Standard model of the “COPPER Series”, the main line of the NVS with a 0.9 m pair of RCA cables. FURUTECH connectors are used. It features deep chiseled bass, high SN, and three-dimensional sound (Kojima Yosuke)
Accessories: original box, special pouch, instruction manual
The price has been reduced! 2025/12/19 sales price 598,000 yen Panel maintenance including fog removal! Modern vacuum tube premain amplifier. Vacuum tubes are used at all stages. The soft, glossy vocals are attractive. While firmly following the thickness and softness of traditional A sound images, it is also well compatible with modern sound sources. The plug ground part of the power cable has been cut off. The exterior is dull. Serial XB1421 (Jun Tamai)
Maintenance information: 2025.12.19 maintained (each SW, VOL cleaning (some remains due to scratches on the balanced rough contact plate) panel dismantling cleaning tube defective replacement input selector, push button LED replacement (original not available) pin jack cleaning operation check bonnet screw replacement)
Accessories: ※ Remote control is being arranged power cable (the ground part of the plug has been cut off.)
Main specifications: 75W+75W (2/4/8Ω) input RCA x 6 systems (internal phono MM/AUX switching x 1 system) XLR x 1 system power input RCA x 1 system W445 x H255 x D475 mm 35.8 kg
Maintained in 2021. The dust cover has been made brand new! A masterpiece model of a semi-auto player. The torque and braking power of the motor are excellent, and the stability of operation is impressive. The delicate and deep sound quality brings out the performance of the cartridge well. It has an auto lift-up function and is very easy to use. There is a slight feeling of use over time. Serial 90800158 (Yamato Yuki)
Maintenance information: 2021.10.25 Maintained (motor part removed, shaft and bearing cleaned and lubricated. Replace the tact SW of the operation unit and the electrolytic capacitor on the internal board with a new one. Resolder the board. Remove the area around the arm, clean each part after disassembly, replace the shaft bearing, inspect the internal lead wire, and reassemble. Dust cover hinge reinforcement bracket creation, hinge repair. Exterior cleaning, scratch repair, rotation speed check, operation test of each part, sound test)
Accessories: copy of the instruction manual, EP adapter
Main Specifications: Quartz Lock DD Drive Auto Lift Up Static Balance Type Compatible Cartridge Weight 2 to 12 g Needle Pressure Range 0 to 3 g W490 x H182 x D410 mm 14.5 kg
※Since the meter is defective on one side, it is inexpensive (there is a meter difference between the left and right, and the starting position is not at 0). Maintenance has been completed! The final model of Ampzilla. A representative American sound with strong, tight low frequencies! The dry, clean-sounding character is the perfect match for vintage speakers of yesteryear. This is a masterpiece machine that briskly drives famous speakers from JBL and Altec. The exterior is dull and dirty. The fuse holder has been replaced with a black one. Serial 104730 (Tamura Eiji)
Maintenance Information: 2025.12.3 Maintained (fuse holder replaced. Meter switch disassembly contact cleaning. (*The internal movement of the meter was poor, and the meter was disassembled, but repairs were not possible)
2022.5.12 Maintained (fuse holder lock claw adjustment. Replace the fuse. 0 point meter adjustment Offset voltage, idling current adjustment. (Other internal inspection voice check)
Accessories: No accessories
Main specifications: 200W+200W (8Ω) perfect balance configuration W445 × H178 × D229 mm 22.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/12/11 sales price 250,000 yen Maintained! This is the 2010 version of the SV-2. This time it will be the 211 model. Compared to the 2007 model, it has a plump and glossy sound like a vacuum tube amplifier. There are also 4 input systems, so it's easy to use. There are scratches and paint peeling on the exterior. (TAMURA Eiji)
Maintenance information: 2025.12.11 Maintained (input volume and function switch replaced. Installing the bonnet fixture. Vacuum tube pin cleaning. Solder correction. Bias check. Voice check for each input and output. Output approx. 9 W (8 ohms))
