Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant tonal feel is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration exchange, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration exchange, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
This standard cartridge is particularly famous in the company's MC series. It has good stretch in the high range and a texture that feels good against the skin, has thickness and density in the mid-range, and it is a tone that makes you feel a sense of temperature (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.09 mV needle pressure 1.7 g playback frequency band 20 to 20,000 Hz load resistance 10 ohms internal impedance 3 ohms dead weight 7 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Oikawa Tetsuji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Comes with original box SPU synergy with the highest output in the SPU lineup. Using a G-shell containing neodymium magnets and zinc powder, it combines a modern, energetic sound with a rich sound typical of an orthophone. The stylus is good (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: original box
Main specifications: MC type output voltage 0.5 mV diamond oval needle frequency characteristics 20 to 20,000 Hz needle pressure 3 g dead weight 30 g
This model commemorates the 250th anniversary of J.S. Bach's death. Uses a 6N silver wire coil. It is a cartridge that excels in even more delicate spatial expression while retaining the feel of an orthophone. The know-how of the masterpiece Jupiter has been fully introduced, and the high cost performance stands out. The cantilever is slightly to the right, and there is a small scratch and dullness on the body (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: nothing
Main specifications: output voltage 0.45 mV frequency characteristics 20 Hz to 35 kHz internal resistance value 5 ohms, suitable elliptical needle pressure 2.5 g, dead weight 10 g
※The nail on the needle cover is broken, so it cannot be locked. This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
※Since the cantilever is slightly raised, it is inexpensive. Mid-range models in the MC Star series, which come in 3 types. Both models have different sounds, and they are all unique, but 20W is a model that places particular emphasis on the mid-range. The sound is warm in tone, and has an extrusive, and comfortable sound that goes through the SPU. The wooden body made of Yamanaka lacquer, which is a traditional Japanese craft, is also beautiful.
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV suitable needle pressure 2.3 g recommended load impedance 10 to 200 ohms dead weight 10.5 g
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. There is a screw scratch (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
A thick, highly rigid, heavyweight shell prepared by Orthophone for cartridges other than the SPU series. The cartridge ground surface is flat, has excellent adhesion, and is an easy-to-use head shell (Oikawa Tetsuji)
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
A head shell with a round tip that matches the MC Jubilee and Kontrapunkt cartridge shapes. Its own weight is 14.6g, which is a bit heavy (Yasuhito Koshihama)
Main specifications: machined aluminum block, dead weight 14.6 g
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki)
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
Comes with an acrylic cover. A cartridge keeper that can hold 6 cartridge shells. The clearance is large and easy to handle. There are scratches and dirt on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W200 x H107 x D100 mm weight 450 g (actual measurement)
The core model for Marantz SACD players. Although it is an entry model, it has a high S/N feel typical of the company's products, and the sound quality is excellent for listening for a long time. It is an attractive player with a sense of quality in the mid to high range with a fine particle feel. The exterior has a feeling of use such as dullness and small scratches. Serial 20000540002323 (Takahashi Nobuyuki)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: SACD/CD player, 1 analog output system (RCA), 2 digital output systems (coaxial x 1, optical x 1), digital filter, switch to 3 modes, W440 x H123 x D419 mm, 13.5 kg
※There is no problem with operation, but it is inexpensive because there is a lot of rust. LUXMAN's thin synthesizer tuner. The design matches the Luxman Primaine from the 80s, and has a nostalgic, nostalgic atmosphere. The exterior has dullness, small scratches, and rust, and there is a feeling of use, as the power cable has been changed to an external product. Serial G2701694 (Hiroki Aso)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: FM/AM tuner FM tuner part S/N stereo 80dB selectivity NARROW (±300kHz) 80dB
WIDE (±400kHz) 65dB AM tuner part S/N50dB dimensions W453 x H87 x D344 mm weight 4.8 kg
※ Sub weight is missing. A long-selling player that Technics is proud of. It boasts a simple design that is easy to use, stable operation, and durability. Clear contours, high earthquake resistance, highly accurate tone arms, etc., all of these are attractive cars with a degree of perfection that exceeds the price. Exterior, slight small scratches, abrasions, etc. can be seen (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: dust cover
Main specifications: Quartz control direct drive system speed 33.45 rotation speed fine adjustment range ± 8% (continuously variable) W453 x H162 x D360 mm approx. 12.5 kg
Maintained. Battery-powered MC head amplifier. The modular type allows you to enjoy analog playback like the company's ML series. It has the sharpness and dynamic sound unique to being battery-powered, and the combination with the old SPU is particularly exquisite. There are scratches and scratches on the exterior. Serial 1232 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (there is a liquid leak mark on the battery holder. (It was cleaned and repaired because it was not available.)
