An ultra-advanced speaker system that combines Epilogue 1 and 2 into a dedicated stand. It is no exaggeration to say that the vast scale, glossy and precise treble, and oversized volume with no sound blur will satisfy the hearts of all listeners. Female vocals in particular are a must listen. There is a big scratch on the bottom of Epilogue 2 (Sasaki Shota)
Maintenance information: 2024.5.5 operation confirmed
Accessories: original rack, manual, tools, power cable
Main specifications: 3 way 4 speakers W400 x H1200 x D800 mm (actual measurements including all)
Pair tube, CV25 equivalent tube, large triode tube, molybdenum plate (zirconium coating), measured IP value: 45/45 mA (the best standard IP value for this amplifier is 50 mA) with white box ※ sound is checked with a test amplifier, plate current values have been measured, and it has been determined that operation is good (Kojima Yosuke)
Accessories: white box
It is a model that uses PCOCC. It has a parallel 4-core structure with 2 inner cores for treble. The 2 outer cores are for bass. It features bright, crisp sound quality suitable for ROCK and POPS (Daiki Goto)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Key Specifications: Speaker Cable PCOCC Conductor
* Since it has been replaced with an Audio-Technica balance plug, it is inexpensive. Balance cable 1.0 m pair. The copper/aluminum/brass hybrid configuration, which is also a characteristic of the company, has high resolution and is an exciting sound that comes out quickly (Daiki Goto)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
AUTOGRAPH MINI is a masterpiece in the Prestige series. Uses a coaxial unit with a diameter of 10 cm and a baht laminated plywood enclosure. You can experience the small yet well-organized British sound. The exterior is good with little feeling of use due to dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: instruction manual, original box
Main specifications: coaxial 2-way bass reflex bookshelf speaker efficiency 88dB continuous allowable input 50W maximum allowable input 200W input impedance 8Ω crossover frequency 2.3 kHz frequency characteristics 68Hz to 54kHz enclosure material birch laminated plywood enclosure surface finish/solid teak, veneer W210 x H345 x D130 mm 4 kg
Maintained! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier. There are small scratches, dullness, and there are scratches on the cabinet (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Maintained! The popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units (Sasaki Shota)
Maintenance information: 2024.5.4 Maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced. Terminal area cleaning. Attenuator SW contact cleaning. Crossover 500Hz check OK)
Accessories: none
Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
Maintained! With a 7000 Hz crossover, this network is ideal for tweeters such as 075 and 077! Please enjoy using it in a way that suits your needs, such as 2 way or 3 way. Serial 35512 35917 (Sasaki Shota)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced, terminal part cleaned, 2 parts replaced for attenuator VR, crossover 7,000 Hz check OK)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Maintained! An introduction to Accuphase power amplifiers. Even though it was an entry-level model, its thin and stylish design was a popular model that was popular at the time. We don't choose preamps that combine with power amplifiers that feature delicate and elegant expressions. There is dullness and small scratches, but there are no noticeable scars (Sasaki Shota)
Maintenance information: 2024.5.4 Maintained (2 output relays replaced, 3 electrolytic capacitors replaced, 2 semi-fixed VR replaced. Solder correction, connector cleaning)
Accessories: manual
Main specifications: output 120W+120W (8Ω), 2 speakers can be connected, with mono changeover switch
W445×H131×D388mm 18.1kg
Maintained! A D/A converter that was said to be close to analog sound. The high frequencies are tightened, the mid and low frequencies are mild, and the sound feels powerful with a sense of directness. The high cost performance also shines (Sasaki Shota)
Maintenance information: 2024.5.4 maintained (21 replaced due to electrolyte condenser fluid leakage, electrolyte cleaning, pattern and solder correction, insulation washer replacement due to damage, sound and HDCD recognition checks on each input/output)
Accessories: manual, power cable
Main specifications: Input terminal/1 coaxial system, 1 optical system, ST link 1 analog output system (RCA) HDCD compatible D/A conversion chip using a multi-bit Barbrown PCM63P-K type W430 x H60 x D230 mm 4 kg
Maintained by the manufacturer! An analog player with the WE-308 mounted on the DP-6000. Denon Genuine Cabinet DK-100G This is one car that is characterized by SAEC's crisp and accurate sound images, and makes a versatile sound regardless of genre. There are sunburn marks on the cabinet (Sasaki Shota)
Maintenance information: 2024.5.4 manufacturer maintained (13 transistors replaced, electrolytic capacitor, FL tube lighting capacitor, AC cord, pin plug replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: Phase locked servo type direct drive (crystal control) AC servo motor turntable is 312 mm in diameter, made of die-cast aluminum, 33, 45, compatible with fine rotation, double knife edge, static balance, universal type, total length 329 mm, effective length 240 mm, overhang 5 mm, needle pressure 0 to 2 g
It is a preamplifier that can obtain more satisfaction than directly connected to a power amplifier in terms of sound image positioning, bass volume, and resolution. The cost performance is tremendous, and it is the best amplifier for serious audio projects in the future. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.4 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: line input RCA x 5 · TAPE x 2 · PHONO x 1 (MM/MC) line output RCA x 2 · TAPE out RCA x 2 size W431 x H99 x D337 mm weight 7.7 kg
Comes with PS-3 genuine stand sold separately! This model consists of BOSE's popular 121 small speakers and 242 woofers. The thickness of the low frequencies has been increased to 121, which has a tense sound. It plays pop and rock in a light manner. There is a dent on the stand (Daiki Goto)
Maintenance information: 2024.5.4 operation confirmed
Accessories: stand
Main specifications: 3 way, 3 speakers, Astimus system, bookshelf type, low frequency side, 16 cm, cone type, medium range side, 11.5 cm, cone type, 2.5 cm, cone type impedance 6 Ω, W310 x H760 x D270 mm, 17.85 kg/1 bottle (including stand)
A rare JBL 46cm woofer has arrived! The thick sound that can only be produced with a 46cm woofer is attractive. Please try this large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior has tape marks and magic marks on corn paper. Serial 181936/481666 (Sasaki Shota)
Maintenance information: 2024.5.4 sweep test good
Accessories: none
Main specifications: 46cm cone woofer unit impedance 8Ω 99dB frequency range 25Hz to 1.6kHz recommended enclosure volume 140 to 340 lit diameter 464 ✕ depth 212 mm weight 13.2 kg
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.7 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.5 m pair, LC-OFC class 1 conductor, long-selling product balance that can transmit pure signals has been produced for over 10 years. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
RCA cable 0.75m pair, a hybrid configuration of copper, aluminum, and brass, which is also a characteristic of the company, has a high resolution and an exciting sound that comes off quickly. It rubs against the sheath and is dull on the plug (Kojima Yosuke)
Accessories: none
Speaker cable is an extra thick cable using 12 pairs of 18-gauge oxygen-free high-conductivity copper with 2.9 m pairs of untreated straight wires. There is dirt and stickiness on the sheath (Kojima Yosuke)
Accessories: none
A standard machine that also supports 192 kHz/24 bit digital input. With the theme of improving speaker driving power, the power transistors on the power amplifier driver stage have been made larger, and you can hear sounds with a higher driving power with a sense of stability. There are no particularly noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, power cable
Main specifications: 40W+40W (8Ω) PHONO (MM) optical digital input 2 systems coaxial digital input 1 system W440 × H105 × D370 mm 7.8 kg
This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed)
Accessories: power cable
Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
A very simple CD/SACD player. The sound with fast response and low center of gravity is attractive. You can fully enjoy SACD-like spatial expression and highly transparent sound at a low price. There is a small scratch on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, power cable, instruction manual
Main specifications: playable media/SACD, music CD, CD-R & CD-RW (music format, MP3, WMA) W420 x H113 x D340 mm 11.0 kg
Among Sony CD players, this model is sharp and has a sense of energy. The sharp sound is fully compatible not only with jazz and rock, but also with modern typed sound sources. There are dullness and scratches on the main body, and discoloration can be seen on the stabilizer*The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: copy of instruction manual
Main specifications: 1-bit current pulse DAC, fixed optical system, zinc die-cast pickup base with 4 types of variable digital filters, frequency characteristics 2 Hz to 20,000 Hz, W430 x H125 x D375 mm, 15.2 kg
Maintained. A diatone preamp with a thick mid-range sound. The sense of extrusion in the low frequencies is also good, and the overall sound is energetic. Also, it is a unit with a full range of functions as a preamplifier, such as input gain adjustment and left and right independent tone control. The exterior has many scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel lever switch and other switch disassembly contacts are polished and contact cleaner applied. Volume contact correction. Power cord replacement)
Accessories: none
Main specifications: 2 mono construction system, special attenuator volume adopted, equipped with 2 PHONO inputs, 2 line inputs, W425 x H169 x D204 mm, 5.8 kg
Maintained, including replacing glass panels with new ones! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the appeal of the sounds of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is good without any major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel dismantling and replacement, meter, illumination lamp replacement, in-board C deterioration replacement, RCA cleaning, SW, VOL cleaning, operation check, backup power supply transformer pattern, relay pattern solder crack correction)
Accessories: remote control, copy of instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
The company's SONICA DAC remote control unit*Please check the manufacturer's website for operating environments, etc. (https://www.oppodigital.jp/discontinued-product/sonica-dac/)(及川 Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
※Cleaning solution is not included. VPI's classic vacuum record cleaner. Attach the record to the turntable, apply cleaner liquid, clean it with a brush, and then use a vacuum method to strongly suck fine dust and dirt that has entered the disc's groove. There is a dent in the corner
Maintenance information: 2024.5.3 operation confirmed (rotation, vacuum OK)
Accessories: instruction manual, power cable
Main specifications: W394 x H235 x D362 mm 12.7 kg
※Inexpensive because there are scratches and paint peeling. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
The price has been reduced. 2024/5/3 sales price 99,800 yen Hi-Res compatible USB-DAC, DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg
Maintained! A VT-4C single amplifier built into the Suzurando SL-990 chassis. The transformer is equipped with a Tango X-10S pair, MS-210DR, and CH-12-200D. I am overwhelmed by the strong sound pressure that seems to push it to the front. If you combine it with a large horn system, etc., you will be addicted to the pleasure of being bathed in music (Kojima Yosuke)
Maintenance information: 2024.5.2 maintained (relay disassembly repair · block capacitor 47 μF x 2 other deterioration replacement 2 units · resistance 1W deterioration replacement · 3 x ham balance volume addition · resistance 5 W addition · bridge diode addition · power supply switch deterioration exchange · electrolytic capacitor 68 μF noise exchange · 2 film capacitor 1/2 W noise replacement · 3 resistor 1/2W noise replacement · 3 resistor 1/2W noise replacement · Operation check with AC 100V (rated output 12 W, measured at SP: 8 ohm*BIAS and HUM BAL. on the back side have been adjusted. (Please adjust only when the output tube is replaced)
Accessories: power cable
Main specifications: W500 x H270 x D275 mm 36.7 kg (actual measurement, not including protrusions)
This line improved the design of Revisona, which is a 1.2 m pair multi-solid core alloy front line for phono cables. You can enjoy pure, dynamic sound just like a PAD. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.2 continuity confirmed
Accessories: none
Maintained! Line-specific control amplifier with balanced output. The technology cultivated with professional equipment is summarized in a simple configuration. It is a sound that connoisseurs like, with both the amount of information and thickness. There are line scratches on the top plate and dirt and tears on the instruction manual ※The balance output is 3rd hottest (Mizusaki Ryo)
Maintenance information: 2024.5.2 Maintained (cleaning is not possible because each SW and VOL are sealed types. Only detergent spray cleaning from gaps, variations in capacitor capacity within the board → replacement. RCA earth float → cleaning, operation check (the gap cannot be completely removed) *In the future, it will not be compatible if the dedicated parts are defective.)
Accessories: instruction manual
Main specifications: 6 line inputs, 1 balanced output system, 1 unbalanced system, W431 x H95 x D400 mm, 5.9 kg
with Ortofon OM-10! Specially designed for the Pro-ject belt drive player ESSENTIAL 3 A model commemorating the 50th anniversary of the release of The Beatles' masterpiece concept album “Sgt. Pepper's Lonely Hearts Club Band.” The same design as the bass drum on the album jacket can be seen through the acrylic platter. There are many abrasions on the dust cover. Serial 17S059046 (Murakoshi Yoichi)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: power cord, EP adapter
Main Specifications: RPM 33/45 r.p.m. RPM RPM deviation 33 ± 0.70% 45 ± 0.60% WOW Flutter 33 ± 0.21% 45: ± 0.19% S/N Ratio − 66dB Tone Arm Dimensions 8.6 inch (218.5 mm) Overhang 22.0mm Power Consumption 4.5 W Power Adapter 15V/500mA DC Size W (width) 420 mm x H (height) 112 mm x D (depth) ) 330mm weight 5kg
The price has been reduced. 2024/5/2 sales price 99,800 yen SACD multi playback player. HDMI compatible A player with a core that looks like it was made by Sony and makes you feel that the range is wide. The high quality that can be relied upon as a playback device in everything is attractive. Equipped with a super audio D/A converter with a DSD filter+multi-level D/A converter system. There are line marks and dents on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: remote control, power cable, copy of instruction manual
Main specifications: [during SACD playback] Playback frequency range 2 Hz to 100 kHz, frequency characteristics 2 Hz to 50 kHz (-3 dB), dynamic range 110 dB or more, total harmonic distortion ratio 0.0012% or less [during CD playback] frequency characteristics 2 Hz to 20 kHz, dynamical clean 100 dB or more, total harmonic distortion ratio 0.0017% or less L [digital output] HDMI x 1, optical x 1 (CD only) [analog output] XLR x 1 ・RCA x 1 W430 x H124 x D390 mm approx. 10.2 kg
One owner item, in excellent condition! Comes with option base JSB-1 (90,000)! The flagship speaker DD66000 commemorates the 60th anniversary of JBL's founding. A high-end machine with a high level of freshness and modern spatial expression. In addition to the low range with a well-extruded core typical of JBL, the texture of the mid to high range is also overwhelmingly high, so you can immerse yourself in the music with peace of mind (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: instruction manual, short strap wrap, genuine spike base x 8, JSB-1 optional base x 8
Main specifications: Rosewood unit 1501Al x 2/476be/045be-1 playback frequency band 45Hz to 50kHz impedance 8Ω output sound pressure level 96dB W965 x H1,109 x D469mm (without spikes) 142 kg
Luxman's blockbuster MM/MC phono equalizer amplifier is still highly popular. Clean sound with a good S/N ratio with a 3-circuit all-discrete configuration of MC head amplifiers, RIAA amplifiers, and output buffer amplifiers. The sound with excellent gain and a sense of relaxation is attractive. The exterior has dents, small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: instruction manual
Main specifications: mm/MC independent NF type equalizer gain mm36dB MC62dB input sensitivity mm4mV/MC0.2mV compatible impedance mm10kohm or less/MC40Ω or less input impedance mm50kΩ/mc200Ω w126 × H183 × D421 mm 6.8 kg
※Saran net is out of stock. The inside and outside including the unit have been refreshed and maintained! It is an attractive L36 with a thick mid-low range expression typical of Alnico. An overhanging, thick analog sound unique to JBL from the 70s. The size is also reasonable, so I recommend it to those who like the American sound of this era. The exterior has been beautifully finished due to maintenance.
Maintenance information: 2024.5.1 maintained (enclosure polishing, oil/wax coating, baffle coating, woofer maintenance: edge replacement, cone paper coating midmaintenance: corn paper tear repair/cone paper coating, center cap dent repair, magnetic circuit gap cleaning/center adjustment tweeter maintenance: center cap dent repair/cone paper coating)
Network maintenance: frequency characteristic check, ATT cleaning, terminal replacement
Detach the unit
Accessories: none
Main specifications: 3-way 3-speaker bass reflex 125A LE5-6 LE25-2 8Ω 89dB natural oak finish W34 x H61 x D35 cm 20.0 kg
Orthophone mono cartridges. It's a cartridge that allows you to fully enjoy the heavy sound of a mono disc. Serial 018020 (Tamura Eiji)
Maintenance information: 2024.5.1 operation confirmed
Accessories: needle cover
Main specifications: output voltage 3 mV frequency characteristics 20 to 20,000 Hz 47 kΩ internal resistance 100 Ω diamond needle suitable needle pressure 3.5 g dead weight 30.5 g
Digital cable 1.0 m pure silver conductor uses high-foam polyethylene and Teflon as insulation materials. Heavyweight pin plugs made of machined copper alloy are used. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box
Maintenance has been completed, including removal of internal glass fogging! The company's first model equipped with a digital panel. The sense of S/N has increased, and the sound is deep enough to be compatible with modern speakers. The high range has also been widened, and while every band remains clear, it makes you feel the thickness typical of McKinn. Detailed settings are also possible with the 8-band equalizer. (MIZUSAKI Ryo)
Maintenance Information: 2024.4.30 Maintained (glass panel fogging cleaning. 8 Tone VR ✕ pieces have been disassembled and cleaned.
Operation check OK)
Accessories: power cord, remote control, instruction manual
Main specifications: digital volume type 8-band equalizer line input 9 systems (RCA x 8/XLR x 1) phono (MM) input 1 system line output 3 systems (XLR/RCA) W445 x H150 x D470 mm 11.5 kg
This is a super dreadnought mono power amplifier. Recommended for those who want to drive large speakers! The sound quality is natural and clearly expresses delicate parts. It is a power amplifier that has driving power and allows you to feel comfortable and at ease. There are small scratches on the exterior, but it is generally good (Ryo Mizusaki)
Maintenance information: 2024.4.30 Maintained (meter acrylic removed, internal glass fog cleaning, all front lamps replaced. (Check that the lamp is on)
Accessories: power cord, instruction manual
Main specifications: 1200W (2/4/8 Ω) speaker output 1 system x 3 (2 ohm x 1, 4 ohm x 1, 8 ohm x 1) input terminal RCA x 1 system, XLR x 1 system, W445 x H313 x D540 mm 66.7 kg/unit
Output transformer sale push-pull output 15 W primary: 8 kΩ secondary: 4/8/16 Ω W97 x H80 x D86 mm approx. 1.9 kg/piece (actual measurement, not including protrusions) There is a dull item with the original box, but it seems to be an unused item due to the condition of the terminals!
Accessories: original box