The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
The price has been drastically reduced. 2024/6/7 sales price 998,000 yen Maintained! A 4-way floor speaker made to order for the previous owner who was involved in Coral. It has an all-Alnico unit configuration, and the mysterious carbon-like diaphragm used in the driver, the 38cm carbon cone woofer, and giant magnet are unique things not seen in other corals. It has a strong and powerful sound typical of the company (Murakoshi Yoichi)
Maintenance information: 2024.6.6 maintenance (exterior repair/polishing/painting, rear baffle repair/painting. Driver maintenance: magnetic circuit gap cleaning center adjustment, sound absorbing material replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal installation, new wiring between units, rear terminal board mounting processing)
Accessories: none
Main specifications: 3 way 3 speakers 8 ohm crossover 300 Hz/4 kHz/13 kHz W620 x H1050 x D560 mm (main unit)
This is a 2-way bookshelf type speaker with high sound quality. The exterior, which is finished in a piano style, has a sense of luxury. The jumper cable on the back is also a strong product using a fairly thick wire. The sound quality is impressive with a low frequency range that you wouldn't think of as a bookshelf, and the center of gravity is low. The reproducibility of the piano was wonderful, and the feeling of use can be seen in the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 Operation confirmed
Accessories: saran net, jumper cable
Main specifications: 2-way sealed speaker unit/17cm Kurt Müller Korn for bass, 2.5cm pure silk soft dome rated input 50W maximum input 150W output sound pressure level 87dB impedance 6Ω crossover frequency 2,500Hz playback band 40Hz to 30kHz W219 x H350 x D290 mm 10kg/book
The price has been reduced! 2024/6/8 sales price 20,000 yen Hamilex (Hayami Kosan) glass AV rack with casters. It is also ideal for installing a flat screen LCD TV. Clear glass 12mm thick, silver pole The exterior has a feeling of use such as dullness (Yamato Yuki)
Accessories: none
Main specifications: W1050 x H538 x D45 mm 40.2 kg (actual measurement) 220 mm below 160 mm between shelves, total load capacity approx. 120 kg
The price has been reduced. 2024/6/8 sales price 498,000 yen This is AYRE's ambitious work that takes advantage of the characteristics of FETs and uses a perfectly balanced circuit configuration from input to output. A non-feedback type complementary circuit that combines the input stage of a cascade connection with the output stage of the source follower is used. You can listen to a sound with a natural feel that makes you feel the expanse of space. The exterior has scratches and dirt on the front, and there is a feeling of use such as scratches overall (Mizusaki Ryo)
Maintenance information: 2024.6.8 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) 100V specification W460 × H180 × D460 mm 43 kg
*The stylus is a SHURE VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.10 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: No accessories
Main specifications: aluminum alloy with a dead weight of about 8 g
The price has been drastically reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in a corner of a room. There is slight dullness throughout (Tomonori Asae)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Balance cable 1.0 m pair XLR cable using a huge network that is synonymous with MIT. The fact that the transparency is clearly increased is a word. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Manufacturer maintenance, including pickup replacement, is being carried out in 2022. A belt drive CD player equipped with a 24-bit fully balanced module DAC. This player is popular for its thick sound quality unique to belt drives and a natural tone with no sense of emphasis. You can enjoy vocals and classical music in high quality. You can see a feeling of use on the exterior, scratches on the top plate, marks, dirt, dullness, scuffs, etc. on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.1.13 maintained (spindle bell pick up replacement Assy shaft dismantling, cleaning, grease up inspection disc, confirm regeneration operation)
Accessories: stabilizer, replacement remote control
Main specifications: belt drive type CD player CD-R compatible audio output: XLR balanced RCA unbalanced digital output: coaxial (RCA) optical (optical) AES/EBU (XLR) W435 x H98 x D296 mm 10 kg