Accessories: No accessories
Main specifications: 8 mV (maximum), output terminal with battery checker, 250 mV (maximum), frequency band 20 to 50,000 Hz, W220xH45xD100mm, 0.7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 118,000 yen Maintained! The thin preamp from the musical Fidelity has an English style taste where you can feel the elegance, and the perfect balance of high frequencies that don't insist too much on the thick, thick mid-low range unique to this era feels good. The tape/monitor switch has been repaired and replaced and is a non-genuine product. The exterior is dull overall, with small scratches and a lot of feeling of use (Asaine Tomoho)
Maintenance information: 2023.10.26 maintained (TAPE1 monitor switch defective → non-genuine silver knob replacement. Rear terminal screw idle rotation all replacement, operation check) 2023.10.12 maintained (main VOL noise → replacement. Treble distortion noise VOL replacement (original not available, replacement with replacement, no click on the midpoint position) IC, DC leak defect replacement, capacitor deterioration replacement, operation check.
(We will not be able to respond if the dedicated parts are defective in the future)
Accessories: none
Main specifications: external power supply system with PHNON (MM MC) CR type RIAA equalizer output 2 systems W482 x H57 x D166 cm 3.0 kg
Full maintenance from exterior to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 maintenance (exterior (repair, polishing, oil finish, front and rear baffle repair, painting, saran net replacement, frame repair) woofer maintenance (edge replacement, cone paper coating) midmaintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit rust removal, center adjustment, sound-absorbing material replacement, terminal contact cleaning) tweeter maintenance (horn disassembly and cleaning, Magnetic circuit rust removal, gap cleaning, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal cleaning) defuser repair)
Accessories: saran net diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
Y lug plug set of 4 have mirror-polished terminal contact parts made of leadless brass material with excellent conductivity, and rhodium plating treatment has been applied to the surface to further improve conductivity and durability (Tamura Eiji)
Accessories: original box, instruction manual
The price has been drastically reduced! 2024/4/22 sales price 798,000 yen Maintained! A model equipped with a variable switching phono, imported from regular RF. This is a high-end preamp that made the CELLO name known. It is no exaggeration to say that the elegant and beautiful tone, which is precise and delicate, has outstanding expressiveness and unique luster, is a work of art. In addition to the appearance being dull, there are small scratches on the top plate. Serial 0683 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (all corrected for disconnection of the Y lug part of the DC cable, replacement of all power supply parts and body deterioration capacitors, replacement for volume galli, replacement, replacement, RCA jack for rust, polishing specs inspection for each operation, the phono is set for MM with a gain of 36 dB input impedance of 50K)
Accessories: instruction manual, power supply unit, power cable
Main specifications: input imbalance (RCA) 8 systems/PHONO (MM/MC) 1 system/balance (Fisher) 1 system output unbalance (RCA) 2 system/balance (Fisher) 1 system body/W515 x H140 x D370 mm weight 10.1 kg power supply/W240 x H100 x D335 mm weight 5.1 kg
The price has been drastically reduced. 2023/12/29 sales price 99,800 yen Maintenance completed! The design full of oldies is attractive, and Newcam's mono mixer premain for PA. 6L6 is used as the output tube. Channel 1 is compatible with LINE, PHONO, and MIC, and channels 2 to 4 are compatible with microphones. The volume for each channel is around 12 o'clock, and MASTER is used for volume adjustment. There is a feeling of use such as small scratches and paint deterioration appropriate to the exterior model year (Kobayashi Hitoshi)
Maintenance information: 2023.12.12 maintenance (master volume disassembly, cleaning repair, contact repair for each part such as MIC input transformer, etc., left side front lamp off, 12AX7, 150 μF electrolytic capacitor replacement. Vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 41 to 61 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Main specifications: 6L6 push-pull 60W mono LINE, 1 PHONO system each, MIC4 system W440 x H190 x D350 mm 16.5 kg
Disposal price has been reduced (member price not applicable) 2024/4/16 sales price 25,000 yen This is a compact 2.1 channel speaker that can also be connected to a PC via USB. The control pod has 1 mini jack input system, making it convenient to connect to an i-pod, etc. The sound quality is a lively sound typical of Bose, making it fun to listen to music. Since it is a model announced in 2006, Windows 10 etc. are not compatible with USB input. There are some small scratches and dullness on the exterior. There is stickiness in the remote control unit (Yamato Yuki)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: power cable remote control unit
Main specifications: input USB input, mini jack input external dimensions speaker part W146xH225xD98,5mm woofer part W173xH218xD426mm weight speaker part 850 g, woofer part 8.3 kg
The price has been drastically reduced. 2024/4/2 sales price 36,800 yen ※48kHz, de-emission lamps are out of stock. The luminescence can be confirmed, so there is no problem when using it. It is a convenient D/A converter with volume. The mid and low frequencies are thick, and the range is moderate but it is characterized by analog-like sound quality. It effectively gently relaxes hard sound CD players. The exterior has dullness, small scratches, and missing characters in part 1 (Oikawa Tetsuji)
Maintenance information: 2024.4.2 operation confirmed (44.1/48/96 kHz sound output OK)
Accessories: none
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
Comes with original box! IFI-Audio phono equalizer. It is a compact yet high-spec model equipped with 6 stereo equalizer curves, a load transfer switch for MC cartridges, an ultra-low noise MC stage, a load transfer switch for MM cartridges, and a gain adjustment switch. Serial microP11204 (Tomoho Asaine)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual, power adapter, original box
Main specifications: frequency characteristics 10 Hz to 100 kHz output impedance 110 ohms W68 x H28 x D158 mm weight 198 g
Maintained by the manufacturer! A record player equipped with DP-3000 and DA-307 in a marble cabinet. The phono motor, which has a reputation for its highly accurate rotation and smooth sound quality, and the sturdy marble cab reproduce a heavy and rich analog sound just like the exterior. One with excellent cost performance. The dust cover has line damage, and the rubber mat has deteriorated (Oikawa Tetsuji)
Maintenance information: 2024.4.24 manufacturer maintained (TR replacement with black and rusty feet. speed adjustment, sound output test)
Accessories: none
Main specifications: [DA-307] static balance dynamic damping type total length 332 mm overhang 14 mm compatible cartridge dead weight range 5 to 10 g [DP-3000] servo type direct drive solid rotor type torque motor 33/45 rotation dimensions W530 x H183 x D440 mm total weight approx. 20 kg
*Due to poor LOW volume, the specification has been changed so that only the low frequencies come out at full throttle. Other volumes can be used as normal. A pretty rare Yamaha channel divider. An electronic crossover network equipped with continuously variable crossover frequency, a 3-stage slope selector, and a Q control circuit. For 2 to 3 ways. The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.24 Maintained (switches and volume contact repairs, LOW volume has passed circuitwise because parts cannot be obtained)
Accessories: none
Main specifications: crossover frequency Low-Mid: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz Mid-High: 800 Hz, 1.6 kHz, 3.2 kHz, 6.4 kHz, 12.8 kHz Low-Mid: 35 Hz to 1.13 kHz continuously adjustable by crossover fine adjustment knob, Mid-High: 565 Hz to 18.1 kHz continuously variable W435 × H72 × D349 mm 7.5 kg
Quadra 180mm pole set of 4 The neck is curved rather than straight. There is oxidation on the exterior (Tamura Eiji)
Accessories: head part of the head
It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 312009 (Kanai Hidetsugu)
Maintenance information: 2024.4.23 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 242699 (Kanai Hidetsugu)
