The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
※Only 1 bottle is currently sold because it is cheap. Bookshelf speakers made in England. It features compact, tight low frequencies and stretchy mid-high frequencies. There are scratches, threads, and the smell of oil (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: 89dB 6Ω W210 × H380 × D220 mm 5.4 kg
The price has been reduced! 2024/4/5 sales price 500 yen The sound quality of only one 2.0m QED speaker cable feels thick and flexible throughout the entire range. You can use it regardless of genre. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
SAEC long-selling model with a 0.6 m digital cable. 6N ultra-high purity copper with excellent transmission characteristics is used as the conductor material, and transmission loss is reduced with accurate impedance matching (Tamura Eiji)
Maintenance information: 2024.4.4 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/5/5 sales price 9,800 yen. ※1 bottle only. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. There is a feeling of use such as peeling and scratching on the label (Mizushima Itsuro)
Maintenance information: 2023.5.5 operation confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
This is only the top plate part of the company's GT-9721. There are scratches, stains, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W1165 x H45 x D580 mm
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/20 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. You can see a feeling of use such as appearance, dullness, abrasions, scratches, stains, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 maintenance (DIN connector replacement, resistance in both other channels, capacitor replacement, each Tr all check)
Accessories: connection cable, power cable, instruction manual (copy)
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.20 Maintained (The mechanical fixing parts were manufactured and replaced in 1 pair. The clamper and loading belt have been replaced. The velocity coil has been repaired and corrected. (The tact switch on the operation panel has been replaced)
Accessories: remote control
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
Power transformer 1st order: 100V 2nd order: 220V-200V-180V-180V-220V/DC190ma, 6.3V-2.5V/3A, 6.3V-2.5V/3A, 6.3V-5V/3A, 5V/3A W102 × H77 × D86 mm approx. 3.2 kg (actual measurement, not including protrusions) There are scratches in places on the cover with the original box (Kojima Yosuke)
Accessories: original box
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
100mm pole (19mm diameter) set of 4 black color Please use it to add shelves or extend poles for Q4, Q4D, etc. There are abrasions and line scratches in places (Mizusaki Ryo)
Accessories: none
Key Specifications: 100mm length/19mm diameter optional pole
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Set of 4 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has scratches, threads, and dullness. There is also a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
※Since it is cheap, it will be handed over as is. Marantz 10cm full range speaker. There is no habit, and it makes a well-balanced sound from high to low frequencies. It doesn't take up much space, so you can set it up anywhere. The exterior has scratches, dirt, scratches, etc. Also, there is color peeling and partial deformation on saran. Serial MZ01748010115 (Fujisawa Yukishi)
Maintenance information: 2024.2.25 Operation confirmed
Accessories: saran net
Main specifications: 1 way, 1 speaker, bass reflex system, setting free type, rated input 35W, impedance 6Ω, playback frequency 50 Hz to 20 kHz, W230 x H150 x D150 mm
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
Output transformer sale push pull output 40W primary: 5KΩ secondary: 4-8-16Ω W84 x H119 x D79 mm 2.3 kg/piece No TANGO badge, there are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
Micro stroboscope It comes with an overhang gauge, so it's convenient to have one. There are small scratches and dents on the exterior (Yonejima Satoshi)
Accessories: No accessories
A network adapter that converts USB 3.0 to SFP (only compatible with 1 Gbps) SFP ports can be added to Windows PCs or laptops without wired LAN ports. There is a line scratch on the bottom. *SFP module and 5V power adapter are sold separately. (FUJISAWA KOSHI)
Accessories: original box
Key specs: https://www.oliospec.com/shop/shopdetail.html?brandcode=000000010613&search=USB-SFP&sort =
※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. It is an attractive amplifier with a maximum output of 100W during 4-channel operation, and the strength unique to commercial use. There is a feeling of use such as scratches and dullness on the exterior as a whole (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W x 4 (8 Ω continuous output) 100 W x 4 (4 Ω continuous output) 200 W (BTL 8 Ω continuous output) W480 x H88 x D417 mm weight 12.5 kg
Maintained! Even though it was an entry-class CD player at the time, I felt that it was well-made. You can enjoy clear, tight low range and high frequency sound with good visibility. Many abrasions can be seen on the exterior and sides, and there are also small scratches, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.10.30 Maintenance completed (servo mechanical disassembly, rail, pickup oilless metal rust removal polishing. Tray drive belt replacement. Optical lens cleaning (Output VR cleaning)
Accessories: remote control, copy of instruction manual
Main specifications: center mechanical mount system D/A conversion method advanced H.D.L.C advanced pulse D/A converter score digital filter W430 x H125 x D375 mm 12 kg
*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. The exterior is dull and has scratches. Serial 8043308382 (Yonejima Satoshi)
Maintenance information: 2024.1.4 operation confirmed
Accessories: No accessories
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H ✕ D370 mm, weight 2.9 kg
Output transparent sale push pull output 35W primary: 8kΩ secondary: 4-8-16Ω usage: 7189 app, etc. W82 x H72 x D82 mm approx. 1.6 kg/piece (actual measurement, not including protrusions) The plate is often scratched, printing is erased a lot, and there are paint floats due to rust in places (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
Set of 4 Use ICP damping spacers and IDS composites together as tuning goods to counteract speaker vibrations. *Cannot be used as a receiver for metal spikes. There are scratches and threads on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: diameter 35 mm x 3 mm (thickness)
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
Maintained! A pre-main amplifier with Class A operation that allows you to enjoy sharp sound. The moderate amount of extrusion is comfortable, and this model is suitable for jazz and rock. The exterior has small scratches and dullness appropriate for the model year (Daiki Goto)
Maintenance information: 2024.1.22 maintained (balance volume (replacement) replacement, output relay replacement, input selector, reck-out, MM/MC switching, MONO, loudness, CD direct switch disassembly polishing grease application, solder repair, other volumes, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) input 6 systems PHONO (MM/MC) quarter A amplification method using CD/PHONO direct switch W462 x H164 x D376 mm 14.3 kg
Power transformer primary: 100V secondary: 5V/3A, 2.5-6.3V/5.2 A x 2, 6.3V/3A, 360-400-450V/170mA W120 x H95 x D105 mm 5.3 kg (not including protrusions) There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji)
Accessories: fastener
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
2.6 m speaker cable sold per cable, 98 SCMC-OFC conductors, parallel multiple stranded wire type that uses 1 pair of strands, has relatively good treble range extension in the company's speaker cable lineup, and it is a cable that matches well with the overall softness of the sound (Kojima Yosuke)
Accessories: none
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
Special Feature = Hi-Fi Era Hardware and Software/Watching CD Software/Roundtable Discussion; Tone Arm Research/5 Channel Divider/Vacuum Tube Power Amplifier Measurement and Audition; WE-293A PP/WE300b PP/EL34pp/VT52pp/VT104 10E, 215/Listening Room/Published Circuit Diagram: Futterman NCP-1/OTL-1/S58.11.1 published. The photograph is a sample, so the actual product may be broken, written, etc.
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none