RCA line cable 2.0m pair model using plasma (metal compound powder) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
*Model using 1.0 m pair plasma (powder of metallic compounds) shielded with the No. 2 HOT XLR cable. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 303872 (Yonejima Satoshi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Western Sound Ink boost transformer with Langevin's 408B input transformer casing. It has excellent reproducibility and is suitable for both jazz and classical music (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: 198 x 103 x 60 mm 1.1 kg
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 305572 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10002357, 10002357 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Digital cable 1.0 m (RCA-BNC terminal) revision B type. A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. On the exterior, oxidation and darkening of the terminals can be seen. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
1.0 m digital cable, BNC terminal revision B type on both ends A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Cotter's most popular MARK2 TYPE L MC boost transformer for low impedance such as orthophones. Using a strong, sealed case and silver wire, the strong and fresh tone is attractive. Perfect compatibility with SPU etc. The transformer itself is different from P/PP/S. RF Enterprise regular import model. ※Silver wire breaks easily, so please handle it carefully (Murakoshi Yoichi)
Main specifications: primary impedance 1 to 6 ohm silver wire triaxial output cable, adopted size W76 x H55 x D150 mm, approx. 1.3 kg
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. The condition is generally good. Serial M20700210A (Yamato Yuki)
Maintenance information: 2024.6.13 operation confirmed
Accessories: instruction manual power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
※6 month warranty. This is the DCD-100 thin CD player that is the best match for the DRA-100 network receiver in the DENON design series. Full digital processing is possible by combining it with the DRA-100. Of course, it's attractive enough as a standalone CD player, and it's a high cost performance machine that allows you to listen to smooth sound without habit (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: slot-in CD mechanism 384 kHz/32 bit compatible D/A converter compatible with MP3 and WMA data disc playback size: W280 ✕ H71 ✕ D305 mm 4.2 kg
This is the entry model for NORDOST with a 1.5m pair of RCA cables. The inexpensive yet clear and sharp sound inherits the taste of advanced models. It has creases and a bit of a habit (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: none
Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. Serial 830693 (Murakoshi Yoichi)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: original box, needle cover, brush
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
*This model uses 1.0 m pair plasma (powder of metallic compounds) shielded by the No. 3 HOT XLR cable. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10005476 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
digital line transformer It has a 1:1.3 times boosting effect, and gives an analog-like thickness, good texture, and a sense of depth. It is recommended for those who want to make the CD sound more analog-like. Please use it by sandwiching it between the amplifier and CD player.
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: W124 x H80 x D170 mm 1.3 kg
DENON analog player. The model is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. It's also a great model for getting started. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: connection cord
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Maple type. Stand for small speakers made of solid Yonematsu. Compatible with most small speakers. The combination of Corian base and wood block material makes it resonate aggressively and accentuates the sense of spaciousness and depth. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 6 spacers
Main specifications: W280 x H615 x D370 mm 6.6 kg
Maintained in December 2019! An amplifier with excellent cost performance. It sounds great with a well-contoured sound at an affordable price. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior has scuffs on the sides. Serial 7117300736 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
2019.12.8 Maintained (main board soldered, adjustment relay replaced)
Accessories: Remote control instruction manual copy power cable
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz dimensions W434 x H134 x D407 mm weight 14.6 kg
The price has been reduced! 2024/6/10 sales price 45,000 yen with original box! A Fostex subwoofer that was born as a superior model of the CW200A. It makes me feel that the potential is high not only for surround sound, but also for audio. The bass has a core and clear contours, and it firmly supports the foundation. The exterior has small scratches and dullness, and there is a feeling of use such as sunburn on the speaker terminals. Serial 1000852 (Tomoho Asaine)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: instruction manual, saran net power cable, original box
