Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
Maintained. This is a heavyweight premain amplifier manufactured by PIONEER. Since they are only from the bubble period, large quantities of material were used, and they are highly cost-effective amplifiers. Even the smallest sounds are clearly reproduced, and the sound quality, which is both thick, shows how well crafted it was unique to that time. Overall there are small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (output relay replacement, master volume exchange, muting SW exchange, direct switch, etc., switch disassembly polishing grease application (input selector, recoup, loudness, tape 3, speaker switching SW), each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation. * (Additional note) Since the master volume is a replacement, it can be adjusted in detail when the volume is low to medium volume, but when the volume is raised and auditioned, the VR seems to be raised (12:00). (*When listening to a phono, the sound will not come out unless the EQ switch is turned on)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) 120W+120W (6Ω) 150W+150W (4Ω) power consumption 270W dimensions W420 x H162 x D435 mm weight 19.6 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/10 sales price 69,800 yen Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: output 45W+45W (8Ω, Class B operation) 10W+10W (8Ω, Class A operation) 20Hz-20kHz power consumption rating 190W maximum 300W external dimensions 436 x H144 x D323 mm weight 13.5 kg
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has scratches, line marks, etc. Serial 619097168 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Maintained (loading and clamp mechanism drive belt replacement. Front panel operation tact switch replacement. Optical system cleaning cleaning)
Accessories: No accessories
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
※Since there is no manufacturer, it will be handed over as is. CSE isolation regulator. AC is converted to DC, stored in a capacitor, and then the sine wave is amplified analogically. It is a low impedance constant voltage power supply suitable for load devices with high power consumption. The rated output is 500W, and the output frequency can be changed to 50, 60, 80, 100, and 120 Hz, and it also has a soft start function to reduce through lines and inrush current, so it seems useful. The exterior, paint deterioration, dullness, small scratches, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 continuity confirmed
Accessories: original box
Main specifications: outlet with 3P ground x 2 W328 x H176 x D433 mm 18 kg
Taok's popular 4-tier audio rack. Strong construction typical of TAOC. It tightens the tone of the audio system. The length of the pole has been changed from the original. Scratches are conspicuous (Daiki Goto)
Accessories: instruction manual
Main specifications: W600 x H920 x D520 pole length 350, 250, 200 mm weight 21 kg (actual measurement)
The price has been reduced. 2024/5/9 sales price 49,800 yen Woofer edge softening treatment! A classic model that uses carbon graphite on woofer cone paper. The high and middle ranges have a core yet are glossy, and the low frequencies are tight. It is a well-balanced speaker and is suitable for a wide range of genres. In particular, the vocals in combination with a vacuum tube amplifier are excellent. You can enjoy the enchanting diatone sound. As for the exterior, the frame has rust, scuffs, dullness, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.7 maintenance (exterior cleaning, edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed impedance 6 ohms, W380 x H680 x D325 mm, 21 kg
4530BK made by Shinkosha. Since there are many chips and scratches throughout, it is inexpensive. The D130 was mounted. Woofer with MA15 fastener! Powerful bass reproduction far exceeding size is possible with the rear loading horn type enclosure (Sasaki Shota)
Accessories: MA15
Main specifications: screw pitch 420 mm hole diameter 360 mm plate thickness 40 mm front baffle plate thickness 22 mm W600 x H1250 x D600 mm 56.3 kg (all measured)
Maintained! The mid-range α series uses an α-X balance circuit that blocks the effects of noise and distortion from the ground. The smooth, stretchy sound quality is attractive. Designed with CD playback in mind, the sound separation is good, and it is a classic premain that will keep you entertained regardless of genre. The exterior has rust spots, paint bald, etc. (Mizusaki Ryo)
Maintenance information: 2023.2.1 maintained (main amplifier output relay replacement, transistor and capacitor replacement, MM/MC, reckout switch disassembly, polishing grease application, solder main part repair, various volumes, switch cleaning, interior and exterior inspection cleaning, offset adjustment, operation inspection)
Accessories: copy of instruction manual
Main specifications: 90W+90W (8Ω) W448 x H160 x D441 mm 16.0 kg
The price has been reduced! 2024/5/9 sales price 49,800 yen This bookshelf is made in England using solid wood veneer for reinforced MDF. The plumpness of the low range has been handed down since the 12th era, and the low range, which has a rich sense of volume, is attractive when it is small. You can enjoy natural sounds suitable for vocals and classical music. The exterior has scratches and several dowels broken in places on the saran net. Serial 00342B (Yonejima Satoshi)
Maintenance information: 2024.5.9 sweep test good
Accessories: saran net
Main Specifications: Model: 2 Wave Reflex Type Crossover Frequency 2.2 kHz Output Sound Pressure Level 86 dB Rated Impedance 6 Ω Playback Frequency 45 Hz to 28 kHz W205 x H330 x D253 mm Weight 7.6 kg/book
The price has been reduced. 2024/2/20 sales price 49,800 yen 2-way bookshelf speaker system. It's the most compact speaker in the company's 600 series, yet it's second to none in terms of power and accuracy due to the new separate double dome tweeter and design improvements. It is in good condition (Sasaki Shota)
Maintenance information: 2024.2.20 sweep test good
Accessories: none
Main specifications: playback frequency 54 Hz to 50 kHz efficiency 85 dB impedance 8 ohm crossover 4 kHz dimensions W160 x H315 x D229 mm weight 4.6 kg
The price has been reduced. 2024/3/12 sales price 49,800 yen Maintained! Sony's highest-grade 5-channel vari-controlled FM stereo tuner at the time. Equipped with a FET, the treble extension is excellent, and it also has the thickness unique to varicones. The retro and simple panel design is also attractive. There are dullness, small scratches, etc. appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.12 Maintained (The inside of the main unit was cleaned and the wall escutcheon cleaned. The dial transmission part has been corrected due to thread entanglement on the dial flywheel part. RF section tracking, meter instructions, and MPX detection have been adjusted. (Reworked and corrected due to poor contact (glare) in the output level volume)
Main specifications: FM stereo tuner, reception frequency 76 MHz to 90 MHz, frequency characteristics, 20 Hz to 15 kHz, antenna terminal, 300 ohm balance, 75 ohm unbalance, W400 x H145 x D310 mm, 9.2 kg
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
The price has been reduced! 2024/5/8 sales price 45,000 yen ※Pedestal is out of stock. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator test is good
Accessories: instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
The price has been drastically reduced. 2023/11/8 sales price 49,800 yen ※The display panel moves when the volume etc. switch is pressed, but this is a specification. Maintained! MICROMEGA D/A CONVERTER It's a well-balanced European tune, and you can listen to chamber music and vocals smoothly. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintained (replacement of tantalum electrolytic capacitors, replacement of other capacitance electrolyzed capacitors. Various digital signal demodulation tests confirm normal operation. (Rubber foot replacement)
Accessories: none
Main specifications: 1-bit input sampling frequency 32kHz,44.1kHz,48kHz W220×H55×D110mm 1.5kg
Heater transformer spare sale primary: 105-115-125V secondary: 6.3V/5A (with CT) W49 × H69 × D45 mm 0.5 kg/piece (actual measurement, not including protrusions) with original box exterior, terminals It seems to be an unused item from the condition! (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2022/12/18 sales price 79,800 yen Columbia desktop gramophone Viva-tonal Grafonola. You can adjust the volume with the front fins. The sound box is equipped with No. 9. The exterior is in good condition, although there are some scratches and stains due to age, I think it is good considering the age (Kanai Hidetsugu)
Maintenance information: 2022.12.11 sound output confirmed
Accessories: none
Main specifications: Dimensions W490 (including handle) x H320 x D483 mm, weight 14 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (LED installation (original not available) poor power stage transistor deterioration, defective transistor in the board → replacement. Bias adjustment, operation check.)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The Fostex 20cm double woofer enclosure D-70 is a plywood cut service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in stereo magazines at the time, and this is not a genuine assembly kit. There is no difference in dimensions or material. Wiring, SP terminals, detailed instructions, etc. are not included. If you can understand it, and if you are a self-made person, how about DIY this summer!? *The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications:20cm Backload Enclosure for Double Woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight approx. 93.6 kg
Maintained by the manufacturer! A pre main amplifier with excellent cost performance. Even though it's an entry class. It has a thick, well-balanced sound and sounds well. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior is scratched and dull, and has a slight tobacco smell. Serial 9111550397 (Yamato Yuki)
Maintenance information: 2024.5.17 maintained (SP relay replacement amplifier board inspection loudness, source direct SW rework sound test)
Accessories: Power cable, copy of instruction manual ※ remote control missing
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz W434 x H134 x D407 mm 14.6 kg
※The veneer is peeling, the top plate is undulating, and the grill is indented, so it is inexpensive. This high CP model was released in the 49th year of Diatone's founding. It has a very well-balanced, rounded, and gentle tone. I can do everything from jazz and rock to classical and pop music as an all-rounder (Oikawa Tetsuji)
Maintenance information: 2024.4.15 Operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers, 6.3 ohms, sound pressure level, 90 dB, W380 x H680 x D295 mm, weight 25 kg
Comes with a glass base An all-in-one model that uses waveguide speaker technology to achieve an immersive and powerful sound like you would experience in a concert hall. In addition to CDs and FM/AM radios, you can wirelessly play music stored on your smartphone or tablet such as an iPad. Using your home Wi-Fi network, you can enjoy internet radio from around the world with just one touch. Operation and installation are simple and easy. It is in good condition (Oikawa Tetsuji)
Maintenance information: 2024.5.19 Operation confirmed (CD playback, remote control OK)
Accessories: remote control, instruction manual, power cable, FM antenna, glass base
Main Specifications: Wireless LAN: IEEE 802.11b/g/n Network Playback Sound Format: MP3, WMA, AAC, FLAC, Apple Lossless External Dimensions W368xH142xD221mm Weight 4.5 kg
Flat speaker with 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg [actual measurement)
Speaker with active servo technology A powered speaker with a built-in power amplifier in the woofer (only the woofer part requires a power source to drive). The medium and high frequencies, which are typical of Yamaha, remain the same, and the low frequencies also come out well. It has a good balance and can be used regardless of genre (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual
Main specifications: 4 way, 3 speakers, bookshelf type, W340 x H700 x D337 mm, 30 kg/1
The price has been drastically reduced! 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (check capacitors, resistors, transistors, etc. as is OK. bias check)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
A classic MC boost transformer. With 2 input systems, impedance can be switched to 3.40 ohms, and comes with a PASS line, you can freely enjoy various cartridges and tone arms (Takasaki Atsushi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
※Since there is no manufacturer, it will be handed over as is. PSE standard product. Once the AC power source is converted to DC, a new 60 Hz sine wave is created using the built-in transmitter to generate a clean power source. The output power is 100W. Recommended for use with low power devices such as preamps, CD players, analog players, etc. Comes with an earth polarity switching function. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: original box
Main specifications: output power 100W output frequency 60Hz dimensions W221 x H145 x D415 mm weight 12 kg
A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data. The condition is generally in good condition. *The included shell cartridge is out of stock. Serial 234198228 (Yamato Yuki)
Maintenance information: 2024.4.8 operation confirmed
Accessories: copy of the instruction manual, EP adapter, USB cable, phono cable (general purpose)
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/19 sales price 49,800 yen Maintained! Sony's highest-grade 5-channel varicon FM stereo tuner at the time. Equipped with a FET, the treble extension is excellent, and it also has the thickness unique to varicones. The retro and simple panel design is also attractive. There are dullness, small scratches, etc. appropriate for the model year. Serial 204747 (Tomoho Asaine)
Maintenance information: 2024.3.19 Maintained (power switch lever shaft repair. Adjustment of all items related to high frequency and MPX. The dial lighting and meter certification lamp were changed to LED. (Measures to prevent abnormal noise when the tuning dial is rotated, operation check)
Accessories: none
Main specifications: FM stereo tuner, reception frequency 76 MHz to 90 MHz, frequency characteristics, 20 Hz to 15 kHz, antenna terminal, 300 ohm balance, 75 ohm unbalance, W400 x H145 x D310 mm, 9.2 kg
※It smells like air freshener, so it's cheap. Marantz pre-main amplifier with excellent cost performance. The sturdy, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are unique to that time (Yasuhito Koshihama)
Maintenance Information: 2020.4.4 Maintained (Confirmation Symptom: The power does not turn on. Action: Power supply board repair correction. Fixed due to soldering deterioration in the main amplifier circuit and other circuit boards. Remote wire switch disassembly contact polishing. Bad output relay contact replacement. (I/O pin jack polish)
Accessories: none
Main specifications: 20W+20W (when grade A) 100W+100W (when AB grade) W454 x H165 x D380 mm 17.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
The price has been reduced. 2024/4/17 sales price 34,800 yen ※Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price. Inside Force Canceller B is out of stock
Maintenance information: 2024.4.13 sound output confirmed
Accessories: phono cable
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
※ The stylus is a genuine SHURE VN35HE. The lock on the needle cover doesn't work, so it's cheap. Good needle tip! It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
The Luxman selected tube set 12AX7 x 3/12 AU7 x 5 (with LUXMAN logo) 12AX7 is a GE print with the same structure as Siemens from the same period made in Yugoslavia, and the 12AU7 is a high-reliability type (6189) measuring instrument made by GE and seems to be an unused item due to the state of the tube measured by the TV-7 measuring instrument TV-7 made by GE! (KOJIMA Yosuke)
Accessories: original box, warranty card
*Currently sold. Woofer edge softened A model developed with an eye on the digital age. The natural spread of sound is suitable not only for vocals, but also for classical music, etc. This is a volume-input high CP model unique to the bubble period. The exterior has a saran net hole, and the emblem is missing on one side and the other side is missing. Also, the veneer is torn. Serial 2609/12502 (Yonejima Satoshi)
Maintenance information: 2024.5.5 maintained (woofer edge softening treatment, good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed, 32 cm for the low range, 10 cm, cone type/2.5 cm for the high range, dome type frequency band 35 Hz to 30 kHz crossover 600 Hz/5 kHz sound pressure level 91 dB impedance 6 Ω dimensions W370 x H680 x D330 mm weight 21 kg/book
The price has been reduced. 2024/2/23 sales price 35,000 yen KRK powered speaker equipped with a Class D power amplifier. The amplifier section is equipped with an equalizer to help adjust room acoustics (Sasaki Shota)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: power cable, original box
Main specifications: 2-way 145 W playback frequency band 42 Hz to 40 kHz input balance, standard jack W225 x H339 x D284 mm 7.6 kg
※The spikes are out of stock. A polymer composite material, which is an ideal damping material for the surface in contact with the speaker, is used to ensure isolation between the speaker and stand. Also, resonance is suppressed by making 1 of the 3 struts thicker and changing the resonance frequency. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: top plate W200 x D280 x H15 mm bottom plate W260 x D320 x 4 mm height 625 mm 6.0 kg per unit (actual measurement)
※Overall, there is dullness, rust, and scratches, and there is a feeling of use, so it is inexpensive. A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. (MIZUSAKI Ryo)
Maintenance information: 2024.1.27 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
F series tall boy speaker from British Celestion. It can be used for a wide range of purposes, from AV systems to pure audio. It is a bright tone with a pleasant drop and spread of the midrange. There is no effect on operation, but there is a dent in the mid-range center dome on one side. (FUJISAWA KOSHI)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual (English characters), saran net, spikes, jumper plates
Main specifications: 3-way bass reflex type output sound pressure level: 90db 8Ω W264 × H920 × D342 mm 20 kg
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book