Maintained! LUXMAN 70th anniversary signature model. The standard EL34 push-pull configuration has an OY transformer, and is designed so that you can fully enjoy the flavor of luxe stone. Using an unprecedented high-rigidity chassis, it also has an outstanding sense of luxury. This is a 90s vacuum tube premain with a good balance of range, thickness, and tone. There is a scuff on the front knob. Serial W51010230 (Hiroki Aso)
Maintenance information: 2024.1.13 maintained (2 output tubes replaced due to right channel bias, double channel drive stage socket replacement switch contact disassembly cleaning volume cleaning knob milling deviation correction vacuum tube pin cleaning bias adjustment output audio check, approx. 30W at 8 Ω load)
Accessories: instruction manual copy power cable
Main specifications: output 30W+30W (6Ω) phono (mm) 2.5mV/47kΩ vacuum tube EL34 (6CA7) x 4, 12AU7 x 4, 12BH7A x 2 W430 x H209 x D387 mm weight 22 kg
Maintained by the manufacturer! Remote control is missing. The highest-end model of Denon's integrated CD player. The relaxed low range makes you feel analog sound quality. The operation of loading a stabilizer with a strong sense of weight is unique to top loading. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 6031501867 (Hiroki Aso)
Maintenance information: 2024.6.4 maintained (tray opening/closing SW disassembly, contact cleaning laser pickup RF level check (however, repairs will not be possible if sound skips in the future or failure such as not reading TOC due to the disc), inspection of each part, operation test)
Accessories: instruction manual stabilizer original box
Main specifications: 2 analog outputs, 3 digital outputs, 2 digital inputs, W434 x H164.5 x D395 mm, 20 kg
※The remote control is out of stock, so it's cheap. Maintained! CD turntable player. The 1-bit DAC “High Speed Pulse Flow D/A Converter” developed in-house was adopted, and I have the impression that it is more detailed and smoother than the PD-T07 one generation ago. There is a feeling of use on the exterior, such as dullness and old scratches. Serial LK1004122 AS (Hiroki Aso)
Maintenance information: 2024.6.4 Maintained (after cleaning the focus lens, check the mechanical electrical system adjustment of the fixed servo mechanism part with a dedicated adhesive RF playback level of 1.5 Vp-p)
Accessories: none
Main Specifications: Turntable CD Player Dimensions W440 x H140 x D365 mm Weight 12 kg
A compact speaker that makes it easy to enjoy JBL sound. Equipped with a compression driver, it has a nice, energetic sound. Visually, the blue baffle and walnut finish create a JBL-like atmosphere. In addition to discoloration on the exterior and corn paper, you can also see a feeling of use such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: saran net, instruction manual
Main specifications: impedance 6 ohms sound pressure level 89 dB W273 x H460 x D284 mm 11.5 kg
Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: saran net, instruction manual
Main specifications: 1 way 1 speaker impedance 6Ω maximum input 150W output sound pressure level 86db W232 × H154 × D172 mm 2 kg
Maintained! Inheriting the technology of the C-2302Vintage, it is a control amplifier with excellent cost performance. It uses a Teflon board, a phono input compatible with 3 positions, and WBT for input/output terminals, etc., making it a structure unique to SANSUI with no gaps in specification materials or circuit configurations. It has a sharp, clear, and powerful sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (INPUT switch, CARTRIDGE switch, MODE switch, other selector switches x 4 disassembly contact polishing. Master volume cleaning. Reinforced power board solder. (General adjustment)
Accessories: copy of the manual
Main specifications: Phonoico built-in control amplifier, MC/MM compatible, 7 input systems, 3 output systems, W460 x H137 x D383 mm, 16.5 kg
The highest-grade varicon tuner at the time, which is still highly popular! It uses a high-precision 7-frequency linear varicon, and you are amazed at how vivid it is as if you were listening to the studio sound as it is. Please experience sound quality that cannot be enjoyed with a digital synthesizer tuner, which combines both good sensitivity and sound quality. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance completed (varicon drive gear correction, varicon shaft rust removal, backlash treatment. RF section adjustment, tracking adjustment, MPX characteristic best adjustment)
Accessories: instruction manual
Main specifications: FM dedicated tuner, 7-speed varicon, W480 x H147 x D423 mm, 12.4 kg
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Currently sold. An affordable theater speaker with a round finish. A tall boy with 4 ways that are more luxurious than the price. It is a cost-effective speaker that can be easily used for TVs and subs. In addition to the exterior and damage to the dowels on the saran net, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net, instruction manual
Main specifications: 3-way 4-speaker bass reflex type maximum input 120W rated input 60W playback frequency band 36Hz to 25kHz 8Ω output sound pressure level 85dB W225 x H900 x D313 mm 15.6 kg
※ There is no problem with operation, but since it is cheap, it is currently sold. Panasonic CD player. A CD player that uses a MASH 1-bit DAC and a unique swing arm mechanism. It's a natural sound with no quirks, so you can enjoy it in a wide range of genres. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: frequency characteristics 2 Hz to 20 kHz W430 × H130 × D333 mm 5.2 kg
