Yamaha's new compact stereo CC-75 series speakers. Equipped with Yamaha active servo technology that reproduces rich deep bass even though it is small. The exterior has a feeling of use such as dullness and small scratches. Serial 646497Y0 646507Y0 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net
Main specifications: 14cm woofer, 5cm tweeter, 1.1 cm super tweeter impedance 6 ohms, playback frequency band 40 Hz to 20,000 Hz, W200 x H330 x D239 mm, 4.3 kg
The price has been drastically reduced! 2024/6/4 sales price 79,800 yen The Silver series is used in woofers that use the new DCF technology. The unit, which has the familiar high-speed texture, is stored in a relatively large enclosure. The low range, which has more volume than the size, and the clear mid to high range are attractive. The exterior has a feeling of use such as dullness. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: jumper cable (general purpose)
Main specifications: 2-way bus reflex type frequency characteristics 40 Hz to 35,000 Hz, crossover frequency 2,800 Hz, efficiency 88 dB, impedance 8 ohms, W230 x H375 x D329 mm, weight 9.3 kg/unit
Both the interior and exterior have been maintained! Grey version of 4312MK2. A standard monitor that combines responsive, sharp monitor sound with delicate expressive power. You can enjoy the strong, punchy sounds of jazz, rock, soul, etc. The exterior has been beautifully finished due to maintenance. Serial J372-010877 J373-011514 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 maintained (exterior cleaning and touch-up saran frame painting and net replacement tweeter maintenance (magnetic circuit rust removal, gap cleaning, center adjustment, internal urethane replacement, grill and screw coating, rubber ring replacement) mid-maintenance (corn paper repair and coating) ATT cleaning unit detached)
Accessories: saran net
Main specifications: Onboard unit 2213H+104H-3+052Ti 3-way speaker replacement titanium dome tweeter bass reflex structure 93dB 6Ω W362 x H597 x D298 mm 20 kg
Comes with original box First arrival at Hi-Fi Hall. Headphones with a focus on sound and design. You can enjoy it regardless of genre with clear lines of sound. It is characterized by being comfortable to wear without the impression that it is being compressed. It is in good condition (Sasaki Shota)
Maintenance information: 2024.6.2 operation confirmed
Accessories: manual, original box, connection cable
Main specifications: diamic sealed 40mm driver frequency characteristics 20 to 22 kHz impedance 30 ohms cord length 1.2 m 230 g
※There is no problem with operation, but since it is cheap, it will be handed over as is. A small 2-way speaker with excellent sense of localization and transparency. The high frequency that extends smoothly is easy on the ears, and although it is a basic model, it has a solid musical sound, which is attractive. There is a stain on the saran net on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: none
Main specifications: 2 way 2 speakers rear bass reflex frequency band 53 Hz to 26.5 kHz crossover 2.9 kHz 6 Ω 86.5 dB W162 x H274 x D228 mm 4.2 kg
The price has been reduced! 2024/6/2 sales price 79,800 yen*Inexpensive because there is unevenness in the display display. A high-resolution USB-DAC, and a DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512). Serial A210J41725016630 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio format AAC · AIF · AIFF · APE · FLAC · M4A (Apple Lossless) ALAC · OGG · WAV · WMA · DSF · DFF maximum sampling frequency PCM192 kHz/24 bit · DSD2.8224 MHz (DSD64) W254 × H76 × D360mm weight 4.7 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. Serial 2172380ZGD00103 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cord
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
The price has been drastically reduced! 2024/6/2 sales price 79,800 yen This is a world-standard club mixer model that won the Best Club Mixer award in 2002 and 2003. Equipped with a 4-band EQ, the 4 dual stereo channels can be freely crossfaded, and are compatible with various mix styles and performance styles. High sound quality is also a factor in popularity. It is dull and has a feeling of use. Serial X262120X172629 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 6 x dual stereo input 4 x RIAA (phono) input 2 x microphone input 4 band EQ high quality P&G/VCA fader analog VCF x 2 channel & master/cue peak meter split cue function booth monitor out frequency characteristics 20hzto40kHz+0/-1dB maximum power consumption 30W size W320 x H105 x D358 mm 5 kg
*The stylus is a JICO VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The price has been reduced. 2024/6/2 sales price 45,000 yen woofer edge softening treatment! A mid-range model with Diatone. The speaker has a smooth, sharp, and firm sound, and has a clear outline of the sound, making it an all-round speaker. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 Maintained (edge softening treatment)
Accessories: saran net
Main specifications: 3-way, 3-speaker sealed system, anti-magnetic playback frequency band, 35Hz to 32kHz, 6Ω, sound pressure level, 91 dB, maximum input, 200W, W359 x H691 x D352 mm, 25.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 1,600,000 yen ※This is a 50 Hz specification. Maintained! A new Studio Technik Dusch suspension on a glass turntable! Fonoico is also a nice setting at 155th in the Franz era. The sharpness, precision of contouring, and a very thick sound are just words. A world-class player who still grabs the hearts of many analog fans and never lets go. Enjoy sounds that can only be experienced with EMT. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Maintained (930ST: motor detached/lubricated, adjusted. Replace deteriorated forward phase capacitors with new ones. Speed adjustment brake felt replacement. Main bearing housing detachment, gasket replacement, bearing ball damage replacement, etc., sealant attachment assembly. Replace the motor bush with a new one that has deteriorated. Replace the deteriorated turntable anti-noise rubber belt with a new one. Replace the idler with a new one that has deteriorated. 155ST: Balance adjustment trimmer resistor defective replacement. NF gain adjustment trimmer resistor noise exchange. Foundation solder deterioration correction. audio measurements. SW/VR cleaning, coat processing. Left and right output adjustment. (Running test OK)
Accessories: power cord, manual (copy), oil, connection cable (1 pair each of XLR and RCA)
Main specifications: idler drive system aluminum die-cast turntable rotation speed 33 1/3, 45, 78 rpm W490 x H234 x D410 mm [tone arm EMT929] dynamic balance type needle pressure range 0 to 5 g [equalizer amplifier 155 st] frequency characteristics 40 Hz to 20,000 Hz input impedance 140 to 200 ohms output impedance 200 to 600 ohms [cartridge TSD-15 ] MC type output voltage 0.15 mV suitable needle pressure 2.5 g impedance 24 ohms
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 2,980,000 yen In addition to full maintenance including the exterior in 2020, the ATT has now been cleaned and inspected all parts, and further brushed up. The Georgian 4, which has an attractive elaborate horn configuration and beautiful furniture-like design, has arrived. It has a structure with a built-in crispy horn to create a unique sound with a rich sense of scale. There is a smell in the room (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (ATT cleaning/inspection of various parts) 2020.2.12 maintained ([main body] exterior cleaning/touch repair, resonance/distortion countermeasures, unit detachment [unit] single-sided woofer recorn, both driver disassembly and cleaning, TW one-sided disassembly and cleaning, TW one-sided coil manufacturing exchange [network] TW capacitor and resistor replacement. *Some capacitors before replacement are difficult to remove, so they are left inside. Frequency characteristic measurement check (~ 42 kHz). Input/output waveform and balance check, sound output check.)
Accessories: none
Main specifications: 15WK, MT-30 (828HF), T35VHF, X336 (300/3500) approx. W860 x D660 x 1350 mm approx. 90 kg
The price has been reduced! 2024/6/2 sales price 69,800 yen This is an EV PA speaker. You can enjoy a clean sound with crisp high frequencies and responsive low frequencies. It's made of resin and is lightweight, so it's easy to carry around. It can be used for a wide range of purposes, such as reeds at home and at events. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, 30 cm woofer impedance, 8 ohm, 300 W, 80 to 25,000 Hz, size W430 x H585 x D314 mm (actual measurement), 15.3 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/2 sales price 1,480,000 yen This is a high-end horn system, avant-garde duo. The high efficiency and high speed MID/HI driver is equipped with 2 active woofers. The sound is amazing while keeping the impactful look intact. The beautiful smooth mid-range sound that flows out of a giant trumpet-like horn is particularly wonderful!! Also, although it is a horn system, the smooth connection from bottom to top with no time errors as far as possible is also noteworthy. The exterior is generally good, although there is a slight feeling of use. Serial 09080415 09080416 (Tomoho Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: Saran net power cord, jumper cable x 4
Main specifications: crossover frequency 220 Hz/2,000 Hz 104 dB 8 Ω built-in power amplifier output 250W W670 × H1550 × D680 mm weight 65 kg
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
The price has been reduced! 2024/6/2 sales price 118,000 yen ROYAL AUDIO TSB-9 with dedicated stand! A popular Pioneer ribbon tweeter. A golden combination of beryllium diaphragms and alnico magnets. In addition to the ultra-high frequency sound quality correction, the expansion of spatial expression, and the wide sound field can be clearly experienced with classical sources. The exterior is dull, and there are scratches on the front mesh and pedestal (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: dedicated stand
Main specifications: input impedance 8 ohms, playback frequency band, 5,000 Hz to 120,000 Hz, maximum input, 100 W, output sound pressure level, 97.5 dB, crossover frequency of 5,000 Hz or more, W134 x H89 x D179 mm, 2.6 kg
※It is inexpensive because there are many scratches on the whole. Although it is small, it is an attractive car with a low range and medium to high range with a solid core in the middle. Bi-wire compatible It is compatible with a wide range of genres, and is recommended not only for pure audio but also for surround sound (Ryo Mizusaki)
Maintenance information: 2024.6.1 sweep test is good
Accessories: nothing
Main specifications: Bi-wiring compatible anti-magnetic design impedance 6 ohms playback frequency band 33 Hz to 45 kHz output sound pressure level 88 dB dimensions W194 x H326 x D318 mm weight 8.4 kg
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.1 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
※There is no problem with the sound output operation, but the LCD is dark and there are places where the characters disappear, so it is inexpensive. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. The exterior has noticeable scratches on the top plate, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cord
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
For the first time in about 8 years, Mysonic Labs ultra-low impedance mono MC cartridges have arrived! It is a cartridge designed to extract as much information as possible from mono LPs. Even though it's clear, you can feel the richness of the relaxed sound, and it makes me reaffirm the goodness of mono LPs. Serial A577 (Tamura Eiji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual, original box, needle cover, brush
Main specifications: Ultra low impedance MC cartridge frequency range 10 Hz to 50 kHz output voltage 0.4 mV impedance 1.2 Ω needle pressure 3 g
The price has been drastically reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency, 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input, 160 W, W650 x H204 x D314 mm, weight: 14 kg
The price has been reduced! 2024/6/1 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
A dust cover of the same size as the C-91 compatible with MICRO's BL-91, BL-99V, and SX-111FV. It is a sturdy construction with a thickness of 4 mm. There is an abrasion on the front (Murakoshi Yoichi)
Accessories: none
Main specifications: W523 x H100 x D410 mm
Fully overhauled on 2023/12/13! A JBL professional series speaker that combines the mid-high range of a biladial horn, which is characterized by wide directional characteristics, and a 38cm woofer with excellent low frequency reproduction. It is possible to combine high range stretchability while maintaining 2-way mid-range energy in response to professional field requests. You can enjoy a variety of music, mainly jazz, with excellent punching power that cannot be heard on current speakers. ※The notation on the terminal board has disappeared (Mizushima Itsuro)
Maintenance information: 2023.12.12 Maintained (exterior repair, polishing, oil finish, front and rear baffle, hakama, horn repair, painting. Saran net replacement. Woofer edge replacement/cone paper coating. Driver magnetic circuit gap cleaning, center adjustment, sound-absorbing material replacement, terminal cleaning. Network frequency characteristic check, ATT cleaning, terminal contact cleaning)
Accessories: saran net
Main specifications: 2 way bi-radial horn 2235H/2421A 93db W556 × H908 × D480 mm 79.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/23 sales price 1,380,000 yen*Woofer saran net is out of stock. Limited edition of 500 units commemorating the 40th anniversary of B&W's founding. Not only are diamond tweeters that reproduce extremely clear, natural high frequencies, but their ability to reproduce low frequencies with a sense of volume is also attractive. The low range is well balanced with the mid to high range, and the localization is clear, and it is expressed with a rich sense of color, especially in classical music. As for the exterior, there is a feeling of use such as a line scratch or dullness on the back. Serial 0002291 0002292 (Asaine Tomoho)
Maintenance information: 2022.12.14 manufacturer maintained (tweeter replacement operation test)
Accessories: spike foot jumper sponge hex wrench
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz 8 ohms crossover frequency 3.8 kHz W230 x H930 x D375 mm 25 kg
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 79,800 yen ※It is cheap because the color fades due to sunburn on one side. A classic bookshelf speaker with a small yet firm sense of volume and texture that makes a good impression. It reproduces music without choosing a genre. There is a feeling of use on the exterior due to sunburn, small scratches, etc. (Tamai Jun)
Maintenance information: 2024.5.31 sound output confirmed
Accessories: saran net jumper plate
Main specifications: Playback frequency band 45Hz to 50kHz 8Ω W165 × H280 × D260 mm 6.7 kg/1
Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
The price has been reduced! 2024/5/31 sales price 29800 yen ※6 month warranty. It is a speaker that was created with the aim of natural sound and gained popularity. There is no sense of emphasis and there is a good balance of strength between the high and low frequencies, which have a high texture, and it makes me feel the high level of musicality. There are scratches on the exterior. Serial 16400837L, 16400837R (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: jumper cable
Main specifications: 2-way, 2-speaker sealed, magnetic-proof type, W270 x H456 x D290 mm, 12.5 kg
Internal and external maintenance has been applied and brushed up! JBL 40th anniversary model! A reprint model of the L101. You can enjoy the excellent sound unique to horn drivers. It has a good response and is a spacious speaker that can be matched with music of a wide range of ages. The traditional lattice net design is also attractive. There is slight discoloration on the marble (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/polishing/oil finish
Front and rear baffles/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. Woofer edge replacement. Driver maintenance (magnetic circuit gap cleaning center adjustment). Network maintenance (frequency characteristic check, ATT cleaning).)
Accessories: lattice
Main specifications: 2 way · 2 speakers · bass reflex system · floor type frequency characteristics 35 Hz to 16,000 Hz directional characteristics (horizontal x vertical) 90 degrees x 40 degrees sound pressure level 92 dB 8 Ω allowable input 150 W crossover frequency 900 Hz enclosure volume 53.5 L W445 x H629 x D320 mm 29.1 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2024/5/31 sales price 138,000 yen Manufacturer maintained! Long-established Luxman compact vacuum tube type premain. The neat design and simple operability make you feel like it's a new era, but it has a sturdy finish that is warm and new, such as adopting a traditional OY type transformer. The sharp vacuum tube sound is attractive. There are line marks on the exterior and top surface, and dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.5.29 manufacturer maintenance (BASS, TREBLE volume replacement. Input selector switch contact cleaning, inspection of each part, general adjustment)
Accessories: remote control, power cable, original box
Main specifications: rated output 12W+12W (6Ω), 10W+10W (8Ω/4Ω) vacuum tube ECC83 x 1, ECC82 x 2, EL84 x 4, 3 input lines, Phono (MM compatible) 1 system frequency characteristics 20 Hz to 50 kHz W297 x H162 x D258 mm 11.5 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This is a spike specification. There are wrinkles on the exterior like wrap marks. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Maintained! This is a regular imported model from Yamagiwa. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays vintage speakers particularly well (Murakoshi Yoichi)
Maintenance information: 2024.5.28 maintenance (each SW/VOL cleaning, pin jack cleaning, lamp replacement, operation check)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
The price has been reduced! 2024/5/30 sales price 28,000 yen*Currently sold. A small speaker with a 16.5 cm woofer. It is a high cost performance speaker that allows you to listen to rich musical sounds that are beyond its size. The full expressive power of the mid-range is attractive. The exterior is good with no conspicuous scratches. Serial 37866 (Yonejima Satoshi)
Maintenance information: 2024.5.30 good sweep test
Accessories: saran net
Main specifications: 2 way impedance 8 ohms efficiency 90 dB playback frequency band 43 to 21,000 Hz W227 x H360 x D230 mm 7 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A unique digital amplifier technology “VL Digital” has been introduced to reproduce high-resolution sound more vividly in a PC environment, making it easy to enjoy as a desktop speaker. The color on the top plate has faded and there are dents (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: 40W+40W (4Ω) playback frequency range 50Hz to 100kHz digital IN sampling frequency 32, 44.1, 48, 96, 192 kHz/24 bit size Rch: W169 × H263 × D240 mm Lch: W169 × H263 × D215 mm Weight Rch: 6.4 kg Lch: 4.3 kg
A rare FR dynamic balance type long arm, which has not arrived in a long time, has arrived! Dynamically balanced Roman arms. It uses a central mass concentration structure and a differential damping mechanism to produce precise and accurate sound. *Phono cable is missing. Serial 161934 (Tamura Eiji)
Maintenance information: 2024.5.29 continuity confirmed
Accessories: original box, instruction manual
Main specifications: Long arm dynamic balance needle pressure range 0 to 3 g total length 379 mm effective length 307 mm overhang 12 mm compatible cartridge 17 to 32 g arm height 36 to 72 mm
The price has been reduced! 2024/5/29 Denon luxury analog player with sales price 89,800 yen. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
The price has been reduced! 2024/5/28 sales price 79,800 yen Maintained by the manufacturer in 2024/4! DENON's pre-main amplifier. It is a mid-size model, and a staple machine with excellent stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 8061507480 (Jun Tamai)
Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.)
Accessories: instruction manual, power cable, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
JVC AV selector. Devices such as 4 systems of players can be connected. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.23 Continuity confirmed
Accessories: none
Main specifications: 4 systems (input 1 to 4 video/audio L/R) output terminal 1 system (video/audio L/R) video frequency band 10 MHz W170 x H40 x D78 mm approx. 187 g
*Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
Refresh yourself with interior and exterior maintenance! A gray-finish model of the king monitor 4343B. The balance between thick, strong mids and responsive bass is perfect. A model that wants to make jazz and rock sound thick, thick, and powerful. It's a lot of exhilarating noises. The exterior has been beautifully finished due to maintenance (Tomoho Asaine)
Maintenance information: 2024.5.27 Maintained (exterior repair/all coated saran frame processing correction repair/net replacement, plate maintenance repair, plate maintenance (edge replacement, cone paper coating, center cap replacement)) midmaintenance (edge replacement, cone paper coating, center cap replacement, driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) Tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement, exterior painting) horn painting, diffuser repair/painting, baffle plate cleaning unit detachable network maintenance: frequency characteristic check, ATT cleaning, switching SW/terminal cleaning/screw replacement)
Accessories: diffuser saran net
Main specifications: 4 way 4 speaker bass reflex crossover 300 Hz/1,250 Hz/9,500 Hz impedance 8 Ω 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg/1
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
A compact and lightweight flat front biladial horn. It keeps horizontal characteristics constant and is useful for correcting driver characteristics (Daiki Goto)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver, 2426H/J, use minimum frequency of 500 Hz, recommended minimum crossover frequency of 630 Hz, made of high-density polyurethane, W448 x H173 x D 174 mm, 1.4 kg
The disposal price has been reduced! (Member price not applicable) 2024/5/26 sales price 298,000 yen Current belt drive type player equipped with Luxman's original tonearm. Dust coverless specification The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
※1 bottle only. The diaphragm has been replaced with a D8R2421. It is an 8 ohm specification. Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 23890 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. (This is a genuine diaphragm, but it comes with D8R2421)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 8 ohms (3.8 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/26 sales price 348,000 yen The current ELAC speakers have arrived! It firmly follows the merits of ELAC up until now, and shines with a higher degree of perfection than ever before. With an expanse that doesn't make you feel the presence of the speaker, and the sound is delicate and bright, it is a practical speaker regardless of genre. There is a small dent in the lower woofer on one side. Serial 31800E000053/31800E000056 (Takasaki Atsushi)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: instruction manual, jumper, spike holder, original box (cushioning material partially broken)
Main specifications: 2.5-way bass reflex type crossover frequency 450/2400 Hz frequency characteristics 30 to 50,000 Hz efficiency 88 dB recommended amplifier power 40 to 300 W rated input 130 W impedance 4 ohms W229 ✕ H1,000 x D266 mm 19.1 kg