※Since the phono module has been replaced by an external manufacturer, it is inexpensive. Although it is a replacement module, surprisingly, it is comparable to the original LD2. The most famous Mark Levinson preamp. Mid-spectrum winding volume that demonstrates outstanding sharpness. It has vivid and energetic sound quality. The ability to listen with plenty of dynamism has an appeal that cannot be obtained with current preamps. There is a scratch on the wood cabinet and peeling on the back. Serial 1677/0818 (Sasaki Shota)
Maintenance information: 2022.9.15 Maintained (replacement of all domestic capacitors and deteriorated capacitors in the power supply unit, replacement and re-encapsulation of operational amplifier IC defects in the RCH peak meter module, disassembly cleaning for main volume and input volume, external cleaning, operation inspection of attached cables, specification inspection, inspection of each operation. (PHONO contains an alternative module, but there is no operation problem)
Accessories: power cord, connection cord, 3 sets of Remo pins
Main specifications: Phono MM2 system [main body] W482 x H113 x D354 mm approx. 5.5 kg [power supply unit PLS-150] W102 x H113 x D257 mm approx. 2.5 kg
Comes with original box! Currently sold. The urethane inside has deteriorated, so it has been removed. Stax headphone and amplifier set. You can enjoy a very grainy and fresh tone. (Sasaki Shota)
Maintenance information: 2024.5.6 operation confirmed
Accessories: original box
Main specifications: Playback frequency band 30 to 35,000 Hz sensitivity 94 dB SRD-7MK2: W73 ✕ H120 ✕ D215mm weight 1.5 kg
The body is SPU-G, but the needle tip has been replaced with an SPU Classic GE mk2. An SPU that fully conveys the appeal of analog. It is a cartridge that combines the softness of the classic series sound with the strong flavor (Sasaki Shota)
Maintenance information: 2024.5.6 sound output operation confirmed
Accessories: original box (for SPU GE ClassicMK2)
Main specifications: MC type output voltage 0.2 mV impedance 2 ohms frequency characteristics 20 to 25,000 Hz internal resistance 6 ohms diamond needle nude Elliptical (elliptical needle) suitable needle pressure 4 g
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Among Sony CD players, this model is sharp and has a sense of energy. The sharp sound is fully compatible not only with jazz and rock, but also with modern typed sound sources. There are dullness and scratches on the main body, and discoloration can be seen on the stabilizer*The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: copy of instruction manual
Main specifications: 1-bit current pulse DAC, fixed optical system, zinc die-cast pickup base with 4 types of variable digital filters, frequency characteristics 2 Hz to 20,000 Hz, W430 x H125 x D375 mm, 15.2 kg
Pair tube, CV25 equivalent tube, VT-4C/211 compatible ball, large triode tube, molybdenum plate (zirconium coating), measured IP value: 45/45 mA (the best reference IP value for this amplifier is 50 mA) with white box ※ sound is checked with a test amplifier, plate current values have been measured, and it has been determined that operation is good (Kojima Yosuke)
Accessories: white box
It is a model that uses PCOCC. It has a parallel 4-core structure with 2 inner cores for treble. The 2 outer cores are for bass. It features bright, crisp sound quality suitable for ROCK and POPS (Daiki Goto)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Key Specifications: Speaker Cable PCOCC Conductor
* Since it has been replaced with an Audio-Technica balance plug, it is inexpensive. Balance cable 1.0 m pair. The copper/aluminum/brass hybrid configuration, which is also a characteristic of the company, has high resolution and is an exciting sound that comes out quickly (Daiki Goto)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
AUTOGRAPH MINI is a masterpiece in the Prestige series. Uses a coaxial unit with a diameter of 10 cm and a baht laminated plywood enclosure. You can experience the small yet well-organized British sound. The exterior is good with little feeling of use due to dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: instruction manual, original box
Main specifications: coaxial 2-way bass reflex bookshelf speaker efficiency 88dB continuous allowable input 50W maximum allowable input 200W input impedance 8Ω crossover frequency 2.3 kHz frequency characteristics 68Hz to 54kHz enclosure material birch laminated plywood enclosure surface finish/solid teak, veneer W210 x H345 x D130 mm 4 kg
Maintained! The popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units (Sasaki Shota)
Maintenance information: 2024.5.4 Maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced. Terminal area cleaning. Attenuator SW contact cleaning. Crossover 500Hz check OK)