*Currently sold. Bose's classic full range speaker. This model has a reputation for its well-organized and punchy sound quality. It can be used for a wide range of purposes, from subsystems to surround use. The exterior has a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: full range unit, 6Ω output, sound pressure level 88dB, magnetic-proof type, W270 x H168 x D180 mm, 4k g/unit, MS-2 size, W230 x H47 x D200 mm, 0.65 kg
Denon speaker stand The height can be changed, so it's convenient. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W355 x H535 to 950 (adjustable height) x D309 mm 3.8 kg
Maintained! Standard model of 120V commercial power amplifier. It's high watt and can be played with plenty of room even with large speakers. Even though it's for commercial use, there is little coloring and the feeling that the sound flies straight through is very appealing. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance completed (replacement of C and IC etc. within the board, VOL cleaning*Please narrow down the VOL when the power is off)
Accessories: none
Main specifications: 155W+155W (8Ω) SNR 110dB W457 x D254 x H209 mm 18.1 kg
Maintenance has been completed, but since corn paper repair marks remain, it is inexpensive. A cutting-edge unit installed in the high-end model K2 S9800. The unit alone is also highly evaluated, and it stretches flat to a very high range, and it is a dynamic sound. As for the exterior, there are repair marks and wrinkles on the corn paper. Serial 01522, 010034 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 maintained (center cap replaced, part of the cone paper torn back side repair)
Accessories: No accessories
Main specifications: 15inch pure pulp cone woofer with Alnico 5DG magnet 8Ω 400W playback frequency band 20Hz to 2kHz minimum resonance frequency 26 Hz 94 dB recommended crossover frequency 800 Hz outer diameter 387 mm x depth 235 mm 18 kg
Maintained! Sigma cable included! The highest-grade varicon tuner at the time, which is still highly popular! It uses a high-precision 7-frequency linear varicon, and you are amazed at how vivid it is as if you were listening to the studio sound as it is. Please experience sound quality that cannot be enjoyed with a digital synthesizer tuner, which combines both good sensitivity and sound quality. There are scratches and scratches on the exterior. Serial 47K10029 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (comprehensive inspection, adjustment, and correction of modified parts of the board. Replace deteriorated LEDs and add current limiting resistors and diodes. Fixing and repairing damaged parts of the board. (Overall adjustment of the RF system and MPX system)
Accessories: sigma cable, simple FM antenna
Main specifications: FM dedicated tuner, 7-speed varicon, W480 x H147 x D423 mm, 12.4 kg
Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg
Genuine Diatone DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. The exterior has rust, paint peeling, etc. Serial 32769 32799 (Tomonori Asaine)
Maintenance information: 2024.6.3 maintained (diaphragm repair and installation adjustment pad dampener replacement, 18 mounting screws, replacement, distribution terminal, contact part cleaning, terminal cleaning, 8 insulating bushings, replacement, diaphragm cleaning)
Accessories: none
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
Accupase's best model as an integrated player compatible with SACD. It is a best-selling SACD player that inherits the know-how of advanced models. It is delicate, has a sense of scale, and has a large sound field. While it has the amount of information unique to high-end players, the fine particle feel that feels fine against the skin is truly remarkable. There is a scratch on the top plate. Serial D9Y630 (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: SACD compatible CD player, ultra giter free plus PLL circuit, MDS++ conversion system, D/A converter, HS-Link equipment, frequency characteristics 0.5 to 50 kHz, S/N ratio, 114 dB, W477 x H156 x D394 mm, 27 kg
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual, power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
Comes with original box It is an MC cartridge that uses diamond star rice chips and boron cantilevers, which are also used in higher-level models, and is characterized by outstanding high-pitched fineness and clear sound quality even in the same price range. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: moving coil type, 4 ohm, needle pressure, 1.7 to 2.0 g, output voltage 0.3 mV or more, playback frequency 10 Hz to 30 kHz, solid boron, cantilever, machined aluminum, body, diamond stylus tip, 10.5 g
This is PLATANUS MC type phono cartridge. The connection from deep bass to high frequencies is good, and the playback ability is delicate and has a sense of density. You can honestly feel the vivid, dynamic sounds, and even the performer's emotions, and the records you've listened to over and over again until now will play richer and more beautiful music. Magnetic circuits are precision machined and integrated from large chunks of pure iron to enhance rigidity so that vibration energy from the needle tip to the power generation coil is not damaged. The printing has disappeared, and there are small scratches on the body, but the needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual
Main specifications: Playback frequency 10 to 50,000 Hz impedance 2.5 ohms dead weight 16 g
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
