Refreshment maintenance was carried out with attention to detail, such as all exterior painting and driver gap cleaning! You can experience a unique sound that makes you feel a hot breath in the dry sound. This time it's a combination of enclosure 828B, woofer 416-8B, driver 802-8D+511B, and network N501-8A. The outstanding vocal band and the sense of energy of the resonating horn are amazing. The exterior has been beautifully finished due to exterior repairs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/full painting, saran net replacement, horn painting and butyl tape removal work, new horn receiver creation. Woofer maintenance (viscoid adjustment, terminal/vis-cleaning) driver maintenance (magnetic circuit gap cleaning/center adjustment, diaphragm screw replacement/lead disconnection repair) network maintenance (frequency characteristic check, ATT cleaning, terminal/vis-cleaning, butyl tape removal work) unit detachment, new horn stay installation processing, new wiring)
Accessories: none
Main specifications: 2 way 2 speaker unit configuration 802-8D+511b・416-8b・N501-8A・828b Dimensions W760 × H1,375 × D610 mm Weight approx. 74.0 kg
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
Internal and external maintenance has been applied and brushed up! JBL 40th anniversary model! A reprint model of the L101. You can enjoy the excellent sound unique to horn drivers. It has a good response and is a spacious speaker that can be matched with music of a wide range of ages. The traditional lattice net design is also attractive. There is slight discoloration on the marble (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/polishing/oil finish
Front and rear baffles/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. Woofer edge replacement. Driver maintenance (magnetic circuit gap cleaning center adjustment). Network maintenance (frequency characteristic check, ATT cleaning).)
Accessories: lattice
Main specifications: 2 way · 2 speakers · bass reflex system · floor type frequency characteristics 35 Hz to 16,000 Hz directional characteristics (horizontal x vertical) 90 degrees x 40 degrees sound pressure level 92 dB 8 Ω allowable input 150 W crossover frequency 900 Hz enclosure volume 53.5 L W445 x H629 x D320 mm 29.1 kg/book
*One SP terminal is a replacement, so it is inexpensive. It hasn't arrived in a long time. This speaker system inherits the DS-205 design philosophy of making small-aperture woofers sound smoothly with a large capacity enclosure. You can enjoy the soft texture and loud sound. Serial 12502/12517 (Murakoshi Yoichi)
Maintenance information: 2024.5.30 maintenance (exterior cleaning/touch repair, 1 terminal replacement)
Accessories: jumper cable (external product)
Main specifications: 2-way bass reflex type 6.3 ohm 87 dB W360 x H925 x D290 mm 25 kg
Maintained! A power amplifier with a separate name for the main part of the SQ38F series. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. SW/VOL disassembly contacts are re-polished, and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (8Ω load 1kHz 30W/30W), input/output waveform confirmation, sound output check performed.)
Accessories: instruction manual (copy)
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
Maintained by the manufacturer! Long-established Luxman compact vacuum tube type premain. The neat design and simple operability make you feel like it's a new era, but it has a sturdy finish that is warm and new, such as adopting a traditional OY type transformer. The sharp vacuum tube sound is attractive. There are line marks on the exterior and top surface, and dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.5.29 manufacturer maintenance (BASS, TREBLE volume replacement. Input selector switch contact cleaning, inspection of each part, general adjustment)
Accessories: remote control, power cable, original box
Main specifications: rated output 12W+12W (6Ω), 10W+10W (8Ω/4Ω) vacuum tube ECC83 x 1, ECC82 x 2, EL84 x 4, 3 input lines, Phono (MM compatible) 1 system frequency characteristics 20 Hz to 50 kHz W297 x H162 x D258 mm 11.5 kg
A rare tone arm from RS Labs that was introduced and sold in a radio technical magazine in 1996. As with linear tracking, the tracking error is zero. The head shell part rotates freely, and the structure automatically adjusts so that tracking errors are always zero. The straight arm lowered from a high position to eliminate downforce is impressive. It is a legendary device that goes beyond the overview of traditional tone arms and reproduces analog (Murakoshi Yoichi)
Maintenance information: 2024.5.31 continuity confirmed
Accessories: original box, main weight, sub weight, hex wrench, instruction manual (English copy)
Main specifications: One-point support arm effective length 215mm
Maintained! A model based on the CDP-502ES with digital outputs and insulators added. It plays a delicate and detailed sound while maintaining the firm low frequencies and good vocal localization typical of Sony. You can see a feeling of use on the exterior, air cap marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 maintenance completed (grease re-coating of each part of the CD mechanism, mechanical drive belt replacement, tact switch replacement, optical system cleaning)
Accessories: none
Main specifications: Unilinear multi-bit D/A converter linear pick mechanism coaxial digital out copper-plated chassis multi-bit machine W430 × H80 × D365 mm 9.0 kg
The neat and precise design using birch wood and the beautiful tone without turbidity are unique to YAMAHA. It makes me want to play it in a tasteful way with a simple pre-main amplifier. The highly transparent, fresh sound fills the room comfortably. There are exterior, sunburn, bruises, and abrasions (Murakoshi Yoichi)
Maintenance information: 2024.5.29 sound output confirmed
Accessories: saran net
Main specifications: 2 way, 2 speakers, sealed system, bookshelf type, anti-magnetic design impedance 6 ohms, 86 dB, W205 x H382 x D285 mm, 9.5 kg/unit
Maintained! This is a regular imported model from Yamagiwa. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays vintage speakers particularly well (Murakoshi Yoichi)
Maintenance information: 2024.5.28 maintenance (each SW/VOL cleaning, pin jack cleaning, lamp replacement, operation check)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Maintained. DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. You can see a feeling of use on the exterior, dullness, rust, scratches, etc. (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (board peeling and re-soldering treatment, block capacitor 30/20/20 μF replacement, film capacitor 0.047 μF → 0.1 μF original, electrolytic capacitor 50 μF, resistance 1W → 1/2 W original replacement, BIAS readjustment/RCA jack and vacuum tube socket caulking repair. Operation check) 2016.2.27 Maintained (AC cord, cord stopper, input terminal, capacitor (47uF100V) resistor (47k, 270k, 470k, 1M) 1/2 w, replacement of 2 vacuum tubes (6550), bias adjustment)
Accessories: copy of instruction manual
Main specifications: tubular mono power amplifier using vacuum tube KT88/5AR4/6AN8A output 60W/140W W229 × H190 × D229 mm 11.5 kg
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
Maintained! SPU round needle type with built-in transformer. This is a shell from the Knicks era. The rich, rich SPU-like sound is attractive. The built-in transformer gives the impression that transparency and clarity have been improved. Needle cover missing. The exterior has a feeling of use such as dullness. Serial 340898 (Murakoshi Yoichi)
Maintenance information: 2024.5.29 Maintained (cantilever, damper adjustment, rubber cover replacement, cleaning)
Accessories: none
Main specifications: MC type with built-in transformer output 10 mV needle pressure 3 to 4.5 g dead weight 32 g
Self-made line selector with unknown details. It can be used with 2 input systems, 3 output systems, or 3 input systems, and 2 output systems. The exterior is well-built. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: W95 x H95 x D165 mm 778 g (actual measurement)
Technics MM Cartridges It was adopted as an accessory to the company's record player. It has a neutral, deafening sound, and is compatible with various music genres (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.2 mV frequency range 20 to 25 kHz needle pressure 1.75 g dead weight 6 g
Speaker cable, 1.4m pair of untreated silver-coated H-OFC conductors, double shielded, 2-core structure, Ortophone's high C/P series speaker cable. The high pitch and smoothness are attractive. There is friction and dirt on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.5.29 continuity confirmed
Accessories: none
Fine gold series with 2.0m pair of RCA cables made of 99.997% OFC material. This is an entry-class, easy-to-use cable. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 continuity confirmed
Accessories: none
※1 bottle only. The RCA cable uses a 0.6 m 6N-7N hybrid conductor and twin core structure. The cable is thick and powerful in the mid-range, making it a great cable for vintage audio. There is slight dullness on the plug part (Murakoshi Yoichi)
Maintenance information: 2023.7.20 Continuity confirmed
Accessories: none
This is an attractive quad bookshelf type speaker with a beautiful finish and rich musical expressiveness. The calm stringed instruments and highly textured piano expressions are suitable for classical music. The exterior has a broken dowel in the upper left corner of the saran net on one side, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: saran net, jumper plate
Main specifications: 86dB 6Ω 45Hz to 28,000 kHz W190 × H310 × D243 mm Weight 6.3 kg
The price has been reduced. 2024/5/29 sales price 108,000 yen This is an MC-only phono equalizer that was sold to commemorate the 25th anniversary of the birth of the LP12. It is designed so that the sound of the LP12 can be enjoyed at its best by simplifying the signal path and installing a low noise power supply. The center of gravity is low and the sound quality is high in texture, but surprisingly, it is compatible with the SPU and can be used for a wide range of purposes. There is an appearance, dullness, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable
Main specifications: Phono equalizer for MC cartridges, input level 150 μ/480 μV, input cae impedance 1500/4.7 nF, W320 x H80 x D326 mm, 1.5 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. Large finger mount You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 6.8 g
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
Manufacturer's maintenance completed! Denon's highest-model phono motor at the time. They are orthodox and have a high sense of stability, such as a turntable with a double structure and DENON's traditional AC servo motors. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 manufacturer maintenance (head gap adjustment, micro SW replacement, power circuit capacitor, strobe lighting circuit capacitor replacement, etc., inspection operation test of each part)
Accessories: none
Main specifications: quartz lock direct drive, outer rotor, 3-phase AC servo motor, double structure, die-cast aluminum turntable, compatible with 33 and 45 rotations, approx. 10 kg
Maintained! A model equipped with a variable switching phono, an RF official imported product. This is a high-end preamp that made the CELLO name known. It is no exaggeration to say that the elegant and beautiful tone, which is precise and delicate, has outstanding expressiveness and unique luster, is a work of art. A wood case is included, but the mounting screws are missing. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 maintenance completed (power supply unit and main body capacitor replacement, volume dismantling and cleaning, pin jack correction, specification inspection, various operation inspections)
Accessories: power cord, connection cord, original box, wood case
Main specifications: input imbalance (RCA) 8 systems/PHONO (MM/MC) 1 system/balance (Fisher) 1 system output unbalance (RCA) 2 system/balance (Fisher) 1 system body/W515 x H140 x D370 mm weight 10.1 kg power supply/W240 x H100 x D335 mm weight 5.1 kg
※The current situation is that there is a slight tear on the cone paper on one side and a dent in the center cap. Fostex 10cm full range. A speaker unit developed as a successor to the FE103en. A three-dimensional sound field expression has been achieved while keeping the bright and clear tone characteristic of the series intact. In addition to the appearance described above, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, original box, gasket
Main specifications: 8Ω FS to 22kHz 88.5 dB W106 × H47 × D106 mm 566 g
*Set of 2 TAOC audio board Five-layer structure of melamine veneer, cast iron powder, high density wood board, and phenolic laminated board. Of course, it's just the right size for a tall boy type speaker, or for placing it under an amplifier or CD player. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H40 x D450 mm 6.5 kg
This is a small SUPEX level gauge that is easy to use. Having one is convenient for leveling a record player (Kobayashi Hitoshi)
Accessories: none
Main specifications: actual size: diameter: 22 x height: 20 mm, dead weight: 10 g
This is Belldream Cartridge Keeper BD-CK2A. It comes with a headshell and can hold 2 cartridges. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W90 ✕ H120 ✕ D90mm 160g
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W51 x H85 x D51 mm 36.3 g (actual measurement)
DENON DL-301/2 case You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W67 x H80 x D41 mm 54.8 g (actual measurement)
An audio selector that allows you to easily switch between a total of 3 devices. Comes with a front input terminal. Compatible with φ3.5 stereo mini You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 3 input terminals (φ3.5 mm stereo mini, audio L/R), 1 output terminal (φ3.5 mm stereo mini, audio L/R) W190 x D85 x H32 mm approx. 210 g
JVC AV selector. Devices such as 4 systems of players can be connected. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.23 Continuity confirmed
Accessories: none
Main specifications: 4 systems (input 1 to 4 video/audio L/R) output terminal 1 system (video/audio L/R) video frequency band 10 MHz W170 x H40 x D78 mm approx. 187 g
Unspecified pair of black granite boards. There are slits in the front and back that seem to be for tuning purposes. If you're looking for this size, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W245 x H15 x D245 mm 2.8 kg
*Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
Cover is missing. Unspecified digital needle pressure gauge. It is a digital needle pressure gauge that can measure up to 5g in 0.01 g increments. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: none
Unspecified head shell. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 11g
SANSUI headshell Model number and details are unknown. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: dead weight 9g
※It is inexpensive because there are many abrasions, stains, etc., and there is a feeling of use. A classic disc stabilizer. Moderate weight gives a sense of stability to record playback (Kobayashi Hitoshi)
Accessories: none
It is a set of a directional velvet brush with high cleaning performance and a cleaning liquid that suppresses static electricity, but there is no liquid left. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Key Specifications: Cleaning Kit Wide Type
This is a wet cleaner for cords. A wide type that can wipe down the surface of an LP record. In addition to the appearance and yellowing, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
A record cleaner that indirectly imparts moisture to the case by adsorbing liquid onto the sponge inside the case. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none