Main specifications: subwoofer with built-in amplifier, 300W, sealed acoustic suspension, simple anti-magnetic type, 4Ω, 90dB, W340 x H360 x D400 mm, 18 kg
Speaker cable, 2.9 m pair, company Y lag/banana plug specification, 8-core structure, LGC copper conductor, 4 types of different diameter wires, has a sense of energy close to advanced models, and has excellent cost performance. Colored tape is wrapped around some sheaths (Kojima Yosuke)
Accessories: none
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see the exterior, mold, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
Comes with an indicator If you're an audiophile, this is a British “static electricity removal pistol” that you definitely want to have. With a mechanism that neutralizes static electricity with positive and negative ions, incidental sounds disappear, and the sound quality of analog records and CDs is improved to a clean sound with good visibility. Can be used approximately 50,000 times without using batteries (Asaine Tomo)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box, indicator
Key Specifications: Static Electricity Removal Accessory for LP/EP
The price has been reduced! 2024/6/8 sales price 19,800 yen ※Currently sold. Denon's 755 series has excellent cost performance. Even in this price range, the sound quality is as bright and thick as Denon. Furthermore, it is equipped with a USB terminal, so it is possible to play back iPods and USB memory devices. You can see a feeling of use on the exterior, such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.6.8 operation confirmed
Accessories: remote control
Main specifications: frequency characteristics 2 Hz to 20 kHz W434 × H107 × D279 mm 4.2 kg
This is a micro boost transformer whose details are unknown. I think it's probably a test machine. I watched it on the DL-103, and the extrusion is subdued and has a natural, gentle tone. It has no habit and is easy to use. There are some minor scratches on the exterior. Felt is attached to the bottom. (FUJISAWA KOSHI)
Maintenance information: 2024.6.7 operation confirmed (boost tested with DL-103)
Accessories: none
Main specifications: W130 x H60 x D100 mm 2.1 kg (actual measurement)
The price has been drastically reduced! 2024/6/7 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
※It is inexpensive because there are many scratches and there are no second-tier metal fittings at all. The horizontal rack can be used for a wide range of purposes, such as for AV on televisions, etc., and for audio. Compatible with a total load capacity of up to 300 kg. There is a feeling of use such as scratches. ※Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: load capacity: top plate 150 kg or less, shelf board 50 kg or less, bottom plate 50 kg or less W1,165 x H492 x D580 mm weight 62 kg
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. There are dirt and stain marks on the exterior (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
MC boost transformer loaded with transformers developed in collaboration with Tamura, for high impedance. Adopts a completely independent structure for the left and right, including the earth system. It matches Denon's DL-103, etc. The exterior has minor paint peeling and bumps. Serial 298 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 10 times W174 x H125 x D121 mm 2.5 kg
Full maintenance was carried out to replace all deteriorated parts such as capacitors and vacuum tubes! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. The exterior has a beautiful finish due to exterior maintenance, but rust etc. on the back remain. Serial 101 20007 (Tomoho Asaine)
Maintenance information: 2024.6.6 maintained (parts replacement, input/output waveform check, load test (1kHz sine wave, 8Ω load: 30W+30W, OK), sound output test) 2020.4.2 maintained (vacuum tube (50CA10), electrolytic capacitor, block electrolytic capacitor, coupling capacitor, vacuum tube socket, headphone jack, micro switch, rectifier diode, semi-fixed resistor, fuse replacement. Complete disassembly of SW/VOL contacts, polish, and apply grease to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 30W+30W), distortion adjustment (maximum output: 0.2%), sound output test)
Accessories: manual copy power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Maintained! Inheriting the technology of the C-2302Vintage, it is a control amplifier with excellent cost performance. It uses a Teflon board, a phono input compatible with 3 positions, and WBT for input/output terminals, etc., making it a structure unique to SANSUI with no gaps in specification materials or circuit configurations. It has a sharp, clear, and powerful sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (INPUT switch, CARTRIDGE switch, MODE switch, other selector switches x 4 disassembly contact polishing. Master volume cleaning. Reinforced power board solder. (General adjustment)
Accessories: copy of the manual
Main specifications: Phonoico built-in control amplifier, MC/MM compatible, 7 input systems, 3 output systems, W460 x H137 x D383 mm, 16.5 kg
Currently sold. An affordable theater speaker with a round finish. A tall boy with 4 ways that are more luxurious than the price. It is a cost-effective speaker that can be easily used for TVs and subs. In addition to the exterior and damage to the dowels on the saran net, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net, instruction manual
