*Currently sold. Bose's classic full range speaker. This model has a reputation for its well-organized and punchy sound quality. It can be used for a wide range of purposes, from subsystems to surround use. The exterior has a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: full range unit, 6Ω output, sound pressure level 88dB, magnetic-proof type, W270 x H168 x D180 mm, 4k g/unit, MS-2 size, W230 x H47 x D200 mm, 0.65 kg
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Denon speaker stand The height can be changed, so it's convenient. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W355 x H535 to 950 (adjustable height) x D309 mm 3.8 kg
※Accessories such as spikes are missing, so it's cheap. A stand designed for the company's 705 and CM1 bookshelf speakers. It will also fit similar sized third-party speakers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate size 160 x 220 mm W278 x H595 x D368 mm 10 kg/bottle
Maintained! Standard model of 120V commercial power amplifier. It's high watt and can be played with plenty of room even with large speakers. Even though it's for commercial use, there is little coloring and the feeling that the sound flies straight through is very appealing. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance completed (replacement of C and IC etc. within the board, VOL cleaning*Please narrow down the VOL when the power is off)
Accessories: none
Main specifications: 155W+155W (8Ω) SNR 110dB W457 x D254 x H209 mm 18.1 kg
Maintained! Sigma cable included! The highest-grade varicon tuner at the time, which is still highly popular! It uses a high-precision 7-frequency linear varicon, and you are amazed at how vivid it is as if you were listening to the studio sound as it is. Please experience sound quality that cannot be enjoyed with a digital synthesizer tuner, which combines both good sensitivity and sound quality. There are scratches and scratches on the exterior. Serial 47K10029 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (comprehensive inspection, adjustment, and correction of modified parts of the board. Replace deteriorated LEDs and add current limiting resistors and diodes. Fixing and repairing damaged parts of the board. (Overall adjustment of the RF system and MPX system)
Accessories: sigma cable, simple FM antenna
Main specifications: FM dedicated tuner, 7-speed varicon, W480 x H147 x D423 mm, 12.4 kg
Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg
Maintained! One of Sansui's few 2 to 4 way NF type channel dividers. It is a channel divider that pursues basic characteristics and multiple functions, and features a highly saturated tone that is close to JBL speakers. After adjustment, the ceiling panel is clean and the design is excellent. There are scratches and scratches on the exterior. Serial 238070032 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (mode selector disassembly contact polishing. Frequency selector x 6 disassembly cleaning Other volume cleaning. (Replace diodes and transistors to enhance power supply)
Accessories: front panel
Main specifications: 2/3/4 way NF filter channel divider with SNR 90dB or higher cutoff frequency (± 10%) [F1] 60/75/95/120/150/190/240/300/380/480/600/750/950/1.2k/1.5k/1.9k/2.4k/3kHz [F3] 1.5k/1.9k/2.4k/3k/3.8k/4.8k/6k/ 7.5K/9.5K/12K/15kHz low star function installed (turnover 60 Hz/100 Hz) W482 x H88 x D305 mm 6.4 kg
Genuine Diatone DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
The price has been drastically reduced. 2024/4/25 sales price 448,000 yen Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant sound is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration replacement, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration replacement, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 9,800 yen*Currently sold, it is cheap because it is in poor condition. This model has a nicely looking model with units arranged in the center. It has excellent sharpness from low to high frequencies, and is perfect for those who listen to pop music. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 105025A 105025B (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: low frequency 18 cm cone woofer high range 3.5 cm dome tweeter impedance 6 ohm allowable input 70W W225 x H370 x D229 mm 5.4 kg/book
NEW GENERATION LUXMAN A CLASS POWER AMPLIFIER! In addition to the warm sound quality unique to Class A, the range is wide and driving power is sufficient. It has resolution and instantaneous power compatible with the latest speakers, and can easily drive even large speakers. It goes well with recent European speakers. The exterior has line scratches on the upper center of the front and top plate, and several scratches on the upper front corner and upper back corner (Kanai Hidetsugu)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W (8Ω) BLT240W (8Ω) W440 × H230 × D480 mm weight 47.0 kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
Both the interior and exterior have been maintained! Grey version of 4312MK2. A standard monitor that combines responsive, sharp monitor sound with delicate expressive power. You can enjoy the strong, punchy sounds of jazz, rock, soul, etc. The exterior has been beautifully finished due to maintenance. Serial J372-010877 J373-011514 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 maintained (exterior cleaning and touch-up saran frame painting and net replacement tweeter maintenance (magnetic circuit rust removal, gap cleaning, center adjustment, internal urethane replacement, grill and screw coating, rubber ring replacement) mid-maintenance (corn paper repair and coating) ATT cleaning unit detached)
Accessories: saran net
Main specifications: Onboard unit 2213H+104H-3+052Ti 3-way speaker replacement titanium dome tweeter bass reflex structure 93dB 6Ω W362 x H597 x D298 mm 20 kg
※There is no problem with operation, but since it has an air freshener smell, it is inexpensive and is currently sold. A speaker developed in collaboration with European sound designers. It is compact, has good sound, and the soft, gentle treble characteristic of soft dome tweeters is attractive. A model with a wooden cabinet with a calm design that is excellent for space harmony. There are no major scratches that are particularly noticeable on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: jumper cable
Main specifications: 2 way 2 speakers bass reflex type anti-magnetic design (JEITA) 13 cm cone type carbon fiber woofer 2.5 cm/ soft dome type tweeter impedance 6 Ω output sound pressure level 86 dB dimensions W182xH296xD293 mm weight 8.7 kg/1
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, stains, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
The price has been drastically reduced! 2024/5/11 sales price 128,000 yen Maintained! Late QUAD44 with CD input terminal. It's not flashy, but the thick, glossy tone is attractive. In particular, it softens female vocals. Serial Q36114 (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (internal power supply switch contact dirt contact polishing treatment, balance VOL cleaning ~ check OK. Check the other boards and re-solder the holes. (C, R check OK)
2024.5.9 Internal power supply switch contact polishing treatment
Accessories: power cord
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321 x H103 x D203 mm, 4.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/15 sales price 128,000 yen LINN network audio player with an integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. As for the exterior, there are threads and dullness on the top plate. Serial 1234701 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The price has been reduced! 2024/6/1 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been reduced! 2024/5/18 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement. Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
The price has been reduced! 2024/5/25 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1 ohm diaphragm scratch) DCR (b/6.3 ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece
The disposal price has been reduced (member prices are not applicable). 2024/5/14 sales price 158,000 yen The top plate has line damage, so it's cheap. Genuine Rin Japan. A famous player that brought network audio to the world at a high level. Equipped with the same functions as the KLIMAX DS, such as balanced output. The density of sound and the rich amount of information are attractive. The remote control is LINN's general-purpose type (Oikawa Tetsuji)
Maintenance information: 2024.5.14 operation confirmed (PCM/playback up to 192 kHz OK)
Accessories: power cable, universal remote control
Main specifications: support files FLAC, WAV, AIFF, AAC, MP3, WMA W381 x D360 x H80 mm 4.0 kg
The price has been drastically reduced. 2024/5/30 sales price 128,000 yen Maintained! This is a Dynaco tubular control amplifier. It is an amplifier where you can enjoy the warm and comfortable sound unique to vintage. While the microwave feel is moderate, the nostalgic sound with an emphasis on atmosphere has a unique, hard-to-get flavor. There is a feeling of use such as rust stains on the top and sides, and rust etc. on the knobs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (12AX7, 2000 μF electrolytic capacitor, 1 μF replacement, 1/4 W resistance added as a measure to improve switching noise, vacuum tube socket and RCA jack caulking repair, parts check including block capacitors, and operation check with AC 100 to 117 V)
Accessories: none
Main specifications: vacuum tube 12 AX7 x 4, 12 x 4 line input 5 systems phono 1 system (mm), 1 pre-out system, W385 x H134 x D230 mm 7 kg
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
This is PLATANUS MC type phono cartridge. The connection from deep bass to high frequencies is good, and the playback ability is delicate and has a sense of density. You can honestly feel the vivid, dynamic sounds, and even the performer's emotions, and the records you've listened to over and over again until now will play richer and more beautiful music. Magnetic circuits are precision machined and integrated from large chunks of pure iron to enhance rigidity so that vibration energy from the needle tip to the power generation coil is not damaged. The printing has disappeared, and there are small scratches on the body, but the needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual
Main specifications: Playback frequency 10 to 50,000 Hz impedance 2.5 ohms dead weight 16 g
Accupase's best model as an integrated player compatible with SACD. It is a best-selling SACD player that inherits the know-how of advanced models. It is delicate, has a sense of scale, and has a large sound field. While it has the amount of information unique to high-end players, the fine particle feel that feels fine against the skin is truly remarkable. There is a scratch on the top plate. Serial D9Y630 (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: SACD compatible CD player, ultra giter free plus PLL circuit, MDS++ conversion system, D/A converter, HS-Link equipment, frequency characteristics 0.5 to 50 kHz, S/N ratio, 114 dB, W477 x H156 x D394 mm, 27 kg
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual, power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
Comes with original box It is an MC cartridge that uses diamond star rice chips and boron cantilevers, which are also used in higher-level models, and is characterized by outstanding high-pitched fineness and clear sound quality even in the same price range. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: moving coil type, 4 ohm, needle pressure, 1.7 to 2.0 g, output voltage 0.3 mV or more, playback frequency 10 Hz to 30 kHz, solid boron, cantilever, machined aluminum, body, diamond stylus tip, 10.5 g
Denon high-end MC cartridges in the heyday of analog, using amorphous boron pipes. A sound with a wide range and good separation, which has a different trend from the standard 103 series. This is the reference cartridge at the time. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: none
Main specifications: MC type output 0.2 mV 40 ohm boron cantilever solid diamond special oval needle playback band 20 to 75 kHz proper needle pressure 1.0 to 1.4 g dead weight 5.8 g
A small but authentic pre-main amplifier with a built-in FM/AM tuner. Comes with PHONO input (MM/MC), so you can enjoy analog well. It's a perfect match for those who can't play very loudly or for second systems. There are no major noticeable scratches on the main body, but there is corrosion on the battery part of the remote control (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: remote control, power cable
Main specifications: 75W+75W (8Ω) 150W+150W (4Ω) MC/MM compatible AM/FM tuner built-in W300 x H80 x D341 mm 5.5 kg
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
Output transparent sale Orient core output 38W for push pull applications: 6CA7, 6GB8, etc. Primary: 5 kΩ Secondary: 4-6-8-10-16 Ω W118 × H104 × D118 mm approx. 4.5 kg/piece (actual measurement, not including protrusions) There are abrasions and stains in places (Kojima Yosuke)
Accessories: none
※It is inexpensive because it leaves cracks in the VOL. A headphone amplifier that allows you to enjoy the sound of 2 systems: a vacuum tube and a transistor. It has a built-in USB DAC compatible with 24 bit 96 kHz, and it is a blissful item that allows you to immerse yourself in both digital and analog worlds to your heart's content. Scratches on the transformer area are slightly noticeable. Serial 12060066 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed (sound output OK, gaps remain in VOL)
Accessories: instruction manual, power cord
Main specifications: Vacuum tube using a class single headphone amplifier 6BM8 x 2 vacuum tube output 20Ω to 600Ω (45mW to 135mW) transistor output 12Ω to 300Ω (40mW to 135mW) frequency characteristics 10Hz to 50,000 Hz SNR 89dB power consumption 30W size W190 x H150 x D250 mm mass 4.7 kg
※The top surface is severely damaged, so it is inexpensive. This is a custom-made model that fits the size of Acoustic Revive's popular RSS series 4-legged speaker stand to LAT-2. Of course you can use it with other speakers if the size fits (Ryo Mizusaki)
Accessories: spike holder
Main specifications: W300 x H610 x D400 mm top plate W280 x D360 mm 28.5 kg/1 bottle (actual measurement)
Maintained! A hit model in the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a chip on the corner of the side panel. Serial 203719 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 maintained (replaced with a custom-made product due to VR loud sound, speaker relay replaced, MUTIG push SW replaced, other INPUT selector SW, cartridge LOAD SW, TAPE selector SW, SW disassembly contact polishing grease applied, other DC bias DC balance adjustments, confirmation of sound output for each input/output terminal connection)
Accessories: No accessories
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
Although the details of the stand are unknown, it is well-made, and it is a silver iron stand.
