speaker replacement titanium dome tweeter bass reflex structure 93dB 6Ω W362 x H597 x D298 mm 20 kg
The price has been reduced. 2024/5/26 sales price 228,000 yen 2023/10 manufacturer maintenance completed! The flagship stereo power amplifier model with a KT120 push-pull configuration by Sun Valley. An output transformer with a bifiler-wound custom-made by Hashimoto Electric is used. It achieves both a wide range of sound that is pleasant to listen to. This is a powerful power amplifier that can make even vintage speakers sound with modern speakers. The exterior is dull (Hiura Katsuji)
Maintenance information: 2023.10.20 manufacturer maintenance (PT replacement with a brand new product, carrying out energization after returning the remodeled point to a normal state, measurement of voltage of each part and measurement of various characteristics, music playback test)
Accessories: power cable
Main specifications: used vacuum tube KT120 push-pull 55W+55W KT120 x 4 (TUNG-SOL), 12BH7A x 4 (ELECTRO HARMONICS), CV4003 x 2 W400 x H380 x D220 mm 32 kg
The price has been drastically reduced. 2024/5/24 sales price 248,000 yen Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. There are repair marks on the edge (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained (voice coil, grommet, tinsel, and connection terminal parts were polished, connected with aluminum solder, and improved contact. Edge crack repair)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
Full maintenance, such as internal and external maintenance, was carried out, and the finish was beautiful! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. Serial 55553L, 55553R (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (exterior repair/repaint) 2017.4.25 Maintained (exterior polishing/all coated woofer cone paper/unit frame paint chip putty repair grill dent correction/paint tweeter distortion and maintenance (edge deformation repair, magnetic circuit slit maintenance complete) unit detachment terminal replacement (banana plug compatible product) ATT cleaning capacitor replacement*Some capacitors before replacement Since it is difficult to remove, remove the wiring to check the remaining input/output waveform and balance, sound output check, frequency characteristic measurement check (~ 42 kHz)
Accessories: No accessories
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
Internally and externally maintained! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. There is a very slight dent in the tweeter grill, and there are repair marks on the side (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This is a spike specification. There are wrinkles on the exterior like wrap marks. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound is captivating. The exterior has been beautifully finished due to maintenance. Serial 32547 32298 (Murakoshi Yoichi)
Maintenance information: 2024.5.16 maintenance (exterior repair/cleaning, saran net cleaning, repasting, ATT cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
The disposal price has been reduced. Member prices are not applicable. 2024/5/27 sales price 248,000 yen maintenance completed! Genuine Electri 7CH high power multi amplifier Power amplifiers featuring high power of 200W each. Not only can it be used for AV surround and multiple amplifiers, but it can also be enjoyed as a normal power amplifier with sufficient driving power. The American sound is straight and has high instantaneous power. The exterior has noticeable line scratches and dullness on the front (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (card edge contact cleaning, excessive reviver cleaning, removal, disassembly, polishing, and resistance value check, mounting solder correction) 2022.11.4 maintenance completed (all amplifier board removal, card edge contact cleaning input and operation mode changeover switch cleaning FAN cleaning bias and offset check. (BTL mode check for each channel RCA and XLR input/output audio check)
Accessories: manual, power cable
Main specifications: each channel 200W/8Ω W440×H144×D483mm 25.4 kg
Maintained by the manufacturer! Yamaha's pre-main amplifier equipped with a floating and balanced amplification power amplifier using a MOS FET. A screw fastening system is used for the connection, and thorough consideration has been given to low impedance. Equipped with a phono equalizer with MC head amplifier. The smoothness and strength of the sound are perfectly balanced, and no source is selected from records to high-resolution sound sources. The appearance is good, with a slight dullness. There are a lot of scratches on the remote control (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Maintained (replacement of power supply related resistors, etc. in the main board and INPUT board. Operation check confirmation)