Accessories: instruction manual, power cable, bonnet
Main specifications: 4 input systems with volume W410 x D408 x H251 mm weight 35 kg
The disposal price has been reduced. Member prices are not applicable. 2025/12/10 sales price 450,000 yen The woofer, driver, and network have all been maintained! All refreshed, including exterior polishing, oil finish, and reattaching the saran net. The L200 is a home-use model designed with professional studio monitor specifications. It is a model that emphasizes sound quality and is highly praised by JBL enthusiasts. It has a good response and a lot of wild sounds, and I'm addicted to enthusiastic 60s hard bop and psychedelic 70s rock (Sasaki Shota)
Maintenance information: 2025.12.9 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement. Woofer maintenance: corn paper repair/coating, terminal cleaning/screw replacement. Driver maintenance: Magnetic circuit gap cleaning center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning, screw replacement)
Accessories: none
Main specifications: 2 way · 2 speakers · bass reflex system · floor type unit for low range · 38 cm cone type (LE15B) high range · horn type (LE85+HL91) network · LX16 impedance 8 Ω allowable input 100 W crossover frequency 1200 Hz W610 × H830 × D540 mm 66 kg/1
The price has been drastically reduced. 2025/12/15 sales price 1,980,000 yen Internal and external maintenance has been applied and brushed up! This is Tannoy's highest flagship model. A famous machine that has a majestic scale and an overwhelming presence, and plays high-quality playback sound from an elegant design that looks like a work of art. You can immerse yourself in the music without getting tired of listening. The high level of musicality, which is the opposite of current monitor speakers, is attractive (Sasaki Shota)
Maintenance information: 2025.12.15 Maintained (exterior repair/polishing/oil finish. Saran net cleaning/repasting, frame repair. Unit maintenance: low range side edge replacement/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning center adjustment. Network maintenance: frequency characteristics check, ATT part contact cleaning, low frequency capacitor replacement, faston terminal cleaning)
Accessories: key
Main specifications: coaxial 2-way front+backload horn crossover frequency 1,000 Hz efficiency 99 dB W980 x H1,395 x D560 mm weight 138 kg
Maintenance has been completed, including replacement of 31 capacitors, 2 transistors, 5 lamps, etc. The top Macintosh model in the golden age. You can enjoy the thick and bold Macintosh sound. Includes an easy to handle 5-band equalizer. An easy-to-use preamp that can be combined with speakers and power amplifiers of all ages. The exterior has minor scratches, dullness, etc. appropriate for the model year as a whole (Oikawa Tetsuji)
Maintenance information: 2025.12.20 Maintained (AC relay failure, AC cable deterioration, IC failure with single channel output, equalizer noise level difference → transistor film C defect, headphone relay failure, defective replacement with C value difference within the board. Motor parts SW, VOL dismantling and cleaning. Flat cable bad connector replacement. Pin jack cleaning caulking 100V specification)
Accessories: copy of instruction manual
Main specifications: input terminals Phono 1, 2, AUX, tuner, tape 1, 2, 3 output terminals PRE OUT1, 2, TAPE OUT1, 2, W406 x H138 x D330 mm 11.8 kg
Maintained by the manufacturer! Good condition with original box! A CD player system composed of 3 devices: CD drive unit LHH1001, D/A converter unit LHH1002, and remote control unit LHH1003. The biggest selling point of the early LHH series is a model with analog thickness and high rarity value. It's packed with appeal that current CD players don't have (Sasaki Shota)
Maintenance information: 2025.12.20 Marantz metropolitan area service has been maintained by the manufacturer (LHH1001F: 4 loading belts replaced. Pulley and cam, dirt cleaning. Replacement of 28 operation parts and tact switches, internal cleaning. LH H1002F: Internal cleaning, inspection of all substrates and solder deterioration areas. Remote control: check operation. There are places where the button is slightly out of touch, but repairs are not possible, so please leave it as is.)
