Pair tube earthquake-resistant military standard product special tube getter large triode tube with white box, measured IP value: 47/47 mA (the best standard IP value for this amplifier is 50 mA) *Sound is checked with a test amplifier, plate current values have been measured, and it has been determined that operation is good (Kojima Yosuke)
Accessories: white box
The price has been reduced. 2024/5/25 sales price 99,800 yen with 2447 exclusive horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: stand
Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/3/20 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. You can see a feeling of use such as appearance, dullness, abrasions, scratches, stains, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 maintenance (DIN connector replacement, resistance in both other channels, capacitor replacement, each Tr all check)
Accessories: connection cable, power cable, instruction manual (copy)
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
The price has been reduced. 2024/5/10 sales price 99,800 yen Maintained. professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. There is a feeling of use such as a scuff on the top plate. Serial Q002959 (Mizushima Itsuro)
Maintenance information: 2024.2.15 maintenance (internal Tr, C, R check, output phase correction resistor, DC IN± bypass C, gain setting C, CDS replacement within the INPUT photocoupler. INPUT VOL CLEANING Output cable XLR cannon attached)
Accessories: copy of instruction manual, power cable, speaker cable
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
The price has been reduced. 2024/2/20 sales price 49,800 yen 2-way bookshelf speaker system. It's the most compact speaker in the company's 600 series, yet it's second to none in terms of power and accuracy due to the new separate double dome tweeter and design improvements. It is in good condition (Sasaki Shota)
Maintenance information: 2024.2.20 sweep test good
Accessories: none
Main specifications: playback frequency 54 Hz to 50 kHz efficiency 85 dB impedance 8 ohm crossover 4 kHz dimensions W160 x H315 x D229 mm weight 4.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 1,600,000 yen ※This is a 50 Hz specification. Maintained! A new Studio Technik Dusch suspension on a glass turntable! Fonoico is also a nice setting at 155th in the Franz era. The sharpness, precision of contouring, and a very thick sound are just words. A world-class player who still grabs the hearts of many analog fans and never lets go. Enjoy sounds that can only be experienced with EMT. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Maintained (930ST: motor detached/lubricated, adjusted. Replace deteriorated forward phase capacitors with new ones. Speed adjustment brake felt replacement. Main bearing housing detachment, gasket replacement, bearing ball damage replacement, etc., sealant attachment assembly. Replace the motor bush with a new one that has deteriorated. Replace the deteriorated turntable anti-noise rubber belt with a new one. Replace the idler with a new one that has deteriorated. 155ST: Balance adjustment trimmer resistor defective replacement. NF gain adjustment trimmer resistor noise exchange. Foundation solder deterioration correction. audio measurements. SW/VR cleaning, coat processing. Left and right output adjustment. (Running test OK)
Accessories: power cord, manual (copy), oil, connection cable (1 pair each of XLR and RCA)
Main specifications: idler drive system aluminum die-cast turntable rotation speed 33 1/3, 45, 78 rpm W490 x H234 x D410 mm [tone arm EMT929] dynamic balance type needle pressure range 0 to 5 g [equalizer amplifier 155 st] frequency characteristics 40 Hz to 20,000 Hz input impedance 140 to 200 ohms output impedance 200 to 600 ohms [cartridge TSD-15 ] MC type output voltage 0.15 mV suitable needle pressure 2.5 g impedance 24 ohms
The price has been drastically reduced! 2024/5/9 sales price 39,800 yen D/A converter with a built-in “ES9038PRO.” This model has a compact design, is compatible with MQA, high-resolution, and DSD sound sources, and has excellent cost performance. Desktops etc. are the worst. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, AC adapter
Main Specifications: Input: USB/OPTICAL/COAXIAL/BLUETOOTH USB: 44.1 to 768 kHz/DSD64 to 512 OPTICAL/COAXIAL: 32 to 192 khz W100 x H62 x D192 mm Weight 0.58 kg
The A2500 is a tube type power amplifier kit that has been replaced with speaker terminals that are easy to use even for beginners. 6AQ8 for the first stage and 12AU7 for the phase reversal stage both use triodes. Since triodes are used across all stages, the sound is taut and bright, with excellent nude characteristics. The exterior has dullness over time, rust, and small scratches. Serial 560561 (Miura Kimiya)
Maintenance information: 2018.4.28 Maintained (printed circuit board resistor replaced. (Adjustment characteristics check OK) 2014.11.21 maintenance completed (input VR, vacuum tube socket, coupling capacitor, SP terminal, BIAS DC BAL, semi-VR, each deterioration exchange, adjustment, characteristic check OK)
Accessories: instruction manual
Main specifications: 6 RA8 push-pull 6 RA8 x 4/12 AU7 x 2/6AQ8 10W+10W W410 x H145 (with hood) x D190 mm 9.6 kg
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2024/3/11 sales price 80,000 yen The MEDIUM/LONG knob doesn't work, so it rotates idle, but it's a specification. QUAD tubular AM tuner. It is designed to take power from QUAD 2. Also, although the meter is an overseas specification, it is a domestic band specification. ※This is a mono specification. In order to play on 2 channels, it is necessary to connect the pin jack to the RADIO 2 terminal of QUAD2 and press the MONO and STEREO switches simultaneously (Daiki Goto)
Maintenance information: 2024.3.11 Maintained (・AM antenna ASSY added/IF/RF readjusted*Other operation checked. *When tuning with TUNE, the LCD on the right edge will open. After tuning in, it is common to listen on WIDE RANGE. Also, since the LONG WAVE circuit in this model has been removed, the LONG/MEDIUM selector is invalid and the knobs are dummy.)
