In addition to full maintenance including the exterior in 2020, the ATT has now been cleaned and inspected all parts, and further brushed up. The Georgian 4, which has an attractive elaborate horn configuration and beautiful furniture-like design, has arrived. It has a structure with a built-in crispy horn to create a unique sound with a rich sense of scale. There is a smell in the room (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (ATT cleaning/inspection of various parts) 2020.2.12 maintained ([main body] exterior cleaning/touch repair, resonance/distortion countermeasures, unit detachment [unit] single-sided woofer recorn, both driver disassembly and cleaning, TW one-sided disassembly and cleaning, TW single-side coil manufacturing exchange [network] TW capacitor and resistor replacement. *Some capacitors before replacement are difficult to remove, so they are left inside. Frequency characteristic measurement check (~ 42 kHz). Input/output waveform and balance check, sound output check.)
Accessories: none
Main specifications: 15WK, MT-30 (828HF), T35VHF, X336 (300/3500) approx. W860 x D660 x 1350 mm approx. 90 kg
A preamp for the company's high-end audio Reference series. In addition to adopting a fully balanced amplification system with positive and negative symmetry from input to output in the transmission circuit, accurate transmission of audio signals is achieved by arranging the same boards on the left and right audio circuits to form the same circuit on the left and right. There are no visible scratches on the exterior, etc., and it is good with just dullness. Serial NKPK000049JP (Takasaki Atsushi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: remote control, copy of instruction manual, power cable, connection cable, original box
Main specifications: input terminal balance ☓ 3 unbalance ☓ 3 output terminal balance ☓ 2 unbalance ☓ 2 body dimensions W450mm ☓ H150mmD440mm 29kg power supply dimensions W220 ☓ H185 ☓ D430 mm 15 kg
Maintained! A model equipped with a variable switching phono, an RF official imported product. This is a high-end preamp that made the CELLO name known. It is no exaggeration to say that the elegant and beautiful tone, which is precise and delicate, has outstanding expressiveness and unique luster, is a work of art. A wood case is included, but the mounting screws are missing. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 maintenance completed (power supply unit and main body capacitor replacement, volume dismantling and cleaning, pin jack correction, specification inspection, various operation inspections)
Accessories: power cord, connection cord, original box, wood case
Main specifications: input imbalance (RCA) 8 systems/PHONO (MM/MC) 1 system/balance (Fisher) 1 system output unbalance (RCA) 2 system/balance (Fisher) 1 system body/W515 x H140 x D370 mm weight 10.1 kg power supply/W240 x H100 x D335 mm weight 5.1 kg
Everything from exterior painting to driver gap cleaning has been refreshed and maintained with attention to detail! 4343 original unit, 4343GY by All Alnico! A famous machine that clearly expresses a rich low-frequency sound and a sense of depth, and continues to be popular even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-microphone regardless of age or genre. Serial 14004/14414 (Takasaki Atsushi)
Maintenance information: 2023.4.17 Maintained (exterior repair/gray paint,
Front and rear baffle repair/coating, saran net replacement, frame repair, woofer maintenance (edge replacement, cone paper coating), mid maintenance (edge replacement, cone paper coating), driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal contact cleaning), tweeter maintenance (horn disassembly cleaning, magnetic circuit rust removal/gap cleaning, terminal contact cleaning), Network maintenance (damaged terminal (x1) replaced from stock parts. Terminal rust removal, pickling, insulation bush & mounting screw replacement. There is evidence that the ATT was replaced by the user, but the round ATT was replaced with a new one with a square ATT with high power, the large ATT was disassembled and cleaned, contact grease was applied, and the wiring was re-soldered. INT/EXT switch-over SW contact cleaning A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveform and balance, check sound output), detach the unit)
Accessories: saran net, diffuser
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Carefully maintained, including replacing glass panels with new ones! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The legs are alternative rubber feet (adhesive). You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (vacuum tube cover, replacement, front panel replacement, 0.01 μF, etc., replacement, 6 electrolytic capacitors, 40 μF replacement, resistance, 1 W and 1/2 W replacement, 8 switching noise improvement measures, 1/4 W, 6 additional resistors, vacuum tube socket and RCA jack, re-caulking repair, etc. Operation checked with AC 100 to 117 V (if you are concerned about sound leakage when volume is minimal, on the top Please narrow down OUT LEVEL))
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Refreshment maintenance was carried out with attention to detail, such as all exterior painting and driver gap cleaning! You can experience a unique sound that makes you feel a hot breath in the dry sound. This time it's a combination of enclosure 828B, woofer 416-8B, driver 802-8D+511B, and network N501-8A. The outstanding vocal band and the sense of energy of the resonating horn are amazing. The exterior has been beautifully finished due to exterior repairs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/full painting, saran net replacement, horn painting and butyl tape removal work, new horn receiver creation. Woofer maintenance (viscoid adjustment, terminal/vis-cleaning) driver maintenance (magnetic circuit gap cleaning/center adjustment, diaphragm screw replacement/lead disconnection repair) network maintenance (frequency characteristic check, ATT cleaning, terminal/vis-cleaning, butyl tape removal work) unit detachment, new horn stay installation processing, new wiring)
Accessories: none
Main specifications: 2 way 2 speaker unit configuration 802-8D+511b・416-8b・N501-8A・828b Dimensions W760 × H1,375 × D610 mm Weight approx. 74.0 kg
Fully overhauled on 2023/12/13! A JBL professional series speaker that combines the mid-high range of a biladial horn, which is characterized by wide directional characteristics, and a 38cm woofer with excellent low frequency reproduction. It is possible to combine high range stretchability while maintaining 2-way mid-range energy in response to professional field requests. You can enjoy a variety of music, mainly jazz, with excellent punching power that cannot be heard on current speakers. ※The notation on the terminal board has disappeared (Mizushima Itsuro)
Maintenance information: 2023.12.12 Maintained (exterior repair, polishing, oil finish, front and rear baffle, hakama, horn repair, painting. Saran net replacement. Woofer edge replacement/cone paper coating. Driver magnetic circuit gap cleaning, center adjustment, sound-absorbing material replacement, terminal cleaning. Network frequency characteristic check, ATT cleaning, terminal contact cleaning)
Accessories: saran net
Main specifications: 2 way bi-radial horn 2235H/2421A 93db W556 × H908 × D480 mm 79.5 kg
From exterior painting to gap cleaning, it has been refreshed and maintained with attention to detail! This is a 612C monitor speaker with a refined masterpiece 612A system. The unit is an early model 604-8G. The thick, unsluggish tone centered around the middle range is perfect for vocals. Since localization is also precisely determined, it is a practical and easy-to-use speaker (Takasaki Atsushi)
Maintenance information: 2024.2.8 Maintained (exterior repair/polishing/full painting, network mounting hole processing, saran net replacement. Unit maintenance (gasket replacement, input terminal contact cleaning, high frequency side disconnection repair/magnetic circuit rust removal/gap cleaning/center adjustment) network maintenance (frequency characteristic check, panel float bonding, ATT disassembly cleaning, input terminal contact cleaning) terminal cleaning)
Accessories: saran net
Main specifications: coaxial 2-way speaker unit 38cm coaxial impedance 8Ω 104dB crossover frequency 1.5kHz W648 × H749 × D509 mm 54.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
It has been refreshed and maintained to brush up by replacing block capacitors, etc.! Kit version of the masterpiece model 7. The parts that can be obtained at the beginning of sale remain the original, and those that are missing use similar parts, and it is a 25th anniversary model that appeared with almost the same structure as the original. As a vacuum tube preamp, you can hear a slightly different tone from other models. There are line scratches on the wood case on the exterior. Serial F030105 (Murakoshi Yoichi)
Maintenance information: 2024.5.9 maintenance (main volume disassembly cleaning repair, selector disassembly contact strengthening repair, block capacitor, fuse holder cap replacement, short pin addition, vacuum tube socket and RCA jack re-caulking repair. Operation has been checked with AC100V) In order to bring the volume curve closer to the original, the OUT LEVEL on the back is narrowed down. 2018.7.15 Maintained (vacuum tubes 12AX7 x 2 replaced, oil capacitors 0.47 μF replaced with BlackBeauty, replaced with 0.33 μF x 2 film capacitors. RCA jack earth reinforcement and caulk repair. Vacuum tube socket caulk repair. Other operations have been checked)
Accessories: none
Main specifications: kit model 12AX7 × 6 W453 × H185 × D260 mm 7.9 kg
The price has been drastically reduced. 2024/4/25 sales price 448,000 yen Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant sound is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration replacement, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration replacement, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
Internal and external maintenance has been applied and brushed up! JBL 40th anniversary model! A reprint model of the L101. You can enjoy the excellent sound unique to horn drivers. It has a good response and is a spacious speaker that can be matched with music of a wide range of ages. The traditional lattice net design is also attractive. There is slight discoloration on the marble (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/polishing/oil finish
Front and rear baffles/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. Woofer edge replacement. Driver maintenance (magnetic circuit gap cleaning center adjustment). Network maintenance (frequency characteristic check, ATT cleaning).)
Accessories: lattice
Main specifications: 2 way · 2 speakers · bass reflex system · floor type frequency characteristics 35 Hz to 16,000 Hz directional characteristics (horizontal x vertical) 90 degrees x 40 degrees sound pressure level 92 dB 8 Ω allowable input 150 W crossover frequency 900 Hz enclosure volume 53.5 L W445 x H629 x D320 mm 29.1 kg/book
Maintained! This is a regular imported model from Yamagiwa. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays vintage speakers particularly well (Murakoshi Yoichi)
Maintenance information: 2024.5.28 maintenance (each SW/VOL cleaning, pin jack cleaning, lamp replacement, operation check)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
The price has been reduced. 2024/5/26 sales price 228,000 yen 2023/10 manufacturer maintenance completed! The flagship stereo power amplifier model with a KT120 push-pull configuration by Sun Valley. An output transformer with a bifiler-wound custom-made by Hashimoto Electric is used. It achieves both a wide range of sound that is pleasant to listen to. This is a powerful power amplifier that can make even vintage speakers sound with modern speakers. The exterior is dull (Hiura Katsuji)
Maintenance information: 2023.10.20 manufacturer maintenance (PT replacement with a brand new product, carrying out energization after returning the remodeled point to a normal state, measurement of voltage of each part and measurement of various characteristics, music playback test)
Accessories: power cable
Main specifications: used vacuum tube KT120 push-pull 55W+55W KT120 x 4 (TUNG-SOL), 12BH7A x 4 (ELECTRO HARMONICS), CV4003 x 2 W400 x H380 x D220 mm 32 kg
Internally and externally maintained! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. There is a very slight dent in the tweeter grill, and there are repair marks on the side (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound is captivating. The exterior has been beautifully finished due to maintenance. Serial 32547 32298 (Murakoshi Yoichi)
Maintenance information: 2024.5.16 maintenance (exterior repair/cleaning, saran net cleaning, repasting, ATT cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
The disposal price has been reduced. Member discounts are not applicable. 2024/5/25 sales price 248,000 yen It now uses Alnico, which can be called premium, and the tuning that emphasizes musicality that is comfortable to listen to throughout the entire area makes a good impression. The visuals are also compact and elegant, and have a sense of luxury. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net, jumper cable
Main specifications: 2WAY sealed 35mm pure silk ring diaphragm tweeter 170mm Kurt Mueller cone woofer rated input 50W maximum input 150W output sound pressure level 87dB impedance 6Ω crossover 3,500 Hz playback band 40 to 50,000 Hz W224 x H380 x D319 mm 10.8 kg
Maintained in 2023. After all, the warm, and glossy sound quality is excellent for stringed instruments. It has a soft and vivid sound not found in transistors, making it perfect for listening for long periods of time. In addition to noticeable scuffs and paint peeling on the exterior and transformer area, dullness and a feeling of use can be seen. Serial F0800283 (Murakoshi Yoichi)
Maintenance information: 2023.7.23 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 25W+25W) input/output waveform confirmation sound output check performed gain VOL NFB switching SW disassembly contact refinement to prevent oxidation and sulfation grease coating input/output waveform confirmation distortion load test (1 kHz (25W+25W at sine wave 8Ω load) sound output test)
Accessories: copy of instruction manual
Main specifications: 50CA10 push-pull output 30W+30W W410 x H183 x H160 mm 13.8 kg
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
Maintained! A power amplifier with a separate name for the main part of the SQ38F series. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. SW/VOL disassembly contacts are re-polished, and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (8Ω load 1kHz 30W/30W), input/output waveform confirmation, sound output check performed.)
Accessories: instruction manual (copy)
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
*One SP terminal is a replacement, so it is inexpensive. It hasn't arrived in a long time. This speaker system inherits the DS-205 design philosophy of making small-aperture woofers sound smoothly with a large capacity enclosure. You can enjoy the soft texture and loud sound. Serial 12502/12517 (Murakoshi Yoichi)
Maintenance information: 2024.5.30 maintenance (exterior cleaning/touch repair, 1 terminal replacement)
Accessories: jumper cable (external product)
Main specifications: 2-way bass reflex type 6.3 ohm 87 dB W360 x H925 x D290 mm 25 kg
The A3500 vacuum tube power amplifier has been refreshed by thorough maintenance down to the smallest details, such as volume disassembly and polishing. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. As for the exterior, paint deterioration and peeling can be seen on the transformer on one side, and there is a feeling of use such as dullness, small scratches, etc., and there is a dent in the hood. ※3-pole tube connection specification. 20W+20W (actual measurement) is output as specified by the manufacturer (Takasaki Atsushi)
Maintenance information: 2023.2.3 maintained (main tube (6CA7) replacement vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, complete disassembly of semi-fixed VR replacement power input gain volume, contact polishing, anti-oxidation/sulfation grease coating load test (8Ω load 1kHz 20W+20W) input/output waveform confirmation sound output check performed)
Accessories: copy of the manual
Main specifications: 20W+20W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg
Maintained. DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. You can see a feeling of use on the exterior, dullness, rust, scratches, etc. (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (board peeling and re-soldering treatment, block capacitor 30/20/20 μF replacement, film capacitor 0.047 μF → 0.1 μF original, electrolytic capacitor 50 μF, resistance 1W → 1/2 W original replacement, BIAS readjustment/RCA jack and vacuum tube socket caulking repair. Operation check) 2016.2.27 Maintained (AC cord, cord stopper, input terminal, capacitor (47uF100V) resistor (47k, 270k, 470k, 1M) 1/2 w, replacement of 2 vacuum tubes (6550), bias adjustment)
Accessories: copy of instruction manual
Main specifications: tubular mono power amplifier using vacuum tube KT88/5AR4/6AN8A output 60W/140W W229 × H190 × D229 mm 11.5 kg
Maintained by the manufacturer! Long-established Luxman compact vacuum tube type premain. The neat design and simple operability make you feel like it's a new era, but it has a sturdy finish that is warm and new, such as adopting a traditional OY type transformer. The sharp vacuum tube sound is attractive. There are line marks on the exterior and top surface, and dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.5.29 manufacturer maintenance (BASS, TREBLE volume replacement. Input selector switch contact cleaning, inspection of each part, general adjustment)
Accessories: remote control, power cable, original box
Main specifications: rated output 12W+12W (6Ω), 10W+10W (8Ω/4Ω) vacuum tube ECC83 x 1, ECC82 x 2, EL84 x 4, 3 input lines, Phono (MM compatible) 1 system frequency characteristics 20 Hz to 50 kHz W297 x H162 x D258 mm 11.5 kg
A rare tone arm from RS Labs that was introduced and sold in a radio technical magazine in 1996. As with linear tracking, the tracking error is zero. The head shell part rotates freely, and the structure automatically adjusts so that tracking errors are always zero. The straight arm lowered from a high position to eliminate downforce is impressive. It is a legendary device that goes beyond the overview of traditional tone arms and reproduces analog (Murakoshi Yoichi)
Maintenance information: 2024.5.31 continuity confirmed
Accessories: original box, main weight, sub weight, hex wrench, instruction manual (English copy)
Main specifications: One-point support arm effective length 215mm
Maintained! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
The price has been reduced. 2024/5/30 sales price 128,000 yen*It is cheap because it is in poor condition such as being scratched or the saran net peeling. It is tightly packed with a strong sealed enclosure and a high-quality unit, and the sound is moist and calm. If you drive with an amplifier with a strong drive, you can enjoy the dense mid and low frequencies. The exterior has scratches, scratches, and creases. Serial 02093/02092 (Murakoshi Yoichi)
Maintenance information: 2024.5.29 sound output confirmed
Accessories: saran net
Main specifications: impedance 8Ω output sound pressure level 85dB W220 × H390 × D255 mm 15 kg
The price has been drastically reduced. 2024/5/17 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. In addition to large dents on one side, there is a light feeling of use and dullness (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
The price has been reduced. 2024/5/30 sales price 128,000 yen Maintained! This is a Dynaco tubular control amplifier. It is an amplifier where you can enjoy the warm and comfortable sound unique to vintage. While the microwave feel is moderate, the nostalgic sound with an emphasis on atmosphere has a unique, hard-to-get flavor. There is a feeling of use such as rust stains on the top and sides, and rust etc. on the knobs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (12AX7, 2000 μF electrolytic capacitor, 1 μF replacement, 1/4 W resistance added as a measure to improve switching noise, vacuum tube socket and RCA jack caulking repair, parts check including block capacitors, and operation check with AC 100 to 117 V)
Accessories: none
Main specifications: vacuum tube 12 AX7 x 4, 12 x 4 line input 5 systems phono 1 system (mm) 1 pre-out system W385 x H134 x D230 mm 7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/23 sales price 148,000 yen This is a Venere series bookshelf model designed with a sharp form, breaking away from conventional classical styles. It is a speaker with an excellent glossy, smooth high frequency, and you can enjoy a particularly beautiful sound with stringed instruments and vocals. Serial 0077513 0077513 (Yamato Yuki)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: Saran net original box jumper plate
Main specifications: Wave reflex bookshelf type unit tweeter 29 mm high resolution silk soft dome woofer 180 mm cone type frequency characteristics 45 Hz to 25,000 Hz output sound pressure level 88 dB/w/m 6 ohms size W246 x H449 x D336 mm 7.0 kg (1)
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 138,000 yen ※It is cheap because the condition is not good. Next-generation model of the L-550, a famous pure Class A amplifier that has been maintained by the manufacturer (*PHONO1 cannot be used due to a broken equalizer board). The very smooth, deafening warm color sound perfectly matches the delicate sound quality of pure A grade. It also has a reputation for analog sound, and thick sound quality can be obtained with both MM/MC. There is a feeling of use due to appearance, dullness, abrasions, scratches, paint deterioration, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 manufacturer maintenance completed (equalizer selector switch disassembly cleaning, correction due to broken equalizer board, other contact cleaning, general adjustment*PHONO1 cannot be used due to broken equalizer board)
Accessories: copy of instruction manual
Main specifications: pure A grade 50W+50W (8Ω) PHONO (MM/MC) PHONO/CD straight circuit system W453 x H174 x D470 mm weight 20 kg
The price has been reduced. 2024/5/29 sales price 108,000 yen This is an MC-only phono equalizer that was sold to commemorate the 25th anniversary of the birth of the LP12. It is designed so that the sound of the LP12 can be enjoyed at its best by simplifying the signal path and installing a low noise power supply. The center of gravity is low and the sound quality is high in texture, but surprisingly, it is compatible with the SPU and can be used for a wide range of purposes. There is an appearance, dullness, threads, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable
Main specifications: Phono equalizer for MC cartridges, input level 150 μ/480 μV, input cae impedance 1500/4.7 nF, W320 x H80 x D326 mm, 1.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/17 sales price 128,000 yen ※Depending on the arm base, the mounting position of the arm is slightly close to the shaft side. Since the arm is long, please remove the dust cover for playback. Comes with SAEC arm stabilizer AS-500! A record player that is highly regarded for its smooth rotation and the effectiveness of the insulator's suspension. The WE-308 arm features a double knife edge for sharp sound and accurate sound image localization. It is a combination of LUX's smooth and quiet motor and SAEC arms that cut sharply into the sound source, so you can fully enjoy the fun and depth of analog. Additional rubber feet have been attached to the legs to prevent the AS-500E. The exterior is dull and has small scratches. Serial G8903281 (Murakoshi Yoichi)
Maintenance Information: 2020.6.2 Maintained (created with strobe circuit LED. diode installation. Electrolytic capacitor replacement. Power circuit film capacitor replacement. (Inside Force cancellation weight exchange)
Accessories: phono cable
Main specifications: PD-131 direct drive system 8 pole 24 slot brushless DC servo motor W472 x H160 x D372 mm weight 12 kg WE-308 double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g cartridge weight range: 5.5 to 12.5 g
The disposal price has been reduced. Member discounts are not applicable. 2024/3/20 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. You can see a feeling of use such as appearance, dullness, abrasions, scratches, stains, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 maintenance (DIN connector replacement, resistance in both other channels, capacitor replacement, each Tr all check)
Accessories: connection cable, power cable, instruction manual (copy)
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. There is a feeling of use such as dullness. Serial 3121 (Takasaki Atsushi)
Maintenance information: 2024.3.22 maintained (INPUT DIN4P and AC connector replacement, DIN4P-RCA x 2 (1m) creation, internal check, DC cut C, coupling C replacement, RCH offset VOL exchange, constant change in constant voltage circuit)
Accessories: copy of manual, power cord, connection cord
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
Maintained! A popular DENON control amplifier for its excellent phono equalizer. MC head amplifiers are famous for their quality, and they fully draw out the amount of information in the cartridge. It's a neat sound typical of a domestic amplifier with clear yet solid mid-range sound. In addition to the exterior, noticeable scuffs on the top plate, scratches on the VOL dial, and stains on the back of the front flap, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.2.16 Maintained (main volume, balance volume internal contact cleaning, cleaning. All input terminals are polished and cleaned, electrolytic capacitor replaced, PHONO2 impedance changeover switch disassembly, contact polishing, cleaning, and grease is applied. (Check the operation of each input/output)
Accessories: instruction manual (copy)
Main specifications: CR equalizer with 3 PHONO inputs MC head amplifier W455 x H132 x D357 mm 10.5 kg
The price has been reduced. 2024/5/25 sales price 99,800 yen with 2447 exclusive horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: stand
Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
The disposal price has been reduced. Member prices are not applicable. 2024/3/7 sales price 128,000 yen Maintained! A crisp, bright, and sharp sound typical of Marantz from the 1970s. Exactly, it's an American sound on the west coast. The design is also a simple design typical of US Marantz. ※The leg is out of stock. The exterior has dullness and small scratches. Serial 4180 (Yonejima Satoshi)
Maintenance information: 2024.3.7 Maintained (single CH power stage transistor replacement. Screwdriver transistor resistor replacement. Drive Tr Capacitor Replacement Contact polishing, aging test)
Accessories: No accessories
Main specifications: 125W+125W (8Ω) W445 × H170 × D265 mm 14.8 kg
The price has been reduced. 2024/5/10 sales price 99,800 yen Maintained. professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. There is a feeling of use such as a scuff on the top plate. Serial Q002959 (Mizushima Itsuro)
Maintenance information: 2024.2.15 maintenance (internal Tr, C, R check, output phase correction resistor, DC IN± bypass C, gain setting C, CDS replacement within the INPUT photocoupler. INPUT VOL CLEANING Output cable XLR cannon attached)
Accessories: copy of instruction manual, power cable, speaker cable
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg