Maintained by Accuphase Service! A core power amplifier representing the Accuphase in the mid-80s. Neat sound design, just like Accuphase. A highly complete car that harmonizes high resolution and thickness in an exquisite balance. It is a famous model that was used as a reference power amplifier for various FM magazines at the time. There are scratches on the side corner and front (Sasaki Shota)
Maintenance information: 2024.4.27 Maintained by the manufacturer (due to poor output relay contacts, both A/B were replaced with sealed types. Front, push button switch contact cleaning. Level volume left and right disassembly contact cleaning. (The meter and logo lamp were replaced, the carbon resistance in the power amplifier Ass'y was exchanged left and right, and internal inspection and cleaning characteristics were checked)
Accessories: manual
Main specifications: output 250 W+250 W (8 ohms) frequency characteristics 20 Hz to 20,000 Hz gain 28.0 dB load impedance 2 to 16 ohms damping factor 500 W 481 x H218 x D445 mm weight 33.5 kg
Refresh yourself with internal and external maintenance! A popular model with an eye-catching bright blue baffle. A titanium dome is used for the tweeter, and the sharpness in the high range is excellent. The sounds of rock, jazz, etc. are pleasant, and the sound is sharp and sharp while the bass comes out well (Sasaki Shota)
Maintenance Information: 2024.4.27 Maintained (exterior cleaning/touchup/waxed finish. Saran net cleaning/reattaching Tweeter cleaning woofer cone paper touch up ATT cleaning)
Accessories: none
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 22 kHz crossover 2 kHz/5 kHz sound pressure level 93 dB impedance 6 ohms dimensions W362 x H597 x D299 mm weight 20 kg/bottle
High performance digital premain amplifier! Despite its thin size, it is an amplifier that boasts a 200W output. Although it is a lower brand of NuForce, it has not lost in its high resolution and sense of silence. You can hear the natural texture of the source and a very speedy sound. There are no noticeable scratches. Genuine Fusion Coordination (Shota Sasaki)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: 200W x 2 (8Ω) input terminals: USB Digital, Coaxial Digital S/PDIF, Optical Digital S/PDIF, RCA x 1 system output terminals: Optical (up to 24 bit/192 kHz), Stereo RCA (Line out) USB sampling rate 44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz /192 kHz/352.8 kHz/384 kHz DSD: 2.8 MHz/5.6 MHz/11.2 MHz (MAC OS up to 5.6 MHz) W430 x H50 x D381 mm weight 7.5 kg
Maintained by the manufacturer! A cassette deck that can record and play back sounds that are actually straightforward and have little coloring. It is equipped with a calibration function that demonstrates the performance of the tape. There are footprints on the top plate and scratches on the corner (Sasaki Shota)
Maintenance information: 2024.4.27 manufacturer maintained (each SW, VR contact defect cleaning. Head, roller, guide cleaning, flywheel and flange cleaning lubrication. Recorded again. Tape running adjustment)
Accessories: copy of the manual
Main specifications: 3-head configuration, bias adjustment function, metal tape compatible, 4 tracks, 2 channels, frequency characteristics 20 Hz to 20,000 Hz, W500 x H130 x D350 mm, 8.3 kg
A rare, early-stage pottery model! It is an interesting speaker with a strong element of play, which is very popular as a second system as an interior decoration. The shape changes depending on the generation. There are small scratches over time, but there are no noticeable scars (Sasaki Shota)
Maintenance information: 2024.4.27 sound output operation confirmed
Accessories: nothing
Main specifications: Jordan Watts module, caliber 10 cm, single cone, full range, 8 ohm, W172 x H155 x D65 mm, 9.0 kg/book
SACD/CD player The younger brother of the X-01. Even though it's a younger brother, the sound quality is thin compared to the X-01, and it has a very high degree of perfection. Even though the sound is very clear, the texture does not fade, and the sound quality is well accompanied by a satisfying listening experience. Recommended for those looking for good esoteric sound. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: remote control, power cable
Main specifications: 2 analog outputs (XLR/RCA), 2 digital outputs (optical/coaxial) 5.1 channel, multi (I.Link), 1 system, word sync, 1 system, dimensions W442 x H153 x D353 mm, weight 23.5 kg
※It has a cigarette smell, so it's cheap. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. The exterior has dullness, scratches, etc. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)). (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: remote control, power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
※It's cheap because of the smell of tobacco and the remote control being out of stock. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. There are scratches and scratches on the exterior. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)) has been performed. (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
A unique structure in which ribbon-shaped conductors using 1.0m pair collet chucks for RCA cables are arranged spirally on the outside of SVPE insulation. As a result, there is no extra cushioning on the positive side and negative side. The resolution is high and the low-frequency expression is excellent. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
RCA cable 1.0 m pair 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
Maintained! This is the first AUDIO OF OREGON control amplifier to be in stock in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
Comes with original box! This model is a new reference for Technics' direct drive turntable systems. Stable rotation and reduced vibration are achieved by adopting a coreless direct drive motor. Please enjoy the moment of interacting with music through the rich sound of analog records with this model. On the exterior, the rubber mat is dull. Serial GF1FA0010072021 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: instruction manual, power cord, connection cord, original box, turntable seat, dust cover, auxiliary weight, shell, overhang gauge, cartridge mounting screw set, turntable mounting screw set
Main specifications: Direct drive turntable system (manual) rotation speed 33/45/78 rotation speed adjustment range ± 8/± 16% universal S-shaped tone arm static balance arm effective length 230 mm overhang 15 mm arm height adjustment range 0 to 6 mm needle pressure adjustment range 0 to 4 g (needle pressure direct reading type) 453 x H173 x D372 mm 18 kg
The price has been reduced! 2024/4/23 sales price 258,000 yen Maintained! Comes with a cabinet. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a scratch on the cabinet and a crack in the mounting plate. Serial JEB7808 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Maintained (panel peeling fix. Polishing grease applied to all push switch disassembly contacts. Rotary switch contact cleaning. Volume contact cleaning. Electrolytic capacitor replacement, panel lamp replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D390 mm 11.8 kg
Hi-Fi is in stock for the first time! This is the flagship model of the current KEF Reference series. The expanse of the dynamic sound field and natural sound quality that can't be imagined from this 205mm wide seems to make you forget that this speaker is a tall boy. The exterior, with abrasions and scratches on one side, is dull, and there is only a slight feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, spikes, original box
Main specifications: Unit used: 5 inch Uni-Q driver, 6.5 inch woofer x 4 crossover 450 Hz, 2.1 kHz 88 dB impedance 4 ohms W205 x H1,350 x D462 mm 60.2 kg
Speaker system with 2 French Suprabox field type full range 215EX units and 40cm woofers 400-2000EXC. It combines a sense of speed that makes it impossible to return to a permanent magnet, and an audible response. In addition to small holes scattered on the exterior and top plate, a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 sound output confirmed
Accessories: dedicated power supply unit, connection cable, power cable
Key Specifications: 2 way 3 speakers W600 x H1200 x D270 mm
The best model in the BAT series. Cut the area below 15 kHz that can be heard by humans as much as possible, and cut the coverage with the main speaker. It has a natural sense of spaciousness and a firm, strong axle, and a light impression that is easy to remove. Thick wooden cabinets, brass horns, and brass inverted conical spikes are used to ensure rigidity and beautiful form. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: original box
Main specifications: Drive system/bimorph polymer piezoelectric hail type drive (TAT drive) maximum rating/100V (however, test signals at 20kHz or higher are up to 20V) protection circuit operates on excessive input (returns to normal after a few minutes of turning off the power) impedance/infinity ~ 140Ω to 28Ω (DC ~ 20kHz to 100kHz) playback frequency band/ 18 kHz to 150 kHz or more (18 kHz or less with a hail structure and 0.1 μF capacitor (It has been cut steeply) Maximum output sound pressure/100dB/W/m, 5-step switching W110 × H70 × D100 mm 720g
The current studio monitor 4309 equipped with the latest sound technology has arrived. A ring radiator type compression driver similar to the higher-level model is used for the medium to high range unit. It is also highly capable as a desktop monitor. There are repair marks on the exterior and top plate, and a feeling of use such as dullness can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper, manual, original box
Main specifications: 2-way bass reflex type nominal impedance 4 ohms output sound pressure level 87 dB frequency characteristics 42 Hz to 30 kHz crossover frequency 1.6 kHz W260 ✕ H419 ✕ D227mm 11 kg
Orthophone mono cartridge. It's a cartridge that allows you to fully enjoy the heavy sound of a mono disc. Serial 022736 (Mizushima Itsuro)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: original box, needle cover
Main specifications: mono MC type cartridge output 3 mV impedance 100 ohms needle pressure 3.5 to 5 g dead weight 31 g
It is a 3-way center speaker tuned to best match the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
Volumio audio file music player transport. Equipped with the latest operating system Volumio 3, which has a unique Manifest interface that allows you to easily manage music content. The simple structure transmits digital signals naturally and cleanly to the DAC (Murakoshi Yoichi)
Main specifications: output USB 2.0 (PCM768kHz/32bit, DSD256), coaxial S/PDIF, AES/EBU (PCM192kHz/24bit), HDMI 2.1/HDCP2.2 (4K maximum 60 fps) connection terminals USB 3.0, 1 USB 2.0 system each, LAN, Wi-Fi, Bluetooth compatible services Airplay via Airport Sync, Spotify & Spotify Connect, TIDAL & TidalConnect, QOBUZ compatible plug-in YouTube, Squeezelite, Radio Paradise, Podcasts, Pandora, FusionDSP, Room Bridge, Soundcloud, Mixcloud W270 x H50 x D150 mm 1.14 kg
※It is inexpensive because the finger is curved. Audio-Technica headshell It is a classic model with stable popularity and high versatility (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
A compact and easy-to-use Orthophone digital needle pressure gauge. The operability is also simple, and it is possible to easily adjust the needle pressure with high accuracy (Mizushima Itsuro)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: instruction manual, original box
Main specifications: Equipped with auto power off function, measurement range 0.1 to 200 g (0.1 g units) W59 x H17 x D120 mm 68 g
A genuine headshell included with the Technics SL-1200mk7, etc. There is a slight chip in the screw hole (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: dead weight 8.7g
A genuine headshell included with the Technics SL-1200mk7, etc. There is a slight chip in the screw hole (Mizushima Itsuro)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: dead weight 8.7g
Maintained! It is a model that is small yet has a calm and glossy tone. A combination with European speakers is recommended along with the company's Pre-44. A slightly more modern taste than the 405 has been added. There is a feeling of use on the exterior, such as dullness, small scratches, and peeling paint. Serial Q078428 (Hiroki Aso)
Maintenance information: 2024.4.27 maintained (internal dismantling check, power Tr driver, Tr check, replacement of each C in the board, partial soldering, defect correction, bottom rubber foot mounting operation check)
Accessories: instruction manual copy input DIN terminal power cable (general purpose product)
Main specifications: 100W+100W W341×H115×D195mm 9.0 kg
Small diamond-tone 3-way bookshelf. It has a compact yet solid 3-way sound with a good balance from treble to bass. It has excellent value for money and is recommended for those starting out with audio or those looking for a subsystem. The exterior has a feeling of use such as dullness and small scratches. Serial 16122 16122 (Tomonori Asaine)
Maintenance information: 2024.4.27 Operation confirmed (confirmed that there is no edge deterioration)
Accessories: saran net
Main specifications: 3 way 3 speakers 90db W270 x H300 x D290 mm 4.0 kg (main unit only)
Maintained! You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. The exterior has a feeling of use, such as dullness and paint peeling. Serial 10904 10896 (Hiroki Aso)
Maintenance information: 2024.4.27 Maintained (center cap replacement, corn paper coating, edge damping agent applied)
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
Interior and exterior maintenance completed! English studio monitor with TANNOY HPD385 installed. It's deep and you can feel that the scale is wide, and the size is clean, so the room's layout will expand. The exterior has been beautifully finished due to maintenance (Tomoho Asaine)
Maintenance information: 2024.4.27 Maintained (exterior cleaning/repair
Saran net replacement unit maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, fastener polishing) unit detachment network maintenance frequency characteristic check ATT cleaning high range capacitor replacement (3.3 uf, 4.8 uf) 4 pin terminal contact cleaning)
Accessories: none
Main specifications: size W510xH769xD380mm weight 32.2 kg (actual measurement)
※It is cheap because it is in poor condition. Denon's MC cartridge used to be an introduction machine. The sound quality has a sense of transparency that extends smoothly from low to high frequencies without clogging. The famous DL-103 Yuzuri cartridge has a good balance of range, density, and volume. In addition to being dull on the exterior, there is a feeling of use such as the part number plate peeling off. Serial 6984 (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.3 mV internal impedance 40 ohms needle pressure 1.5 to 2.1 g special elliptical needle double structure tapered cantilever dead weight 4.5 g
An early SHURE camemo mark MM type cartridge. The mid-range push is strong and the sound quality is crisp and dry. In addition to being dull on the exterior, the needle tip is slightly to the right (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: MM output voltage 5 mV needle pressure 1.5 to 3.0 g dead weight approx. 6 g
It features a bright and tense American sound. This cartridge also has the same resolution as an MC cartridge, and is suitable for JAZZ and ROCK systems. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: needle tip 0.3 x 0.7 mil oval needle pressure 0.75 to 1.5 g
GOLDRING MM Cartridges The output voltage is high, easy to use, and the sound is rich in color and satisfying to listen to. The exterior has a feeling of use, such as dullness on the body (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: original box case
Main specifications: GYGER2 diamond needle model MM type 6.5 mV needle pressure 1.5 to 2.5 g (proper needle pressure 1.75 g) dead weight 6.3 g
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The needle tip is slightly turned to the right (Tomonori Asae)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. The exterior has a feeling of use such as dullness. Serial 1226 (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Asaine Tomoho)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. In addition to the exterior and finger tips being straight, you can also see a feeling of use such as dullness (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 9g
The company's standard grade cable uses high-purity OFC (oxygen-free copper/4N) as the 1.0 m pair of RCA cables as OAI7 conductors to achieve transparent sound. Recommended for the first step in cable tuning (Tomoho Asae)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
RCA cable, 1.0 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. There is a feeling of use such as dullness on the exterior (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
RCA cable, 1.0 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. There is a feeling of use such as dullness on the exterior (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
RCA cable, 0.5 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. In addition to dullness on the exterior, there is a feeling of use, such as the lettering on the sheath being slightly thinner (Asae Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Maintained by Denon Service! This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine (Sasaki Shota)
Maintenance information: 2024.4.26 manufacturer maintained (13 deteriorated TRs replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg
Maintained! A hit model during the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 212487 (Hiroki Aso)
Maintenance information: 2024.4.26 maintained (MUT switch, push slide, SW exchange, volume VR, sound replacement, speaker relay due to deterioration, 14 parts replacement, other input selector, cartridge selector, each SW disassembly contact, polishing grease application, etc., DC bias balance adjustment, each input/output sound output check)
Accessories: copy of instruction manual
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
※ Tweeter soft dome has dents on the rim, so it is inexpensive. Compact Excite series speakers. There is a sense of power in the sound unique to unit development manufacturers, and the sense of scale in the low range in particular is so majestic that the compact size is unbelievably large. As the sound progresses, the transparency of the sound increases, so the fact that you can keep listening is also attractive. There is a slight feeling of use such as small scratches. Serial 03573940/03573941 (Takasaki Atsushi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: saran net
Main specifications: 2-way bass reflex type 180mm woofer 27mm tweeter 4Ω 87dB frequency band 40Hz to 23kHz W205 x H350 x D290 mm 9.0 kg
Maintenance is being carried out in 2022. A reprint of Marantz's famous model 7. In addition to the good graininess of the sound and the glossy and rich sound quality, it brilliantly inherits the good quality of the mid-range. You can enjoy a feeling that transcends ages and genres. The exterior has dullness and scratches. Serial F020306 (Murakoshi Yoichi)
Maintenance information: 2022.3.22 maintenance (implementation of measures to prevent the rear input terminal and chassis earth from floating, hot side loosening, contact pressure correction. Clean each vacuum tube pin and socket contact. (Volume VR part ground wire deviation correction, wood case stop screw installation)
Accessories: instruction manual (copy)
Main specifications: used vacuum tube 12AX7×6 W455×H178×D261mm 8kg
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: case, needle cover, instruction manual
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2596 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2016 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
※Because it smells like tobacco, it's cheap. Maintained! Custom edition of the large power amplifier PA-70 from the STASIS circuit. Supported by a huge 700W toroidal transformer, the speaker driving power, which consists of a 90A power supply, is one of the best among domestic amplifiers. Fortissimo, which excels at delicate depictions but doesn't make you feel limited, is unique to this large amplifier. The exterior is dull and scratched. Serial 11179 (Fujisawa Yukishi) A
Maintenance information: Maintained on 2024.4.26 (bias part and constant current part semi-fixed VR, output relay, and damaged screws were replaced, additional installation due to lack of cable protector, solder crack correction, bias and offset adjustments, output sound check, dirt removal and cleaning)
Accessories: No accessories
Main specifications: rated output 225W+225W (8Ω) W435 x H200 x D421 mm approx. 28.5 kg