Accessories: antenna cable
Main specifications: W270 x H95 x D15 mm 2.6 kg (actual measurement)
Maintained! NAKAMICHIN's pre-main amplifier is in stock for the first time in a while. Simple design like an English amp. The thick, energetic sound typical of Nakamichi is attractive. The exterior has dents, dullness, and small scratches on the top plate. Serial 07436 (Yonejima Satoshi)
Maintenance information: 2024.5.31 Maintained (power switch replaced. Output relay replacement. (Switch and volume contact correction)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) equipped with Phonomm/MC W430 x H125 x D360 mm weight approx. 15.0 kg
※Shipping service. Special Feature = Latest Analog Player Audition Report 1/20 Commemorative Special Event “Unforgettable, Famous Analog Devices and Masterpieces” /Listen to Hot New Speakers/Talk About the Appeal of Ashkenazi Analog Records/Sound the Famous Machine “SONY SS-AR1” /Listen to the Full Technical Brain System/Test US RGPC Power Enhancer/Test the Power Supply Enhancer by Type, New Generation Model Edition/H20.7.20 Published /Model: MAJIK LP12/TD-550BC/RPM 9.1/VPS PL-L/Aurora/Ultra Eminent BC/HAMP30 HAMP05/A-S1000/TT-15S1/VPI Aries Scout/Solid Machine/Ambient with Unify9/Orbese-Unv1/System SG2 Phantom/LS3 5A/MSM-1/AM-105i/SX- M3/G2000/G1 GIYA/T-88/IA21/XM-300B/CA-03L/8834M/M-3BC M-A3S/MFSL-C3.5/AT-OC9ML 2/PH3D/excesioAle opus/ The photograph is a sample, so the actual item may be broken and there may be writing etc.
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Digital cable 1.0m RCA terminal It uses a titanium-containing sheath, OFC (oxygen-free copper) wire, gold-plated contacts that are resistant to aging, and a sturdy metal pin plug with strong reliability. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2023.7.20 Conductivity confirmed
Accessories: original box
The price has been reduced. 2024/5/23 sales price 22,800 yen. Set of 4 large insulators The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
*Currently sold. DENON's MC type cartridge boost transformer. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type) with a single arm. Also, since it uses a transformer designed for the DL-103 and DL-103S, it fully demonstrates the capabilities of the models described above. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz dimensions W51 x H53 x D181 mm weight 0.65 kg
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
Maintained in March 2024! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. As for the exterior, there is a scratch on the top plate. Serial 611088582 (Tomonori Asane)
Maintenance information: 2024.3.21 maintained (tone and other switches dismantled and polished with grease applied (turnover, subsonic, muting, loudness, processor, input selector, reck-out, power supply direct, source direct, tape, MM/MC changeover switch), power amplifier, power circuit transistor, resistor, adjustment volume, diode replacement, solder repair, each volume, switch Cleaning, output relay, headphone relay replacement, DC, bias adjustment, interior and exterior inspection cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
Comes with original box First arrival at Hi-Fi Hall. Headphones with a focus on sound and design. You can enjoy it regardless of genre with clear lines of sound. It is characterized by being comfortable to wear without the impression that it is being compressed. It is in good condition (Sasaki Shota)
Maintenance information: 2024.6.2 operation confirmed
Accessories: manual, original box, connection cable
Main specifications: diamic sealed 40mm driver frequency characteristics 20 to 22 kHz impedance 30 ohms cord length 1.2 m 230 g
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
Choke transformer 0.9 H/260 mA DC resistance 26.8 ohm (actual measurement) choke transformer mounted on A3600, etc. W55 x H71 x D50 mm 0.7 kg (actual measurement, not including protrusions) There are scratches and paint peeling in places (Kojima Yosuke)
Accessories: none
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
Maintained! One of Sansui's few 2 to 4 way NF type channel dividers. It is a channel divider that pursues basic characteristics and multiple functions, and features a highly saturated tone that is close to JBL speakers. After adjustment, the ceiling panel is clean and the design is excellent. There are scratches and scratches on the exterior. Serial 238070032 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (mode selector disassembly contact polishing. Frequency selector x 6 disassembly cleaning Other volume cleaning. (Replace diodes and transistors to enhance power supply)
Accessories: front panel
Main specifications: 2/3/4 way NF filter channel divider with SNR 90dB or higher cutoff frequency (± 10%) [F1] 60/75/95/120/150/190/240/300/380/480/600/750/950/1.2k/1.5k/1.9k/2.4k/3kHz [F3] 1.5k/1.9k/2.4k/3k/3.8k/4.8k/6k/ 7.5K/9.5K/12K/15kHz low star function installed (turnover 60 Hz/100 Hz) W482 x H88 x D305 mm 6.4 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. It also has good efficiency, so it's easy to play, and it features a chic design with a shiny mirror piano paint. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
※ Because it is cheap, it is currently sold. JBL 2-way speaker. It is a large, well-balanced model that is easy to use. It is also recommended as a speaker for BGM in stores, etc. On the exterior, there are stains and adhesive marks on the edges. Also, there are some holes on the sides. Serial 121213353121213 (Yonejima Satoshi)
Maintenance information: 2024.5.19 sweep test good
Accessories: grill net
Main specifications: W152 × H232 × D140 mm 2.5 kg
The disposal price has been reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2024.6.7 sound output confirmed
2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, slip stud installation, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/application of dumping agent, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removes aluminum seals that do not require unit detachment Treatment to prevent idling, re-fix the unfixed coils inside the treatment with silicon ATT contact cleaning. An exchange frequency characteristic measurement check (~ 42 kHz) is performed because the wiring is broken at the base of the resistor, and the original capacitor is continuously used to confirm the input/output waveform and balance for good results, check the sound output)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
*Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
Maintained! An eye-catching diamond-tone power amplifier with a rugged design. The extrusion of the mid-range is clear and the sound is slightly firm, but the sound is good, so it seems to go well with jazz and rock. There are small scratches and dents on the exterior as a whole (Mizusaki Ryo)
Maintenance information: 2024.6.1 Maintained (replacement of deteriorated transistors and capacitors in each circuit. Input volume and output relay contact correction. Electric circuit adjustment)
Accessories: copy of instruction manual
Main specifications: 2 mono construction system 100W+100W (8Ω) W425×H170×D285mm 16.5 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
The price has been reduced! 2024/5/16 The CD mechanism has been replaced with Denon at a sales price of 35,000 yen! Denon design series CD player. It is equipped with an inexpensive yet highly accurate D/A converter that is compatible with MP3 and WMA files. Since it can also be used vertically, it is attractive that it is easy to adjust where it is placed. The exterior is dull and has small scratches. Serial ADR 27190603014 (Tamura Eiji)
Maintenance information: 2024.5.16 manufacturer maintained
Accessories: remote control, power cable
Main specifications: analog output x 1, coaxial digital output x 1 size W200 x H86 x D 240 mm, weight 2.4 kg
※Since it is cheap, it will be handed over as is. The design is reminiscent of the Technics SL-1200 series, but I recommend this model for those who want to enjoy functionality and a little bit of fun on their own. It can be used by a wide range of people, from beginners to DJs. The exterior is dull and there are small scratches on the dust cover. Serial C410000041 (Kimiya Yonejima)
Maintenance information: 2024.6.5 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: quartz lock brushless servo motor, rotation speed 33, 45, 78 rpm, arm weight 12 g to 17 g (including headshell) size W450 x H157 x D352 mm weight 11.3 kg
High output type. You can easily enjoy the delicate sound of MC cartridges without a step-up transformer. The thick mid-range, and the instantaneous, and light sound is attractive. Serial 4875 (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box
Main specifications: high output MC type, output voltage 1.6 mV, needle pressure 1.5 to 2.1 g, playback frequency band 20 to 45,000 Hz, load resistance 47 kΩ or more, internal impedance 160 Ω, needle tip 0.1 x 0.2 mm square solid, special elliptical needle, dead weight 4.8 g
The price has been drastically reduced! 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (check capacitors, resistors, transistors, etc. as is OK. bias check)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but the location mechanism that allows you to move it to the desired position and play is convenient, so you can easily enjoy analog. There is a feeling of use such as button corrosion and dullness (Daiki Goto)
Maintenance Information: 2024.5.25 Maintained
Accessories: M44G, EP adapter, instruction manual
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg