Maintained by Denon Service! This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine (Sasaki Shota)
Maintenance information: 2024.4.26 manufacturer maintained (13 deteriorated TRs replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg
Maintained by TEAC! VRDS-25 rigid menism final model. This is a popular model used by JAZZ/ROCK fans with a strong housing and a highly accurate VRDS mechanism, and has high resolution and clear contours. Spikes are attached to the solid 8 mm thick bottom plate, and the excellent construction with an excellent sense of reliability is also attractive. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.26 Maintained (All parts have been inspected. We have confirmed wear on the tray belt, clamp belt, and turntable bearings. Tray belt, clamp belt, and turntable bearing replacement. (Check operation by cleaning and lubricating the pickup and mechanical parts)
Accessories: Remote control instruction manual copy
Main specifications: multi-bit DAC, 25 bits, 8 times oversampling digital filter, W442 x H145 x D344 mm, weight 23 kg
Maintained! A hit model during the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 212487 (Hiroki Aso)
Maintenance information: 2024.4.26 maintained (MUT switch, push slide, SW exchange, volume VR, sound replacement, speaker relay due to deterioration, 14 parts replacement, other input selector, cartridge selector, each SW disassembly contact, polishing grease application, etc., DC bias balance adjustment, each input/output sound output check)
Accessories: copy of instruction manual
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. The exterior is dull and has a feeling of use. Serial 72380SDG012 (Hiroki Aso)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cable
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
※ Tweeter soft dome has dents on the rim, so it is inexpensive. Compact Excite series speakers. There is a sense of power in the sound unique to unit development manufacturers, and the sense of scale in the low range in particular is so majestic that the compact size is unbelievably large. As the sound progresses, the transparency of the sound increases, so the fact that you can keep listening is also attractive. There is a slight feeling of use such as small scratches. Serial 03573940/03573941 (Takasaki Atsushi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: saran net
Main specifications: 2-way bass reflex type 180mm woofer 27mm tweeter 4Ω 87dB frequency band 40Hz to 23kHz W205 x H350 x D290 mm 9.0 kg
Maintenance is being carried out in 2022. A reprint of Marantz's famous model 7. In addition to the good graininess of the sound and the glossy and rich sound quality, it brilliantly inherits the good quality of the mid-range. You can enjoy a feeling that transcends ages and genres. The exterior has dullness and scratches. Serial F020306 (Murakoshi Yoichi)
Maintenance information: 2022.3.22 maintenance (implementation of measures to prevent the rear input terminal and chassis earth from floating, hot side loosening, contact pressure correction. Clean each vacuum tube pin and socket contact. (Volume VR part ground wire deviation correction, wood case stop screw installation)
Accessories: instruction manual (copy)
Main specifications: used vacuum tube 12AX7×6 W455×H178×D261mm 8kg
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: case, needle cover, instruction manual
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
Classic speaker selector. It is a convenient car that outputs from 1 input system to 4 systems, or conversely, outputs from 4 input systems to 1 system (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
It is an ambitious K2 series mid-range model that inherits the characteristics of the S9500. The dynamic sound quality that makes use of the horn stands out for the strength of the sound image. The sound is lively and full of life, and the realism of the bass is outstanding. The exterior has line marks and dullness. Serial J1240-010742, J1240-010709 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: saran net, jumper plate
Main specifications: 2 way 3 speakers · bass reflex system · tall boy type 30 cm cone type (LE125S) x 2 high range horn type (275Nd) frequency characteristics 35 Hz to 20,000 Hz output sound pressure level 95 dB impedance 4 Ω maximum allowable input 150 W crossover frequency 800 Hz W499 x H1,254 x D412 mm 89kg/1
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2596 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2016 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
※Because it smells like tobacco, it's cheap. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
※Because it smells like tobacco, it's cheap. Maintained! Custom edition of the large power amplifier PA-70 from the STASIS circuit. Supported by a huge 700W toroidal transformer, the speaker driving power, which consists of a 90A power supply, is one of the best among domestic amplifiers. Fortissimo, which excels at delicate depictions but doesn't make you feel limited, is unique to this large amplifier. The exterior is dull and scratched. Serial 11179 (Fujisawa Yukishi) A
Maintenance information: Maintained on 2024.4.26 (bias part and constant current part semi-fixed VR, output relay, and damaged screws were replaced, additional installation due to lack of cable protector, solder crack correction, bias and offset adjustments, output sound check, dirt removal and cleaning)
Accessories: No accessories
Main specifications: rated output 225W+225W (8Ω) W435 x H200 x D421 mm approx. 28.5 kg
Maintained! Although it is a line-only preamp, it also has a total of 8 input systems, so it is convenient for using multiple devices such as CD players. Also, the CD input has a dedicated buffer amplifier and volume, so you can feel the attention to detail in this model. The exterior has bumps, scratches, etc. Serial J7Y818 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 Maintained (replaced due to offset volume disconnection and poor contact. Due to poor contact with the push switch inside the sealing door, polishing grease was applied to the disassembly contact. The main volume and CD volume contacts have been cleaned. The power circuit capacitor has been replaced. Each input/output operation was checked.)