Maintenance information: 2024.4.23 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The disposal price has been reduced. Member prices are not applicable. 2024/4/16 sales price 298000 yen ※Brand new hinges are now in stock. An analog player representing LINN. This combination is equipped with a VALHALLA (Valhalla) power supply with the quietest and most accurate drive, and an ITTOK LV2 with firm and high rigidity on the arm! The large number of sounds unique to the LP12, the appeal of the tone, and the rich sense of scale sound quality are attractive. ※The turntable seat is not genuine. Externally, there is oxidation on bumps and weights. (FUJISAWA KOSHI)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: brand new hinges
Main specifications: belt drive floating VALHALLA power supply (33 rotations only) arm/ITTOK LV2/dynamic balance type/cartridge dead weight 2 to 15 g/needle pressure range 0 to 3 g/0.1 g step dimensions W445 x H140 x D356 mm weight 10.5 kg
The price has been drastically reduced! 2024/4/17 sales price 450,000 yen Maintained! Genuine Electri. Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. There are small transformer scratches on the exterior and many disappearing characters on the back. Serial JE10260 (Yonejima Satoshi)
Maintenance information: 2024.4.17 Maintained (The remodeled part has been restored to a state close to its original state. Electrolytic capacitor replacement. Shield case added because it is out of stock. Guide pin hakama exchange. Create and paste the missing character sticker. Output audio check)
Accessories: No accessories
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
This is an MC-type cartridge from Entre. The sound is slightly stiff and sharp, and the sound quality is sharp. The outline and texture of the low frequencies are also firm. There are no particular bends. Serial 39354 (Tamura Eiji)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: MC type output 0.5 mV needle pressure 1.7 g to 2.3 g (appropriate 2.0 g) impedance 6.3 ohms dead weight 5.9 g
Comes with original box! An A-shell oval needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 924201 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 operation confirmed
Accessories: original box, needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
The disposal price has been reduced! (Member prices are not applicable) 2023/4/15 sales price 148,000 yen Overhauled by the manufacturer! The maniacal 300B power amplifier is now in stock in kit type. This is a product that Sun Valley/Kit stores were fully satisfied at the time and took on a new challenge. You can enjoy the sound unique to Sun Valley, which is plump and has a good tone. The exterior is dull, but there are no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.4.15 Maintained by the manufacturer (after fixing production issues, measurement and aging (5H) were completely reworked, and the 300B1 was replaced due to poor output (insufficient output). Since this product is a circuit with a transformer arranged at the input part, the input impedance is designed to be lower than a normal vacuum tube amplifier. Therefore, we recommend using the input volume at the maximum position unless there are special circumstances)
Accessories: power cord, manufacturer measurement table
Main specifications: 300B single power amplifier vacuum tube configuration: first stage 6C6 x 2, output stage 300B with adjustable ham balance only wiring method: all manual wiring bonnet: none Rated output: 8W+8W/8Ω, THD 10% frequency characteristics: 25Hz to 40kHz (1W, -3dB) gain: 25dB power consumption: rated 90W output impedance: 4,8,16Ω (select any system during production) ) Size (including vacuum tube and protrusions) W330 x D280 x H210 mm, weight approx. 12.5 kg
The disposal price has been reduced (member prices are not applicable). 2024/4/20 sales price 168,000 yen with original box. A highly complete pre-main amplifier featuring Marantz's clear, glossy expression. The range is wide and thick, and you can choose any music genre. The fact that it supports balanced input is also attractive. There is a small scratch on the lower part of the volume (Oikawa Tetsuji)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 100W+100W, 3 line inputs, 2 tape terminals, PHONO (MM/MC) balance input, W440 x H165 x D444 mm, 26 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/14 sales price 198,000 yen This model takes the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/4 sales price 198,000 yen SACD player equipped with a discrete DAC. Equipped with a high-performance USB-DAC, it is compatible with a wide range of issues up to 384 kHz/DSD 11.2 MHz. The response is much better than the previous game due to the excellent FPGA. The sound quality, which has an excellent sense of subtlety, is suitable for long-term auditions, and it is an attractive player with a sense of quality with fine sound particles in the air. Serial AQE15200201004 (Mizushima Itsuro)
Maintenance information: 2024.4.4 operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable, original box
Main specifications: Playback frequency characteristics 2 Hz to 50 kHz (SACD), 2 Hz-20 kHz (CD) playback compatible sampling frequency (USB) PCM44.1 kHz to 384 kHz, DSD 2.8 to 11.2 MHz, (COAX) PCM44.1 to 192 kHz W440 × H123 × D419 mm 16.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/10 sales price 450,000 yen The output tube has been replaced with a GE 6550! Genuine Electri Stainless steel chassis version of the 2nd generation reprinted model. It is a model that stands out for its good SNR feel and improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also wonderful. The hood is missing, there are many transformer paint peeling repair marks on the exterior, and the letters on the back have disappeared. Serial E10122 (Murakoshi Yoichi)
Maintenance information: 2017.10.18 Maintained (SW/VR disassembly contacts repolished, oxidized/vulcanized grease coated. Replace all 9P socket pins Voltage check for each part, check input/output waveforms, load test (at 1kHz, 8Ω load: 75W x 2) sound output test)
Accessories: instruction manual (copy)
Main specifications: 6550 push-pull input 2 systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm 30.5 kg
The price has been drastically reduced. 2024/4/19 sales price 698,000 yen Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley is 60 Hz, but the strobe platter is for 50 Hz (Murakoshi Yoichi)
Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning. Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test)
Accessories: insulator (audio technica AT616)
Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/19 sales price 178,000 yen Maintained. A rare Fisher tube control amplifier. The 2 phono inputs are attractive. The high range is decent, but the round, rich, and powerful mid-range is unique to FISHER. The sound is light, bright and friendly. *Only CHANNEL A is valid for EQUALIZATION LP and 78 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (re-strengthening treatment for all selector knobs (*Please do not remove them as much as possible.) Volume disassembly grease up treatment for BASS, main volume disassembly, cleaning and repair (due to the structure, there are some gang errors and sound leaks when narrowed down to a minimum. (If you are concerned, only RIAA 1 and AUX1 can be adjusted with LEVEL SET on the top surface.) Electrolytic capacitor 1000 μF replacement, vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2021.5.15 maintained (repair of poor contact with various parts, correction of lever deformation points, replacement of 30/30/10/10 μF defects, vacuum tube socket and RCA jack caulk repair ※ Since the main volume is a special type with a loudness terminal, some gang errors will occur after 12:00. AUX1 and PHONO can be fine-tuned with the LEVEL SET on the top. *Other operation checks have been made (4 vacuum tube shield cases are missing)
Accessories: Service Manual (English)
Main specifications: Vacuum tube 12AX7, 12AT7, 6V4 using PHONO2 system Dimensions W390 x H120 x D210 mm 6.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/21 sales price 148,000 yen ※ The hinge is damaged, but there are no replacement parts, so this is the current situation. Maintained! Armless PD444 Long arms and short arms can be set, and an original system can be built by placing an arm of your choice on it. The highly rigid chassis and flexible suspension create a tight, easy-to-see sound (Murakoshi Yoichi)
Maintenance information: 2024.4.20 maintenance (power supply circuit, motor servo circuit electrolytic capacitor replacement, power lamp LED replacement, each rotation lock check. (Arm base lock lever with E-ring attachment)
Accessories: motor fixing beads, EP adapter, dust cover, instruction manual, armrest
Main specifications: Direct drive system, quartz control, 30cm, die-cast aluminum turntable, 33/45 rpm, 2 speed switching, W664 x H160 x D392 mm, 22 kg