Accessories: none
Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
Maintained! With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Serial 35512 35917 (Sasaki Shota)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced, terminal part cleaned, 2 parts replaced for attenuator VR, crossover 7,000 Hz check OK)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
The price has been reduced. 2024/5/4 sales price 128,000 yen Maintained! An introduction to AccuPhase power amplifiers. Even though it was an entry-level model, its thin and stylish design was a popular model that was popular at the time. We don't choose preamps that combine with power amplifiers that feature delicate and elegant expressions. There is dullness and small scratches, but there are no noticeable scars (Sasaki Shota)
Maintenance information: 2024.5.4 Maintained (2 output relays replaced, 3 electrolytic capacitors replaced, 2 semi-fixed VR replaced. Solder correction, connector cleaning)
Accessories: manual
Main specifications: output 120W+120W (8Ω), 2 speakers can be connected, with mono changeover switch
W445×H131×D388mm 18.1kg
Maintained! A D/A converter that was said to be close to analog sound. The high frequencies are tightened, the mid and low frequencies are mild, and the sound feels powerful with a sense of directness. The high cost performance also shines (Sasaki Shota)
Maintenance information: 2024.5.4 maintained (21 replaced due to electrolyte condenser fluid leakage, electrolyte cleaning, pattern and solder correction, insulation washer replacement due to damage, sound and HDCD recognition checks on each input/output)
Accessories: manual, power cable
Main specifications: Input terminal/1 coaxial system, 1 optical system, ST link 1 analog output system (RCA) HDCD compatible D/A conversion chip using a multi-bit Barbrown PCM63P-K type W430 x H60 x D230 mm 4 kg
Maintained by the manufacturer! An analog player with the WE-308 mounted on the DP-6000. Denon Genuine Cabinet DK-100G This is one car that is characterized by SAEC's crisp and accurate sound images, and makes a versatile sound regardless of genre. There are sunburn marks on the cabinet (Sasaki Shota)
Maintenance information: 2024.5.4 manufacturer maintained (13 transistors replaced, electrolytic capacitor, FL tube lighting capacitor, AC cord, pin plug replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: Phase locked servo type direct drive (crystal control) AC servo motor turntable is 312 mm in diameter, made of die-cast aluminum, 33, 45, compatible with fine rotation, double knife edge, static balance, universal type, total length 329 mm, effective length 240 mm, overhang 5 mm, needle pressure 0 to 2 g
It is a preamplifier that can obtain more satisfaction than directly connected to a power amplifier in terms of sound image positioning, bass volume, and resolution. The cost performance is tremendous, and it is the best amplifier for serious audio projects in the future. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.4 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: line input RCA x 5 · TAPE x 2 · PHONO x 1 (MM/MC) line output RCA x 2 · TAPE out RCA x 2 size W431 x H99 x D337 mm weight 7.7 kg
Comes with PS-3 genuine stand sold separately! This model consists of BOSE's popular 121 small speakers and 242 woofers. The thickness of the low frequencies has been increased to 121, which has a tense sound. It plays pop and rock in a light manner. There is a dent on the stand (Daiki Goto)
Maintenance information: 2024.5.4 operation confirmed
Accessories: stand
Main specifications: 3 way, 3 speakers, Astimus system, bookshelf type, low frequency side, 16 cm, cone type, medium range side, 11.5 cm, cone type, 2.5 cm, cone type impedance 6 Ω, W310 x H760 x D270 mm, 17.85 kg/1 bottle (including stand)
A rare JBL 46cm woofer has arrived! The thick sound that can only be produced with a 46cm woofer is attractive. Please try this large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior has tape marks and magic marks on corn paper. Serial 181936/481666 (Sasaki Shota)
Maintenance information: 2024.5.4 sweep test good
Accessories: none
Main specifications: 46cm cone woofer unit impedance 8Ω 99dB frequency range 25Hz to 1.6kHz recommended enclosure volume 140 to 340 lit diameter 464 ✕ depth 212 mm weight 13.2 kg
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.7 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.5 m pair, LC-OFC class 1 conductor, long-selling product balance that can transmit pure signals has been produced for over 10 years. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
RCA cable 0.75m pair, a hybrid configuration of copper, aluminum, and brass, which is also a characteristic of the company, has a high resolution and an exciting sound that comes off quickly. It rubs against the sheath and is dull on the plug (Kojima Yosuke)
Accessories: none
Speaker cable is an extra thick cable using 12 pairs of 18-gauge oxygen-free high-conductivity copper with 2.9 m pairs of untreated straight wires. There is dirt and stickiness on the sheath (Kojima Yosuke)
Accessories: none
A standard machine that also supports 192 kHz/24 bit digital input. With the theme of improving speaker driving power, the power transistors on the power amplifier driver stage have been made larger, and you can hear sounds with a higher driving power with a sense of stability. There are no particularly noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, power cable
Main specifications: 40W+40W (8Ω) PHONO (MM) optical digital input 2 systems coaxial digital input 1 system W440 × H105 × D370 mm 7.8 kg
This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed)
Accessories: power cable
Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
A very simple CD/SACD player. The sound with fast response and low center of gravity is attractive. You can fully enjoy SACD-like spatial expression and highly transparent sound at a low price. There is a small scratch on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, power cable, instruction manual
Main specifications: playable media/SACD, music CD, CD-R & CD-RW (music format, MP3, WMA) W420 x H113 x D340 mm 11.0 kg
Maintained. A diatone preamp with a thick mid-range sound. The sense of extrusion in the low frequencies is also good, and the overall sound is energetic. Also, it is a unit with a full range of functions as a preamplifier, such as input gain adjustment and left and right independent tone control. The exterior has many scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel lever switch and other switch disassembly contacts are polished and contact cleaner applied. Volume contact correction. Power cord replacement)
Accessories: none
Main specifications: 2 mono construction system, special attenuator volume adopted, equipped with 2 PHONO inputs, 2 line inputs, W425 x H169 x D204 mm, 5.8 kg
Maintained, including replacing glass panels with new ones! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the appeal of the sounds of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is good without any major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel dismantling and replacement, meter, illumination lamp replacement, in-board C deterioration replacement, RCA cleaning, SW, VOL cleaning, operation check, backup power supply transformer pattern, relay pattern solder crack correction)
Accessories: remote control, copy of instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
The company's SONICA DAC remote control unit*Please check the manufacturer's website for operating environments, etc. (https://www.oppodigital.jp/discontinued-product/sonica-dac/)(及川 Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
※Cleaning solution is not included. VPI's classic vacuum record cleaner. Attach the record to the turntable, apply cleaner liquid, clean it with a brush, and then use a vacuum method to strongly suck fine dust and dirt that has entered the disc's groove. There is a dent in the corner
Maintenance information: 2024.5.3 operation confirmed (rotation, vacuum OK)
Accessories: instruction manual, power cable
Main specifications: W394 x H235 x D362 mm 12.7 kg
※Inexpensive because there are scratches and paint peeling. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
The price has been reduced. 2024/5/3 sales price 99,800 yen Hi-Res compatible USB-DAC, DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
This line improved the design of Revisona, which is a 1.2 m pair multi-solid core alloy front line for phono cables. You can enjoy pure, dynamic sound just like a PAD. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.2 continuity confirmed
Accessories: none
Maintained! Line-specific control amplifier with balanced output. The technology cultivated with professional equipment is summarized in a simple configuration. It is a sound that connoisseurs like, with both the amount of information and thickness. There are line scratches on the top plate and dirt and tears on the instruction manual ※The balance output is 3rd hottest (Mizusaki Ryo)
Maintenance information: 2024.5.2 Maintained (cleaning is not possible because each SW and VOL are sealed types. Only detergent spray cleaning from gaps, variations in capacitor capacity within the board → replacement. RCA earth float → cleaning, operation check (the gap cannot be completely removed) *In the future, it will not be compatible if the dedicated parts are defective.)
Accessories: instruction manual
Main specifications: 6 line inputs, 1 balanced output system, 1 unbalanced system, W431 x H95 x D400 mm, 5.9 kg