Accessories: No accessories
Main specifications: line preamplifier, CD dedicated buffer amplifier, CD dedicated input balanced/unbalanced 1 system each, line input 5 systems, 1 output balance system, 2 unbalanced systems, W475 x H135 x D373 mm, 11 kg
※The tweeter is cheap because it has dents. A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals (Murakoshi Yoichi)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: spikes, saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, anti-magnetic design, frequency characteristics, 35 Hz to 20 kHz, impedance, 4 ohms, output, sound pressure level, 90 dB, W237 x H1080 x D310 mm, 25 kg/book
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches, dullness, etc. Serial 30300 (Tomoho Asaine)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
Operation check)
Accessories: remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
A convenient speaker selector that allows you to connect 3 sets of speakers to 1 amplifier. Also, it is possible to switch between 3 amplifiers for 1 set of speakers. A simultaneous bipolar switching system has been adopted, and low contact resistance has been achieved by silver plating on the switch contacts and gold plating on the terminals. There is dullness and strong discoloration in the terminal (Murakoshi Yoichi)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: W250 x H60 x D150 mm 1.2 kg
The interior has been completely overhauled! This is an 811A push-pull tube power amplifier. You can enjoy an overhanging vacuum tube sound with luxurious mono specifications where the woofer is properly braked. The thick, cored sound in the low range makes you feel the momentum and strength unrivaled for a vacuum tube. The entire exterior has scratches and dullness over time (Sasaki Shota)
Maintenance information: 2024.4.26 Maintained (vacuum tube 5R4GY strain and deterioration replacement. 1W resistor distortion and deterioration replacement. 25W resistance deterioration and pair replacement. Vacuum tube 6W6 deterioration replacement/vacuum tube 6SN7 defective replacement. Block capacitors 40 μF x 2 made in Japan → replaced with CE ones. 1 x 2 Vacuum Tube Socket and RCA Jack Caulking Repair Rated output: 85 to 120 W with AC 100 to 117 V, measured at SP: 8 ohms)
Accessories: none
Main specifications: vacuum tube 811A x 4, 5R4GY x 8, 6W6GTB x 4, 6SN7GTB x 2, 12AX7 x 2, 165W+165W W482 x H272 x D310 mm
This overhang gauge is convenient for positioning cartridges. The A side can be used for the record needle side slip test, and the B side can calibrate the cartridge part (Murakoshi Yoichi)
Accessories: none
Main specifications: acrylic diameter 295mm, thickness 2mm 154g
Refreshment maintenance has been completed with attention to detail, such as cleaning the inside of the driver gap! The depth of the rich low frequencies of the Alnico LE14A is tight with Lanzaroi edges, and the high frequencies with a dry atrium unique to the 175DLH make you hear vintage sounds unique to the Lancer. The combination of a marble top plate and a beehive horn creates a tasteful sound that resonates a lot. Serial 13952 13958 (Murakoshi Yoichi)
Maintenance information: 2024.4.25 maintenance (exterior repair (polishing, oil finish, front and rear baffle/hakama repair, painting, backside fabric replacement) driver maintenance (magnetic circuit gap cleaning, center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) network maintenance (frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement)
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, floor type, 35.5 cm cone type for low range (LE14A), high range horn type (LE175DLH), network LX10 impedance 8 ohms, W440 x H620 x D310 mm, 39.0 kg/1
※It is inexpensive because there is wobble on one side. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
Digital cable, 1.0m, RCA terminal, cotton blade, riz wire conductor with a stranded coaxial sheath structure, is a nuclear-free type, but it is a cable that makes you feel strong in the mid-range similar to having a core. The plug is dull, and the sheath has fading and fraying over time ※Please connect the red plug ring side to the output terminal and the white plug ring side to the input terminal (Kojima Yosuke)
Accessories: none
Digital cable, 1.0m, RCA terminal, cotton blade, riz wire conductor with a stranded coaxial sheath structure, is a nuclear-free type, but it is a cable that makes you feel strong in the mid-range similar to having a core. The plug is dull, and the sheath has fading and fraying over time ※Please connect the red plug ring side to the output terminal and the white plug ring side to the input terminal (Kojima Yosuke)
Accessories: none
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
The stereo to mono conversion cable 1.0m SD-1010 is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
The stereo to mono conversion cable 1.0m SD-1010 is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
The stereo to mono conversion cable 1.1 m SD-1010 is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. The area around the plug is dull, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation ingenuity is necessary so as not to put a load on the plug or jack to be connected (the cable length at the end of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, Connect the terminal side where the core box is located to the input terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
The 1.5m SD-1010 stereo to mono conversion cable is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
Digital cable, 1.0m, RCA terminal, cotton blade, riz wire conductor with a stranded coaxial sheath structure, is a nuclear-free type, but it is a cable that makes you feel strong in the mid-range similar to having a core. The plug is dull, and the sheath has fading and fraying over time ※Please connect the red plug ring side to the output terminal and the white plug ring side to the input terminal (Kojima Yosuke)
Accessories: none