Accessories: remote control, instruction manual, power cord
Main specifications: output 90W+90W (8Ω) 150W+150W (4Ω) input 7 systems (phono MM/MC) dimensions W435 x H157 x D463 mm weight 23.4 kg
Maintenance has been carried out and deteriorated capacitors etc. have been replaced! A newly created power supply is included. Genuine RF MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive (Daiki Goto)
Maintenance information: 2023.6.24 maintained (new power supply manufactured because the power module is defective but cannot be repaired, all deteriorated capacitors replaced, pin jack deterioration replaced, gain changeover switch replaced due to poor contact, each gain readjusted, operation inspected, (there are no current problems with the module)
Accessories: copy of instruction manual
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
The price has been drastically reduced! 2024/5/5 sales price 218,000 yen A special edition model commemorating the 70th anniversary of JBL's founding. The latest version that has been refined over the traditional 4312 series. A 12-inch diameter woofer unit equipped with the advanced 4429 is used. It is an all-round speaker with a sense of energy and good range extension. The exterior is dull. Serial 3072/3073 (Yonejima Satoshi)
Maintenance information: 2024.5.5 sweep test is good
Accessories: saran net
Main specifications: 3-way bass reflex type 300mm woofer 125mm mid-range 25mm tweeter impedance 6Ω output sound pressure level 90dB frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/25 sales price 248,000 yen It now uses Alnico, which can be called premium, and the tuning that emphasizes musicality that is comfortable to listen to throughout the entire area makes a good impression. The visuals are also compact and elegant, and have a sense of luxury. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net, jumper cable
Main specifications: 2WAY sealed 35mm pure silk ring diaphragm tweeter 170mm Kurt Mueller cone woofer rated input 50W maximum input 150W output sound pressure level 87dB impedance 6Ω crossover 3,500 Hz playback band 40 to 50,000 Hz W224 x H380 x D319 mm 10.8 kg
The price has been reduced! 2024/5/31 sales price 178,000 yen Maintained! Second generation model of the famous P-300 series. The sharp, sharp, and exhilarating sound is alive and well. It also goes well with JBL, etc., and makes a powerful sound. You can enjoy rough sounds that cannot be experienced with current products. There are scratches and scratches on the exterior. Serial B8Y695 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 Maintained (output relays, film capacitors, electrolytic capacitors, semi-fixed VR, etc. replaced. Fixed due to fixed switch. ATT disassembly and cleaning. SP switch polishing cleaning. Solder correction. Card edge contact cleaning. Increase and tighten the output terminals. ※Bias and offset check adjustment. Output audio check. (*When using MAIN & REMOTE1 speakers, be sure to connect both speakers.)
Accessories: power cord
Main specifications: 150W+150W (8Ω) W445×H160×D355mm 25kg
Maintained in 2023. After all, the warm, and glossy sound quality is excellent for stringed instruments. It has a soft and vivid sound not found in transistors, making it perfect for listening for long periods of time. In addition to noticeable scuffs and paint peeling on the exterior and transformer area, dullness and a feeling of use can be seen. Serial F0800283 (Murakoshi Yoichi)
Maintenance information: 2023.7.23 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 25W+25W) input/output waveform confirmation sound output check performed gain VOL NFB switching SW disassembly contact refinement to prevent oxidation and sulfation grease coating input/output waveform confirmation distortion load test (1 kHz (25W+25W at sine wave 8Ω load) sound output test)
Accessories: copy of instruction manual
Main specifications: 50CA10 push-pull output 30W+30W W410 x H183 x H160 mm 13.8 kg
Maintained! A power amplifier with a separate name for the main part of the SQ38F series. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. SW/VOL disassembly contacts are re-polished, and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (8Ω load 1kHz 30W/30W), input/output waveform confirmation, sound output check performed.)
Accessories: instruction manual (copy)
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
Fully maintained! The main part of the SQ38F is an independent power amplifier, the famous MQ60. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. The exterior has dullness, small scratches, and paint peeling. Serial 473753 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 30W/30W) input/output waveform confirmation sound output check performed impedance switching SW gain VOL disassembly contact refinement oxidation and sulfidation prevention grease coating input/output waveform confirmation load test (1 kHz) (Sine wave at 8Ω load: 30W+30W) sound output test)
Accessories: copy of instruction manual
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
The price has been drastically reduced! 2024/5/23 sales price 198,000 yen ※This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve replacement. AC cord replacement Main bearing disassembly, bearing thrust replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing/added; nuts, metal washers, and rubber washers added. Running tests OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: No accessories
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
The A2500 is a tube type power amplifier kit that has been replaced with speaker terminals that are easy to use even for beginners. 6AQ8 for the first stage and 12AU7 for the phase reversal stage both use triodes. Since triodes are used across all stages, the sound is taut and bright, with excellent nude characteristics. The exterior has dullness over time, rust, and small scratches. Serial 560561 (Miura Kimiya)
Maintenance information: 2018.4.28 Maintained (printed circuit board resistor replaced. (Adjustment characteristics check OK) 2014.11.21 maintenance completed (input VR, vacuum tube socket, coupling capacitor, SP terminal, BIAS DC BAL, semi-VR, each deterioration exchange, adjustment, characteristic check OK)
Accessories: instruction manual
Main specifications: 6 RA8 push-pull 6 RA8 x 4/12 AU7 x 2/6AQ8 10W+10W W410 x H145 (with hood) x D190 mm 9.6 kg
The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso)
Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test)
Accessories: copy of instruction manual
Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
The price has been drastically reduced! 2024/5/28 sales price 178,000 yen This is the 683S2, the top model in B&W's new 600 series. The floating-mounted tweeter greatly contributes to vocal sound images that clearly emerge. The medium to high range quality, which has been further upgraded from the past, is attractive. There are scuffs and stains on the sides and edges. The spikes are out of stock. Serial 1404-0012333, 1404-0012334 (Fujisawa Yukishi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: saran net, rubber feet, jumper plates
Main specifications: 3-way 4-speaker floor-type playback frequency range 30Hz to 50kHz efficiency 89dB impedance 8Ω W320 ✕ H1,020 ✕ D370 mm 27.2 kg
The A3500 vacuum tube power amplifier has been refreshed by thorough maintenance down to the smallest details, such as volume disassembly and polishing. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. As for the exterior, paint deterioration and peeling can be seen on the transformer on one side, and there is a feeling of use such as dullness, small scratches, etc., and there is a dent in the hood. ※3-pole tube connection specification. 20W+20W (actual measurement) is output as specified by the manufacturer (Takasaki Atsushi)
Maintenance information: 2023.2.3 maintained (main tube (6CA7) replacement vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, complete disassembly of semi-fixed VR replacement power input gain volume, contact polishing, anti-oxidation/sulfation grease coating load test (8Ω load 1kHz 20W+20W) input/output waveform confirmation sound output check performed)
Accessories: copy of the manual
Main specifications: 20W+20W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
Maintained. DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. You can see a feeling of use on the exterior, dullness, rust, scratches, etc. (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (board peeling and re-soldering treatment, block capacitor 30/20/20 μF replacement, film capacitor 0.047 μF → 0.1 μF original, electrolytic capacitor 50 μF, resistance 1W → 1/2 W original replacement, BIAS readjustment/RCA jack and vacuum tube socket caulking repair. Operation check) 2016.2.27 Maintained (AC cord, cord stopper, input terminal, capacitor (47uF100V) resistor (47k, 270k, 470k, 1M) 1/2 w, replacement of 2 vacuum tubes (6550), bias adjustment)
Accessories: copy of instruction manual
Main specifications: tubular mono power amplifier using vacuum tube KT88/5AR4/6AN8A output 60W/140W W229 × H190 × D229 mm 11.5 kg
The price has been reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 operation confirmed
Accessories: power cord, connection cord, EP adapter, subway, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
Maintained by the manufacturer! Long-established Luxman compact vacuum tube type premain. The neat design and simple operability make you feel like it's a new era, but it has a sturdy finish that is warm and new, such as adopting a traditional OY type transformer. The sharp vacuum tube sound is attractive. There are line marks on the exterior and top surface, and dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.5.29 manufacturer maintenance (BASS, TREBLE volume replacement. Input selector switch contact cleaning, inspection of each part, general adjustment)
Accessories: remote control, power cable, original box
Main specifications: rated output 12W+12W (6Ω), 10W+10W (8Ω/4Ω) vacuum tube ECC83 x 1, ECC82 x 2, EL84 x 4, 3 input lines, Phono (MM compatible) 1 system frequency characteristics 20 Hz to 50 kHz W297 x H162 x D258 mm 11.5 kg