Accessories: remote control, manual, original box
Main specifications: [transporter] W455 x H103 x D345 mm 14 kg [D/A converter] W455 x H103 x D345 mm 14 kg
The price has been drastically reduced. 2025/6/28 sales price 258,000 yen Maintenance has been completed, such as glass panel peeling correction, input board capacitor replacement, etc. Macintosh's classic preamp. It reproduces clear mid-range and glossy tones. This model should be used by music fans who enjoy all kinds of sources. The full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. Electri regular imported 100V specification. Dullness, rust, small scratches, etc. can be seen on the exterior, top surface, and metal plating parts (Kobayashi Hitoshi)
Maintenance information: 2025.12.16 maintained (short lead processing between switched pin jack internal terminals, operation check) 2025.6.28 maintained (each SW, VOL cleaning, lamp replacement, push button cleaning, pin jack cleaning, glass panel peeling correction, input board capacitor replacement, fuse replacement, operation check of each part (a little bit of equalizer gap remains))
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
The price has been drastically reduced. 2025/12/18 sales price 798,000 yen Diamond Tone 70th anniversary model. Using NCV-R made by blending and molding carbon nanotubes and several types of resins as the vibrating plate, it stands out for its high speed, good response, and excellent sound response. Using a unit made of the same material, the sound is attractive, and you can feel the natural texture and thickness of a full range. Serial BR8B283/BR8B284 (Takasaki Atsushi)
Maintenance information: 2025.12.18 sound output confirmed
Accessories: instruction manual
Main specifications: 2 way 2 speakers, bookshelf impedance, 4 ohms, efficiency 88 dB, playback frequency band, 38 Hz to 80 kHz, W270 x H473 x D289 mm, 17 kg
The price has been reduced. 2025/12/18 Sales price 798,000 yen Maintained using carefully selected parts such as vacuum tubes, electrolysis, block capacitors, etc. You can enjoy a glossy mid to high range sound with a high sense of transparency and a thick, exquisite balance. It's a model that has been over half a century since it went on sale for analog fans, but it's still one they admire. The lustrous, indescribable tone is an appeal that cannot be enjoyed on modern devices. There is a feeling of use such as a line scratch on the left side of the front panel, small scratches on the wood case, dullness, and dirt on the back. Serial 7-21677 (Murakoshi Yoichi)
Maintenance information: 2025.12.17 maintained (each switch and selector contact repair, vacuum tube ECC83 x 1, shield case replacement, replacement and addition of 3 50μF block capacitors, 200μF electrolytic capacitors and 5 others, vacuum tube socket and RCA jack caulking repairs. (*Operation has also been checked with AC 100 to 117 V)
Accessories: none
Main specifications: tubular control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, 7.5 kg
Comes with original box mono needle. This is the current model of the CG25 series, which is the original cartridge for Orthophone. It is Mark 2 with increased glamor typical of the company. It faithfully picks up the mono sound, and the tone is powerful and has a thick core. If you're a mono fan, you'll want to try it out at least once. This is a gem unique to Orthophone. serial 041166. The exterior is dull on the plate (Murakoshi Yoichi)
Maintenance information: 2025.12.16 sound output confirmed
Accessories: instruction manual, warranty card, needle cover, original box
Main specifications: MC type 1.5 mV impedance 2 ohms needle pressure 3.5 g dead weight 37 g
Maintained by the manufacturer! Comes with original box Technology cultivated in the higher-level model C-2850 was introduced into pure analog circuit AAVA volume control. Delicate sounds are expressed in a fresh manner, and the sound quality is full of transparency. The overwhelming quality at low volume is practical. The exterior is generally in good condition. Serial G7Y105 (Yamato Yuki)
Maintenance information: 2025.12.21 maintained (front panel internal indicator, glass cleaning input/output check OK, safety check/pressure resistance check OK)
Accessories: original box, remote control, instruction manual, power cable
Main specifications: 7 input systems (RCA x 5, XLR x 2) output 3 systems (RCA x 2, XLR x 2) size W465 x H150 x D409 mm 19 kg
Maintained by the manufacturer! Comes with original box This is a full change model that enhances the degree of perfection of all P-4100 circuits. The latest instrumentation amplifier system is used for the overall configuration, and it is equipped with a mode changeover switch that allows easy bi-amp or bridge connections, improving convenience. The sound of the traditional 4000 series, which has a wide range and high transparency, has been refined. It is generally in good condition. Serial P5Y422 (Yamato Yuki)
Maintenance information: 2025.12.21 maintained (front panel internal indicator, glass cleaning idling adjustment, input/output check OK, safety check/pressure resistance check OK)
Accessories: original box instruction manual power cable
Main specifications: rated output 90W+90W (8Ω) 180W+180W (4Ω) load impedance 2 to 16Ω (in stereo) input RCA1 system, XLR1 system speaker output 2 systems W465 x H190 x D427 mm 28.9 kg
silver type. It is a model that can be said to be the flagship of Macintosh. The heavyweight frame, the refreshing blue meter, and the braking power to drive lightly even the large speakers, and the rich, rich tone are just perfect! It's exhilarating to drive the woofer briskly. On the exterior, scratches and a feeling of use can be seen on the top plate. Serial CS2131 (Fujisawa Yukishi)
Maintenance information: 2022.1.22 maintained (power stage Tr check, driver board Tr deterioration, C deterioration, Gain VOL Gal, meter display lamp deterioration, C deterioration in power supply board → all replacement. MODE selector dismantling contact cleaning. Resolder and clean the connector pattern. Operation check)
Accessories: power cord
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Anniversary model for the company's 600 series. It is a floor-type speaker designed to reproduce sound that combines power, accuracy, and transparency. There are thin scratches on the sides and overall dullness can be seen. Serial 2045-0014577, 2045-0014578 (Fujisawa Yukishi)
Maintenance information: 2025.12.21 operation confirmed
Accessories: saran net, spikes, rubber feet, jumper plates
Main specifications: 3-way bass reflex type frequency response 48 Hz to 28 kHz recommended amplifier output 8 Ω without clip, nominal impedance 8 Ω (minimum 3 Ω) W320 x H1055 x D370 mm weight 24.1 kg (including pedestal part)
Full maintenance has been completed, such as replacing deteriorated parts, disassembling and polishing switches, etc. The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. This quality is a must-listen for record fans. Compared to lower models, it also has a good sense of SN where you can enjoy classical music. The exterior has a feeling of use such as dullness. Serial 823071541 (Tomonori Asaine)
Maintenance information: 2025.12.21 maintained (men volume dismantling cleaning balance volume exchange output relay, headphone relay replacement switch disassembly and polishing (input selector, reck-out, tone, filter, muting, tape) ⑤ main amplifier transistors (16 pieces), 33ZD diodes (2 pieces) replacement protector section capacitors (2 pieces) replacement tone circuit capacitors (4 pieces) replacement Power supply unit floating resistor exchange volume, switch cleaning pin jack polishing solder repair interior and exterior cleaning operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
MM/MC compatible A tubular phono equalizer developed with the aim of better analog reproduction. You can enjoy a warm, natural sound using a vacuum tube non-feedback amplifier and a CR-type equalizer. The impedance can be switched according to the cartridge. (TERASHIMA Yuya)
Maintenance information: 2025.12.21 operation confirmed
Accessories: manual, power cable, original box
Main specifications: MM/MC compatible 12AX7 (ECC83) x 2 W300 x H100 x D260 mm 4.8 kg
※ Y lug on one side is missing. The fixing bracket for the DBS unit is missing and cannot be fixed, so it is inexpensive. This is an excellent model that combines 1.8 m pair single-by-wire thickness with realism (Tamura Eiji)
Maintenance information: 2025.12.21 continuity confirmed
Accessories: none
Audio-Technica headshell. It is an attractive classic model with stable popularity and high versatility. There is a small paint drop on the top (Murakoshi Yoichi)
Maintenance information: 2025.12.21 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. (FUJISAWA KOSHI)
Maintenance information: 2025.12.21 continuity confirmed
Accessories: No accessories
Main specifications: 1 input system, 4 output systems, W160 x H65 x D95 mm, 530 g
The entry model for the OCB-1 series. PSE standard product The 2-pin x 6-port cable length is 2.0m, making it the perfect model for those starting out with audio or home theaters. There are no visible scratches on the exterior, etc., and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2025.12.20 Continuity confirmed
Accessories: none
Main specifications: W120×H60×D120mm 925g
Arrived after a long time! Maintained! This is a Millennium Evolution model with digital characters flowing on the front panel. A genuine Stellar product. This is a rare power amplifier that combines high performance with beautiful sound, and musicality can also be felt in the high resolution power unique to high-end models. There is a slight dullness on the emblem. Serial 30706366 (Yasuhito Koshihama)
Maintenance information: 2025.12.21 Maintained (replace 2 LR output relays that are causing contact deterioration. Since there is rattling inside the black box, the unit was tightened and tightened to the chassis. After the repair, operation and various characteristics were confirmed, running tests, and interior and exterior cleaning were carried out. Gain: 30.25db (L/R) Output: 36.0VRMS/8Ω/1 kHz (L/R) ・Frequency Characteristics: 20Hz ±0db ・( L/R) 20kHz ±0db (L/R) ・Distortion Ratio (1kHz/10W): 0l 0215% (L/R) Residual Noise: 0.25mV (Lch) 0.27mV (Rch) ・DC Offset Output-1.40mV (Lch) +1.31mV (Rch)
Accessories: power cable
Main specifications: 200W+200W (2 to 8 ohms) maximum 500W W440 x H173 x D410 mm 40 kg
Maintenance was completed in 2025/5, including disassembly contact polishing for lever switches and volume components! Lux's early transistor pre-main amplifier. The vocals stand out based on a faint warm sound, and you can feel the thickness of the mid-range. In addition to classical music, it is strong against old sound sources, and has an appeal not found in current models. The exterior has small scratches, dullness, etc. Serial 119957P (Jun Tamai)
Maintenance information: 2025.12.20 sound output confirmed
2025.5.13 Maintained (switch, volume, disassembly, contact polishing, input/output pin jack polish, power supply circuit and tone control circuit, deteriorated transistor replacement, electric circuit, DC adjustment, idling current adjustment)
Accessories: Power cable, copy of instruction manual
Main specifications: 30W+30W (8Ω) PhonO2 system frequency band 5 to 50,000 Hz W451 x H148 x D268 mm 10.5 kg
Each part, such as volume, has been dismantled, polished, and maintained, such as replacing deteriorated parts. The first model of the Sansui 607 series. It's one that makes me feel like it was built in a golden age. It has the strength of low-frequency extrusion and a sharp sense of dynamism, and you can fully enjoy the goodness of construction during the golden age. In particular, it shows its true value when it comes to playing records.
Maintenance information: 2025.11.13 maintained (power supply R circuit part, replacement master volume dismantling cleaning balance for resistance disconnection, bus, treble volume exchange switch disassembly and polishing (input selector, reck-out, tone, subsonic, ride ness, coupler, tape selector) output relay replacement power supply unit, resistance, diode replacement, solder repair pin jack polishing, interior and exterior inspection and cleaning, operation confirmation (notice matters) approx. In 20 seconds, the relay will work. There is a clicking sound when the volume is at minimum. (Adjustments have been made, but there may be a popping sound when the power is turned on)
Accessories: copy of instruction manual
Main specifications: 65W+65W (8Ω) W430 × H168 × D389 mm 15.3 kg
The price has been drastically reduced. 2025/11/22 sales price 79,800 yen Limited edition model commemorating the 80th anniversary of Stax's founding. Based on the entry-class “SR-L300,” it is equipped with an MLER oblong sound unit used in advanced models. Recommended as an introduction to electrostatic headphones (Ryo Mizusaki)
Maintenance information: 2025.11.22 sound output confirmed
Accessories: instruction manual, original box
Main specifications: Open air electrostatic type, sensitivity 101 dB/100 V, playback frequency band 7 Hz to 41 kHz impedance 145 kΩ, dedicated 5 pin terminal for input connectors, weight 486 g (including attached cable)
The price has been reduced. 2025/12/17 sales price 99,800 yen Maintained by the manufacturer! Line-only premain amplifier using EL34. The sharp sound of the EL34 tube is impressive. It has a glossy tone unique to tube amplifiers with a modern sense of range and good response. There is a slight dent on the front (Daiki Goto)
Maintenance information: 2025.12.17 Triode maintenance completed (JJ EL34 x 4 units were replaced, and various parts were inspected and maintained, including selector polishing.)
Accessories: manual, power cable
Main specifications: circuit type EL-34 ultra linear connection AB grade push-pull drive rated output 45W+45W (8Ω) SN-ratio 90dB vacuum tubes JJ EL34 x 4, 12AX7 x 1, 12AU7 x 2 speaker output terminals 6Ω/8Ω input 4 systems W330 x H150 x D315 mm 15 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/6/3 sales price 89,800 yen Manufacturer maintained! This is DENON's famous record player from yesteryear. This is a cost performance model of the DP-5000 that uses a direct drive servo turn tape and achieves a stable speed of rotation. Equipped with the SME3009S2imp, which is dedicated to light needle pressure but boasts excellent tracing performance, you can listen to record playback with a sense of stability.
Maintenance information: 2025.6.3 manufacturer maintained (capacitor and transistor replacement around the head amplifier. 33/45RPMSW, STOPSW, LEAF SW CLEANING Speed adjustment, operation test.)
Accessories: copy of the manual
Main specifications: DP-3000 servo type direct drive speed 33, 45 rpm 3009S2IMP: short arm for light needle pressure, static balance type, needle pressure 0 to 1.5 g, cartridge weight 4 to 9 g, DK-100 cabinet, Rawan material 70 mm, laminated plywood size W530 x H170 x D420 mm
Disposal price reduction. 2025/10/12 sales price 15,000 yen JBL straight short horn for 1 inch drivers. This is a standard horn used in various models. The paint is peeling off and there are small scratches (Oikawa Tetsuji)
Accessories: none
Main specifications: Orientation characteristics 90° (horizontal) 45° (vertical) throat diameter 2.5 cm, crossover frequency 500 Hz or more, total length 216 mm, 1.1 kg/1