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. There is dull writing around the plug, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation requires ingenuity (the cable length at the tip of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, and input the terminal side with the core box Please connect to the terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
RCA cable 1.0 m pair is a characteristic line cable that makes a careful overall sound and feels strong in the middle range of pianos, etc. The area around the plug is dull, and there are abrasions, fraying, and dirt on the sheath ※Since the core part is very heavy, installation ingenuity is necessary so as not to put a load on the plug or jack to be connected (the cable length at the end of the core box is about 15 cm) *Connect the terminal side with the red seal in the middle of the sheath to the output terminal, Connect the terminal side where the core box is located to the input terminal (Kojima Yosuke)
Accessories: none
Main specifications: total weight 1 kg
The price has been reduced. 2024/4/25 sales price 698,000 yen Manufacturer maintenance including all output tube replacements in 2020! McKinn's tube power amplifier. While it has a smooth and glossy tone, the delicate tone with an extremely high sense of SNR is truly a modern vacuum tube amplifier. The modern McKinn sound, which has no conventional noise and is highly transparent yet thick and glossy, is attractive. The meter is cloudy and burnt (Oikawa Tetsuji)
Maintenance information: 2020.4.14 Electric maintenance completed (vacuum tube pre-replacement, front lamp replacement, on main PCB, various resistors, diode replacement, capacitor replacement, bias adjustment, operation inspection)
Accessories: instruction manual, power cable, original box
Main specifications: KT88 parallel push stereo 100W mono 200W with balanced input W445 x H257 x D432 mm weight 40 kg
The price has been reduced. 2024/4/25 sales price 278,000 yen Maintained! A stereo power amplifier limited to 200 units. The careful, natural, and delicate sound that can be heard for a long time, backed by artistic internal wiring, is the true essence of Wesugi amplifiers. Modern speakers also drive quietly and firmly (Yasuhito Koshihama)
Maintenance information: 2024.4.25 Maintained (*confirmed above, lots of dust and dirt* input volume replacement, solder correction, misalignment correction, vacuum tube pin cleaning mold, dirt cleaning, foreign matter removal, bottom plate mounting reversed* bias check output audio check (output approx. 40W confirmed)
Accessories: none
Main specifications: 40W+40W vacuum tube ECC83 x 1 ECC82 x 2 EL34 x 4 W365 x H232 x D310 mm 31 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
This standard cartridge is particularly famous in the company's MC series. It has good stretch in the high range and a texture that feels good against the skin, has thickness and density in the mid-range, and it is a tone that makes you feel a sense of temperature (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 ohms internal impedance 3 ohms dead weight 7 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
G-shell oval needle model from the Herman era. The glossy, rich, and heavy sound is an appeal that never fades. It is an eternal cartridge that fully conveys the appeal of analog (Yasuhito Koshihama)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Comes with original box SPU synergy with the highest output in the SPU lineup. Using a G-shell containing neodymium magnets and zinc powder, it combines a modern, energetic sound with a rich sound typical of an orthophone. The stylus is good (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: original box
Main specifications: MC type output voltage 0.5 mV diamond oval needle frequency characteristics 20 to 20,000 Hz needle pressure 3 g dead weight 30 g
This model commemorates the 250th anniversary of J.S. Bach's death. Uses a 6N silver wire coil. It is a cartridge that excels in even more delicate spatial expression while retaining the feel of an orthophone. The know-how of the masterpiece Jupiter has been fully introduced, and the high cost performance stands out. The cantilever is slightly to the right, and there is a small scratch and dullness on the body (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: nothing
Main specifications: output voltage 0.45 mV frequency characteristics 20 Hz to 35 kHz internal resistance value 5 ohms, suitable elliptical needle pressure 2.5 g, dead weight 10 g
※The nail on the needle cover is broken, so it cannot be locked. This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
※Since the cantilever is slightly raised, it is inexpensive. Mid-range models in the MC Star series, which come in 3 types. Both models have different sounds, and they are all unique, but 20W is a model that places particular emphasis on the mid-range. The sound is warm in tone, and has an extrusive, and comfortable sound that goes through the SPU. The wooden body made of Yamanaka lacquer, which is a traditional Japanese craft, is also beautiful.
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV suitable needle pressure 2.3 g recommended load impedance 10 to 200 ohms dead weight 10.5 g
FR heavyweight headshell In combination with a heavy needle and pressure needle, it exhibits excellent tracing performance, such as digging up from the back of a groove on a record board (Yasuhito Koshihama)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: aluminum press processing actual measurement 19g
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. There is a screw scratch (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
A thick, highly rigid, heavyweight shell prepared by Orthophone for cartridges other than the SPU series. The cartridge ground surface is flat, has excellent adhesion, and is an easy-to-use head shell (Oikawa Tetsuji)
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
A head shell with a round tip that matches the MC Jubilee and Kontrapunkt cartridge shapes. Its own weight is 14.6g, which is a bit heavy (Yasuhito Koshihama)
Main specifications: machined aluminum block, dead weight 14.6 g