Main specifications: 3-way 4-speaker bass reflex type maximum input 120W rated input 60W playback frequency band 36Hz to 25kHz 8Ω output sound pressure level 85dB W225 x H900 x D313 mm 15.6 kg
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual, power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. Serial 2172380ZGD00103 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cord
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Maintained! ONKYO premain amplifier with high cost performance. A non-feedback power amplifier is used, and the power supply transformer is of high quality and carefully crafted. The power amplifier direct position allows direct input to the power amplifier via volume only. The exterior is dull. Serial 4604014114 (Yonejima Satoshi)
Maintenance information: 2024.2.15 Maintained (input selector, direct switch, etc. Switch disassemble contacts, polish contacts and apply contact cleaner. Main amplifier circuit input circuit soldering correction)
Accessories: instruction manual
Main specifications: 100W+100W (8Ω) PHONO input 1 system (MM/ MC switching) W445 x H165 x D434 mm 18.0 kg
DENON analog player. It is a model that is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Asaine Tomoho)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual cartridge, EP adapter, subweight
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
It hasn't been in stock in a long time! Accuphase Premium Cartridges Using a sapphire tube cantilever, the sound is straightforward with no specific sound, almost no distortion, and a perfect sense of range. Now it's a manufacturer that pushes ahead with the cutting edge of digital audio, but it's a cartridge where you can once again feel the high level of analog audio technology (Yamato Yuki)
Maintenance information: 2024.5.31 operation confirmed
Accessories: The original box needle cover is missing
Main specifications: MC type output voltage 0.18 mV needle pressure 1.5 to 2.5 g optimal 2 g impedance 4 ohms line contact needle
The price has been drastically reduced. 2024/5/30 sales price 128,000 yen Maintained! This is a Dynaco tubular control amplifier. It is an amplifier where you can enjoy the warm and comfortable sound unique to vintage. While the microwave feel is moderate, the nostalgic sound with an emphasis on atmosphere has a unique, hard-to-get flavor. There is a feeling of use such as rust stains on the top and sides, and rust etc. on the knobs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (12AX7, 2000 μF electrolytic capacitor, 1 μF replacement, 1/4 W resistance added as a measure to improve switching noise, vacuum tube socket and RCA jack caulking repair, parts check including block capacitors, and operation check with AC 100 to 117 V)
Accessories: none
Main specifications: vacuum tube 12 AX7 x 4, 12 x 4 line input 5 systems phono 1 system (mm), 1 pre-out system, W385 x H134 x D230 mm 7 kg
The price has been reduced! 2024/5/30 sales price 28,000 yen*Currently sold. A small speaker with a 16.5 cm woofer. It is a high cost performance speaker that allows you to listen to rich musical sounds that are beyond its size. The full expressive power of the mid-range is attractive. The exterior is good with no conspicuous scratches. Serial 37866 (Yonejima Satoshi)
Maintenance information: 2024.5.30 good sweep test
Accessories: saran net
Main specifications: 2 way impedance 8 ohms efficiency 90 dB playback frequency band 43 to 21,000 Hz W227 x H360 x D230 mm 7 kg
※Since it is cheap, it will be handed over as is. DSD compatible network audio player. Equipped with WIFI, the D/A converter is compatible with DSD 5.6 MHz and 192 kHz/32 bit, the same as those used in super audio CD players. It is a model with high cost performance. Recommended for those getting started with network audio. There is a line wound. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: DSD (2.8 MHz/5.6 MHz) AIFF (192 kHz/24 bit) AIFF, WAV, FLAC (192 kHz/24 bit) Apple Lossless (96 kHz/24 bit) wireless LAN standard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n compliant W434 x H73 x D297 mm 2.9 kg
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
*The remote control is out of stock, so it is cheap and is currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. The sound quality is stable in both digital and analog. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) line input 4 phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg
*Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
*Currently sold. The output has been changed to an RCA female terminal. FR MC boost transformer using a toroidal core. Create a natural sound that makes it easy to understand the characteristics of cartridges. In addition to switching the impedance of 10 to 30 ohms, there is also a bypass position, so it is compatible with various cartridges without taking up much space. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, connection cable
Main specifications: impedance 10 ohm/30 ohm/PASS playback frequency band 20 Hz to 30 kHz W64 x H64 x D105 mm approx. 455 g