It has a simple appearance, so it can be used for a variety of purposes. The exterior has noticeable dirt on the bottom plate and support (Mizusaki Ryo)
Accessories: none
Main specifications: height: 625 mm top plate size W145 x D180 mm bottom plate size W250 x D310 mm weight 5 kg/1 bottle
A slow starter that slowly starts the connected device and protects it from inrush current when the power is turned on. PSE standard product The front panel indicator gradually brightens in sync with the gentle power start, and you can visually confirm the soft start. Serial 0919HA7026120709 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 continuity confirmed
Accessories: No accessories
Main specifications: Output/input capacity 1500 VA, output frequency 50/60 Hz, standby power 0.01W or less, W130 x H94 x D267 mm (without protrusions) 1.8 kg
MM/MC phono equalizer from the handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J17346 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual, power cord, connection cord, power supply unit
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Trio 2-way speakers. A sectional horn is used for the high range, and a free edge is used for the low range woofer. It's an inexpensive yet tasteful sound. The particle board of the hakama deteriorates and falls apart in tatters (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net
Main specifications: 2 way 93dB W392 x H753 x D395 mm 20kg
※The remote control is out of stock, so it's cheap. Marantz CD player with excellent value for money. The smooth sound quality spans from mid to high frequencies, so you won't get tired of listening even when you listen for a long time. This is a bargain machine with a sense of SN that is more than the price. There is dullness and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual
Main specifications: CD player, CD-R/RW/MP3 file playback compatible, HDAM circuit adopted, size W440 x H89 x D317 mm, weight 5.7 kg
The 1.5m pair of speaker cables are connected with crimp terminals, and the Cobra Silver Line is a wide, thick type. Silver wire coating There is strong dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
Replacement needle for M97xe. If you are an M97xe user of the main unit, how about using it as a spare? There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box, instruction manual
Main specifications: needle tip shape 0.2 x 0.7 mil oval needle optimal needle pressure 1.25 g
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
*The attenuator is cheap and is sold as is. This model was measured to improve the quality of the NS-500M. Carbon is used for the woofer. It has a transparent tone typical of Yamaha, has good response, and is made with digital sources in mind. Overall, there is a lot of feeling of use such as small scratches and dullness (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net
Main specifications: 3-way speaker 40Hz-20000Hz 6Ω 100W W374 x H678 x D324.5mm 23.5 kg
Replacement needle for M97xe. If you are an M97xe user of the main unit, how about using it as a spare? On the exterior, there is rust on the metal part of the magnet (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: needle tip shape 0.2 x 0.7 mil oval needle optimal needle pressure 1.25 g
Yamaha's new compact stereo CC-75 series speakers. Equipped with Yamaha active servo technology that reproduces rich deep bass even though it is small. The exterior has a feeling of use such as dullness and small scratches. Serial 646497Y0 646507Y0 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net
Main specifications: 14cm woofer, 5cm tweeter, 1.1 cm super tweeter impedance 6 ohms, playback frequency band 40 Hz to 20,000 Hz, W200 x H330 x D239 mm, 4.3 kg
19-inch rack case, carpeted Compared to conventional rack cases, the CPC series uses a sturdy catch lock, corner bracket, and handle, and is spacious yet kept at a low price with a depth of 57.5 cm. It also works great with heavyweight power amplifiers and samplers! There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: size W53.5 cm x H56 cm x D58 cm, weight approx. 23.9 kg (actual measurement)
19-inch rack case, carpeted Compared to conventional rack cases, the CPC series uses a sturdy catch lock, corner bracket, and handle, and is spacious yet kept at a low price with a depth of 57.5 cm. It also works great with heavyweight power amplifiers and samplers! There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: size W53.5 cm x H56 cm x D58 cm, weight approx. 23.9 kg (actual measurement)