An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The needle tip is slightly turned to the right (Tomonori Asae)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. The exterior has a feeling of use such as dullness. Serial 1226 (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
white collar! Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. The exterior is dull and there is a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping weight 8.2 g
Unspecified head shell. It is similar to the Technics SH-98D. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. In addition to the exterior and finger tips being straight, you can also see a feeling of use such as dullness (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 9g
Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. The exterior is dull and there is a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Main specifications: aluminum stamping weight 8.2 g
The company's standard grade cable uses high-purity OFC (oxygen-free copper/4N) as the 1.0 m pair of RCA cables as OAI7 conductors to achieve transparent sound. Recommended for the first step in cable tuning (Tomoho Asae)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
RCA cable, 1.0 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. There is a feeling of use such as dullness on the exterior (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
RCA cable, 1.0 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. There is a feeling of use such as dullness on the exterior (Asaine Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
RCA cable, 0.5 m, is a standard BELDEN line cable that clearly outlines the sound while clearly outlining the sound while having a firm thickness in the mid to low range. In addition to dullness on the exterior, there is a feeling of use, such as the lettering on the sheath being slightly thinner (Asae Tomoho)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
The price has been reduced. 2024/3/2 sales price 45,000 yen Marantz Primaine has an attractive thin and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers also go well together, so you can choose any music genre. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.3.2 operation confirmed
2023.12.3 Maintained by the manufacturer (Source Direct has gaps. No parts are available. Contact cleaning. Power switch movement correction (because it is not available). (Other operation checks)
Accessories: remote control, instruction manual, power cable
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
Power cable, 1.5 m, high purity, 3 scare, high quality 3-core shielded power cable, a model that boasts performance that exceeds the preconceived notions of 6NCU+OFC hybrid entry models (Tomoho Asaine)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: none
Audio-Technica headshell A lightweight aluminum headshell that is both easy to use and has high sound quality. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
Main specifications: aluminum dead weight 10g
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
An integrated SACD player equipped with the VRDS-NEO VMK-3.5-20S with a refined drive circuit design for the drive. The SN is good, and the sound quality is both high resolution and smoothness, so you can fully experience the power of modern audio. It is an excellent product that can also be used as a standalone DAC compatible with a maximum of 24 bits/192 kHz. There is a slight feeling of use such as scuffs on the exterior, the top angle of the main unit, and the back, and small scratches scattered on the remote control. Serial 220007 (Murakoshi Yoichi)
Maintenance information: 2024.4.24 sound output confirmed
Accessories: remote control, power cord, instruction manual
Main specifications: Playable disc SACD, CD, CD-R, CD-RW analog audio output RCA x 1, XLR x 1 digital audio output coaxial digital audio input coaxial, optical, USB-B word sync input format BNC W445 x H162 x D438 mm 31 kg
The price has been drastically reduced. 2024/4/25 sales price 278,000 yen Maintained! A stereo power amplifier limited to 200 units. The careful, natural, and delicate sound that can be heard for a long time, backed by artistic internal wiring, is the true essence of Wesugi amplifiers. Modern speakers also drive quietly and firmly (Yasuhito Koshihama)
Maintenance information: 2024.4.25 Maintained (*confirmed above, lots of dust and dirt* input volume replacement, solder correction, misalignment correction, vacuum tube pin cleaning mold, dirt cleaning, foreign matter removal, bottom plate mounting reversed* bias check output audio check (output approx. 40W confirmed)
Accessories: none
Main specifications: 40W+40W vacuum tube ECC83 x 1 ECC82 x 2 EL34 x 4 W365 x H232 x D310 mm 31 kg
Internal and external maintenance completed in April 2023! The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound. There are line scratches and some chips on the exterior. Serial 58110513, 58110531 (Yonejima Satoshi)
Maintenance Information: 2023.4.1 Maintained (enclosure polishing, oil/wax painting. baffle paint. Lattice repair/polishing/painting, lining replacement. Unit maintenance (edge replacement. (Corn paper coating) Unit detachable)
Accessories: saran net
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2016 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2596 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
It has been refreshed and maintained with attention to detail, from edge replacement and exterior repair to lattice lining replacement! The visuals of the antique lattice grill are eye-catching, and the SP-LE8T. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound. Serial 59060151 59060173 (Murakoshi Yoichi)
Maintenance information: 2024.4.4 maintenance (center cap dent repair)
2024.3.31 Maintenance (enclosure polishing, oil/wax coating, baffle painting. Lattice repair/polishing/painting, lining replacement. Unit maintenance (edge replacement, corn paper coating)
Accessories: lattice grill
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
※The tweeter is cheap because it has dents. A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals (Murakoshi Yoichi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: spikes, saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, anti-magnetic design, frequency characteristics, 35 Hz to 20 kHz, impedance, 4 ohms, output, sound pressure level, 90 dB, W237 x H1080 x D310 mm, 25 kg/book
The price has been drastically reduced! 2024/4/13 sales price 89,800 yen ※It is cheap because it has a tobacco smell. A network player compatible with Roon Ready and MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. It also plays DSD 22.5 MHz when used as a USBDAC. Since it also has volume, it can also be used as a digital preamp. The exterior has a slight smell of threads and tobacco. Serial 17Y0011 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cord
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
The price has been drastically reduced! 2024/4/13 sales price 69,800 yen ※It is cheap because it has a tobacco smell. It is a premain amplifier with a built-in USB DAC compatible with a maximum DSD of 11.2 MHz and PCM384 kHz/32 bit input. Adopts a dual monaural configuration/fully balanced circuit design that inherits the design philosophy of the UD-503. This one is enough, and it's a convenient dish. There are small scratches on the exterior. Serial 1710182 (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cable
Main specifications: 20W+20W (8Ω) impedance 4Ω to 8Ω frequency characteristics 10Hz to 100kHz W290 x J81.2 x D264 mm mass 3.7 kg
The price has been reduced! 2024/4/23 sales price 45,000 yen*Saran net is out of stock. A smash hit by ALR JORDAN. The sound quality is outstanding at this size. The impression is that the volume does not change from low volume to quite high volume, and the sound is on a large scale not typical of a small speaker. There are small scratches and dullness. Serial 25230149, 25230149 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: No accessories
Main Specifications: 2 Way 2 Speaker Sealed Usage Unit 11.5cm Metal Cone Woofer/25mm Soft Dome Tweeter Rated Input 90W Frequency Characteristics 70 to 30,000 Hz Impedance 8 Ω Output Sound Pressure Level 86 dB (2.83 V/m) Recommended Amplifier Output 25 to 150 W Crossover Frequency 2,800 Hz Enclosure Natural Alloder Material Finish (with Screw Holes for Brackets) Dimensions W137 × H220×D190mm weight 3.0 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/12 sales price 188,000 yen The successor to the company's hit model Silver8 debuted at Hi-Fi. The color is HGBK (high gloss black) with a sense of luxury. The low range, which is easy to handle yet has a sense of volume, and the clear mid-high range with a wide range are attractive. There are scratches and scratches on the exterior. Serial 700247, 700247 (Fujisawa Yukishi)
Maintenance Information: 2024.4.12 Operation confirmed
Accessories: instruction manual, spikes
Main specifications: 3-way bass reflex type crossover frequency 570 Hz, 3.5 kHz impedance 8 ohms allowable input 200 W efficiency 90 dB size W185 ✕ H1,000 ✕ D300 mm W252 x H1034 x D367 mm (base foot included) weight 20.0 kg
The sound of the shell, which determines the rich sound of the SPU called the “core of the MC cartridge,” is enhanced by blending wood powder and resin. It is a modern SPU that combines the softness and intensity of the classic series sound. It's very slightly leaning to the left. Serial 730862 (Takasaki Atsushi)
Maintenance information: 2024.4.20 sound output confirmed
Accessories: original box, needle cover
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude elliptical (elliptical needle) suitable needle pressure 4 g dead weight 32 g
Disposal price has been reduced (member price not applicable) 2024/4/16 sales price 25,000 yen This is a compact 2.1 channel speaker that can also be connected to a PC via USB. The control pod has 1 mini jack input system, making it convenient to connect to an i-pod, etc. The sound quality is a lively sound typical of Bose, making it fun to listen to music. Since it is a model announced in 2006, Windows 10 etc. are not compatible with USB input. There are some small scratches and dullness on the exterior. There is stickiness in the remote control unit (Yamato Yuki)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: power cable remote control unit
Main specifications: input USB input, mini jack input external dimensions speaker part W146xH225xD98,5mm woofer part W173xH218xD426mm weight speaker part 850 g, woofer part 8.3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/1 sales price 25,000 yen*Currently sold. There is only one sister aircraft to the famous SS-G7, so you can feel the breadth and depth of the sound. Although it is small, each sound is clearly expressed, and it goes very well with classical music. Overall, there is a feeling of use over time, such as dullness, scratches, and deformation. A tape is attached to the bottom corner. Serial 220604 220434 (Hiroki Aso)
Maintenance information: 2024.4.1 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, 8 ohms, 38 Hz to 20 kHz, 92 dB, W380 x H645 x D340 mm, weight 20 kg
Maintained by Denon Service! This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine (Sasaki Shota)
Maintenance information: 2024.4.26 manufacturer maintained (13 deteriorated TRs replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg
The price has been drastically reduced! 2024/4/17 sales price 69,800 yen ※It is cheap because it has a tobacco smell. Hi-Fi Man's planar drive headphones have a high resolution, and the low frequencies are clear and easy to listen to. The sound balance is flat and the high cushioning is also impressive. The exterior smells like tobacco and there are creases on the cable (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box, connection cable
Main specifications: planar drive impedance 50 ohms sound pressure sensitivity 83.5 dB playback frequency band 8 Hz to 65 kHz 505 g
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: case, needle cover, instruction manual
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
※Because it smells like tobacco, it's cheap. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
G-shell oval needle model from the Herman era. The glossy, rich, and heavy sound is an appeal that never fades. It is an eternal cartridge that fully conveys the appeal of analog (Yasuhito Koshihama)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
The price has been drastically reduced. 2024/4/23 Selling Price 298,000 yen Tannoy's hidden popular monitor speaker. The thick MDF enclosure is coated with a special dump material to suppress resonance. Tannoy's traditional 2-way coaxial sound is attractive, but the punchy sound that is a bit different from Arden and the like is attractive. There are small scratches and dullness throughout. Written in the instruction manual (Daiki Goto)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: instruction manual
Main specifications: 38cm coaxial 2-way bi-wiring compatible, 400W, 8Ω, 38Hz to 25kHz, 98dB, W550 x H840 x D440 mm, 49.6 kg
RCA cable, 1.0 m pair, 6N-7N hybrid conductor, twin core structure, thick and strong mid-range, this hidden name cable is recommended for vintage audio. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: No accessories
A model developed for the digital AV era by applying anti-magnetic treatment to the NS-10M. The clear high frequencies stretch comfortably with less color quality. It is useful for a wide range of applications, such as those who are worried about space and for subsystems. The exterior has scratches, small scratches, and a feeling of use. Serial 104369A, 104369B (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speaker sealed type 8 ohm sound pressure 90 dB W215 x H382 x D199 mm 7.0 kg
An original needle! This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission (Oikawa Tetsuji)
Maintenance information: 2024.3.31 operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
The disposal price has been reduced! (Member prices are not applicable) 2024/4/17 sales price 278,000 yen This is an advanced model of the company's SACD player with a beautiful blaster white body color. It has a higher fidelity tone than conventional luckstones, and the sound image with high instantaneous power, especially the elasticity in the mid and low frequencies, is attractive. On the exterior, there are scuffs scattered on the top plate and side plate. Serial G11100859D (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: SACD/CD player equipped with PCM1792 x 2 D/A converter W440 x H140 x D383 mm 15.5 kg
The price has been reduced! 2024/4/21 sales price 99,800 yen This is DALI's HELICON series center speaker. If you use the company's HELICON series and are considering surround, please give it a try. The exterior is dull. Serial 7660180 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: original box, saran net
Main specifications: 4Ω playback frequency band 49Hz to 27kHz W650 ✕ H210 ✕ D435mm weight 18.4 kg
The price has been drastically reduced! 2024/3/28 sales price 398,000 yen Electric has been maintained, including replacing a new windshield panel! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the appeal of the sounds of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is dull. Serial JLF1440 (Fujisawa Yukishi)
Maintenance information: 2024.4.24 Manufacturer maintained (various solder fixes on the driver board. windshield panel replacement Switch bezel fixing O ring replacement IC exchange. Capacitors were replaced at various other locations. Filter capacitor replacement. Other relays, transistors, etc. have been replaced, but please note that the pop noise of this unit is difficult to completely remove due to product specifications, so it can be heard slightly depending on when the power is turned on. Replace all front lamps. Lamp fixing grommet replacement There is a difference in meter runout when the volume is low, but when the output is raised by about 3/4, the difference is not very noticeable. Due to specifications due to individual differences in parts, improvements are difficult, so adjustments were made so that they fit at a position of approximately half a meter. Same confirmation and other inspections. *The VOL position is 05, which is the normal level of around 9 o'clock, but this is a specification. (If you are concerned, lower the CD level.)
Accessories: remote control, instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
The price has been reduced. 2024/4/24 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. The main unit is in good condition, but it is written in the instruction manual (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
This standard cartridge is particularly famous in the company's MC series. It has good stretch in the high range and a texture that feels good against the skin, has thickness and density in the mid-range, and it is a tone that makes you feel a sense of temperature (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 ohms internal impedance 3 ohms dead weight 7 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Comes with original box SPU synergy with the highest output in the SPU lineup. Using a G-shell containing neodymium magnets and zinc powder, it combines a modern, energetic sound with a rich sound typical of an orthophone. The stylus is good (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: original box
Main specifications: MC type output voltage 0.5 mV diamond oval needle frequency characteristics 20 to 20,000 Hz needle pressure 3 g dead weight 30 g
This model commemorates the 250th anniversary of J.S. Bach's death. Uses a 6N silver wire coil. It is a cartridge that excels in even more delicate spatial expression while retaining the feel of an orthophone. The know-how of the masterpiece Jupiter has been fully introduced, and the high cost performance stands out. The cantilever is slightly to the right, and there is a small scratch and dullness on the body (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: nothing
Main specifications: output voltage 0.45 mV frequency characteristics 20 Hz to 35 kHz internal resistance value 5 ohms, suitable elliptical needle pressure 2.5 g, dead weight 10 g