The disposal price has been reduced! Member prices are not applicable. 2026/1/16 sales price 498,000 yen Both inside and outside have been maintained and brushed up! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is beautifully finished. Serial 01159/01167 (Tamura Eiji)
Maintenance information: 2026.1.16 Maintained (exterior repair/polishing/painting. Front and rear baffle repair and painting. Saran net cleaning/coloring Unit maintenance: low frequency side viscoid sagging removal/terminal cleaning, high frequency side magnetic circuit gap cleaning/center adjustment, terminal cleaning. Network maintenance: frequency characteristics check, ATT cleaning, terminal cleaning. (Detachable unit)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input, 50 W, output, sound pressure level, 97 dB, crossover frequency, 1.6 kHz, impedance 16 ohms, W690 x H1,018 x D485 mm
Both the inside and outside have been brushed up for a beautiful finish! Altech's 4-way speaker 6041 will be in stock for the first time in a long time. It is a system aimed at a wide range by adding a superwoofer and tweeter to the 2-way coaxial 604-8H. The way it sounds with a sense of unity like a full range is alive and well. The sense of speed that is a bit different from JBL, and the exhilarating sound that pushes out all bands is an appeal that cannot be enjoyed anywhere else. Serial 0183/0184 (Tamura Eiji)
Maintenance information: 2026.2.3 Maintained (exterior cleaning/touch repair. Woofer maintenance: resonance repair, terminal cleaning. 604-8H maintenance: low frequency resonance repair and terminal cleaning, high frequency side magnetic circuit gap cleaning/center adjustment, terminal cleaning. Network maintenance: ATT cleaning, replacement due to damage to one side of the terminal. The unit is detachable.)
Accessories: saran net
Main specifications: used unit 416-8BSW (sub woofer), 604-8H (coaxial 2-way), 6041ST (super tweeter) efficiency 100dB impedance 8 ohm crossover frequency 350, 1,500, 8,000 Hz W630 x H1,140 x 470 mm 95 kg
Maintenance has been completed for the main volume and various switches, such as disassembly, polishing, and cleaning! Sony's classic 333 series model. The strengthened power supply makes the sound pressure feel solid and slightly appealing. Sounds with a sense of weight proportional to appearance are unique to this era. As for the phono circuit, you can enjoy the thick, sharp sound of analog discs with both MM and MC. There are line scratches and bumps on the exterior. Also, there are collapses and creases on the side panels. Serial 203598 (Tamura Eiji)
Maintenance information: 2026.2.3 Maintained (main amplifier section FET, adjustment volume, deterioration resistor replacement. Switch disassembly and polishing (input selector, direct, mode, speaker, recout, muting, subsonic, turnover, cartridge selector) main volume dismantling and cleaning. Output relay replacement. Earth terminal repair. Solder repair. Internal inspection and cleaning, pin jack polishing, bias adjustment, running test. *Please note that if you turn the SP terminal more than necessary, it will break. (The relay operates for about 15 seconds.)
Accessories: none
Main specifications: 105W+105W (8Ω) with phono MM/MC W470 x H165 x D435 mm 21.2 kg
Made in 2024! An entry prime amplifier that inherits the high sound quality technology of the NE series. Equipped with a Bluetooth function, it is possible to play content from smartphones, etc. In addition to 4 analog inputs and a Phono input compatible with mm cartridges, it is equipped with 1 coaxial digital input and 2 optical digital inputs. The exterior is beautiful with no noticeable scratches. Serial BLC27241122029 (Tamura Eiji)
Maintenance information: 2026.2.3 operation confirmed
Accessories: remote control, instruction manual, original box
Main specifications: rated output 45W/8Ω/70W/4Ω, compatible impedance 4Ω to 16Ω, playback frequency band, 5Hz to 100kHz, W434 x H122 x D307 mm, 7.4 kg
Maintenance has been completed, such as dismantling and cleaning the main volume and disassembling and polishing of each switch! It has a thick mid to low range typical of Sansui, and the base line that clearly reveals the outline is an appeal unique to the KX series. There are small scratches on the exterior, but it is a beautiful individual for its age. Serial 602126306 (Tamura Eiji)
Maintenance information: 2026.2.1 Maintained (main volume dismantled and cleaned. Switch disassembly and polishing (input selector, power amplifier direct, source direct, reck-out, tape) push switch disassembly and polishing (tone, subsonic, loud noise, processor, MM/MC) output relay replacement. Replace the protector capacitor. Repair the main parts of the solder. REC cover attached (Interior and exterior inspection and cleaning, operation confirmation)
Accessories: No accessories
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
PSE standard 3P power inlet pluglin uses a high-tech alloy that boasts 2.5 times the conductivity of bronze as the material. High quality power plug compatible with broadcasting stations and recording studios (Tamura Eiji)
Accessories: case
Main specifications: 3P power inlet plug conductor material, domestic copper alloy (1.5 times the conductivity of phosphor bronze), body material, impact resistant polycarbonate, 86 x 29 x 22 mm
Solid brass is used as the electrode material. Barrel finish with polished finish Artisan barrel buffing and plating You can enjoy the change in sound with just one plug. (TAMURA Eiji)
Accessories: case
Main specifications: Blade: brass plating: unplated barrel polishing cable suitable outer diameter: 8 mm to 16.5 mm maximum cable compatibility gauge: AWG10 (5.5 sq)
It is a completely professional power plug that is compatible with PSE standard broadcast stations and recording studios. A high-tech alloy boasting 2.5 times the conductivity of bronze is used as the material to create a powerful sound. (TAMURA Eiji)
Accessories: No accessories
Main specifications: anti-impact polycarbonate, approx. 86 x 29 x 21 mm, weight approx. 34 g
Comes with original box! A wireless multi-room high-resolution music streamer that is very convenient to have. As a Roon Ready compatible machine, it also supports full MQA decoding. It is an inexpensive car with high sound quality and excellent cost performance. The exterior is dull. Serial K225N130JPNB7013 (Tamura Eiji)
Maintenance information: 2026.2.1 operation confirmed
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: Compatible audio file formats: MP3, AAC, WMA, OGG compatible high-resolution sound source formats: WMA-L, FLAC, ALAC, MQA, WAV, AIFF Native sampling rate: maximum 192 kHz bit depth 16 to 24 W220 x H46 x 146 mm weight 1.09 kg
After the inlet plug barrel is polished using thick-walled silver+rhodium on PSE standard phosphorescent bronze, craftsmen carefully buff each one, perform a mirror finish, and then silver+rhodium plating treatment is applied (Tamura Eiji)
Accessories: case
An inlet plug that uses a PSE standard polycarbonate body and a high-tech copper alloy blade holder. (TAMURA Eiji)
Accessories: case
Main specifications: Inlet plug high-tech copper alloy surface treatment is hard gold and hard rhodium dimensions 86×29×22mm rated 10A 250V AC
An inlet plug that uses a PSE standard polycarbonate body and a high-tech copper alloy blade holder. (TAMURA Eiji)
Accessories: case
Main specifications: Inlet plug high-tech copper alloy surface treatment is hard gold and hard rhodium dimensions 86×29×22mm rated 10A 250V AC
The disposal price has been reduced! Member prices are not applicable. 2025/11/27 Sales price 3,000 yen ※1 bottle only. Clarion's 15 cm full range unit. The details are unknown, but the sound is less peculiar. (TAMURA Eiji)
Maintenance information: 2025.11.27 sweep check OK
Accessories: No accessories
Key Specifications: 15cm full range unit 8Ω
The price has been drastically reduced! 2025/11/26 sales price 8,000 yen This is a STAX condenser type (CP-X) arm pipe. There aren't many single items in stock, so don't miss it (Tamura Eiji)
Maintenance information: 2025.11.26 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2025/7/18 sales price 8,000 yen This is a record player cabinet from an unknown manufacturer. The hole size is 353 mm wide and 323 mm deep. You must drill the arm holes yourself. There are many scratches and screw marks on the exterior. (TAMURA Eiji)
Accessories: No accessories
Main specifications: W520×H260×D421mm
Maintained! This is a compact, space-saving quad preamp 34. It has a supple and delicate expressive power that is not inferior to the 44, which is a higher-level model. The supple, uncharacteristic character goes well with vacuum tube power amplifiers. As for the exterior, there are rust spots and line scratches on the top plate. Serial Q030141 (Tamura Eiji)
Maintenance information: 2026.1.31 Maintained (internal check, coupling C, bypass C, etc. replaced. Through-hole pattern check. Operation check)
Accessories: power cable
Main specifications: PHONO (MM compatible) module switchable type W321 x H64 x D207 mm 3.2 kg
The speaker cable uses a precision conductor “102 SSC” with Y-lug specifications at the 1.5m pair end. It is characterized by its sharp and responsive sound. There is a thread on the sheath (Tamura Eiji)
Maintenance information: 2026.1.31 continuity confirmed
Accessories: No accessories
The disposal price has been reduced! (Member prices are not applicable) 2025/12/20 sales price 148,000 yen ※ It is cheap because the meter is defective on one side (there is a meter difference between the left and right, and the starting position is not 0) Maintained! The final model of Ampzilla. A representative American sound with strong, tight low frequencies! The dry, clean-sounding character is the perfect match for vintage speakers of yesteryear. This is a masterpiece machine that briskly drives famous speakers from JBL and Altec. The exterior is dull and dirty. The fuse holder has been replaced with a black one. Serial 104730 (Tamura Eiji)
Maintenance Information: 2025.12.3 Maintained (fuse holder replaced. Meter switch disassembly contact cleaning. (*The internal movement of the meter was poor, and the meter was disassembled, but repairs were not possible)
2022.5.12 Maintained (fuse holder lock claw adjustment. Replace the fuse. 0 point meter adjustment Offset voltage, idling current adjustment. (Other internal inspection voice check)
Accessories: No accessories
Main specifications: 200W+200W (8Ω) perfect balance configuration W445 × H178 × D229 mm 22.7 kg
※1 bottle only. A 30cm woofer unit attached to representative series from 4311B to 4312MK2. This unit is representative of JBL. It makes me feel the good overhang, which is typical of JBL. How about for spares, etc. There is dirt on the corn paper. (TAMURA Eiji)
Maintenance information: 2026.1.29 Operation confirmed (there is a slight distortion around 1k, but there is no problem with music playback.)
Accessories: none
Main specifications: 30cm woofer unit, maximum input, 75W, sound pressure level, 89dB, playback frequency band, 40-3kHz, recommended cross, 1.5kHz, impedance 8Ω, diameter: 310 x depth: 107 mm, 6 kg
This is a natural wooden stand board for the Elp laser turntable. It plays a role in blocking vibrations, etc. There are line marks on the exterior. (TAMURA Eiji)
Main specifications: W470 x H30 x D446 mm 2.8 kg (actual measurement)
Maintained! Model equipped with a balance input board. It is a famous historical machine that is both thick and sharp with little coloring. This is a best-selling model that is thicker than the later 38L, and enables 4 levels of gain control with internal switches. It is cool and heavy yet has a sense of delicate control, and its depth of pocket is attractive. There are scratches and scratches on the exterior. (TAMURA Eiji)
Maintenance information: 2026.1.30 Maintained (Balance switch 1.2 dismantled and cleaned. Each part inspection/operation check) 2025.7.14 Maintained (2 fuses were replaced due to disconnection and deterioration. Since deterioration of 33 capacitors and 14 semi-fixed resistors was seen, they were replaced. Since some solder has deteriorated, solder correction has been carried out. (Inspection and adjustment of each part and operation check OK)
Accessories: connection cable, power cable, LEMO x 4
Main specifications: dual mono configuration stereo preamplifier unbalance 6dB/12dB/18dB balance12dB/18dB/24dB main body W444 x H74 x W333 mm 4.5 kg power supply unit W194 x 74 x 333 mm 3.6 kg
The price has been reduced! 2026/1/22 sales price 19,800 yen ※ It is cheap because the veneer is in poor condition such as rolling or peeling. This is an electrovoice commercial speaker. You can enjoy a punchy sound at a low cost. The exterior has peeling, rolling, and scratches on the veneer sheet. Serial 818930/824756 (Tamura Eiji)
Maintenance information: 2026.1.22 sweep check OK
Accessories: none
Main specifications: 2-way bass reflex type, rated 80W, input impedance 6Ω, W270 x H400 x D215 mm, weight approx. 8.0 kg
The price has been reduced! 2026/1/29 sales price 99,800 yen ※The display is cheap because there are places where it is extremely dark. Genuine AXISS A full-spec D/A converter compatible with almost all digital inputs. Equipped with an ESS Sabre 9016DAC, the sharp and vivid sound is impressive. Compatible with DSD5.6MHz/PCM384kHz/32bit USB input. Equipped with a balanced headphone amplifier, it is a model that incorporates current progressive audio all at once in its body. The digital input is fully equipped with high-resolution asynchronous, USB AES/EBU, Toslink, and coaxial. This is the best-selling converter with a reputation for sound quality. The front input display is quite dark, and TOS and COAX are quite dark. Also, the notation on the VOL side is slightly darker than on one side. Serial PDAC131 0021608 (Tamura Eiji)
Maintenance information: 2026.1.29 Operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable
Main specifications: DSD2.8/5.6MHz USB (PCM): 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz S/PDIF (PCM only): 44.1, 48, 96 kHz W365 x H103 x D328 mm Weight 5.5 kg
The price has been reduced! 2026/1/28 sales price 59,800 yen remote control is out of stock. A new standard model that inherits the specifications of the company's reference Hi-Fi series. It is equipped with various specifications, including a DIDRC module that reduces dynamic noise, and is finished as a product that is one piece superior to the lineup in the same price range in terms of resolution and functionality. There are some scratches and line marks on the exterior. Serial 3476JJ97X0020793 (Tamura Eiji)
Maintenance information: 2026.1.28 Operation confirmed
Accessories: power cable
Main specifications: rated output 140W+140W (4Ω) 75W+75W (8Ω) PHONO (MM/MC) equipped [input-compatible digital signal] 32, 44.1, 48, 88.2, 96 kHz/16, 24 bit (2 chPCM signals/coaxial only can be input up to 192 kHz) W435 x H174 x D431 mm 18.10 kg
The price has been reduced! 2026/1/23 sales price 54,800 yen These are sealed high-resolution headphones that use a 70mm caliber driver. A high-end machine that easily reproduces high-resolution sound sources with a wide range and high amount of information, and inherits the essence of advanced models. Please enjoy this high-performance machine without any complaints. (TAMURA Eiji)
Maintenance information: 2026.1.23 sweep check OK
Accessories: original box, instruction manual, connection cable
Main Specifications: Model: Sealed Dynamic Sensitivity 98 dB Magnet: Neodymium Playback Frequency Band 4 Hz to 100,000 Hz Impedance 56 Ohms Weight 340 g
Genuine JBL diffuser This item is recommended for those who have stocked or damaged it. There are no scratches or velcro peeling off. (TAMURA Eiji)
Accessories: none
*Currently sold. A speaker system intended for use with presence speakers such as Yamaha DSP systems. A 10 cm full-range cone type unit is used as the unit, and it is designed to be antimagnetic in consideration of AV use. There are dirt and small scratches on the exterior. Serial 102343/102344 (Tamura Eiji)
Maintenance information: 2026.1.29 sweep test good
Accessories: saran net
Main specifications: 2-way, 2 speakers, bass reflex system, bookshelf type, anti-magnetic design, 10cm cone type, playback frequency band for all bands, 100Hz to 20000Hz, output sound pressure level 89dB, impedance, 8Ω, allowable input, 20W, W140 x H300 x D107 mm, 1.62 kg/1
*Currently sold. A speaker system intended for use with presence speakers such as Yamaha DSP systems. A 10 cm full-range cone type unit is used as the unit, and it is designed to be antimagnetic in consideration of AV use. As for the exterior, there is dirt on the saran net. Serial 101255/ 101256 (Tamura Eiji)
Maintenance information: 2026.1.29 sweep test good
Accessories: saran net
Main specifications: 2-way, 2 speakers, bass reflex system, bookshelf type, anti-magnetic design, 10cm cone type, playback frequency band for all bands, 100Hz to 20000Hz, output sound pressure level 89dB, impedance, 8Ω, allowable input, 20W, W140 x H300 x D107 mm, 1.62 kg/1
This horn is designed for LE85 and LE175. Since the effective length of the exponential horn has been lengthened, the connection with the woofer is smoother. There are paint bald spots and paint deterioration. (TAMURA Eiji)
Accessories: none
Main specifications: throat diameter 2.5 cm, crossover frequency 800 Hz or higher, compatible models/LE175, LE85 horn total length 293 mm (horn depth only) dimensions W250 x H150 x D60 mm weight 2.7 kg
Chalk transformer pair sale 10h/120mA DC resistance 110Ω (measured 112.3/109.5Ω) W68 x H91 x D71 mm 1.6 kg/piece There are abrasions and dirt adhering in places (Kojima Yosuke)