The price has been reduced. 2024/6/2 sales price 118,000 yen Maintenance completed! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
The price has been reduced! 2024/6/8 sales price 298,000 yen Maintained! A player equipped with a genuine SME 3010R black model for the 100th anniversary Centennial. This is a famous machine that perfectly matches the high sense of resolution unique to SMEs and the individuality of the supple TD126. The quietness of the floating suspension and belt drive and the analog sound with a low center of gravity are excellent words. The relatively compact housing, ease of use, and good balance in terms of sound quality are also attractive. The exterior has dullness and scratches. Serial 66529 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (replaced due to poor contact with the display lamp. Servo circuit electrolytic capacitor replacement. Cleaning between armweights and shafts. Clean the arm clamp area. Loosen and re-tighten the upper arm screws. Strobe mirror cleaning. Elevation belt and turntable belt replacement The PU cord ground wire has been repaired. (Arm operation, voice check OK)
Accessories: instruction manual, phono cable
Main specifications: belt drive, 33/45/78 rotation compatible, W505 x H170 x D395 mm, 14 kg, arm part: static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), adjustable needle pressure range 0 to 5 g
The disposal price has been reduced. Member prices are not applicable. 2024/6/4 sales price 498,000 yen upgraded product (green display on display). Jeff Roland's classic preamp. It's a supple, mature expression, and you can also listen to the sound of excellent quality. It is an excellent control amplifier that also has the great advantage of being easy to bring to your own favorite sound with accessories such as cables. There are stains all over the exterior, and there is a scratch on the front corner of the top plate (Kojima Yosuke)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, power cable, connection cable, conversion plug
Main Specifications: Input: XLR×5/Bypass XLR×1 Output: Main Out XLR×1/Record Out XLR×1 Preamp Part: W445 × H80 × D152.5mm 11kg Power Supply Unit: W445 × H38 × D122 mm 3 kg
Comes with a dedicated stand LS-500! Spirit is one of the most popular in the SX-500 series. Like Victor, who continues to preserve the natural sound, it makes acoustic instruments and vocals sound lustrous. There is a feeling of use on the exterior such as scratches and fading (Tamai Jun)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: dedicated stand jumper cable
Main specifications: Sealed bookshelf type Alnico unit, body size dimensions W270 x H455 x D255 mm, 12.5 kg, stand size W294 x H440 x D330 mm, stand weight 6 kg
The price has been drastically reduced. 2024/6/8 sales price 128,000 yen Sun Valley 6550 push pull The design imitates Macintosh amplifiers of yesteryear. The sound design is bright, energetic, and supple, and has excellent sharpness that is more responsive than a normal transistor amplifier. There is dullness, dirt, small scratches, and dullness on the metal part of the power cord (Murakoshi Yoichi)
Maintenance information: 2024.6.7 sound output confirmed
Accessories: power cord
Main specifications: 6550 push-pull rated output 40W+40W using vacuum tube 6550, EL84 x 4 (SOVTEK), 12AX7EH x 2 (electro-harmonix) 4Ω/8Ω compatible W430 x D270 x H200 mm 18 kg
USB cable The core model of the company's USB cable using a 2.0m S2AB Silver-Clad OFC conductor. If you switch from a general-purpose USB cable used for data, etc., you will be amazed at the three-dimensional, realistic, and dynamic sense of sound. Recommended for those who do not have an audio USB cable (Kojima Yosuke)
Accessories: none
Comes with original box and hex wrench Banana Plugs, Set of 4, Phosphor Bronze, Silver+Rhodium Plated Banana Plugs with a beautiful direct plating design. You can also increase the resolution with your own system
Accessories: original box, hex wrench
Comes with original box and hex wrench Banana Plugs, Set of 4, Phosphor Bronze, Silver+Rhodium Plated Banana Plugs with a beautiful direct plating design. You can also increase the resolution with your own system
Accessories: original box, hex wrench
The disposal price has been reduced! (Member prices are not applicable) 2024/6/4 sales price 268,000 yen Maintained! LUXMAN 70th anniversary signature model. The standard EL34 push-pull configuration has an OY transformer, and is designed so that you can fully enjoy the flavor of luxe stone. Using an unprecedented high-rigidity chassis, it also has an outstanding sense of luxury. This is a 90s vacuum tube premain with a good balance of range, thickness, and tone. There is a scuff on the front knob. Serial W51010230 (Hiroki Aso)
Maintenance information: 2024.1.13 maintained (2 output tubes replaced due to right channel bias, double channel drive stage socket replacement switch contact disassembly cleaning volume cleaning knob milling deviation correction vacuum tube pin cleaning bias adjustment output audio check, approx. 30W at 8 Ω load)
Accessories: instruction manual copy power cable
Main specifications: output 30W+30W (6Ω) phono (mm) 2.5mV/47kΩ vacuum tube EL34 (6CA7) x 4, 12AU7 x 4, 12BH7A x 2 W430 x H209 x D387 mm weight 22 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of instruction manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
Comes with original box and hex wrench Set of 4 Y lugs Oyaide's screw-fastening Y lug terminals are made in Japan with excellent processing accuracy. This is a high quality sound plug that provides a wider range and a sense of density. There is little feeling of use (Oikawa Tetsuji)
Accessories: original box, hex wrench
Main specifications: Dual screw clamp system, pure domestic copper alloy (RoHS compatible), pure silver plating (1.5 μm) + platinum plating (0.3 μm), inner diameter 8.0 mm, compatible cable diameter 4.0 mm
Set of 4 Y lugs Oyaide's screw-fastening Y lug terminals are made in Japan with excellent processing accuracy. This is a high quality sound plug that provides a wider range and a sense of density. There is little feeling of use (Oikawa Tetsuji)
Accessories: none
Main specifications: Dual screw clamp system, pure domestic copper alloy (RoHS compatible), pure silver plating (1.5 μm) + platinum plating (0.3 μm), inner diameter 8.0 mm, compatible cable diameter 4.0 mm
※The height is 35 mm. The popular ICP composite spike has arrived. It is a composite material made of hard material and soft material. Combining a stainless steel chip with a modern body is effective in preventing vibrations. (FUJISAWA KOSHI)
Accessories: none
Main specifications: hybrid cone spike diameter 35mm x H35mm
The disposal price has been reduced. Member prices are not applicable. 2024/6/4 sales price 780,000 yen A high-performance speaker that condenses the sound production of the multi-cabinet SYSTEM7 into a single cabinet. The balance between dynamism, wide range, and sense of sound localization is excellent. Another advantage is that it creates a sound that is less likely to be affected by the performance of the amplifier. There is a partial tear in the corner of the saran net, and there is a linear paint crack separating the top and bottom on the right side of one (Sasaki Shota)
Maintenance information: 2024.6.3 sweep test is good
Accessories: manual, spike, spike holder, cover
Main specifications: 3-way 4Ω frequency characteristics 29Hz to 22.5kHz 89dB W320 × H1040 × D460 mm 73 kg
※ Sub weight is missing. Dust cover hingeless design 5th generation of the SL-1200 series. This is a high-grade model manufactured to commemorate the 30th anniversary. Its accuracy and durability are outstanding among many players, and it features clear sound with clear outlines. There is dullness, small scratches, and threads on the dust cover (Daiki Goto)
Maintenance information: 2024.6.11 operation confirmed
Accessories: dust cover, EP adapter
Main specifications: manual quartz direct drive 33/45 rotation universal S-shaped tone arm static balance type needle pressure adjustment range 0 to 4 g W453 x H162 x D353 mm 11.7 kg
Equipped with an impedance changeover switch (LOW: 5 to 50 KΩ, MID: 40 to 100 KΩ, HIGH: 90 KΩ or more) that optimizes characteristics according to the input impedance of devices connected to a 1.0 m pair of RCA cables, a Valerie structure with all phase characteristics, and a high C/P model that employs many MIT patented technologies such as CVT couplers. (FUJISAWA KOSHI)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original box
Full maintenance from internal dismantling and all checks to transistor and capacitor replacement! It's an amplifier similar to the SE400S, but the output has gone up from 40W+40W to 60W+60W, and the sound quality with excellent extrusion and sharpness has revived the sound of the good old days. In addition to the exterior and input terminals being replaced, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (all internal dismantling checks, L/R co-power stage Tr negative side characteristic defect, Lch driver Tr characteristic failure → replacement, in-board bypass C · power supply C broken → replacement, offset VOL contact failure → polishing, check)
Accessories: Power cable (external product)
Main specifications: output bandwidth 3 to 20,000 Hz, 90 dB SNR power supply 100V, 50/60 Hz, power consumption 200W, output 60 W+60 W, W385 x H125 x D93 mm
*Currently sold. DENON's small compact speaker. There are no standing corners, and the mellow sound allows you to relax and enjoy the music without getting tired. There are stains and broken dowels on the exterior and saran net, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex, anti-magnetic design, 38Hz to 45kHz, 6Ω, 89dB, W202 x H344 x D255 mm, 6.2 kg
The price has been drastically reduced! 2024/6/8 sales price 1,480,000 yen SARASTRO from Canadian high-end speaker manufacturer VERITY AUDIO is in stock for the first time at Hi-Fi! The color has a piano black finish. The ribbon tweeter, which is also used in the company's higher-level models, reproduces the appeal of this unit up to 50 kHz without stress. The balance between the highly transparent and realistic sound details and the voluminous woofer section is exquisite. Adjust the low frequency by distance from the wall. Please enjoy the sound that is rich in scale. There is a slight scuff on the side and a scratch on the upper rear corner. Serial SM1031, SM1032 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: saran net, jumper cable, spikes
Main specifications: 3-way 3-speaker bass reflex type frequency characteristics 20 Hz to 50 kHz efficiency 93 dB impedance 8 ohms W280 x H1200 x D508 mm 135 kg
Set of 4 cone spike insulators short type insulators that suppress vibration and resonance in various devices. The tip is formed in a circle, and since it is an ICP material made of soft and hard material, it is hard to scratch furniture. (FUJISAWA KOSHI)
Accessories: none
Main specifications: ICP composite short type φ35mm×H18mm
Set of 4 Strong vibration countermeasures are taken due to the vibration control characteristics of the hybrid type material itself and the coupling effect of the stainless steel chip, and distortion is suppressed more effectively. (FUJISAWA KOSHI)
Accessories: none
Main specifications: hybrid cone spike diameter 35 mm x H30 mm
Set of 4 Strong vibration countermeasures are taken due to the vibration control characteristics of the hybrid type material itself and the coupling effect of the stainless steel chip, and distortion is suppressed more effectively. (FUJISAWA KOSHI)
Accessories: none
Main specifications: hybrid cone spike diameter 35 mm x H30 mm
Compared to the MK1 LP/cable demagnetizer, this brush-up model has a dramatically increased demagnetization effect! I dared to leave the protective sheet attached to the surface of the acrylic cover. The exterior is also good without major scratches (Oikawa Tetsuji)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W430 x H105 x D400 mm 9.02 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
※Inexpensive because it is in poor condition. Currently sold. This is a tall boy model of the Reference41MKII. The tuning focuses on the mid-range, so you can enjoy it regardless of genre. You can see a feeling of use on the exterior, holes in the saran net, peeling veneer, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 Operation confirmed
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, 10W to 150W, 20 cm cone type, 10 cm cone type, medium range, 1 cm dome type, W254 x H870 x D307 mm, 16 kg
The price has been reduced. 2024/5/24 sales price 35,000 yen Tannoy rectangular yoke type enclosure by Shinkosha, a popular manufacturer of domestic boxes. It is attractive because it is made to sound good. A 30cm unit adapter (detachable) is attached to the baffle surface, and casters are attached to the bottom (Murakoshi Yoichi)
Accessories: none
Main specifications: W597 x H108 x D37 mm weight 30 kg
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please go back and forth on the label side 1 to 2 times (Daiki Goto)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
4 pieces per pair Asada cherry cube base Improve sound quality by placing it under speakers, amplifiers, etc. (FUJISAWA KOSHI)
Accessories: case
Main specifications: Asada cherry blossoms, load capacity 50 kg/4 pieces, W34 x H34 x D34 mm, measured 48 g/piece
4 pieces per pair Asada cherry cube base Improve sound quality by placing it under speakers, amplifiers, etc. ※The blister is out of stock. (FUJISAWA KOSHI)
Accessories: none
Main specifications: Asada cherry blossoms, load capacity 50 kg/4 pieces, W34 x H34 x D34 mm, measured 48 g/piece
The price has been reduced! 2024/6/8 sales price 89,800 yen ※All 5 tier types with 2 tiers of CLEAR GLASS and 3 tiers of black. Spike specification In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is subtly curved and cut so that vibration components gather at the four corners. Although the exterior has a light feeling of use, it is good without noticeable scratches (Tomoho Asaine)
Accessories: none
Main specifications: inch step W600 x H850 x D475 mm from above shelves, 100 mm, 180 mm, 220 mm, 220 mm (actual measurement)
The price has been reduced! 2024/6/9 sales price 248,000 yen*It is cheap because it has a tobacco smell. The current premain amplifier was born as a model commemorating Denon's 110th anniversary. It is a model that uses high quality parts from the SX1 LIMTED and specializes in sound quality and functionality. It is also equipped with a digital input, and the USB-DAC is DSD compatible. It's delicate, has a sense of dynamism, and plays a higher level of sound. There are no noticeable scratches on the exterior. Serial J092000089 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: instruction manual, remote control, power cable, original box
Main specifications: 80W+80W (8Ω) speakers: load 4 to 16 ohms frequency characteristics 5 Hz to 100 kHz input: line input x 3, PHONO (MM/MC) x 1, EXT. PRE x 1, USB-B x 1, coaxial digital input x 1, optical digital input x 3 W434 x H182 x D450 mm weight 25 kg
Maintained by the manufacturer. The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There are abrasions on the exterior and volume, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (1 PSW rework, 12V relay, function SW replacement. (Amplifier board inspection, solder correction, operation confirmation test)
Accessories: instruction manual, power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible W434 x H180 x D478 mm 22 kg
Maintained in December 2019! An amplifier with excellent cost performance. It sounds great with a well-contoured sound at an affordable price. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior has scuffs on the sides. Serial 7117300736 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
2019.12.8 Maintained (main board soldered, adjustment relay replaced)
Accessories: Remote control instruction manual copy power cable
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz dimensions W434 x H134 x D407 mm weight 14.6 kg
Marantz pre-main amplifier. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good, although there are very few minor scratches on the top plate. Serial AUY15230905053 (Takahashi Nobuyuki)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, remote control, power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
*Lead wire is missing. An NR (Non Resonance) head shell with the shell body and plug part integrally molded. It has a structure where the main body is tightened from the top and bottom with a finger plate and cartridge, there is no need for a stop nut, and it comes with an overhang adjustment memory, making it easy to set up. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 10 g (actual measurement)
The price has been reduced! 2024/6/4 sales price 67,800 yen ※The remote control is out of stock, so it's cheap. Maintained! CD turntable player. The 1-bit DAC “High Speed Pulse Flow D/A Converter” developed in-house was adopted, and I have the impression that it is more detailed and smoother than the PD-T07 one generation ago. There is a feeling of use on the exterior, such as dullness and old scratches. Serial LK1004122 AS (Hiroki Aso)
Maintenance information: 2024.6.4 Maintained (after cleaning the focus lens, check the mechanical electrical system adjustment of the fixed servo mechanism part with a dedicated adhesive RF playback level of 1.5 Vp-p)
Accessories: none
Main Specifications: Turntable CD Player Dimensions W440 x H140 x D365 mm Weight 12 kg