Denon high-end MC cartridges in the heyday of analog, using amorphous boron pipes. A sound with a wide range and good separation, which has a different trend from the standard 103 series. This is the reference cartridge at the time. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: none
Main specifications: MC type output 0.2 mV 40 ohm boron cantilever solid diamond special oval needle playback band 20 to 75 kHz proper needle pressure 1.0 to 1.4 g dead weight 5.8 g
※There is no problem with operation, but since it has an air freshener smell, it is inexpensive and is currently sold. A speaker developed in collaboration with European sound designers. It is compact, has good sound, and the soft, gentle treble characteristic of soft dome tweeters is attractive. A model with a wooden cabinet with a calm design that is excellent for space harmony. There are no major scratches that are particularly noticeable on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: jumper cable
Main specifications: 2 way 2 speakers bass reflex type anti-magnetic design (JEITA) 13 cm cone type carbon fiber woofer 2.5 cm/ soft dome type tweeter impedance 6 Ω output sound pressure level 86 dB dimensions W182xH296xD293 mm weight 8.7 kg/1
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
This speaker system was developed with the aim of being a monitor for enjoying music rather than checking sound like a studio monitor. A silk OMF diaphragm is used to reproduce an excellent sense of localization and depth of sound image. The size that is easy to handle and the depth of pocket compatible with various genres are also attractive. There are small scratches and dullness throughout the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: none
Main specifications: 3 way, 3 speakers, bass reflex system, impedance 4 ohms, sensitivity level: 86 dB/w/m, frequency range: 35 Hz to 50 kHz, crossover frequency: 350 Hz, 2.5 kHz; external dimensions: W270 x H456 x D369 mm; weight: 15.8 kg
※The top surface is severely damaged, so it is inexpensive. This is a custom-made model that fits the size of Acoustic Revive's popular RSS series 4-legged speaker stand to LAT-2. Of course you can use it with other speakers if the size fits (Ryo Mizusaki)
Accessories: spike holder
Main specifications: W300 x H610 x D400 mm top plate W280 x D360 mm 28.5 kg/1 bottle (actual measurement)
A slow starter that slowly starts the connected device and protects it from inrush current when the power is turned on. PSE standard product The front panel indicator gradually brightens in sync with the gentle power start, and you can visually confirm the soft start. Serial 0919HA7026120709 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 continuity confirmed
Accessories: No accessories
Main specifications: Output/input capacity 1500 VA, output frequency 50/60 Hz, standby power 0.01W or less, W130 x H94 x D267 mm (without protrusions) 1.8 kg
MM/MC phono equalizer from the handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J17346 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual, power cord, connection cord, power supply unit
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Maintained! A hit model in the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a chip on the corner of the side panel. Serial 203719 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 maintained (replaced with a custom-made product due to VR loud sound, speaker relay replaced, MUTIG push SW replaced, other INPUT selector SW, cartridge LOAD SW, TAPE selector SW, SW disassembly contact polishing grease applied, other DC bias DC balance adjustments, confirmation of sound output for each input/output terminal connection)
Accessories: No accessories
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
NEW GENERATION LUXMAN A CLASS POWER AMPLIFIER! In addition to the warm sound quality unique to Class A, the range is wide and driving power is sufficient. It has resolution and instantaneous power compatible with the latest speakers, and can easily drive even large speakers. It goes well with recent European speakers. The exterior has line scratches on the upper center of the front and top plate, and several scratches on the upper front corner and upper back corner (Kanai Hidetsugu)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W (8Ω) BLT240W (8Ω) W440 × H230 × D480 mm weight 47.0 kg
Comes with a wood cabinet. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays particularly well with vintage speakers. As for the exterior, small scratches are scattered on the cabinet (Kanai Hidetsugu)
Maintenance information: 2024.3.16 maintained (each SW/VOL cleaning, pin jack cleaning, lamp deterioration replacement, bridge diode deterioration replacement, auto onboard capacitor deterioration replacement, direct connector soldering, pattern re-soldering, operation check (not completely removed)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Trio 2-way speakers. A sectional horn is used for the high range, and a free edge is used for the low range woofer. It's an inexpensive yet tasteful sound. The particle board of the hakama deteriorates and falls apart in tatters (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net
Main specifications: 2 way 93dB W392 x H753 x D395 mm 20kg
※The remote control is out of stock, so it's cheap. Marantz CD player with excellent value for money. The smooth sound quality spans from mid to high frequencies, so you won't get tired of listening even when you listen for a long time. This is a bargain machine with a sense of SN that is more than the price. There is dullness and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual
Main specifications: CD player, CD-R/RW/MP3 file playback compatible, HDAM circuit adopted, size W440 x H89 x D317 mm, weight 5.7 kg
Replacement needle for M97xe. If you are an M97xe user of the main unit, how about using it as a spare? There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box, instruction manual
Main specifications: needle tip shape 0.2 x 0.7 mil oval needle optimal needle pressure 1.25 g
High output type. You can easily enjoy the delicate sound of MC cartridges without a step-up transformer. The thick mid-range, and the instantaneous, and light sound is attractive. Serial 4875 (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box
Main specifications: high output MC type, output voltage 1.6 mV, needle pressure 1.5 to 2.1 g, playback frequency band 20 to 45,000 Hz, load resistance 47 kΩ or more, internal impedance 160 Ω, needle tip 0.1 x 0.2 mm square solid, special elliptical needle, dead weight 4.8 g
Replacement needle for M97xe. If you are an M97xe user of the main unit, how about using it as a spare? On the exterior, there is rust on the metal part of the magnet (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: needle tip shape 0.2 x 0.7 mil oval needle optimal needle pressure 1.25 g
The 1.5m conductor of the power cable is coated with high-purity silver on Higher-OFC, and the plug is rhodium plated. The center of gravity changes to a thicker sound quality with a lower center of gravity (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
The Silver series is used in woofers that use the new DCF technology. The unit, which has the familiar high-speed texture, is stored in a relatively large enclosure. The low range, which has more volume than the size, and the clear mid to high range are attractive. The exterior has a feeling of use such as dullness. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: jumper cable (general purpose)
Main specifications: 2-way bus reflex type frequency characteristics 40 Hz to 35,000 Hz, crossover frequency 2,800 Hz, efficiency 88 dB, impedance 8 ohms, W230 x H375 x D329 mm, weight 9.3 kg/unit
4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. There is overall dullness (Oikawa Tetsuji)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cable, instruction manual
Main specifications: High-rigidity 6-block, separate chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
Hi-Fi is in stock for the first time! It was brand new, unopened, but I opened it for testing. These wireless headphones were produced for a limited time to commemorate the 60th anniversary of the movie 007. Homages to James Bond are included everywhere, and it is a must-see model for fans that combines the symbols of B&W and 007 (Mizusaki Ryo)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box, instruction manual
Main specifications: 40mm dynamic full range/driver x 2, battery life 30 hours, charging method, USB-C terminal, W189 x H233 x D63 mm, weight: 320 g
Comes with original box First arrival at Hi-Fi Hall. Headphones with a focus on sound and design. You can enjoy it regardless of genre with clear lines of sound. It is characterized by being comfortable to wear without the impression that it is being compressed. It is in good condition (Sasaki Shota)
Maintenance information: 2024.6.2 operation confirmed
Accessories: manual, original box, connection cable
Main specifications: diamic sealed 40mm driver frequency characteristics 20 to 22 kHz impedance 30 ohms cord length 1.2 m 230 g
Beautiful item with original box! An introductory model of an MC cartridge equipped with an oval needle bonded to an aluminum cantilever. It features delicate, clear, and highly transparent expressions. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: Playback frequency range 20 to 30,000 Hz output voltage 0.32 mV needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 12 ohms recommended load resistance 100 ohms or more (when connected to a head amplifier) stylus joint oval needle aluminum pipe cantilever mass 7.6 g
※The display is uneven, so it is inexpensive. A high-resolution USB-DAC, and a DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512). Serial A210J41725016630 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio format AAC · AIF · AIFF · APE · FLAC · M4A (Apple Lossless) ALAC · OGG · WAV · WMA · DSF · DFF maximum sampling frequency PCM192 kHz/24 bit · DSD2.8224 MHz (DSD64) W254 × H76 × D360mm weight 4.7 kg
Beautiful item with original box! The MK2 CLUB from the Concorde series with an integrated headshell, is a staple of DJ play, and is now in stock for the first time at Hi-Fi. It is clear and stands out for its wide range. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main Specifications: Output voltage: 8mV Channel separation: 25dB (@1kHz) Frequency band (at -3dB): 20-20,000 Hz Stylus: Special Elliptical Appropriate Needle Pressure: 3g Dead Weight: 18.5g
*The stylus is a JICO VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The price has been drastically reduced. 2024/6/2 sales price 278,000 yen Maintained! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (power amplifier direct, etc.) switch disassembly polishing grease application (loudness, subsonic, muting, processor, reckout, MM/MC switch, input selector, source direct, tape), output relay replacement, power amplifier section, power supply transistor, adjustment volume replacement, solder repair, volume, switch cleaning, DC, bias adjustment , running test)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg